We spent the day at Cummins Inc with some of its customers who have done Engine swaps into Wranglers and comparing the different ways to achieve cumminsrepower.
While working at a Caterpillar shop in Key West, FL in 1979, a gentleman came to our shop with a 1957 Cadillac that had a 3208 Caterpillar engine with a Allison trans replacing the blown engine in 1967! He said it was not starting like it used to and loss of power! I found two injectors not firing but replaced them all with rebuilt injectors and had to do a valve lash adjustment as most were way out of adjustment! He drove from Marathon to Homestead five days a week 85 miles to his restaurant! The Caddy had 565,000 miles on it!
We guys here in europe have it made when it comes to diesel engine in the jk. I have the 2007 jku sport with the 2.8 CRD that puts out 177 ponnies and a ton of torque (the number not on the top of my head). I added the pedalbox and it eliminates the turbo lag which feels like I have 200 hsp. But it doesn't stop there, I have a specialist that can reprogram the ECU and increase the turbo boost up to 1.4 bars which he said will draw me close to 245 hsp.
You and me both. Might be in the cards in a few years as I've just framed out and boxed out my entire unibody it's now so SOLID and I have a 8.5" long arm lift to fit it right. I would be a perfect swap candidate for one since the stock unibodys eventually snap spot welds once you wheel for a few years of tough serious offroading. I've heard whispers of 30 mpg paired in with some sort of automatics which would be great for me as I've no interest in manual transmission especially for a 50/50 daily and every weekend wheeler but would not believe it till I clocked those mpg myself. Gearing is key to all of it I'd suspect.
I'm just east in columbus Ohio, I've got a 1995 YJ with a VW 2006 BEW 1.9 TDI I'd wager to say it's even better than that 2.8, 180hp 280tq, and 30mpg all day, with 33s not to mention parts availability
I always thought of getting a Scrambler with a regular Wrangler interior layout, hard and/or soft tops but having a custom (form fitting, lid angled) storage box (trunk) behind the top and 1 to 2 inches below the rear window. I like the idea of the Cummings for better economy (biofuel?).
Did these guys do any frame strengthening before they installed a diesel engine in a Jeep. Like sleeveing the frames. Dodge used to have them twist the frames because of the engine torque in their Gen 1 vehicles and they stopped putting them in 1/2 ton pickups only 3/4 and 1 tons. I do like the engine swap tho.
I would LOVE to do this....but oh man, the COST!!! Even with my cummins employee discount the R2.8 would be as much as buying the used jeep to put it in...not to mention the man hours and tooling.
I gotta give credit to all the work put in. Go for it if you have a passion for diesel. If you just looking for torque, just stroke a 4.0 to 4.8 and do some work the cylinder head. Same torque as a R2.8 but roughly 100 more horse power. I live where it gets cold enough for diesel to gel on a nightly basis for weeks. It's just too much work to make diesel fuel systems reliable in sub zero temps.
There's actually a good amount of videos on YT of Cummins powered Dakota's, It's actually a pretty popular/common swap. I live in small town FL within a county of
It would’ve been helpful having more consistent information/ questions between each motor, hp, torque, fuel economy, cost, what each Jeep is used for...it’s hard to compare without comparable information
Cummins R2.8 just came out & is looking pretty sweet... 'aside from the Cummins price tag. That and it's currently limited to OBD/emissions compliance for 1999 and older vehicles }:(
Would have been nice to maybe hear them run at the end you know, each by themselves. Otherwise very informative. I had so hoped to see a KJ Liberty in there with the swap of one of the motors but no luck there I guess. Anyway, nice video. Thanks.
Hopefully it's better than the e-rod, as far as getting your BAR sticker goes. Long story short, the e-rod is a waste of money and requires about the same amount of hoops to be jumped through to get approved. It's not like a cold air intake. You don't get to just slap an EO sticker on and show up at your local SMOG shop.
That 2.8 is a fantastic idea, and I am glad it is out there, but I just can't help but be disappointed. It is too expensive and too under powered for its size. 2.8l is about half the size of the 1 ton truck engines, but it is only putting out 1/4 the power and torque. Meanwhile, european diesels are 2.0l or less, but put out 25% more power and torque than the 2.8l cummins. This 2.8l by all rights should be putting out at least 225hp and 350lb/ft, and should be doing it for $6k. For the $9k price tag they are asking, it should be *AT LEAST* 275hp and 400lb/ft.
cummins historically under powers their engines to ensure they can get massive mileage before needing rebuild, it doesn't take much to pump their power, there are already people with ~200hp and 400ft/lbs of torque on their 2.8's so the numbers are there they just have to be tuned in.
@rNorock - I see your point, the price is high and (for better or worse) that's about what one would expect from Cummins. Cost aside, the R2.8 looks pretty sweet given the fact it ships 95% complete, is OBD compliant up to 1999 (and eventually beyond 1999), it's also fairly light/not a boat anchor and has a fairly small foot print, which makes for a very versatile/compelling diesel swap option... plus folks are finding they can tune em 90hp over the stock 161hp with no internal engine mods. The price btw has actually dropped a bit year to date and could drop a bit further given a little more time.
@@eliminster06 oh? So I have to spend $9k for the engine, then another several thousand to make it run like it should from the factory to begin with? No thanks.
In Australia we are a bit spiolt with 1HZ and TD42 mills in our favourate cars. My 91' GQ TB42 is a fuel pig and the R2.8 ... some of the chev swaps I've seen are to much. My dayly drive is a 65KW HJ45 landcruiser and I know my 4BT in my 6.3m boat is and are the best. I would love the range available with the R2.8 aaand the china girl I've talked to about it make it attactive. In Townsville we have a reliable flow of commmon rail diesels from the wreckers. Is the R2.8 worth in? BTW I've seen this vid before.
Hello, I'm in california. I have a '99 XJ i would love to convert to a cummins 4bt. Any more info regarding the legality of it? It was mentioned that it was legal, so thats what sparked my interest.
OBD issues aren't likely the only problem, I'm guessing it's also an emissions game thing as well. Which (if true) it figures... given they refined nearly all the sulfur out of diesel fuel and seemed to think that wasn't enough and went on to mandate Def fluid. One good/great thing at least, if anyone can figure out a solution around these issues, Cummins certainly will try their hearts out! Unfortunately however, I don't see the R2.8 being legally swappable/getting cleared for 50 state compliance in vehicles beyond 2012...if it even makes it that far(!) One can hope, but not holding my breath when it comes to EPA red tape.
i have a 99 ranger in great shape.. wondering if the 2.8 isf will adapt to the computers and electrical system.. i want a ranger that can tow, crawl and maybe even tear it up at silver lake with a few propane shots..
Bob Sagget thought about it. Alot. But the issue i have would be the weight. And the r2.8 has more power than the 4bt and weighs less, revs higher, and has more modification within programming before components need to be upgraded.
I have no idea if it would work but that would be the greatest thing to see. A Cummins powered Samurai would be hate proof on the trails, everyone would love it.
I know there's a TON of people out there that have a 4 cylinder engine in their 1997-1999 Jeep Wranglers that want more power. In all the forums, all they are told to do is sell their jeep and buy a new one with a bigger engine, the swap isn't worth it. Will Cummins make these engines doable for people like me with the four cylinder without having to weld on new brackets? I'm fine with swapping out the engine, transmission, and tcase, but I'd do away with the welding if i could.
Bobby Dean welding is easy. Welders for the hobbyist are cheap. Use a flux core welder and you don't even need gas. Not the prettiest welds, but plenty strong enough
@@nealbacon7798 cool platform- 66 Fairlane,,, there's ALL KINDS of folks who would eat that up, to see it on RUclips,,,, just sayin',,,, And I presume you mean the mil light is on the Murphy guage? (As the only 'trouble' light a 66 Fairlane had was a low oil pressure light.... And I am not aware of a 3.3 being outfitted with electronics, to even HAVE a Murphy guage.... are you sure you don't mean a 3.8? (Or a 2.8?)
@Neal Bacon ok, so did you do the repower? Or does the party who did it have access to Insite, to check the fault codes with? The description SOUNDS like a protective de-rate is taking place,, and with the electronics on the QSB series, it can be something as simple as the ECM losing the signal from the coolant sensor, or any number of other ECM inputs that are considered 'critical' to operation. The 'dead pedal' you describe, makes me think it's a critical signal, the ECM is seeing a problem with because thats our protective way, to be sure the operator HAS to pay attention to the engine systems, is if it won't perform,,, they will (hopefully), have to scratch their head and look it over, instead of just beating it into the ground. So, all the simple stuff applies,,, oil pressure (and level, of course), the cam and crank signals and wiring between them and the ECM, the coolant sensor and wiring, the IMTP sensor (Intake Manifold Temperature and Pressure), Turbine speed off the turbo, (if so equipped), WIF sensor (Water in Fuel), and so on. Basically, if you have had 30k of operational bliss,, what changes? Fluid levels, and Filter health, and environmental factors like rodents in the shed you park in, and a myriad of other things you start from by observing K.I.S.S.,, Keep It Simple, Stupid. Eyeball inspection of all connectors and wiring, then, a scan for fault codes, and it will become very clear in short order.
@Neal Bacon I always have to smh at what some places charge, just to hook up and identify the FC's, but I understand what a business plan is, and has to be, to be in business.
The funny thing about jeeps, if you take them off road and do some serious off roading you have to replace literally everything to a heavy duty component because all the drive line and suspension is very weak.
That’s why I regret getting one you gotta dump money on it just to keep it from looking like a lego car and for it to drive decently on the road. Only worth it if you offroad every week
The third one that the guy took out of a stepvan, is mechanical. The pump is known as a 'VE' type. Its rotary, and the style of the first gen Dodge Cummins powered trucks.
Really .. Cummins should have brought back the 5BT stroker motors that went into step vans of the 1960's and 1970's .. I have a friend with a jeep with no squeeze and it has so much torque that it can go anywhere .. It was about 110 bhp but it did not spin up past 2100 rpm's .. That engine got 60 mph in a 1998 Wrangler .. It doesn't go real fast but who cares with that mileage and that much torque .. WHO NEEDS BRAKES with that engine !!!!!!! Just let of the gas and that sucker slow right down .. CUMMINS BRING BACK THE 5BT " P L E A S E " .. That motor in my friends jeep has gone over a million miles !!!!!!!!! .... Low rpm's = less friction = long life = best in class fuel economy = best choice for those who want to trave 900 miles on a single tank ! ..
I am looking for someone to do an engine swap for me on my Low Low 62k actual mile 1987 S-10 blazer 2.8L anemic V6 4X4 Tahoe. The Blazer is MINT. It looks like it was never sat in. Under the hood it looks like it is still on the showroom floor. The original 2 tone blue paint still looks mint. This was an estate sale vehicle vehicle, I am the second owner. It has been garage kept and senior citizen owned since new (and it still is garage kept and senior owned). The 2,8 V6 is worse than a slug and I do not want to slam a V8 in it. My hopes are for a Cummins 4BT or other Cummins(I hear they have incredible 30+MPG, or I am also interested in the new 4 cyl turbo 300+HP Silverado engine (If I can actually find someone that can get it to work with all the computer crap). I am in Tennessee. If you are up to the challenge or know someone that is, please let me know.
He’s jeffery_the_jeep on instagram. He’s also part owner of Axis Industries. If you look at how he wheels you’ll see why it only gets 10mpg. Lol. Also he has a build thread on Jeepforum. Jeffery 2.0
damn...too bad Cummins havent switched to the new CGI foundry methods yet....i would consider owning Cummins if it was made with CGI tech....just sayin'!!
It is not by coincidence that the Jeep practically nothing sells in Europe. Especially the Wrangler !!! And the guys from FIAT have good diesel engines with IVECO(3.0lTurbo or bi turbo) ! They sell them in the US with Chrysler. Is the only problem with the wrangler, gearbox with 6 speeds (and manual), automatic (5 speeds) transfer box 5 STARS, the engine is that sucks, but, great indeed! In my, I moved to a toyota 3.0 diesel, and i smile every day! An ex GM company (Opel) also sold that engine, a catastrophe!
You can now order the JL with a 3.0 liter Ecodiesel from jeep with higher HP and TQ numbers. So why would someone want to sink thousands into swapping in a Cummins diesel. You will void out your powertrain and drivetrain warranty also.
more AMC Chrysler engine junk...their first new attempt to make a diesel. It will not hold a candle to the VW diesel conversions....in mpg or torque nor longevity.
![Cummins R2.8 Swapping a Shipping Crate #RamRecharger [EP1]](http://i.ytimg.com/vi/xsmlMdlTW30/mqdefault.jpg)
While working at a Caterpillar shop in Key West, FL in 1979, a gentleman came to our shop with a 1957 Cadillac that had a 3208 Caterpillar engine with a Allison trans replacing the blown engine in 1967! He said it was not starting like it used to and loss of power! I found two injectors not firing but replaced them all with rebuilt injectors and had to do a valve lash adjustment as most were way out of adjustment! He drove from Marathon to Homestead five days a week 85 miles to his restaurant! The Caddy had 565,000 miles on it!
Great video... only thing missing was hearing each one run at the end of each interview!
We guys here in europe have it made when it comes to diesel engine in the jk. I have the 2007 jku sport with the 2.8 CRD that puts out 177 ponnies and a ton of torque (the number not on the top of my head). I added the pedalbox and it eliminates the turbo lag which feels like I have 200 hsp. But it doesn't stop there, I have a specialist that can reprogram the ECU and increase the turbo boost up to 1.4 bars which he said will draw me close to 245 hsp.
Excellent survey of options here. These guys display a lot of hard work and creativity.
Awesome video! If only these engines were available as an option for today's SUVs and light trucks, like the Toyota Tacoma, etc.
Jeep put a cummins in your darn wrangler already!
Jeremy Taylors looks sick , factory looking with the extra to make it cool , way to go Jeremy
Really want a 4BT in my Cherokee.
You and me both. Might be in the cards in a few years as I've just framed out and boxed out my entire unibody it's now so SOLID and I have a 8.5" long arm lift to fit it right. I would be a perfect swap candidate for one since the stock unibodys eventually snap spot welds once you wheel for a few years of tough serious offroading. I've heard whispers of 30 mpg paired in with some sort of automatics which would be great for me as I've no interest in manual transmission especially for a 50/50 daily and every weekend wheeler but would not believe it till I clocked those mpg myself. Gearing is key to all of it I'd suspect.
I want an SJ Cherokee to put a 6bt in it.
I'm just east in columbus Ohio, I've got a 1995 YJ with a VW 2006 BEW 1.9 TDI I'd wager to say it's even better than that 2.8, 180hp 280tq, and 30mpg all day, with 33s not to mention parts availability
Sweet. I am putting a 1.9 ALH TDI engine and ENTIRE ELECTRICAL mk4 harness into my 1966 split window bus. Should be fun.
i live on the east side of columbus as well. Needing some help on a swap.
Eighty cc I have owned multiple ALH jettas and Golfs. Lol ALH are a Million Mile motor with proper care.
Eighty cc get on Facebook send pictures to Cherokee Ronnie
@Space Cryptid depends on the year but yeah usually get %50 more power for under 1000$
love all my cummins chrvy,s 90 5.9 ddflatbed and 81 c 10 3.3 5 spd 30 mpg
Awesome !!!
I always thought of getting a Scrambler with a regular Wrangler interior layout, hard and/or soft tops but having a custom (form fitting, lid angled) storage box (trunk) behind the top and 1 to 2 inches below the rear window.
I like the idea of the Cummings for better economy (biofuel?).
Did these guys do any frame strengthening before they installed a diesel engine in a Jeep. Like sleeveing the frames. Dodge used to have them twist the frames because of the engine torque in their Gen 1 vehicles and they stopped putting them in 1/2 ton pickups only 3/4 and 1 tons. I do like the engine swap tho.
I would LOVE to do this....but oh man, the COST!!! Even with my cummins employee discount the R2.8 would be as much as buying the used jeep to put it in...not to mention the man hours and tooling.
I gotta give credit to all the work put in. Go for it if you have a passion for diesel. If you just looking for torque, just stroke a 4.0 to 4.8 and do some work the cylinder head. Same torque as a R2.8 but roughly 100 more horse power. I live where it gets cold enough for diesel to gel on a nightly basis for weeks. It's just too much work to make diesel fuel systems reliable in sub zero temps.
this is a perfect option for the 99 fourbanger Dakota I have.... but this crate engine is almost ten k
Like to see a Cummins swap into a 90s Durango or Dakota....maybe a variant of the ISV.
I agree. There's a lot of people with blown 4.7's that would jump all over this for the right price and parts.
About to do a 5.9 cummins in my 98 durango 4x4.
There's actually a good amount of videos on YT of Cummins powered Dakota's, It's actually a pretty popular/common swap. I live in small town FL within a county of
Finished yet with the swap? We want to know!
It would’ve been helpful having more consistent information/ questions between each motor, hp, torque, fuel economy, cost, what each Jeep is used for...it’s hard to compare without comparable information
nice.. I do love a SUV/4WD/Truck with a diesel... what I would like is Cummins to produce a 4.2+ V6 diesel...
Jackal's Outdoor Channel yeah that be Rad!! I was thinking that it possibly a 4.0L straight 6
Cummins R2.8 just came out & is looking pretty sweet... 'aside from the Cummins price tag.
That and it's currently limited to OBD/emissions compliance for 1999 and older vehicles }:(
Love it it , but as most times it’s not cost realistic... more work than I expected!!!
Would have been nice to maybe hear them run at the end you know, each by themselves. Otherwise very informative. I had so hoped to see a KJ Liberty in there with the swap of one of the motors but no luck there I guess. Anyway, nice video. Thanks.
Hopefully it's better than the e-rod, as far as getting your BAR sticker goes. Long story short, the e-rod is a waste of money and requires about the same amount of hoops to be jumped through to get approved. It's not like a cold air intake. You don't get to just slap an EO sticker on and show up at your local SMOG shop.
complex work
would like to see these perform
⁉️
👊
🔥
Guys, i will need your help...in my JK '12 i putting a chevy 307 engine...do you know what automatic transmission to use best for this?...thank you
Where can I get one of these Cummins engines
That 2.8 is a fantastic idea, and I am glad it is out there, but I just can't help but be disappointed. It is too expensive and too under powered for its size. 2.8l is about half the size of the 1 ton truck engines, but it is only putting out 1/4 the power and torque. Meanwhile, european diesels are 2.0l or less, but put out 25% more power and torque than the 2.8l cummins.
This 2.8l by all rights should be putting out at least 225hp and 350lb/ft, and should be doing it for $6k. For the $9k price tag they are asking, it should be *AT LEAST* 275hp and 400lb/ft.
cummins historically under powers their engines to ensure they can get massive mileage before needing rebuild, it doesn't take much to pump their power, there are already people with ~200hp and 400ft/lbs of torque on their 2.8's so the numbers are there they just have to be tuned in.
@rNorock - I see your point, the price is high and (for better or worse) that's about what one would expect from Cummins. Cost aside, the R2.8 looks pretty sweet given the fact it ships 95% complete, is OBD compliant up to 1999 (and eventually beyond 1999), it's also fairly light/not a boat anchor and has a fairly small foot print, which makes for a very versatile/compelling diesel swap option... plus folks are finding they can tune em 90hp over the stock 161hp with no internal engine mods. The price btw has actually dropped a bit year to date and could drop a bit further given a little more time.
@@eliminster06 oh? So I have to spend $9k for the engine, then another several thousand to make it run like it should from the factory to begin with? No thanks.
thought it was supposed to be 210 hp 350+ ft-lb
In Australia we are a bit spiolt with 1HZ and TD42 mills in our favourate cars. My 91' GQ TB42 is a fuel pig and the R2.8 ... some of the chev swaps I've seen are to much. My dayly drive is a 65KW HJ45 landcruiser and I know my 4BT in my 6.3m boat is and are the best. I would love the range available with the R2.8 aaand the china girl I've talked to about it make it attactive. In Townsville we have a reliable flow of commmon rail diesels from the wreckers. Is the R2.8 worth in? BTW I've seen this vid before.
Is this 2.8L Inline 4-cyl the same as the 3.0L Cummins engine in the Frontier that TFLnow reviewed?
Any swap suggestions for my 2004 Jeep Liberty CRD Limited?
I watched the whole video waiting for an exhaust note
I would like to see a kit for a willy jeep. Like CJ2A.
Yeah im puttin a 903 in a 58 willya and need a kit :-D
Hmm. No ISF 3.8L. Shame.
Shame they didnt at least start them up.
Hello, I'm in california. I have a '99 XJ i would love to convert to a cummins 4bt. Any more info regarding the legality of it? It was mentioned that it was legal, so thats what sparked my interest.
Looking to swap a cummins into a Suzuki samari of a 2000 ford ranger do you make a kit for either one?
The last guy with the prototype jeep acted like he was making a drug deal the entire time. Prototype diesel must be fire...
I want to swap an Cummins V5.0 into a jeep.
I wanna do a reliable 5.0 Cummins with a triple turbo 1 step up compounds and keep it legal all in my LJ lol
45 MPG!!!! dang!!
If those Cummins engines are great for Jeep Wranglers, then how about Chevy Caprices as those options.
I thought OBDII was required from 1996 and newer?
Paul Jeppson that's what I thought .
OBD issues aren't likely the only problem, I'm guessing it's also an emissions game thing as well. Which (if true) it figures... given they refined nearly all the sulfur out of diesel fuel and seemed to think that wasn't enough and went on to mandate Def fluid. One good/great thing at least, if anyone can figure out a solution around these issues, Cummins certainly will try their hearts out! Unfortunately however, I don't see the R2.8 being legally swappable/getting cleared for 50 state compliance in vehicles beyond 2012...if it even makes it that far(!) One can hope, but not holding my breath when it comes to EPA red tape.
The 2.8 is $9,000 thats way out of most people's budget
uhh. 96 an newer is obd2 by law. Theres probably emissions law reasons it cant legally been done.
i have a 99 ranger in great shape.. wondering if the 2.8 isf will adapt to the computers and electrical system.. i want a ranger that can tow, crawl and maybe even tear it up at silver lake with a few propane shots..
Would probably be worth just looking into a 4bt. Mechanical and have worked very well for people.
Bob Sagget thought about it. Alot. But the issue i have would be the weight. And the r2.8 has more power than the 4bt and weighs less, revs higher, and has more modification within programming before components need to be upgraded.
heres how to beat emissions, move to a state like florida that doesn't care or test for emmisions
I guess they will get the last laugh when underwater due to climate change...good thinking.
Don't move to FLA, Don't need more NPC
@@joelt.sprecher2287 I'm sure the emission testing works great in China
At least until the EPA can no longer stick it's head in the sand regarding the red tied issues...
Amen to that!!! I just moved to Arizona from Florida because job transfer and brought my diesel truck all deleted. Not good
Less talking More revving
Would this work in an 87 Suzuki Samurai? Would the stock drive train handle the power?
I have no idea if it would work but that would be the greatest thing to see. A Cummins powered Samurai would be hate proof on the trails, everyone would love it.
I know there's a TON of people out there that have a 4 cylinder engine in their 1997-1999 Jeep Wranglers that want more power. In all the forums, all they are told to do is sell their jeep and buy a new one with a bigger engine, the swap isn't worth it. Will Cummins make these engines doable for people like me with the four cylinder without having to weld on new brackets? I'm fine with swapping out the engine, transmission, and tcase, but I'd do away with the welding if i could.
Bobby Dean welding is easy. Welders for the hobbyist are cheap. Use a flux core welder and you don't even need gas. Not the prettiest welds, but plenty strong enough
No. The diesel is too heavy for factory mounts. Im a decent welder. And my lovely girlfriend is too.
What lift pump was used on the QSB?
The engine has an integrated lift pump on the back of the ecm mounting plate
@@patrickwayne3701 Thanks, I have a 3.3 in my 66 Fairlane and after 30,000 miles am having a check engine light.
@@nealbacon7798 cool platform- 66 Fairlane,,, there's ALL KINDS of folks who would eat that up, to see it on RUclips,,,, just sayin',,,,
And I presume you mean the mil light is on the Murphy guage? (As the only 'trouble' light a 66 Fairlane had was a low oil pressure light....
And I am not aware of a 3.3 being outfitted with electronics, to even HAVE a Murphy guage.... are you sure you don't mean a 3.8? (Or a 2.8?)
@Neal Bacon ok, so did you do the repower? Or does the party who did it have access to Insite, to check the fault codes with?
The description SOUNDS like a protective de-rate is taking place,, and with the electronics on the QSB series, it can be something as simple as the ECM losing the signal from the coolant sensor, or any number of other ECM inputs that are considered 'critical' to operation.
The 'dead pedal' you describe, makes me think it's a critical signal, the ECM is seeing a problem with because thats our protective way, to be sure the operator HAS to pay attention to the engine systems, is if it won't perform,,, they will (hopefully), have to scratch their head and look it over, instead of just beating it into the ground.
So, all the simple stuff applies,,, oil pressure (and level, of course), the cam and crank signals and wiring between them and the ECM, the coolant sensor and wiring, the IMTP sensor (Intake Manifold Temperature and Pressure), Turbine speed off the turbo, (if so equipped), WIF sensor (Water in Fuel), and so on.
Basically, if you have had 30k of operational bliss,, what changes? Fluid levels, and Filter health, and environmental factors like rodents in the shed you park in, and a myriad of other things you start from by observing K.I.S.S.,, Keep It Simple, Stupid. Eyeball inspection of all connectors and wiring, then, a scan for fault codes, and it will become very clear in short order.
@Neal Bacon I always have to smh at what some places charge, just to hook up and identify the FC's, but I understand what a business plan is, and has to be, to be in business.
Was there a driving video?
An easy swap and a hell of a lot cheaper is the 350 Chevy into the Jeep. Gas is cheaper than Diesel fuel.
Craig Pennington but diesel last longer, blessing in a jeep
i want all your jeeps! all of them are mine mine mine. every single jeep will be mine
anyone can tell me what are those mag wheels installed in every jeep?
How much for a new engine?
Like how you caught yourself. Yes it's an Engine not Motor.
The funny thing about jeeps, if you take them off road and do some serious off roading you have to replace literally everything to a heavy duty component because all the drive line and suspension is very weak.
That’s why I regret getting one you gotta dump money on it just to keep it from looking like a lego car and for it to drive decently on the road. Only worth it if you offroad every week
What?12K for the Cummins, and 5K for the swap .WoW. Insane people, must have money to burn. TH
It's about $13,000 total now ($8000 for the R2.8 plus $5000 labor / parts). Much cheaper in just 1 year.
10MPG?
I was very disappointed there was no 12v
Nice vid i was thinking 25 mpg
92 f-150 swap 4 BT
Are they all computer controlled, or are some mechanical controlled?
The third one that the guy took out of a stepvan, is mechanical. The pump is known as a 'VE' type. Its rotary, and the style of the first gen Dodge Cummins powered trucks.
So way would I need ?
how fast can you go on the highway mph for R2.8
Why not a 6.7
Will it fit in a fiero?
Louis Babycos, yes, it would fit physically in a fiero.
Take my money!!!
i want to get a R2.8 for my XJ, idk what the price is yet.
ClunkGam1ng 9k
meh. its awesome to have a diesel wrangler but i feel like there are better ways to get more powah
does it work in a Jk ?
Riddle me this... Batman. Thanks you answered my question to.
NO START UP?!?!!?!!!!!?
Quality of the video is a bit poor.
Really .. Cummins should have brought back the 5BT stroker motors that went into step vans of the 1960's and 1970's .. I have a friend with a jeep with no squeeze and it has so much torque that it can go anywhere .. It was about 110 bhp but it did not spin up past 2100 rpm's .. That engine got 60 mph in a 1998 Wrangler .. It doesn't go real fast but who cares with that mileage and that much torque .. WHO NEEDS BRAKES with that engine !!!!!!! Just let of the gas and that sucker slow right down ..
CUMMINS BRING BACK THE 5BT " P L E A S E " .. That motor in my friends jeep has gone over a million miles !!!!!!!!! .... Low rpm's = less friction = long life = best in class fuel economy = best choice for those who want to trave 900 miles on a single tank ! ..
yeah 2.5 gas is what I can afford!
2nd 4o last; 3.07 gear on 35s and a Cummins? Wow
Can anyone say "Grenade!+" (waiting ro happen)?
I am looking for someone to do an engine swap for me on my Low Low 62k actual mile 1987 S-10 blazer 2.8L anemic V6 4X4 Tahoe. The Blazer is MINT. It looks like it was never sat in. Under the hood it looks like it is still on the showroom floor. The original 2 tone blue paint still looks mint. This was an estate sale vehicle vehicle, I am the second owner. It has been garage kept and senior citizen owned since new (and it still is garage kept and senior owned). The 2,8 V6 is worse than a slug and I do not want to slam a V8 in it. My hopes are for a Cummins 4BT or other Cummins(I hear they have incredible 30+MPG, or I am also interested in the new 4 cyl turbo 300+HP Silverado engine (If I can actually find someone that can get it to work with all the computer crap). I am in Tennessee. If you are up to the challenge or know someone that is, please let me know.
10 mpg on the 4bt!!??. Something is definitely not right there
I thought so too. He said it has 1 ton axles with 4.56 gears so maybe that is most of it.
He’s jeffery_the_jeep on instagram. He’s also part owner of Axis Industries. If you look at how he wheels you’ll see why it only gets 10mpg. Lol. Also he has a build thread on Jeepforum. Jeffery 2.0
Kross
..and twice the weight of a petrol equivalent amc engine!!
😂 what a Chinese tractor motor 😂😂😂 foton
damn...too bad Cummins havent switched to the new CGI foundry methods yet....i would consider owning Cummins if it was made with CGI tech....just sayin'!!
those are cool but im not going to pay 9,000 for it thats not worth it for the crate mot
The 2.8-liter, is the worst engine Izuzu ever made! Ps. It's that engine that comes on the Wrangler to Europe!
Nah the diesel jk has a 2.8 crd
Made by izuzu, I speak with experience of cause, I paid the repair price! A lot...
Sérgio André wow I didn't realize they were that bad of an engine
It is not by coincidence that the Jeep practically nothing sells in Europe. Especially the Wrangler !!! And the guys from FIAT have good diesel engines with IVECO(3.0lTurbo or bi turbo) ! They sell them in the US with Chrysler. Is the only problem with the wrangler, gearbox with 6 speeds (and manual), automatic (5 speeds) transfer box 5 STARS, the engine is that sucks, but, great indeed! In my, I moved to a toyota 3.0 diesel, and i smile every day!
An ex GM company (Opel) also sold that engine, a catastrophe!
You will soon have in the US an excellent French diesel engine for sale at Ford (raptor, etc.)
Yeah, $40K later...
K&N filters are crap.,paper is the go,.
CAlifornia is 97 and older for smog exempt for Diesels not 99
Give me the 6.4 Hemi.
Can I stuff one into my Elantra?
You can now order the JL with a 3.0 liter Ecodiesel from jeep with higher HP and TQ numbers. So why would someone want to sink thousands into swapping in a Cummins diesel. You will void out your powertrain and drivetrain warranty also.
That engine , the r2.8 is for preemissiones cars
more AMC Chrysler engine junk...their first new attempt to make a diesel. It will not hold a candle to the VW diesel conversions....in mpg or torque nor longevity.
WTFFFFFF... at least start it