I buy 2019 outback & 2017 ct200h remote start kit from your company this video helpful,hope you guy can made Outback install information vid too please!
It has been some times but finally I installed this unit today. And there are many problems. 1. There was no ‘install instruction manual’ so I just followed RUclips video. Opened those two panel and then installed two cables exactly what the guy did in the video. But when I switched startup button twice, the unit didn’t work. 2. I removed the unit and I realized that the car doesn’t recognize the parking brake is released. Now the parking brake lamp remains on. 3. I re-installed the unit and pressed the button twice again. Nothing happened. The car was off during the whole time. 4. But somehow the OEM fob works. I pressed three times outside the car and the car starts up. But if I opened the car door, car turns off. 5. So I tried that three times pressing inside the car, it starts up, but then if I press the brake pedal to shift to Drive, it turns off. 6. If I open the door when the car is on, not pressing brake pedal(because the car will turns off) the siren turns on like the car is robbed. 7. Inside the car, when the car is off, I press the fob three times and holds, the car turns on and this unit’s green light is flashing slowly. I let that flashes few minutes thinking it might ‘programming’ or ‘processing’ but it never stops. I am not going to ask if these are normal because they clearly not. The biggest problem is the parking brake lamp is on. Because it beeps and never stops. Thought? Suggestions? The order number is ACC11983723 and the 10th letter of the car was ‘f’. It is 2014 or 15 I forgot.
Why didn’t you show us the remote start procedure after?
Showing someone pushing the lock button on their fob 3 times would have been thrilling!!!
I just installed it on my 2017 lexus ct200h. It was a really easy. I spent about 5 minutes to install it.
did you have to program the remote?
Can you install the remote start without needing to disconnect the battery?
Hello dear ,
Hey I have 2013 Lexus CT200h, do you have remotes starter for that car ?
Excellent question!
Me too
I was going to buy this immediately then wanted to know if it was good for my 2013
Just installed on mine. Works great.
Hello, can i buy One for my 2013 ct200h ? Im from Italy
Plase write me 👏
Need help removing that computer cable any tips ?
Lower left hand push tab forward , using right hand, use rings to pull out should take much. After this putting it back in was weirdly hard too
Works on 2013?
I buy 2019 outback & 2017 ct200h remote start kit from your company this video helpful,hope you guy can made Outback install information vid too please!
It has been some times but finally I installed this unit today. And there are many problems.
1. There was no ‘install instruction manual’ so I just followed RUclips video. Opened those two panel and then installed two cables exactly what the guy did in the video. But when I switched startup button twice, the unit didn’t work.
2. I removed the unit and I realized that the car doesn’t recognize the parking brake is released. Now the parking brake lamp remains on.
3. I re-installed the unit and pressed the button twice again. Nothing happened. The car was off during the whole time.
4. But somehow the OEM fob works. I pressed three times outside the car and the car starts up. But if I opened the car door, car turns off.
5. So I tried that three times pressing inside the car, it starts up, but then if I press the brake pedal to shift to Drive, it turns off.
6. If I open the door when the car is on, not pressing brake pedal(because the car will turns off) the siren turns on like the car is robbed.
7. Inside the car, when the car is off, I press the fob three times and holds, the car turns on and this unit’s green light is flashing slowly. I let that flashes few minutes thinking it might ‘programming’ or ‘processing’ but it never stops.
I am not going to ask if these are normal because they clearly not. The biggest problem is the parking brake lamp is on. Because it beeps and never stops.
Thought? Suggestions?
The order number is ACC11983723 and the 10th letter of the car was ‘f’. It is 2014 or 15 I forgot.
Toyotas/Lexus will turn off after opening door if remote start was used. (Safety feature)
@@jesus6964 any way to flash that setting off with a laptop or something?
Same what happened to mine 2012 , just installed today.
looks so easy