Love your new opening on the video with the stitching sound and love how you added the word graphics and sounds during the video . Very cool editing of this video!! Love watching & learning all the different things you can do. ❤
Great job like always They do sell few tools to pinch foam inside the thread not sure what’s it called top of the head but that what I use to push it in after the heat gun
My favorite is purple and then the mint is a close second place. What font is that you are using? I know you said that you got it from Etsy just didn't hear the name of it.
Hi Angela, Awesome content. Were you able to troubleshoot the hole? We do puff embroidery on our hoodies and it takes us a lot of testing before we get it right. I'm considering adding an option to t-shirts and wanted to hear how it's been working for you. Thank you! Jeremy
I read that you should triple your density when digitizing for the 3D puff on hats to ensure the foam is completely covered. Since that would be wayyyyy too much density for a shirt, do you use the heat gun to shrink the foam in lieu of increasing the density?
I love them all but lean toward the pink on pink. 👚 Since I wasn’t going to wash them, I did puff on sun hats years ago and used craft foam. Big hit and they looked great!
@@desireme03 Hi! Sure, no problem! It’s the Pfaff/Husquarna/Viking software Premier+2. The “full” version. I have to add that the software was a download directly from Germany, as I had ordered and imported the machine directly from Germany (where I got a special deal) and bought everything else with it. I guess there’s no difference between EU and US versions (all languages are available), but never checked. Sometimes certain things are added or taken out for certain markets. Let me know if you need more information! Best wishes
Hi Angela love this video! Loved the font can you please share the name of the font. I looked in Etsy but I didn’t find anything as pretty as your font. Please❤
Hi Angela, wanted to let you know, incase you did not see the information yet, about the Embossed Embroidery take down. I don’t know how to link the video about this but you can watch "All Things Shun” RUclips video posted today, 6/4/24, titled “Embroiders Cannot Make Embossed Designs Anymore!” Didn’t know where else to post this information.
I did a lot of hoodies with Puff back in the early 2000's. Also hats. Haven't done any in years...maybe time to do it again. I see Puff vinyl is popular too. Your shirts look great! Craft foam isn't good to use. It's not formulated to be washed or stitched.
Hi Angela , If I buy the font on Etsy, I can create the words in the basic version of Melco's Design Shop or I need another type of software like Embriliance. Thanks
How do you know where to place the shirt so it’s in the right place for the height of the font? I see you stuck a piece of tape on the shirt but how can you tell the height is right? Thank you
Hi Angela, did you you stabilizer? Did not see the hooping but I am sure you did. That hole at the same spot on both t shirts is strange. Your pull comp seems ok, and you can definitely get away with a 70 needle. I use a #75 only for caps, and they handle it very well. Which foam do you use? The thinner one or the thicker one. I use 2mm on garments and 3mm on caps.
I like your clear instructions on how to do the 3D puffy foam. I like the aqua and pink shirt.
thank you!
Love your new opening on the video with the stitching sound and love how you added the word graphics and sounds during the video . Very cool editing of this video!! Love watching & learning all the different things you can do. ❤
Angela, I finally made a purchase with Melco! Thank you for inspiring me to step out of my comfort zone and rebrand my business 🎉
They all are really cute you did a good job for first time and thanks for the info 😊
Thank you! 😊
Turn out so cute I really like them all
That would be so pretty in different flowers. Great Video.
I like them all but the mint shirt is my favorite!
@Angela Jasmina, could you please link the font you used?
BEAUTIFULLY DONE! 👏🏻👏🏻👏🏻
I doubt she will share but she did say it’s on Etsy. I looked on there but didn’t find that one she’s using
@@latifahstephens9155 I found a 3D puff font on Etsy. If it’s not the exact font, it’s very similar. So, I bought it! 😊
All of the shirts look great! 😊
Yay, thank you!
Great job like always
They do sell few tools to pinch foam inside the thread not sure what’s it called top of the head but that what I use to push it in after the heat gun
I really loved this video; I'm sure everyone's thinking of so many ideas where they could use puff. Thanks for posting!
ANGELA, I Love the Blue with the pink thread, but I like darker colors 😉❣️👍
Puff embroidery looks really good you will sell those easily.
I hope so!
oooh that embroidery looks so pretty!! ❤
It really is!
Hi! These look great! Would you mind sharing which font you purchased on Etsy?
My favorite is purple and then the mint is a close second place. What font is that you are using? I know you said that you got it from Etsy just didn't hear the name of it.
Can you do a video of the 3D puff embossed look where the puff is on back of the shirt. I have a Pe770 can’t wait to try this. Thank you
This is so pretty. Love the colour combinations.
Love your new editing style ❤ I’m curious how many washes a foam can handle 🤔 maybe you can make a video about it
I loved the purple t-shirt with white writing.
Hi Angela,
Awesome content. Were you able to troubleshoot the hole? We do puff embroidery on our hoodies and it takes us a lot of testing before we get it right. I'm considering adding an option to t-shirts and wanted to hear how it's been working for you.
Thank you!
Jeremy
I read that you should triple your density when digitizing for the 3D puff on hats to ensure the foam is completely covered. Since that would be wayyyyy too much density for a shirt, do you use the heat gun to shrink the foam in lieu of increasing the density?
Wow that's really cute
I love the aqua with pink. Thank you! ❤
Oh my God, I love it!
They are so pretty
Oh so cute that’s nice .
Great job any chance we could get a tutorial for digitizing the puff design
So beautiful, What font is the word Overthinker? Thank you
Thanks for the video, really helpful.
Glad it was helpful!
Angela...when I did my Melco training years ago, I mentioned that it would be cool to do puff on a shirt... and now here we are.... 🤭
That is awesome!
I love that!! Could you use this on a single needle machine like a Brother?
yes!
I love them all but lean toward the pink on pink. 👚
Since I wasn’t going to wash them, I did puff on sun hats years ago and used craft foam. Big hit and they looked great!
HI Angela. Can you go over the settings you use with the puff embroidery?
What font did you use. It looks like it's a good one. Thanks!
Great font! And great job, as always!
Your ssaid you used Embrilliance in this video. Do you use the StitchArtist 1-3 and digitize your designs?
I like how it looks!
My embroidery software actually came with several puff embroidery fonts included!
Best wishes ❤
Wonderful!
Hi, which software do you use if you don't mind me asking
@@desireme03 Hi!
Sure, no problem!
It’s the Pfaff/Husquarna/Viking software Premier+2. The “full” version.
I have to add that the software was a download directly from Germany, as I had ordered and imported the machine directly from Germany (where I got a special deal) and bought everything else with it. I guess there’s no difference between EU and US versions (all languages are available), but never checked. Sometimes certain things are added or taken out for certain markets.
Let me know if you need more information!
Best wishes
Hi Angela love this video! Loved the font can you please share the name of the font. I looked in Etsy but I didn’t find anything as pretty as your font. Please❤
I’ve always wanted to do this on clothes but my concern is the wash lol curious to know how that holds.
Washing should hold up just fine. I've done thousands of shirts with it and very wash friendly.
Love them all.
thank you!
For shirts what do you recommend for puff embroidery
Love how they turned out . Well done . I like the mint more 😂 . Can’t wait to give it a try too .
Good video thanks looks good
Thank you!!
Hi Angela, wanted to let you know, incase you did not see the information yet, about the Embossed Embroidery take down. I don’t know how to link the video about this but you can watch "All Things Shun” RUclips video posted today, 6/4/24, titled “Embroiders Cannot Make Embossed Designs Anymore!” Didn’t know where else to post this information.
Hola Angela ❤ like the shirt ur waring, well I like every thing you make ❤❤❤❤
Thank you so much 😀
Do you need to have a special 3-D font to create with puff designs?
I did a lot of hoodies with Puff back in the early 2000's. Also hats. Haven't done any in years...maybe time to do it again. I see Puff vinyl is popular too. Your shirts look great! Craft foam isn't good to use. It's not formulated to be washed or stitched.
Yeah it used to be very popular, and it’s coming back! I love doing it! But fyi, she didn’t use craft foam, she used gunold embroidery foam 😊
@@jenniekinsey9776 I know...I was agreeing with her. :)
do you need to use a stabilizer under the shirt?
If I don't have a heat gun can I use a hair dryer?
Love it
@ Angela Jasmina, please share the font you used.
That was awesome
Hello! Is there any place that you are learning what stabilizer to use on what material?
- if you would be so kind -- would you do a demo of the 3D puff on your 6 and 10 needle brother machines?
Thanks for this tutorial
So cute! Do you think the wash instructions would change to avoid dryer due to the puff shrinking w/heat?
I put hang to dry, I personally dried my own and it was fine but you never know what settings customers may have on their dyers haha
Hi Angela this candi when will you be back in Long Beach in California
Hi Angela , If I buy the font on Etsy, I can create the words in the basic version of Melco's Design Shop or I need another type of software like Embriliance. Thanks
You should be able to use design shop!
Thanks
They turned out great!! Did you use the classic or dense gunold foam?
classic!
Thank you so much!
Great job! Where did you order your puff foam from and what “show” do you attend to see new products for this industry?
puff is from gunold! & the impressions expo & printing united expos!
@@AngelaJasmina Thank you so much!
How do you know where to place the shirt so it’s in the right place for the height of the font? I see you stuck a piece of tape on the shirt but how can you tell the height is right? Thank you
Freaking Awesome!!!
Angela how much does the comfort colors blanks run wholesale?
about $6
@@AngelaJasmina Where do you purchase if you don't mind me asking?
Would you recommend trying this with a brother Innovis? Or should we only try on bigger machines?
It can work on all machines!
Where did you get the puff font?
The heat can you use a hair dryer
Hi. Denmark here :) What is the name of the foam? Please 😉
Great job.
I have some of that. I wasn’t sure how to use it
Hi from NZ Love your vids !❤ Do you use a double layer of stabilizer for tshirts?
Thank you! No I did not
I have a Brother 10 needle. How do I raise the presser foot?
Hi Angela, did you you stabilizer? Did not see the hooping but I am sure you did. That hole at the same spot on both t shirts is strange. Your pull comp seems ok, and you can definitely get away with a 70 needle. I use a #75 only for caps, and they handle it very well. Which foam do you use? The thinner one or the thicker one. I use 2mm on garments and 3mm on caps.
I did use stabilizer! It is 3mm foam & I think I figured out the issue !
@@AngelaJasmina would you mind sharing how you solved the issue?
@@starfish3704 I increased my actifeed on my machine to 30 and it fixed! Also when I rip the puff on the n I rip it left to right
Where is the font from? Did you design it?
Where can I get the 3D puff material?
What font is the one you’re using?
I need to step up my game so I can get a multineedle faster
Where did you get the foam?
Gunold!
Can you do that on a single needle machine?
yes!
Hey lady. What's the name of this 3d font?
Love it
Waddup luv. Very nice
I have a pe 800 I want to try it on that
Where did you buy the heat gun from?
Home Depot! you can try a blow dryer though!
Nice very good ❤
What font did you use?
Hi! Can you please share font used?
Where did you get the foam from
Gunold
Thanks you Help me
I thought I saw where there was a discount code for the Poppy 3D font by Alphalicious but I can't locate it now. Did I dream that up?? lol
its AJBestie
@@AngelaJasmina Thank you so very much for your prompt reply!!! Enjoy your videos!!
Good morning, Angela!
Good morning!
I use tape a lot easier than pinning
Heat gun- what kind how do u use it
Mine is from Home Depot! Just turn it on and move it around don’t leave it on one spot too long!
🔥🔥🔥🔥🔥🔥🔥🔥🔥
ANGELA, do you live in Miami ? I live in North Miami 😊❤
No I don’t! I live in Florida, I used to live in Florida in high school !
❤❤❤
I’ve been seeing this
Hola, Angela
My machine continues to have thread breaks need help
Me too. Single needle
Good morning
Morning!
Good afternoon from south Africa