TKX Debut and Q&A Session
HTML-код
- Опубликовано: 8 ноя 2020
- Jeff Kauffman did a Facebook Live video on Nov. 6, 2020 as we debuted the TREMEC TKX 5-Speed and took questions from our Facebook Followers. He covers all aspects of the new transmission and gives a nice view of the transmission from several angles. ShiftSST.com for more information.
Авто/Мото
![Cordae - Saturday Mornings (feat. Lil Wayne) [Official Music Video]](http://i.ytimg.com/vi/z2GYJua09F0/mqdefault.jpg)
Received mine today for my foxbody. Customer service was great. Talked to Jeff personally when I ordered. Shipping was quick and received everything! Glad I called them.
Thank you, Larry!
Awesome! Can't wait to get one!
Soon!
Excellent video!
Nice looking transmission
We think so too.
For a more race than street driving what would work best wide or close ratio
Ηi,this gearbox is it good for quick gear changes at high revs about 7500-8000? thx
No cutting floor of my classic Nova and will shift at 7 grand where my 396 loves to go. This is a game changer !!!
We like it! ;)
What year Nova?! Looking to get this for my 69 if I can ensure no cut.
@@choddarmfelt7319 68-74 should not require tunnel cutting. aside from hole for shifter.
@@BBBILLY86 Thanks for the reply, I appreciate it. Good news.
@@choddarmfelt7319 It will go in with no cutting.
I installed my TKO 600 5 speed in my mustang and it seems to be a little clunky thru the shifts? Not as smooth as I would of thought? Does it just need to be broken in or what? It shifts some what easier after it warms up but still clunky?
Did you purchase it through us? If so, give our techs a call at 888-609-0070 and they'll help you diagnose. If not, did you check your bellhousing runout and make sure it was within spec for the TKO? Are you using an approved fluid (GM or Penzoil Synchromesh, TREMEC HP-MTF, Dexron/Mercon ATF, or Mobil 1 ATF are the only approved fluids)? Do you have any difficulty getting into first gear from a stop?
What bellhousing will be needed to bolt this up to my LS2? Currently have a 4l60e.
shiftsst.com/silver-sport-transmissions-ez-ls-conversion-kit.html
Do y’all have a perfect fit kit for this in a 1968 Mustang? If so does it require any cutting or tunnel modifications and what is the price?
Yes, mods are not confirmed yet. You can get a price by calling 888-609-0070 or visiting ShiftSST.com.
Do you have any info on the fit in a '63 Pontiac, with the trans tilted about 20 degrees towards the driver?
Call our technical sales staff. They might be able to help. 888-609-0070
I bought a TKO 600 a few months ago for my build, now what?? It would have been nice to know this was coming out.
None of the TREMEC dealers were authorized to speak about the TKX. The TKO is an excellent transmission, 10s of thousands of people are very happy with their TKO. However, if you have buyer’s remorse, you can try calling your dealer to see what they say or listing the transmission on an online marketplace. There are many people out there looking for TKOs; we’re still selling them every day.
I agree Doug. I got my 600 9 months ago and i hate the way it shifts. Tremec could've, and should've improved the shifting on that transmission a long time ago. the fact is they knew how to make it better, just use t56 shift rings or whatever it is. (SST, my BH allignment is dialed in, i'm using Tremec MTF, and the driveline angles are within spec) this really PMO!!
@@chris2-459 Hello Christopher, There is no reason for a TKO600 to shift badly. I looked for your purchase in our files but was unable to locate it. Perhaps you purchased it under a different name? At any rate, if you are having a problem with your TKO600 shifting, please call our Technical Advisors at SST and they will be glad to help you diagnose the problem.
67 Fairlane FE engine no console. Tunnel cut? Input shaft? Number of splines? Cross member? Is there a short shaft version available as of 4/23, or is a spacer plate still required and do you stock?
You don't have to cut the tunnel of the 67 Fairlane. You can choose between 10 or 26 spline input shafts. It will reuse your stock crossmember. We have a short shaft and a spacer; your choice. The short shaft is more expensive than the spacer.
What are the dimensions on the 31 spline yoke ? I have two 31 spline yokes and they are different lengths and the longer one is smooth barrel for about 2 inches .
Yoke length will vary by manufacturer, part number, and vehicle. They're not all the same.
Tremec should have addressed the lack luster 2-3 ratio spread instead of taking some of the overdrive out of it.
I would much rather keep the .64 in the 600, and see Tremec with maybe a 1.34 3rd gear. As it stands right now 1.89 2nd to 1.28 3rd is a big drop, twice as much as the overdrive. Fix 3rd gear and you would be much closer to a true close ratio trans. Leave overdrive alone.
Just my thoughts on it. I've used a bunch of the 600's. I do like the slim case and higher rpm capability of the new TKX though.
So, in dummy talk.
Can you explain the difference between the wide/close gear ratios?.?
@@DeathByLego A close ratio is just a closer gear spread so there isn't as much rpm drop between gear changes. A wide ratio would be the opposite. For instance, the 1.28 3rd to 1:1 4th is a close ratio and is identical to the M-21 3-4 gears. However the 1.89 2nd to a 1.28 spread from the 2-3 change on the TKO600 is a very large spread and subsequently quite a bit of an rpm drop.
TKO always referred to the 2.87 TKO600 as their close ratio model but in reality only 1 gear change is really close ( the 3-4). 1-2 isn't horrible but could be slightly better, the 2-3 is a bunch, 3-4 doesn't really need to be that close, and 5th was just fine. It's really noticed when driving around town and slowing for a turn. Coming out of 4th to 3rd really isn't enough, so you have to use 2nd and most cases it ends up being a bit much. A 1.34 3rd gear would be helpful and help bridge the gap.
The trans that really had it right was the LGT700 with it's 2.66/1.78/1.30/1:1 but the .69 overdrive was a little less than I prefer. Unfortunately that trans never got off the ground for long. I'm more of a fan now of the Cobra spec T5 with 2.95/1.91/1.34/1:1 and a .63 overdrive. Very nice ratios and works fantastic with 3.73's. Anyway, hope that helps.
@@firebirdjone would most people notice these?
Do you think the gear ratios matter for calmy cruising and the occasional rapid acceleration?
I’d like to get the TKO or maybe the TKX in my near distant future - hooking up to a crate 350.
Ahh, the turn thing clicked. I usually slow down a gear bit or I go up a gear(don’t want that much power coming outa a turn).
@@DeathByLego It doesn't really matter to most people. The only complaint I've seen the most is the .64 overdrive and the drop from 4th to 5th but I never understood that myself. The complaint was coming from guys stating their engines wouldn't pull it, and too much rpm change to drop to 4th, which I thought was funny because my little DZ 302 with 3.55's out back has no trouble at all pulling the car around in 5th gear with the .64 ratio, even climbing the mountain grades as slow as 55 mph. So I guess guys complaining with much larger engines must be in a really sad state of tune. Yet the 2-3 change with a .61 ratio drop, nearly twice the overdrive drop, goes unchecked?
It's still a great trans, I'm sure you'll be happy with it. The overdrive will completely transform your car and driving experience. I highly recommend it.
I just got mine and it fits with no cutting in my 71 chevy nova but the however my engine and transmission angle is now down almost 5 degrees. I hope this will work im not wanting to raise the tunnel.
As long as you have stock engine mounts and our crossmember, you should have no issues, but if you do, give us a call and we have some other options that will raise the angle and should still have plenty of room in the tunnel. 888-609-0070
Do you all have kits for 3rd gen Camaros? I notice there is no torque arm mount like my TKO
We have a kit coming soon, 10-12 weeks.
Can this transmission be power shifted or do we need to Granny shift like the TKO!
The TKX has a multi cone synchro system like the 6 speed. Shift it like you stole it!
Anyone put one in a 55-57 Chevy yet? How does the shifter compare to placement with a Muncie 4 speed?
We offer numerous shifter positions and can duplicate the Muncie shifter location for a no-cut install.
Which starter to use with sbf289/t5z/157 tooth flywheel?
Any starter for the 157 tooth flywheel application.
Has anyone done a documented install? I am close to pulling the trigger on this, but I want to make sure there are no floor mods required. Thanks!
What car do you have?
@@SilverSportTransmissions 69 GTO Convertible
@@billcole9481 An install was performed on a ’69 Olds which has the same floor and no cutting was required. This install was performed by TREMEC using a TKX that was prepared for them by us with our STX offset shifter.
@@SilverSportTransmissions Appreciate the response.
Is the tkx the same length as tko will I be able to install in my 2010 gt mustang and will same bell house work as a tko
The TKX would not be a good fit for the 2010 Mustang. Call our technical sales staff to talk about which transmission would be a good fit for your application. 888-609-0070
@@SilverSportTransmissions think you I will, I had a tko in my 89 mustang and it was good. . I just installed a ford aluminum driveshaft and 390 gears. I want to use this driveshaft and upgrade trans clutch/flywheel a get everything at one supplier to make sure all is compatible
@@jameseller2954 We look forward to speaking to you.
I have a 240Z that uses a 280ZX turbo 5 speed It uses the Ford narrow. It's essentially Non world-class T5 out of a Mustang with a different bellhousing. Is that the same Ford bolt pattern That you would find in an 80s Mustang?
So I did my own research and came to the realization that they only do the Ford wide pattern.... smh which is stupid. They should do the Ford narrow pattern. how many Mustang guys are going to want to buy that transmission. But what they're going to have to use an adapter plate. I mean how hard is it to drill another pattern. They make this transmission Solely for people to swap into Vehicles.... why don't they make each transmission a dual pattern.
No, the TKX uses the old Ford Toploader 4 speed bolt pattern which is different than T5.
Weird that it is Toploader "butterfly" pattern AND you need a spacer in order to bolt it to a 60's ford bell housing. Do you need a spacer for big and small block engines? And if so, I imagine they would be two different thickness spacers. Is the output spline count 31 or 28? Also does the mechanical speedo location clash with the cross member? It looks close.
Is there an input shaft "short" for a Ford FE?
Not at this time, you have to use an spacer plate instead.
What do I need to bolt into a 95 mustang gt, sn95 302 sbf?
Hi Matt, give us a call at 888-609-0070 and we'll give you a complete quote with all the parts.
How will it fit a 1964 ford ranchero and shifter location?
We offer multiple shifter locations for TKX and can duplicate this one as well. Call us and we’ll be happy to discuss. 888-609-0070
I have a 1961 chevy bel air it currently has a Muncie 21 will the tkx fit shifter location and all this is a B body car
Yes, we have an STX Shifter position for your application. You can see a photo on our website and request a quote too: shiftsst.com/blog/post/gm-b-body-1958-1964.html
it figures mopars get screwed cant use factory bell housing and need to drill crank for special roller bearing
Is the shifter in the tkx as stiff as the tko 600?
No, the shift feel is light and is similar to the TREMEC Magnum 6-speed.
Is there a kit for 67-72 ford f100
Yes, there is! 888-609-0070 for a kit price.
For 67-72 F100, is there a mid shift?
@@hvspeed6102 Yes, there is!
What about 1962 Chevy impala and shifter location??
We have one!
What is the electric speedo pulse count?
GM or Ford?
Any idea who deals Tremec in Australia please?
Sure, we have a couple of recommendations for Australia: malwoodauto.com.au and www.austtrans.com
Will this transmission work with a 410 gear
It will!
I need to see the shift pattern. I dispise the transmissions with the reverse (low speed gear) all the way across near the high speed gears. That is not just wrong, but it is bad wrong, and makes no sense.
135
24R
What is the shift pattern?
1-3-5 up, 2-4-R back, H pattern
Will it fit a62 vet
Yes. 888-609-0070 for a quote.
If I can get that into my A Body (Mopar of course, the only A Body in my book) without having to cut the tunnel (other than for the shifter hole) or cut the torsion bar cross member then "Shut up and take my money!!"
@Ragingbull340 well hopefully they can test fit it in an A Body sometime soon. I volunteer my Duster. LOL if I have cut the torsion bar cross member, then I might as well go 6 speed. But ideally, I want to be able to put in an overdrive transmission in my driveway without any welding.
@Ragingbull340 i was thinking the same thing. Would be great if I can bolt my stock bell housing to it. I currently have a 4 speed.
Whats the weight of the TKX..?
99 lbs / 50 kg
That's a dry weight, no oil.
Like to get one but I have a 77 chevy truck . I have a muncie in it .
We have a kit for the 77 Chevy Truck. Even if it's 4WD, we've got something for you. Give us a call when you're ready to get an overdrive! 888-609-0070.