Unbrick router WiFi TP-Link TL-WDR4310 using CH341A flash programmer
HTML-код
- Опубликовано: 14 май 2018
- Please subscribe for more useful videos about FREE Internet and WiFi Marketing goo.gl/uBXhYY -~-
Welcome to Free Wifi and Internet marketing. There are several videos in my channel guiding how to debrick/unbrick WiFi router using TFTP or serial console
However with this TP-Link WDR4310 the u-boot is damaged so LED pattern is only 1 LED and nothing happen after power up
In this case, both tftp and serial console debrick methods could not help because there is no program in u-boot
The only way we can do is copy whole flash chip to this router
It is easy to de-solder SOP8 flash chip, just add some tin in both sides of the chip
Then heat up both side
Clean up the board
And clean up the chip as well
Now we will clip the chip and connect it to ch341a chip programmer
We can detect the chip and see if it is working
The chip program is damaged so we cannot read any useful information from it.
Now I have loaded the information from another working chip to the buffer
Then we have to erase the chip, make sure it is empty before we write to it
Click program to start writing to the chip
Wait until it finish writing
Finally, solder the new programed chip back to WiFi router board
LED pattern shows that my router is de-bricked and works again
I do some final test with RJ-45 cable connecting to it LAN and WAN ports
Thank you for watching and please subscribe for more useful videos
Please subscribe and find how to do #WiFiMarketing DIY Wi-Fi router long range antenna, RAM, flash and turn on social WiFi marketing with OpenWrt captive portal to boost your business using wireless LAN
High gain 9 dBi dual band wifi antenna VS original TP-LINK routers • High gain 9 dBi dual b...
WiFi antenna hack 5dBi to 16dBi long range outdoor TP-Link router • WiFi antenna hack 5dBi...
Display wirelessly to TV using AnyCast M2 Plus Mini Wi-Fi Display Dongle Receiver • Display wirelessly to ...
Out door long range WiFi router mod Tp-Link TL-WR841N hack lightning protection • Out door long range Wi...
Copy eprom flash chip to chip without computer ezp2010 copy tools • Copy eprom flash chip ...
#WiFiRouter #AntennaWiFi #DIYWiFi #OpenWRT #WirelessLAN 
Хобби
here are several videos in my channel guiding how to debrick/unbrick WiFi router using TFTP or serial console
However with this TP-Link WDR4310 the u-boot is damaged so LED pattern is only 1 LED and nothing happen after power up
In this case, both tftp and serial console debrick methods could not help because there is no program in u-boot
The only way we can do is copy whole flash chip to this router
Ask some friends who have them, they can send to you.
You mean WDR4310 flash dump file?
OK will give you link tmr
Please scan the QR code from facebook.com/FreeWifiMarketing
have you got the file?
Why did you remove the bioss instead of coneccting it to the clipper directaly?
i think if the Flash chip isnt removed from the board, the cable wont be able to make contact with the pin on the flash chip
I did not see you adjusting MAC-Adress in the binary. You may now have two routers using the same MAC causing trouble!
Great Video! i need to make as same as you for my dir 825 g1 but i dont have working device to copy firmware ! could you help me to find thanks
You can use the CH341A programming copy of the Wavlink AC600 device file. I need this re-set file for my device defective. help me.
Must I remove the chip to use ch241a? I do flash GPU bios without removing the chip.
I don't have another router/modem to read program, firmware in Tplink website is about 30MB (for 8MB FLASH !). is there any other way ?
please do you have wdr3500 full dump or link to get it ?thanks
sir download file from tp-link website of my TL-W5210G Router Firmware and burn bin file with the help of ch341 flash programmer but the only router power led glow, and other lights are still OFF kindly help. thanks
can 4310 work with 4300 flash chip?
Hi. After the flash, all lights in my router is blinking.
Hello can you read and coppy the WAVLINK AC600 ROM file. My faulty device needs a Coppy Rom file from the active device. Please help me
please i want flash dump for 4310
لم افهم لماذا لم يبرمج الإبروم مباشرة على الماذر بورد
i need the software
Bahi mujhay 3pin wala chaya app ka pass hi
Hi, there, just a comment to thank you somuch, onthe effort of video-docuementing EEPROM's reload process, hardware to software, I just bought a ch341A on ebay, can't wait to test that. I keep your youtube org channel's URL, to contact you back : I was seraching about EEPORM about a project I'm Working on, and .. Why not collaborate ? Here is my github : github.com/Jean-Baptiste-Lasselle, Thank you so much again!
TL-WDR3500 dun file
You can use the CH341A programming copy of the Wavlink AC600 device file. I need this re-set file for my device defective. help me.
Hello can you read and coppy the WAVLINK AC600 ROM file. My faulty device needs a Coppy Rom file from the active device. Please help me
You can use the CH341A programming copy of the Wavlink AC600 device file. I need this re-set file for my device defective. help me.