Grinderino 3.5" Walksnail HD Nano Kit V3 How To Build / Firmware / Betaflight / FULL Review!
HTML-код
- Опубликовано: 2 окт 2023
- Timestamps:
00:01 - Introduction
01:06 - Frame contents
01:15 - Frame assembly
03:49 - Motors
06:59 - AIO board
10:24 - Wiring up Motors
10:42 - Voltage regulator / BEC overview
11:29 - 3d prints
12:12 - Receiver
13:47 - BEC / Voltage regulator install
14:03 - Wiring up Walksnail
15:55 - Fpv camera mounting
17:16.- FPV antenna mounting
19:07 - Updating firmware Walksnail VTX
22:07 - Updating firmware Walksnail VRX
26:30 - Unlocking max power/all channels Walksnail VRX
27:20 - Binding Walksnail
28:11 - Setting up Race Walksnail Racemode
30:18 - Crossfire binding info and links
30:41 - Betaflight flashing firmware
31:24 - Betaflight settings
45:51 - Sub250 information
46:39 - Props/Battery/HD Cam information
47:42 - Maiden Flight
53:01 - Axii Antenna Upgrade
55:08 - Final thoughts and conclusions
Crossfire how to bind video: • Tbs Tango 2 How to Bin...
Grinderino Build Parts List:
Frame: ummagawd.com/products/botgrin...
AIO Board: www.racedayquads.com/products...
FPV Digital System: caddxfpv.com/products/walksna...
Receiver: flyhighfpv.com/products/cross...
Motors: www.readymaderc.com/products/...
Props: www.getfpv.com/gemfan-hurrica...
Battery: www.racedayquads.com/products...
HD Cam: www.amazon.com/Insta360-Light...
Voltage regulator: www.getfpv.com/diatone-mamba-...
M2 hardware kit: www.racedayquads.com/products...
Copyright Free Music & SFX:
audiio.com/partner?oid=1&affi...
70% Off Audiio Pro Plan Code:
Save70
To help support the channel please consider a donation:
www.buymeacoffee.com/edrone
Join this channel to get access to perks:
/ @edrone_
Drone Addicts Discord Server:
/ discord
My personal email: 📬
emarvel09@gmail.com
My Facebook group please join: 📧
/ 1683911325006581
If you would like to help support my channel: 💰
/ edrone09
Custom high quality edrone Kevlar lipo straps 220mm length: www.paypal.me/edrone09fpv
My Paypal: 💵
emarvel09@gmail.com
Edrone Hats! 🧢
www.ebay.com/itm/265426653369...
Edrone Channel Merchandise: 👕
teespring.com/edrone-channel-...
/ @edrone_
Follow me on Instagram: 📸
edrone09fpv
Check out my Tik Tok: 🎵
@edrone83
👍 Like | 📨 Comment | 📢 Share | ▶️ SUBSCRIBE
✅PLEASE SUBSCRIBE To My @edrone
✅SUBSCRIBE NOW: cutt.ly/T9GtP9l
___________________________________________________________
If you have comments regarding how we can improve our videos, kindly comment down
below.
___________________________________________________________
▶️ Follow me on Social Media: -
✔Instagram:https: edrone09fpv
✔Facebook: / 16839. .
✔Tiktok: @edrone83
----------------------------------------------------------------
✅Other Video Links:👇👇
💢HDZero Goggles HDZero VS Analog Penetration Testing w/@BOTGRINDER
👉 • HDZero Goggles HDZero ...
----------------------------------------------------------------
💢HDZero Goggles My 10 Favorite Features!
👉 • HDZero Goggles My 10 F...
----------------------------------------------------------------
💢Flew My First Crane And Matty Flipped It! GRAVITY 6s FPV Freestyle
👉 • Flew My First Crane An...
----------------------------------------------------------------
💢DJI Mini 3 Pro Must Have Accessories GIVEAWAY and CRASH! 👉 • DJI Mini 3 Pro Must Ha...
Grinderino | Avatar HD nano kit v3 | Walksnail
#walksnail #caddx #fpv
👉Don't forget to SUBSCRIBE to this channel for more updates.
👉Thank you for watching this video and Keep supporting.
🌟Thanks for visiting this channel, Keep supporting 👍 Have a nice day
▂▃▄▅▆▇█▓▒░Thank You░▒▓█▇▆▅▄▃▂ Развлечения
Thanks! Im building a 3.5" from Daddy Loves Quads, and yours has motivated meo to finish!
Awesome man best of luck with your new build and thanks for your support definitely much appreciated!
Friendly fyi, usually your screws are measured from below the head to the end…this could cause some problems if someone just grab and use without measuring. Great stuff as always, enjoy the channel. I got the pro walksnail kit for mine, with that pink Argus aio…hopefully will be all together next week. Great info here.
Thank you for the insight and information! I did not know that about the screw measurement. I do appreciate your feedback 🤟
In presets, they have an option for walksnail vtx so you don't have to go into cli and set up walksnail. It makes it SUPER easy, way less of a headache
WOW that was clear, great vid Mr Edrone
Thank you! I was very impressed as well 🤟
Had to wait too boot up the PC for this epic long one, nice build vid.
Thanks Raz! Appreciate the support my friend 🤟
Great edit, Erik!🤘🏽💯
Hey thanks brother! Appreciate you 🤟
Was worth all the time mate ! Absolutely love your video’s ! …. ❤
Thank you so much! I really appreciate the kind words and support brother 🤟
very helpful video here showing walksnail update process and wiring to the vtx
Awesome and thank you for the feedback! That was definitely the goal.
awesome video! quads flys amazing
Thanks brother 🙏🤟 I was impressed with everything as well!
That thing looks fun
Feels amazing! Definitely a blast and quite capable as well 🤟
Great video
Thank you. I realize it's a long one but I wanted to make sure someone new to the hobby could build and set this up by watching the video.
@@edrone_ heck yeah,I have built a 5 inch or 2 now but never anything smaller and I definitely want to build a Grinderino so the video is very helpful to me.
nice bro
Thanks 🤘
😎
🤙🤙🤙
Where do you get power for the bec? Battery lead, cap and bec all on the same pads seems a bit much.
No issues thus far using the positive and negative pad on the AIO for powering the bec with the capacitor.
Jingle jangle!
Bo jangle! Haha 🤟
Great video & very helpful, I was wondering where you got the insta360 Go 3 mount? I've been searching for one & can't seem to find anyone who sells them & I don't own a 3D printer so I can't print one. Thanks & I look forward to hearing from you. Keep up the great work!
Thanks! I appreciate you watching and your support as well. Here is the mount I used in the video:
www.etsy.com/listing/1519746461/insta360-go-3-stock-gopro-adjustable-tab
it says you can put in up to 13v in can i use 10v in
We’re can I get the insta 360go3 mount?
www.etsy.com/listing/1519746461/insta360-go-3-stock-gopro-adjustable-tab
Is it possible to purchase the 3D prints for the antenna assembly and the action camera mount ?
Check out www.brain3d.com/search?q=grinderino&type=product%2carticle%2cpage
@@edrone_ super awesome!! TY
6:32 so it's like between an uff and a uff-tah?
(as measured in oh-sh!t-pounds)
Yeah you will feel when it's uncomfortable on your fingers 😁