Best Jeep Engine Swaps!
HTML-код
- Опубликовано: 29 сен 2024
- Check out our fast delivery items at - bit.ly/2YEd1oL
Looking to swap out an engine in your Jeep or just curious about what others are putting in their build? Today we today about the top 5 engine swaps and why people are choosing these in particular! As always, let us know if you have any questions in the comments below.
The best jeep swap is any engine that's not a jeep engine
OUCH
@@TrailBuilt ok maybe the straight 6 4 liter
.... You hit the nail on the head and believe me newer Jeeps are lower grade than older jeeps and they're all Chrysler garbage....
@@ronaldradicalhickman6071 precisely, you are right plus I worked for chrysler for awhile
@@chrislewis5069 ...believe me I've worked on so many mopars every iteration out there and I have complained directly to them as I as an automotive engineer and ask them why they would use a shity grade of metal for certain components and they still continue to do it.....I have pointed out their major problem which is minor in the manufacturing process.... their whole valve train issue is the biggest Mopar downfall
1.9L TDI Diesel
Which one will work in my 2008 Jeep Wrangler X
Most of these are unrealistic for CA. 😮.. We here have to find a donor vehicle with proof of registration. And keep all smog equipment as stock.. Must be kept up to donor vehicle smog standards. Still not impossible.
Ask me how i know..
- 1980 wagoneer owner.
VW TDI 1.9L in a Willys CJ6
what about the fricken trackhawk and those things
I would say a Jeep. Swapped a 360 amc ,727 automatic into my cj7 20 yrs. ago. Quadrajet carb, wagoneer 44 in the front, narrowed dana 60 from a 73 Jeep pickup in the rear. 94 yj tub, full roll cage,spring over. Never had engine issues. Plug and play. Turning 36" Super swamper 410 gears.
I'm probably the only one to say this but I've been considering swapping my 98 2.5L for a ford 300 6cyl and bulldog trans. And couldn't tell you why exactly lol
you forgot jeep 4.0-4.6/4.7 stroker engine.... 300hp/300ftlbtq.... no mods to vehicle... bolt in. when the power goes over 300 you need upgrade the rest of driveline. It will get way more expensive when you have to upgrade the axles.
The Windsor small blocks are a very easy swap in the CJ jeeps. Much easier than any V8 s besides the AMC V8s . The T176 4 speed trans used in the CJs as well as the Jeep T18 trans will both accept the SBF bell housing and the input shafts and clutches are compatible with the SBF engines. A simple trimming of the input shaft tip and a readily available pilot bushing along with mounts and the Required SBF stuff and it's in and off to the sticks. I swapped a roller cam 351w and t176 / d300 t case into my 74 CJ 5 in a weekend. Infact I started Sat morning and was on the road running excellent by 1 pm Sunday with no midnight oil burning Sat night. Super easy swap when research completed and Everything ready to go as planned. Couldn't be happier
Do you have a build log available?
My 74 CJ5 came with a 304 AMC factory, but the down was the 3 spd tranny, Drove it as is for several years, had to tag a 5 Gal jerrycan all the time
Is it true if you have a 2.5 in your YJ the Ford small block matches right up with motor mounts
Last jeep with a v8 was in the 80s.
Um ok what about the grand cherokee? That has had a 5.2 5.9 4.7 5.7 6.1 6.2 and 6.4
.... And every damn one of them except for the inline 6 -4.0L was a problem and engineering and design nightmare.....
He's talking about actual jeeps
What about the zj or wj. both were solid axle unibody jeeps
He's talking "actual" Jeep (Wrangler: CJ, YJ, TJ) not unibody, IFS, "soccer mom" stuff.
@@ronaldradicalhickman6071 5.2 was one of the most reliable engines ever put in a Jeep next to the 4.2.
Am I the only one who thinks the new Bronco looks more like a 70's Scout than a first generation Bronco?
It looks like a Kia Soul fucked a jeep renegade.
Oh boy, this is just the start of the things keep fan boys are going to be saying about the new bronco that already has over 190k pre-orders, me being one of them
@@Andrew-on5do your envy is showing.
I'm considering a bored and stroked 258ci I6 from either Golen Engines, or Newcomer Racing. They are making the same HP and torque numbers as the stock 5.3 (approximately).
Those to companies are highway robbery especially Golen you should try Titanengines.com there 4.7 stroker wit a a Edelbrook head is $4100
i am 100 % behind that move only leaning more towards newcomers motor builds!
Expensive though
4.3 Litre GMC V-6 ( WAS) suggested by Advance Adapters back in '93-'95! EXTREMELY ECONOMICAL!!
You could buy a new JL and do the V8 swap on it for way less the the $70k that new V8JL will cost.
Put a LA block 360 in my old CJ, and in my YJ.. Love the bottom end performance. And it dosent look like all other V8 swaps
Jeeps need torque not horsepower
I got a 318 V8 in my 2000 TJ, easy to work on and very strong running
Tried to find one but couldn't so I went with complete 90 1/2 ton with 302,5 spd., & T Case for the swap..
My 4banger still doing what it needs
You forgot about the hellcat engine lol I'm not going with a V8 or LS swap for my jeep. I saw that exdos 4x4 put a stroker engine in a jeep wangler LJ a 4.6 straight 6 much cheaper than a V8. I'm so ready to get rid of my 4 cylinder in my YJ jeep.
I was contemplating throwing in the 4.6L stroker but decided to save it for another engine swap video for the non-V8 engines! 💪🏼😎🤘🏼
I would love to see that. I would consider a V8 if it wasn't so expensive and didn't drink gas like crazy lol.
sticking with 350 4 bolt,im getting there slowly but surely ..everything else just dosent seem reasonable to me.,dont get me wrong if I had money to waste id diffently wow poeple but,its not about that its about me and my family,and so far its been alot of fun restoring my jeep.I had a guy today ask me why dont you just buy one already done,I said cause I want to build it and make it work,I like the idea of doing all the body work and welding ,and building it myself,cant explain it but its more satisfying.
I'm surprised you didn't include the original... the AMC 360... is it because it doesn't fit? I don't know since I only have experience with CJ7s but I have a wrangler in need of a new engine. Thanks
My xj is getting a 2jz swap if she ever gives me issues.
Great Video... Only missing what happens when you add this power... things begin to break.. Driveshafts... Axle shafts... Gears...
Ford 5.0 fits with factory headers inside the frame rails on my 85 CJ7.
Yeah, well , trah lah lah.
I built my first 350, then a 427 , 454, etc......etc,
That was way back when you could.
Now it 's so lame out there with all the smog nazi's waiting to pounce- you can't build like how it was before !
Has anyone tried to swap a Magnum 5.2/5.9 swap?
Right now working on putting a 302 in my 97 tj, advanced adaptors and Lane automotive in Watervilliet have everything I need, looking at spending 1500 total on the kits
I’ve been thinking of the 5.0 in my 2001 TJ also when needed
I am going to do a stroker on my 4.0 XJ, but it only has 120k miles so it's barely broken in. I just want reliable low end torque and I already know how to work on that engine.
Ha 120k “barely broken in” than my 11 wrangler 3.8 has 160k that must be “ just broken in “ ha mean lil sob , all it does is burn a lil oil not enough for me to care about. Just a lil lift and 35 but I can’t wait till the EHG goes
I was getting skeptical waiting on you to talk about the 350 lol I have one sitting in my garage waiting to either go into my cj8 when I build it or my TJ if I swap it
I got a 350 in my Xj Foken rips buddy.
Have a 90 Ford 1/2 ton with a EFI 302. Engine, 5 spd., & t case for a simple desert runner. Will be doing everything myself.
I'm thinkin' Ols School 327 chevy with no computer crap. All carb
I would either swap a 6.7 Cummins or a 5.0 Cummins v8 or a 6.4 supercharged and twin turbo hemi V8
I’m sticking with my 4 liter for now
Don’t it’ll take a shit on you before it gives you any clue it’s going out
@@eazytoribio2695 a 4 liter is outlasting most of the engines on this list 🤷♂️ one of the best motors ever built
My engine swap of choice is the 7.3L Ford 6 bolt main with a blower... 800+ HP for $8K
Wow!
The GM CRAP is what goes wrong with jeeps why put more of it on your rig 🙃🙃
I have a 2011 JKU with a Procharger from a 2020 Gladiator setup on my 3.8 V6. Yeah, I went from 155hp on the dyno to 370hp on the dyno. Had to get a 400hp 6-puck clutch because the stock one couldn't handle the low-end torque at stop lights. Lasted a little less than a year before I installed the 400hp clutch. Had to go from 24lb fuel injectors to 36lb, dropping the pulley to a 2.8" pulley from the 3.4" Procharger pulley. I did it all myself in my garage on my channel. I think I mentioned the price on it, but I got the Procharger kit for the 3.6 Gladiator off ebay for $3k from a guy who had 4k miles on it. He had to take it off before trading it in. I had to build the setup to fit my 3.8 (whole video walks thru the welding I had to do...yes. I weld.)
All in all, I wouldn't do it over again! LOL! It was a nightmare, but it was a FUN build to hear people say, "...that's not gonna work", and here I am almost 2yrs later still running it! I installed at around 190k miles on the engine, and I'm now I'm at 256k miles on the SAME ENGINE - and it runs like a champ! Had to install long-tube headers, too...almost forgot that. BUT, as long as you have someone who can tune it right, you're in good hands. Without a tune, you're not going anywhere.
And the guy that tuned my Jeep wouldn't go over 400hp because he said my 3.8 would blow without forged pistons. He stopped at a 370hp map, even tho I would never use the full 370hp. I just needed low-end torque for off-roading and making it up hills out in the desert. On the dyno, we got the Jeep (on 37s) up to 123mph. I'll never go that fast on the highway, but it get up to speed a LOT faster with the Procharger on there, sometimes skirting the tires from a stop when I'm not even trying to.
An engine mod may be expensive (and a pain), but it will be the FUNNEST mod you'll ever do! Engine swapping isn't something I'd one in a Jeep, but I'm sure it's a lot easier than building a Procharger setup that doesn't go to the engine you bought it for! LOL! I'll NEVER DO IT AGAIN, but I love my Jeep!
Her a bit late but what about 2002 grand Cherokee swap ? Lol
Amc 360 in my cj since it bolts right up, n owelding, or adapters needed, similar block to the 304 the oem v8s that were discontinued in the cj in 1981
How much HP and torque will the stock transmission take?
Gen IV small block here 431c.I. The old 3.8 was harder to remove than the LS was to install.
Starts at 2:45.
I Ben searching someone swapping 383 stroker 06 jeep commander. Carburetor. I got all my parts as motor 400 transmission. Please help me find someone Don This
My Jeep Commander be better drop 4.3 liter engine. Fuel injection better gas mileage better fuel economy problem finding tech shop do it for me anyone reading this help me out
I just bought a 1972 Jeep Commando with a 304 V8 that will be getting a few mod along the way!
If I get a wrangler, I'll probably go 350 small block. I don't want to deal with shit ton of electronics and tuning an LS ecu.
Fair enough 😂
I put a LT1 with a 8speed been working like a champ spins the 40s all day
Willing to sell ?
I have put so much into it dynatrac ultra 60s axels got the 74 inch. Wide ones put a 5 1/2 metal clock mid arm lift rides like a Cherokee did a atlas 2 transfer case on it can take like 900 hp got the built up 1. Fab 4 fenders hood scoop rhino rims very military looking. For what I have into it it would be stupid to sell it lol. Plan on putting a whipple super charger on it will be pushing around 700 hp
When the 317k mile 5.7 goes out, I want to jam a 6.4 into my commander
Edelbrock made a double pump carburetor? Really?
Any suggestions for a 2006 tj with 6 speed manual transmission?
Super cheap,super easy
I want a manual transmission too
I was looking at a 89 gmc truck 4x4 with 5 speed manual that’s local. For 1500.00
Can’t say I have ever strayed into conversions , always stock but this Jeep power train sucks like my ex.
That local GMC might not be a bad idea whats the condition of the overall vehicle? I always feel like that is a decent indicator of what under the hood is about to look like 😂
@@TrailBuilt
Everything is rusted out mid Canada
Usually motors outlast bodies
What swap can I replace my knocking 4.7 HO WJ Jeep 4x4 with???
Would a 79 Chevy 250 go in or a 350? What would bolt up with the least amount of grief??? Thanks
Currently putting a 304 amc into my 86 cherokee mated to an ax15 and a 242 transfer case.
You say LT and you get the unfollow. Saw that on video earlier and their arguments to why. I'm a born chevy guy. The LT was shit! Ls is and always will be the king.
I'd dump the 502 in my ZJ, 1997 Grand Cherokee, because it has the HP and torque I want and need with all the extra weight I have added to it for overlanding. The little 318 Magnum engine is great if was just a mild lift and 31 inch tires.
I would go for the chevy 350 any day, carbureted, into my 2015 jk. I can rebuild that one in my sleep and since everything else on it is manual, it would be an awesome emp-proof BOV, especially since it wouldn't be that hard to convert it to use alcohol in case I ran out of gas!
My thoughts exactly. We should probably have a beer and talk lol.
Part 2? Diesels in the jeep?
Have to go old school with an Indy block AMC 401. Expensive but is a nostalgic return.
I'm running the R2.8 Cummins, no real interest in any gas V8 for my needs and the eco diesel has a lot of drawbacks with the EPA parts. I'm really hoping Cummins will release the R3.8. Torque is the key for off-road. HP is for Corvettes and Mustangs, lots of fun, just not really the right fit for off-road or doing work or Wranglers IMO.
I love the V8 in my ZJ compared to the lack of torque in my TJ 4.0. If Jeep would have been able to do something like a 4.9 inline 6, I would have been hard pressed for any complaints. Inline 6 engines are just so incredibly reliable. All the 4.0 strokers I found required premium fuel which just doesn't appeal to me. Also any gas engine swaps are just more complicated than diesel and I've seen too many gas fires that I just don't see the point for off-road at least for my skill level in engine swaps.
Yeah, it was a huge huge bummer he left out diesels altogether in this video. I considered the R2.8 but a VW 2.0 TDI fit my budget better. They make adapter kits that make mounting the 1.9/2.0 on the AX15 super easy. I'm doing the fuel tank mod to get 19 gallons so hope to get 600+ miles range per tank when I'm done.
@@amorag59 I think a TDI swap could be one of the better bang for buck diesel swaps. Of course it depends on your needs. I prefer as much displacement as possible for almost any engine.
I'd swapp a 2jz, just to piss people off.
Which is the smallest v 8 available these days?
i'm looking for simple not crazy power. Need a small V8 with mating 4x4 manual trans. But do not know which make would comfortable fit.
wouldn't mind putting a 392 in my YJ
5.0 Coyotes are starting to become popular
I swap a mopar a4 midget engine in my cj3b. 375+ horsepower and only 2330lbs nv 4500 awd. It keeps up with a hellcat.
Hell its the Ram Jet 502 Why? go big or go home, its balls to the wall why not I'm going to died one day, its a bucket list thing.
I have an XJ limited I'm restoring so I'll be sticking to the original 4.0 engine. But if I was going to swap it I'd go a new 5.7 Hemi. New because if your going to spend all that time... and have owned an SRT. The 6.4L has way too many horses for an XJ. Also keep the engine in the family I reckon
I like reliability of an inline 6 4.0
I will be trying to talk my son-in-law into the small block Chevy 327. His 99 has a 4-cyl
And sounds like one of them jeeps off Mash so without being rich for new axles, I think milder will be better. He will get reliability cheapness in a cool sound without spending too darn much.
I'm doing a 5.0 Explorer engine swap in my 98 TJ after I hit 300,000 on my 4.0. About 40,000 miles to go.
You forgot one of the more popular options for the past 10-12 years in TJs, YJs, and XJs... the Magnum engines. For somebody who knows how to do a V8 swap, the Magnum is the easiest and cheapest (in most cases) option for all 3 of those vehicles.
I just got my hands on one, it is a ball. My be the oerfect v8 for a tj , torquey, reliable, parts are easy to get.
There are powerfull rebuilt 4.2-4.0 inline 6 Cyl engines, check out Power Nation, plenty Jeeps were made with 318 and 360 Chrysler engines, I had a 74 CJ5 with a 304 AMC
I have a 2010 jeep jk with a fuel injected 454 bbc in it
Great video, Intellitronix makes a direct fit LED gauge cluster for the CJ, 92-95 YJ & TJ
I want to know if an old school 318 or 360 have the same bell housing pattern as the junk 3.7L. I have a 5 speed and a good 78 360
I just bought a YJ with a hand grenaded 2.5 and a rusted out 99 S-10 with a 4.3. You can do the math.
Hey jeep fans can I swap Honda J-series into Jeep wangler I want vtec and that engine is a tank to work on.
For fun, I’d throw a hellcat in my wrangler but it’s obviously a pipe dream. Realistically, I’d like to give it a 5.7 hemi one day
I yanked my boat anchor 3.8 out of my 2008 for a L83 5.3/6l80 and rewiring the entire jeep to eliminate all the dodge canbus nonsense.
Asking for real...when did Edlebrock ever make a double-pumper? Holley did...for years...don't remember a Carter afb style carb with 2 accelerator pumps.
I'd like some more info, not smart a_s comments, I have a 2000 TJ and a GM 4.3l I'd like to swap the engine into the Jeep? THANKS
My 2012 JKUR on 43” stickies is getting a 5.3L LS shortly.
TBI out of a 95 Chevy 5.7 in a 84 CJ7....but idk where to get a adapter...
I own a 01 tj.to be honest the 4.0 is plenty... But for me being also a toyota guy.the 1uz would be a perfect upgrade.if i was ever going to the v8 road
I like my Grand Cherokee Limited 1998 V8 5.2 l 318 300hp transfer case change two-wheel drive wow 242j
I will put a 350 sbc but I want to upgrade to a ls 5.3 in one moment or better an om606 Mercedes Benz diesel but I think I could have size problems to make fit it engine in a fj40 Toyota
I have a 1987 Wrangler yj that had a small block chevy installed with tuned port efi, headers, mild cam, and automatic trans. It won't start after setting it up for some time and I have it narrowed down to electric fuel pump or the computer. I am going to drop the tank to change the pump but if that doesn't work where can I go for help with computer. I am not a mechanic but economics make me try.
How come no one putting in any Toyota V8s or drivetrain. The 4.7 or the 5.7. They are by far the most reliable engines out there. Not the greatest hp n torque etc. Love to hear ppls thoughts thank you.
too big and not enough aftermarket support for them like an LS architecture engine =) also way too expensive, lack of adapters/versatility etc etc
Is it possible to swap out the 2.4 in the 2016 Cherokee to the 3.2 v6 (both same year and use same transmission)
I'm putting a tree fiddy in my yj. I know it's been done hundreds of times but I got it for free so that's what I'm going with
Probably looking for the GME 2.0 turbo for my 58 fc-170 if the block the super hurricane is dead.
open to suggestion :D
Jus got a 2015 summit nd I’m already wanting a v8 swap
I swapped a L83 and a 8L90 into my four door jk
Torque is awesome. But torque is only awesome if you have the drivetrain to back it up.
My uncle has a yj that he bought off the showroom floor and then later swapped a 4 cylinder Cummins in sick Jeep to be honest
Fast Jeeps are stupid
Jeep 2004 Build
2007 6.0 suburban/ Escalade with 4l60E Novak built.
Novak engine mounts and transfer case mounts
Yukon Joints all axles
Reed front Knuckles converted to Chevy outers
Wilwood front and rear disks and rotors from Wide Open Design. Break squeak has been an ongoing issue
Rear steer axle from Wide Open Design Dana 60 14 bolt with crane kingpin knuckles 5:13 gears
Front end is a 78-79 snow fighter ford dana 60 with a spool
All rear steer components are from StazWorks
All hydraulic steering is from PSC
10:38 to 1 atlas transfer case
Headers Novak
Most of the suspension joints are Jonny joint style joints
Corvette style LS fuel filter from Novak
Stock Jeep fuel pump
All steering joints are from PSC
Is this your jeep setup ?
I break enough parts with my 3.6L Pentastar junk and I am on tons LOL
What are your guys opinion. I have a 98 tj. Going fast would be cool but also want something I can customize through out.
I would live to put a tdi in NY jeep. But california sucks and says no way. Sadly
What about a Ford Coyote Truck engine. 400Hp 400lb tq stock ?
Got a buddy with a 302 swapped YJ. Thing is pretty nasty.
360 mag