2002 - 2007 Audi A4 How to replace the starter
HTML-код
- Опубликовано: 2 авг 2024
- #Google #Yahoo! #Amazon #Bing #Ask.com #DuckDuckGo #Yandex #AOL #Ecosia #Baidu
2002 - 2007 Audi A4 How to replace the starter.
In late 2004, Audi introduced the seventh generation of the A4.
It was announced as a B7, but on its internal documents was named as a 6th generation. It was not a new car, but an extensive facelift.
The Audi A4 B7, as it is mainly known, it kept the same platform from its predecessor. A very good platform that was built for longitudinal engines. From the outside, it looked like a new car. The front grille had the same shape and inspiration theme as the bigger Audi A6. The headlights didn't have a straight line on their lower side. From the side, it was easy to recognize its predecessor. In the rear, the boomerang style taillights gave a different perspective. The overall length of the car was bigger than on its predecessor, but only due to a bigger rear bumper.
Inside, most of the elements were the same as in the 2001 Audi A4. There were some differences such as an aluminum trim sweeping across the dashboard. Since the wheelbase was almost the same, the interior room wasn't improved. It had a better sound system and different materials inside.
The engine lineup was improved extensively and, most important, the direct fuel injection system was widened across the gasoline engines too. A new, 6-speed manual transmission was introduced to replace the older 5-speed.
B6 (2002-2004)
The second-generation Audi A4 arrived on U.S. shores for the 2002 model year, on the new lighter, stiffer, and larger B6 platform. A manual transmission continued as standard on most models, while the previous Tiptronic automatic was replaced with a CVT transmission. Sedan, wagon and two-door convertible (cabriolet, in Audi speak) body styles were available, plus front- or Quattro all-wheel drive. The base engine remained a 1.8-liter turbo-four, but the 2.8-liter V-6 was replaced with a 3.0-liter unit with 220 horsepower. The S4 sport sedan was given a new 4.2-liter V-8 engine making 339 horsepower from 2003 on. 
Авто/Мото
The fact that you did this w/o removing the cat bravo
Thanks for watching!!!
are those bolts same length?
thanks george you saved me 8 hours
Tell me about your experience.
Where you from?
Super thanks
I saved money with your video Axtuo AX THANKS!!!
Very good!!
Thanks for watching!!!!
SUPPORT THE CHANNEL!!!!
This helped a lot. Than you!
Hi
I hope this message finds you well! I’ve been working hard on my channel, and I’m excited about the content I’m creating. If you’re interested, I’d love to discuss a potential collaboration where we can both benefit. Would you be open to contributing a certain amount to support my channel? Your support would mean a lot to me!
Thank you for considering it, and feel free to let me know your thoughts.
Best regards, Axtuo!!!!
Wonderful Job Starter Audi
I'm so glad you liked this video.
Do me a favor and DO NOT GIVE ME MONEY.
I DO THIS SO YOU LEARN HOW TO DO IT AND SAVE MONEY, but if you wanna show your appreciation then,
Right below the video, there's a heart symbol that says "thanks", click on that, and there you can buy a super thanks (appreciation / tip) which directly supports Axtuo Ax channel. (This channel)
Try the v6 or the v8 😢😢
Is it in the same location on a 3.0 v6 2002?
Great video. I would off like you showing us the removal process
Will do
nadie a tocado ese tornillo, si te fijas está lleno de aceite, ese aceite ha ido penetrando la rosca y con las vibraciones se ha ido desenroscando.
I see
Same bolt was loose on mine too, lots of corrosion holding it on though.
Yup yup...thanks for watching 👀 👌 😎
I like the video cause I thought it was me talking 🤣🤣🤣
😂😂😂You are a bad boy 😂 😂 😂
Can you get to the torque converter bolts through the starters hole?
You can try it....
Thanks for watching 👀 🙂 🙏
Dude a thin cable broke off my starter it looks like it was soldered at the ends ,have u any advice of how i can find were that dam wire goes ,it splits off from the thick red and has a clip ,the car wont start the starter is not broke just this wire i cant find were it goes ✌️
Who knew a tiny wire could cause so much trouble? Maybe the car just needs a little pep talk to get going!
@@AxtuoAx mate i put a brand new starter in and all im getting it the starter spinning as soon as i connect the battery thats even before i put the key in ,trust me this starter is brand new. Any ideas why ? It wont engage even with turnin the key and stays on till i pull the battery lead?
would i have to remove the alternator
“Hey everyone! If you enjoy my content and want to help the channel grow, consider supporting me by contributing. Every little bit makes a difference, and it allows me to create more videos for you. Thanks for being part of this community!” 🙌💙
Do you think its the same for a 2.0 20v 2004?
yesn’t
It might depend on the specific model and make, but generally, the principles should be similar.
Ty bro this job was pissing me off.
Starter motor died.. got it half ripped out.. christmas day so waiting till everytjing opens tomorrow.
Looks like your car decided to take a holiday break too!
Ce potface la unelectro motor deaudi b7 206dacasestrica
Maybe it can make your car fly! Just kidding, but it's always fun to imagine the possibilities.
Is it in the same location on the 3.0 because my new starter come in tomorrow
Hi
I hope this message finds you well! I’ve been working hard on my channel, and I’m excited about the content I’m creating. If you’re interested, I’d love to discuss a potential collaboration where we can both benefit. Would you be open to contributing a certain amount to support my channel? Your support would mean a lot to me!
Thank you for considering it, and feel free to let me know your thoughts.
Best regards, Axtuo!!!!
@@AxtuoAx hey i also have another question did you have to take off the front bumper and the splash guard?