Causes and Fixes P0741 Code: Torque Converter Clutch Solenoid Circuit Performance/Stuck Off

Поделиться
HTML-код
  • Опубликовано: 27 фев 2024
  • How to fix P0741 Code: Torque Converter Clutch Solenoid Circuit Performance/Stuck Off
    A P0741 code is set when the computer is trying to apply the Torque Converter Clutch (TCC) and it is not working.
    The Torque Converter Clutch (TCC) locks the engine to the transmission, which reduces slippage and increases efficiency.
    Causes include a bad torque converter, a bad solenoid, a worn TCC valve, and internal transmission failure.
    Possible Causes of a P0741 Code:
    Low Transmission Fluid
    Bad Solenoid (TCC or Shift Solenoid)
    Bad Torque Converter Clutch
    Bad Transmission
    By using this information user assumes all risk of use.
  • ХоббиХобби

Комментарии • 25

  • @finnafishfl
    @finnafishfl 3 месяца назад +5

    Today I changed the oil on my transverse mounted for cylinder engine and accidentally drained the transmission oil I drove about 11 miles before stopping and filling it back up and fixing everything but I still have this code . Any ideas what could be causing it still

  • @sheilainzunza5085
    @sheilainzunza5085 5 дней назад +1

    Thank you

  • @ae364
    @ae364 Месяц назад

    Hi. I have a p0744 code. tcc solenoid intermittent on my 09 Nissan Rogue. Can I simply access the solenoids from the bottom of the transmission after removing the plate? If so I can check that myself. Thanks

  • @rudy2ndjr
    @rudy2ndjr 2 месяца назад

    Hi im having this code on a 2016 crv with 35k miles, a glashing d light i have. Ive replaced speed sensor, oil pressure sensor. Still have thia cose and check engine light. Transmission is shifting fine.i see a litle leak every time i park. I think i overfilled i dont have dipstick.

  • @isolation
    @isolation 2 месяца назад +1

    Very informative, thank you!

  • @destak7263
    @destak7263 3 месяца назад +5

    Problem on 08 Silverado. Thanks for video. Hopefully a solenoid

    • @cesarportillo6385
      @cesarportillo6385 3 месяца назад +1

      Same here 2008 silverado, did it fixed it?

    • @Electronic254-th1cv
      @Electronic254-th1cv 20 дней назад

      Did it work of either one of you 08 here too

    • @cesarportillo6385
      @cesarportillo6385 20 дней назад

      @@Electronic254-th1cv havent tried it bro still got the problem

    • @Electronic254-th1cv
      @Electronic254-th1cv 16 дней назад

      @@cesarportillo6385 am replacing the transmission I’ll let u know how it goes

    • @destak7263
      @destak7263 14 дней назад

      @@Electronic254-th1cv it worked briefly but would burn out fuse again.. Ended up being electrical. Some wires rubbing on metal. After fixing them wires didn’t have the problem again

  • @moreno_163
    @moreno_163 16 дней назад

    I got that code on my ‘19 Toyota Camry at 114,000 miles 😢. My car tends to jerk when I accelerate at times and the rpm goes high when the engine is somewhat cold.

  • @toljcpot
    @toljcpot 3 месяца назад +1

    I have code P0740
    In my outlander 2011
    I don’t have issue with the idling or else .Just not shifting and staying in the 1st gear only.I have Drive,Reverse,neutral,Park
    But if i put in manual shifting plus/minus it is showing in the dashboard it is working but in the the gear it is stay in 1st gear.🤔🤔🤔Anyone encounter my problem?it is CVT type

  • @adetokunboshitu7649
    @adetokunboshitu7649 4 месяца назад +3

    This was quite helpful but I still have 2 error codes on a 2014 Toyota Corolla (P0841 and P2829). Please what could be the cause of these codes. I have also attempted to change the transmission fluid sensor but issue still persists. Kindly advice in this regard. Thank you.

    • @HVAC_Mechanic
      @HVAC_Mechanic  4 месяца назад

      It's difficult to give an exact answer since it needs to be troubleshooted, but I would start by testing the solenoids and make sure they have the correct voltage.

    • @matthewblack1845
      @matthewblack1845 3 месяца назад

      I’m having this same issue on a ‘16 Corolla S

    • @v.gior7
      @v.gior7 15 дней назад

      I'm having the same issue on my 2018 Corolla SE! I changed the transmission fluid and filter and no luck, tonight I'm changing the solenoids. Did you ever find out what went wrong in yours?

    • @adetokunboshitu7649
      @adetokunboshitu7649 15 дней назад

      Try checking the solenoids.... @@v.gior7

  • @aaronlam1378
    @aaronlam1378 4 месяца назад

    im having this problem with my 2004 matrix with the same code but i dont have the tool to see what solenoid is faulty so what should i do?

    • @HVAC_Mechanic
      @HVAC_Mechanic  4 месяца назад

      With a P0741 code It's the Torque Converter Clutch Solenoid that has failed. Sometimes, you can find the location with Google images or in forums; otherwise, you will need a manual.

  • @jamesandjackiearmstrong3534
    @jamesandjackiearmstrong3534 2 месяца назад +4

    My 2017 Pilot has 140,000 miles, the light has come off and on twice in the last 3 months, but the car is running fine. I took it to a transmission shop and the guy wanted to change the transmission for 7 grand. Any suggestions.

    • @jawadaffan745
      @jawadaffan745 Месяц назад +2

      How do you feel when you drive the car does it jerks or hard to shift gears? If not it will be fine and when you have the check engine lightn on take it to autozone or advance auto parts shop for a free check and you will get to know the exact problem

  • @alexespinoza8257
    @alexespinoza8257 3 месяца назад

    I have this code and p2757 what could that be also there’s oil in the coolant and radiator does that mean I have to swap the transmission

    • @josemartines2549
      @josemartines2549 3 месяца назад

      No You have a broken oil líne in the radiator,

  • @robertquevedo1430
    @robertquevedo1430 2 месяца назад

    Ya sucks