Rust-Oleum Trim and Bumper Paint Review
HTML-код
- Опубликовано: 12 сен 2018
- In this video I will be reviewing Rust Oleums Trim and Bumper Paint on the 2006 Jeep Grand Cherokee. I have never used it before and was real interested in how it would look. Much to my surprise it turned out great.
If you are not subscribed please do and hit that bell so you never miss one of my videos. 
Авто/Мото
I've used this 1000 times. Not only does it make your trim look new again but it lasts it doesn't fade!
I agree! It lasted close to 4 years on the Jeep.
@@FABAutomotiveDetailingSo is it more black than grey? Some of these like the one I got by Dupli has more of a grey appearance
@@Titanic19127 Yes it is definitely black not gray
@@FABAutomotiveDetailing Mine is still sticky after 2 days. How would you go about fixing that? Gloss finish?
Thanks I’m going to dye my hair with this product
Mikeoo Good luck!
Fucking dying 😂
That would be a very durable look
Hilarious! Just before I read this comment an ad for hair dyeing popped up. LOL
Where's the before and after
I have used Rustoleum truck bed coating on plastic trim in the past. It gives it a flat look and it adds non skid texture. The initial application took about 4-5 years before it started pealing/ got faded.
When painting something with holes, like that cowl screen, it's best to paint the inside first, then flip it and do the outside
I like to use the truck bed coating that sprays out of the can for my black trim it gives it more of a rugged textured look and still last.
Nice job! I'm restoring a 1997 Land Rover Discovery 1 and just had the front bumper powder coated with a shinny hammered look, which looks fantastic. Now I'm trying to determine what to use on the plastic ends of the bumper and will consider the Rust-Oleum, but some people tell me the Forever Black works just as well if not better. It is not a spray, it has a square foam tip and when you squeeze the bottle the form gets wet and you apply it. It too looked great when I was finished.
I've used forever black and after about a year it faded. 3 coats on my rear caps on my 00' XJ
I’ve tried every type of product I could find to restore my Bushwhacker fender flares on my Jeep. I’m going to try this out tomorrow. Thank you!
Erica Kinley You are welcome!
nice video I'm getting ready to start my wipers arms,window trim ,bumper pads etc.
Thank you . I was looking for this video
Ibrahim Nasser You are welcome!
We have a 98 Dodge Ram 2500, I tried this on it and it looks so much better. Thanks for the video. We'll see how long it will last but it is worth the try.
DeckofReason You are welcome! The Jeep has held up awesome over the last 2 years.
Good review! Look forward to the update.
Jorge Maese Thanks! I plan on doing a 6 month update next month
Thanks! I'm gonna try it
robert frank You are welcome!
Thanks for the video! Greetings from Shelby county, Indiana!
You are welcome! I’m just up the road from you
Instead of primer I used fine wet/dry sandpaper. Used several light coats. You want to see the old come through on the first coat. Light is Right
Sir, I felt bad leaving your video @ 09:34, and then you responded. I think my count was including the commercials before the video, BUT I came back, and watched past that point. I think that you did a great job / objective in your review, and stating what you could have done that may have made it better. Bottom line You did a good jo, and I thank you for your work. Thumbs up,, but no sub just because I only wanted content on trim painting for my wife's vehicle. Thanks for you r kind note. Best wishes to you and your wife, for a Merry Christmas, and Happy New year! From Orlando, where any paint will be quickly cooked.
john swilley I appreciate you coming back and watching! FYI it has been on for over a year now and not garage kept and it still looks as good as the day I painted it. I haven’t done any touch up or added any dressing to it. Thank you and I hope you have a Merry Christmas and Happy New Year also!
Great review....thank you!
Nice Video, Going to try this product on my 2001 Chevy S10 LS 4.3L.. Plenty of fading trim, Rear Step Bumper Instep & Wiper Cowling..This Florida Sun don't help..! Thanks !
Thanks for your video, I'm looking to do my 15 rav 4 trims and bumper. 👍🏽
Cisco B Castro You are welcome! It is really good stuff and holding up great a year later.
@@FABAutomotiveDetailing - How is holding up after year 2?
AssHattery Engaged Holding up great! I have a 2 year update on my channel in the recent videos.
my last three vans all had large parts of dark grey plastic trim all around the bodywork, I've always used either black boot polish or carpride back to black type products but after a few trips driving about in the rain it always just wore off and all the trim always looked just as bad as it was before, I found this out by accident recently the last time I cleaned my latest van, I'de ran out of Mr Sheen and boot polish but had a bottle of white spirit and a half bottle of Boiled Linseed oil in the shed so I wiped all the plastic trim down with the white spirit using about half a roll of paper kitchen towel to get rid of all the dirt and tar spots and rubbed it all over with the boiled linseed oil using a microfibre cloth... the best result I've had to date. cost me £2 for the bottle of white spirit and a microfibre cloth from Poundland & £4.80 for the bottle of Boiled Linseed oil from my local Seagers store with still loads left left in the bottle.
Mickey Flynn Thanks for the I info! I have some linseed oil I use on wood rifle stocks I refinish. So far the paint though is holding up great.
Im planning on usinh it would it be better to apply a layer of adhesion promoter priar to using the bumper paint?
Thanks for the great video! Appreciate it!
You are welcome!
@@FABAutomotiveDetailing I'm looking for a good bumper paint for my faded out bumpers on my car to withstand the Florida heat. From you're video this stuff looks pretty good! Does it have a gloss shine to it?
@@HanzelFonferek No shine at all it just looks new. It made it 3 years on the Jeep and it was never garage kept.
@@FABAutomotiveDetailing Ok, thanks! Happy Thanksgiving! 🦃
Hi there! - You mentioned in your video that next time you prefer to sand the piece prior to paint. What grit sandpaper would you use to sand automotive trim and what technique? Thanks!
Use green scotch brite
Looks good tfs buddy
Thanks! Stuff is easy to use with great results!
your effect is great! pls make more videos thanks
randika bandara Thank you! More videos are coming
I've used it I used to put three coats on and then one or two coats of usually flat clear enamel and that enamel seems to it's clear coat you know so it seems to really keep the UV fading away I think I've done one that's 10 years old now and it still looks good
I had great results with fusion of plastics (satin black)
330turbo Never heard of that
Wow they turned out so nice! I am wondering the same thing about if there is any difference between it and normal paint. Also really curious how it will hold up but personally it’s paint so it should hold up good! The Jeep looks so much nicer especially from the back with black plastic trim is stead of the faded plastic! Great video brother!
MeanBee392 it did turn out good! Better then I thought it would. I also think it will last a while since it’s paint. Thanks brother
It is simply a paint but with a priming additive. Plastic surfaces are usually rough anyway so there won't be as any issues with adhesion. I was using this stuff on my truck to paint the bumper covers and bed rail covers. It wasn't a full can so I ran out. I was able to finish with the same brand black in satin finish paint. It is all still holding up the same
Can you use white instead of black ? Looking to get rid of the old faded plastic look on bumper and color match somewhat
Haha 4:00 i'am in the video . You guys have a nice veiw in the backyard .Maybe after few weeks vrp shoud work that be a great video for you to make. The trim came out nice.
Ouzo Lou Garage Yes you were! Haha I might try vrt on it in the future. Thanks it definitely looks better!
How long did the product last until it needed another touch up with paint, please?
Its 2:20 am & i wanna get out & work on my truck already , do you think it’ll work on my side steps they’re chrome but if i sand them down ?
Just used this stuff to black out some parts on my 4runner. And yes...Indiana weather. Nice grass.
Its Just Jeremy Yo It is a good product and is holding up nicely! Indiana weather is strange. Thanks
Thank you for sharing.. granny from the Phils.
You are welcome!
I have an 07 Pontiac vibe. The trim makes up 75% of the car and tires of products lasting around 5-6 weeks.
I was tempted just to find a spray paint and go to town!
Permanently black that way!!
This would be a great option for you
@@FABAutomotiveDetailing
I’m having an eternal debate and not good spraying (or my spray technique is lacking)
I wouldn’t mind paying 100-200 for someone to do it for me. But 1000-1500 for a body shop isn’t happening right now. :(
I bought a used front bumper for my Subaru,it had some oil or power steering fluid on it ,after it sat over night I checked it to clean it and wow it has stained it and has a white calcium deposits on it ?
I just used this product last weekend on my tundra, it looks really sharp but I did 5 coats as opposed to the recommended 2 coats, didnt even out until the 5th coat
C Smith It’s been on for 2 years now and still looks just as good as the day I applied it.
@ C Smith. Curious as to how yours is holding up with the 5 coats instead of 3
@@jiveturkey936 it still looks good today, absolutely no peeling, it was on a primer black plastic peice though, never had paint on the part before. There's a little bit of sun discoloration but hardly noticeable
What part of the tundra did you paint?
@dirtnsmores top plastic cap for front bumper. Couldn't find the color matched spray paint like it was before so just went with this product. Mind you the cap was brand new and unpainted. Still today there's no peeling
Hey man nice video. How would you paint an exhaust tip a gloss black or chrome black ?
Mimikyu The Pokemon Thanks! You will need a high temperature paint like engine paint in gloss black. That’s how I would do it.
Have the exact same jeep and year 06 but blue what your doing to yours I'm doing to mine. Thanks
I really like Solution Finish. It leaves a stock satin finish that lasts for months.
Solution Finish does work great for temporary finish but this lasted almost 4 years after this video was made.
Nice improvement.
TheMaskman74 Yes it makes the plastic trim look new again.
Nice job brother
Thanks!
Thanks for the video, I hope it will stay black got to do my véhicule soon i think to use that product.
christian fournier It’s been almost a year and half and it still looks like the day I did it.
Was looking at this today and wondering how it worked. Thanks for the video, guess I got trim on 2 durangos to paint.
So I replied to this comment earlier and thought is was a different video of mine. This stuff works great. It’s been over a year and it still looks just as good as the day I did it. If it’s trim on the car you will have to mask off before painting.
Of course, I'll be removing all that I can, luggage racks, runnings boards and such. I will have to mask around the door handles.
@@FABAutomotiveDetailing or if you able to remove it first to make it safer.
That is a beautiful back yard where are you located? Do you think plastic adhesion promoter should be used with this paint? does this paint have a texture? or dies it have a rubber ish feel?
I bought a rear diffuser for my miata , alcoholed to clean , 400 grit to scuff , plastic adhesion promoter spray and rust o leum matte blavk spray good for plastic , ive noticed ive needed quite a few resprats to get uniform coverage .
I want to use this on my xterra. Would you prime it first or do you think I can spray it straight on like you did. I just don't want it to peel off later.
It’s been 3 years and mine is just starting to fade again. Mine never peeled or anything. It’s really good stuff
For plastic trim: try using NanoSkin Awsome Black
Thank you so much
Hey bro, I watched this video while back came back to see your professional spraying techniques. Is it still holding up or did you have to apply it again after couple months ?
I forgot to ask you last time you where on live . Thanks .
MR.4-4-85 Thanks but I am far from a professional sprayer! 😂 It is still holding up great. I check it everytime I wash and it still looks like I just did it. You are welcome
Rust oleum is underrated. It can last a really long time in most cases
Nice vídeo sir.I don't know it needs to spray adhesion promoter and then the trim and bumper paint.and can I spray clear coat. ??
Thanks! I didn’t spray an adhesion promoter and it lasted over 3 years.
Will this paint work on the plastic Aero wheel covers on my new Tesla Model Y. I want to paint them completely matte black.
Thomas Jacques It is made for plastic so it will probably work.
Man, that looks 🔥! What kind of black dye would you use on a gray lower bumper?
looks better for sure, be interested in how long it stays like that...
DSW Joyride Productions Thanks! Yeah I am interested in longevity as well. Thanks for watching
Just watched this. It's been a while since you sprayed. How long did the Rust-Oleum Trim & Bumper paint actually last?
Jesse Parris It is still holding up strong. It still looks like it did the day I painted it.
@@FABAutomotiveDetailing thanx for replying to that question
Need to do it on my 2nd gen crv Thank you!
Hey thanks for the video! I have tan trim and rocker panels and am gonna spray them with this, would it be the same process for a tan to black or would there be different prep work?
You are welcome. It would be the same it just may take more coats.
@@FABAutomotiveDetailing Ok great, I another question. My rocker panels are part of the truck and are aluminum do you think this spray would work fine for them too? I know its not plastic trim so im second guesting myself...
@@doncorleone9442 I don’t know how it would react to metal since it’s designed for plastic
Nice video man. Think ill be giving this a try on my door handles. Maybe a clear coat over that would help with longevity 🤔
Hasty Hemi Thank You! It works great and the clear coat is a great idea.
FAB Automotive Detailing does a clear coat say lawyer thinner on it ?
You can use a heat gun on low to bring the oils back to the surface of the plastic, then with 303 to uv protect it so it lasts way longer than rattle canning it.
Nate Wood I have seen videos on heating it up but have heard that it eventually won’t allow you to apply a dressing and looks worse when it comes back. I don’t know how true that is like I said I was told that I have never tried it.
I tried it on my Chevy.
It did bring it back but it didn't hold up well.
When I tried a dressing after using the heat gun method the plastic didn't take the dressing anymore so I pretty much runed them.
They looked great when I first did it though.
Whats 303?
I used this and it had a green shade to it in the sun
Nice job. For the rest use Solution Finish! I Hope that would help. Cheers from Toronto
sami etbarek Thanks! I have not heard of solution finish so now I will have to look it up. Haha I already used Adam’s VRT and Griot’s Trim reconditioned on the other pieces. Thanks for the advice I will look I to it.
How would you remove this? After 1 year of spraying it? I’m trying to wrap my bumper and I can’t remove it
I have never tried to remove it so I’m not sure. Try paint thinner that might work.
Did my '05 Subaru Forester 2 years ago and with its crapload of black trim and bumper it is holding just fine. IMO to heck with the expensive "trim restorer" products out there, give me a $6 can of spray paint anyday.
I agree 💯! The trim on the Jeep still looks like the day I painted it going on 3 years now.
Did it last on longevity
Thank you!!!
Clare Butterfield You are welcome!
Hi! Can anyone tell me how this product feels after painting? Smooth and soft, like a gloss would be or rough / sandpaper like a matte paint would be? Thanks
I did a few pieces on my car and it doesn't seem to add any texture. The plastic trim just feels like plastic trim, only black again.
Does it smell like other aerosol paints?
Very cool. I heard taking a heat gun to trim brings it back to color too.
rizkybiss I have seen people do it like that but I heard it will fade again and won’t take any dressing once you hear it up like that. I don’t know that first hand though.
@@FABAutomotiveDetailing right on. I see This video is from Sept 2018. How is the paint holding up? I bed armored my grill and mirror covers on my hummer h3 and I have alot of plastic I want to restore or renew.
rizkybiss It still looks as good today as it did they day I painted it. Very happy with it!
Did the blotchy spots on the rear disappear after time?
juvi81 The blotchy spots were defects in the plastic.
Forgot to mention the Rustoleum matte black in the 2x label is much cheaper and performs exactly the same. Rustoleum is all about marketing the same product in different categories.
You should have shown the part on how to remove those pieces as well....
can you use this on chrome? ever tried anything else on chrome to get it black?
No it wouldn’t work on chrome to well.
Teak oil great for black trim
Does it smell pretty good?
How has this held up since the first application?
It still looks good! Not as good as it did when I first applied it but I have been extremely happy with it.
Have you done an update vid? If not did this last ? Keep up vids 👍👍
TheBennynyc2 I made one over a year ago. I need to make another one. It still looks like I just applied it. It has held up amazingly. I have added no dressings to it just clean it when I wash the car.
Those short fast strokes probably why it looks blotchy in the after video portion
How does it last against sun, when you leave your car outside
The Jeep has never been kept in the garage and it has held up well. After close to four years it’s just starting to show sign of wear.
Do you think I can use this as just a spot treatment or do I really have to paint the entire thing?
itsSaucyJohn I think it would be hard to blend it without it being real noticeable. You would have to test it in an inconspicuous spot.
Night and day difference! Like #12
johnnypro Thanks! Turned out better then I thought it would.
THUMBS UP FOR THE VIDEO BRO!! CAN THE PAINT BE USED ON BACK WINDOW RUBBER TRIM FOR A 2004 CHEVY S10? ALSO HOW DID IT HOLD UP FOR THE VEHICLE BEAUSE IT'S 2021 NOW?
Thanks! Yea it would work fine on rubber trim also. It has held up great.
ruclips.net/video/vCAbb-xcbDA/видео.html
Here is my 2 year update! 👆
What color is it? I’m only finding matte black on Walmart and Home Depot?
It’s matte black
What I may have done was hear gun the plastic then hit it with some solution finish black plastic and vinyl restorer. Just another way to do it. Hopefully it lasts.
Youbikewithatube I h e heard bad things about the heat gun method after a year. It will return and won’t accept any dressing or heat gun again. This has held up great for 2 years!
Any updates on this, How’s it hold up?
Russ Walker It still looms as good today as it did when I made this video. It has held up great!
What can I use to clean it before painting it
I use rubber cleaners like Adam’s Polishes Tire and Rubber cleaner or even an all purpose cleaner diluted would work.
another treatment i saw recently that can prevent the need to do this is heat gun treatment, but there probably is a point where you still need it repainted.
Raster raster I ha e seen those also but from what I understand once you hear it up it will fade again and won’t except any dressings or turn black again with heat. That’s why I decided to paint.
Hey guys the heat gun only works temporarily i tried it on my 02 ford excursion a year ago i took my time and came out great but the white spots came back with a vengeance so now I have awesome looking paint using the chem guys stuff but my bumper looks like cheap Marble print 😂 so now I’m watching this video as I’m taping up my bumper pads I’m definitely going to do my cal too thanks for the video 😎 round two here we go 👍
Joseph Desilva I have heard this same thing many times from others. This paint should fix you right up. You are welcome
Thank you 👍
Very nice Brian!! I have been looking at that stuff for a while and just always scared of it. Rustoleum ALWAYS runs on me...LOL May def give this a try
Camaro Time Thanks! Trust me I am horrible with spray paint and this stuff was very easy to use. It’s worth trying
Camaro Time I have bad luck with spray paint myself 😂
So I don't have to sand it I'm trying to do the cover that the wipers are on top of
Nope.
I was always told to use a adhesion promoter by my Paint rep I paint and body work for 30 years
buster tim Ok so where do you buy adhesion promoter? I have never heard of it. 30 years? I have always heard paint and body work is very hard on the body.
@@FABAutomotiveDetailing car paint suppler . Yes body and paint work is hard on people I got asthma from painting . I tell everyone to wear paint mask
Autozone !
Adhesion promoter basically softens the plastic so the paint bonds with the plastic better.
What are those yellow things call holding it ?
They are saw horses
Lol same text tone I use on my iPhone. I need to get this stuff for my 06 Dakota
Douglas Ryan It’s good stuff and has held up really well
FAB Automotive Detailing I just got some I’m off today and just left oreillys
Douglas Ryan Awesome just remember thin coats! Let me know How it works for you
Can you go from black to a sliver color?
I guess if you wanted to you could
I would do a high heat clear gloss after.
That would work I just didn’t want it to be glossy.
Do I have to remove my bumper? To do this method? I have a 2001 Nissan Xterra and my Bumper is Faded on the front
You could remove it or mask everything off around it you don’t want painted or overspray on.
Ok thanks so much for the advice
@@tinalashay2498 you are welcome
looks good from my house...
How long has it lasted? Is it still on there?
Anna Colvett So far it still looks like I just applied it. I plan on doing an update video soon.
FAB Automotive Detailing any update? Getting over reapplying trim restore products that only last a few months
What if someone already painted it and it is peeling in spots?
You would need to sand it
How long did you wait to put it back on? How long does it take to fully dry?
It fully dried in about an hour but I didn’t reinstall until the next day.
@@FABAutomotiveDetailing . I painted my front bumper and my rear bumper and a few other plastic pieces on my 2000 Chevy Tahoe. I'm just hoping it last. And I didn't drive it today because yesterday I painted the vent covers and I was afraid of driving it in the rain today
Superior Lawn Care The Jeeps pieces still look like a just did them yesterday and it’s been a year and a half now.
@@FABAutomotiveDetailing wow. That good huh. Ok then. Hey I appreciate your feedback 😊. Thank you buddy 👍
Superior Lawn Care You are welcome!
Any update on how long the product lasted?
David A It has been a year and a half and it still looks like I just sprayed it. I need to make an update video.
Mines been on 3 years still looks good
Great video, how's it holding up?
Rdetailing Thanks! It’s holding up great. I put a 2 year durability video up not long ago.
FAB Automotive Detailing thanks for the response, will check it out. God bless brother
Rdetailing You are welcome!
It’s shinny?? I think my Jeep fenders were flat black
Lee Sires Not Shiney at all once it cures.
How does this compare to krylon fusion
Pablo Valdez I have never used that product.
You didn’t use a adhesion promoter or primer just the finish paint?
Yep that’s what it is for. It’s been a year and a half now and it still looks as good today as the day I painted it. I have applied no dressings or anything to it.
Probably left it in garage for year and half