This guy is good, he went out his way to answer my questions when I emailed him. As busy as he is he still found time to reply and help me trouble shoot some problems. This will be a great automotive locksmith channel coming soon! Thank you !
obviously you bypassed or immobilized VATS and or PassLock security or a 2000 wouldnt have run for more than a second or two without it getting the ignition and fuel shut off by the ECM. Other than that tidbit it was a very instructional video and I am a mobile mechanic w 30 yrs experience. disclaimer just in case I cant remember if 1 ton and fleet vehcles IE: C6500< are not VATS protected. Sure would like to know so I can file that away in my head. Again great video and I totally dig the key machine. bet that wasnt cheap. Ive been considering picking up some locksmithing just to add to my repotoir. Do you think that its an oversaturated field. Ive already got all the software to program keys for the most part anyway. I cant stand how the few guys in my immediate area gouge people for 400 bucks for what I literally do for 125 bucks and bypass the system and put it on a toggle switch for remote start function to work(wont work correctly w system immobilized. Have a great xmas
THANK YOU!! Worked perfectly! If you don't have a lockpick to bend, you can use one of those plastic toothpicks with the flosser on the other end. It's thin enough to fit and bends on its own to get the job done!
Just wanted to say this saved my ass today on my 2000 s10 blazer. You need a current registration to get a new key from the dealer. My registration expired so rather than go thru the current COVID bullshit at the bmv (standing in line for hours outside in 20 degrees & snowing) I opted for this option except I just popped an aftermarket lock cylinder in & I did not use a key like you did I just used another key from another s10 or blazer I had. I had 8 other keys laying around (yeah I’ve had a lot of s10s lol) and used the one that went in the ignition the most. Was done in less than 20 minutes! Thank you sir!! You earned a sub from me!
I just want to say thank you for making this video my key was stuck in my ignition and the truck would not crank after watching this video twice I had no issue using a pic set to get the ignition out running to the auto parts store to buy a new ignition for my van you probably just save me $500 from paying a locksmith
My van has been sitting in the Home Depot for two nights because the key wouldn't turn. It seemed like it wasn't going all the way in. Anyway, after watching your vid, I went back over, used this method, and started my van.... Right On!!! I just sent you $20.
Broo thank you!!! I watched your 10 minute video and I was in my truck in under 9 minutes after acquiring the tools. I made my own juggler key to look like yours and it worked. Thanks man!’ Thanks a ton
I think one of the main problems with this fix, for most people, is even getting to the lock cylinder. Taking the plastic pieces off is tricky and we need instruction on that as well. Thank you for your time and knowledge.
Dude thanks for the detailed video. Ordered a $16 jiggler set off Amazon and ground down one of the jigglers to slide in and hit the lock bar. 5 seconds with the jiggler key included in the Amazon kit and it turned over. I tried forever before without shimming the lockbar. Lifesaver, dealer cut me a key that wouldn't work and everyone else told me to drill it out. Couldn't get a locksmith out!
Excellent video. Thanx! I had to replace a no key Cavalier. Took me a full hour to drill it out in the HOT sun! Too bad I didn't know this 'secret'! Cheers!
Thank you so much for your video it saved my life I bought a new key ignition from rock auto and it didn’t work so I use my old key and used your method and I got it unlocked God bless you thank you so much if I was rich I’d give you money❤❤❤❤❤❤❤❤❤❤❤❤
GM really messed up and I'm a fool. Battery dead. My 05 Yukon has only one way in threw the driver's door key lock. But it was jambed and I was locked out. no passenger side key lock and no rear door key lock( nor a optional way to open from inside or to open window). I had to bend door and a long steel bar to open power lock but the battery was dead. Sucks. Finally was able to click the manual lock. Windows are power only with key on. Sucks. My kids can not roll windows down when I'm outside. Center dome light drains battery overnight. Suddenly the Radio clock went to 12:00 every morning drained battery over a few days (since I only drive 2 times a week) so I replaced the radio with a used radio but it was locked. Had to search radio unlock RUclips. Open radio removed tiny black chip. It worked but the door chime was 5 times louder. Cut the speaker tan wire to driver's door. Fixed that. But next day the radio clock was at 12:00 again. RUclipsr said it's my ignition switch. Sucks. Ordered one off of eBay 20 bucks. Took me 4 hours to figure it out with a RUclips. Waiting to see WTH is going to happen next. GM sucks. Every Chevy van or truck I buy has these issues with alarms power locks power windows grounding wires ECM fail. Chevy vans were the worst for those problems. Follow up: 18 hours later the battery is almost completely dead and I had the radio fuse unplugged and everything else was off. So it looks like I've got a parasitic draw somewhere in the vehicle and I will never find it so I have to unplug the battery every single night.
Mike, instead of disconnecting the battery shift the truck into Drive then turn the ignition to the on position without starting the truck 😎. Great content bro!!!
im trying to this right now on the same truck. can you tell me why i need to have the battery connected at first to turn the key? my battery is disconnected. my key turns half way and then stops at the on position. it will not turn enough to press down the tab. do i have to connect the battery? i have also removed the 'key in' switch on top to let it turn. and i drilled out the side bar and removed it through the key hole.
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
I guess they do not have a pass key chip in the key then. This truck was half missing the tumblers i got it out but it starts and dies loosing the ignition or injectors. Fuel pump cycles on each time notices it also wont shut off when i turned dhe key back each time. Im gonna assume the ignition switch itself is also partially broke.. Loved the video ty very much very good man to help so much.
Would this work on a 2001 chevy express? Keyway is B102- can I use Jiggler and a pick to depress side bar, or is like the old Chevy where u gotta remove wheel, lock plate spring ?
It should work for any double sided key ignition for chevy gm buik and caddilac.. just uses a different key .. have i sent you a pair of my jiggler keys?? For new and old style keys??
@@MYKEYSAUTOMOTIVE yea but i can't find them lol they are somewhere around here. I am actually watching your jiggler video now so Ill cut a b102 and b106 according to that video, thanks man
I do have a quick question? I have lost my key?? Will any key work to turn the tumbler to that click position ?? Or since I lost the key how do i over ride it to start my truck?? Im instaliing a transfer case motor and my truck is stuck in 4hi. The new transfer case motor instructions say that the 4wd must be in 2hi to i stall the part?? I have the drive shaft dropped and need to over ride snd manually shift it from 4lo to 2 2hi. But the truck has to be started?? Thank you for any advice you might be able to offer.
Thank you for posting the video. . I’m 40 year mechanic and I have never done a lock cylinder replace without keys on a 2000 suburban. Another close to working similar Chevy key was my jiggler. It worked with the wrong key in there only to turn and remove and replace with new.Stiff mechanics wire and a close Chevy key worked . Without your video I would of had to drill it out, thank you man. Where do you eat lunch iI will set it up one day to send the place you eat 20$ to buy you a nice lunch. I am an hour north of NYC. God bless and thank you sir! You video was a big help!!!!
So you were able to get it out without the keys? Please explain how because I'm trying this in a 2001 jimmy and can't get the ignition out without the keys
Thank you very much. This worked on my 00 Jimmy. You're a life saver! Ps I used my friends Chevy Silverado key as the jiggle key. Thanks again big dawg 😊
Hi im working on 08 chevy Colorado all keys lost i decoded the door lock cylinder but the ign cylinder has 2 more bitings that i cand find out with my tool max maybe i do something wrong can you help please
How do you get the rest of the cylinder out when someone has tried to beat it out with a screwdriver? I bought a parts truck and I wanted to first try and start the engine before pulling it and second possibly use the steering column and replace the lock cylinder but I can't get it to turnover to replace the cylinder.
We busted out the ignition on a 97 Chevy truck tried to start it up you know it's screwdriver and it wants to start tries to start but acting like it's not getting any fuel and the fuel pumps engaging but not getting no fuel can you help us out
Hey,I lost my keys to my 1998 Mazda millennia.can I drill out the cylinder and then the back pin to pop it out and if so can I then operate it with a screw driver?the ignition is on the dash.please help if u can.
Hello if u took out the drivers side door lock and put the number from the lock onto your key machine would it cut the key exactly as u cut from the initio?
Fantastic info mate watched all the videos on cylinder replacement ,they all said and pull it out with key in on position,well shit that was the fuckin problem i couldn’t turn it on to get it out!! then you popped up with your pick an jingle key ,all I had was a cheap little pick from the pound shop-dollar store in USA an it did the trick 😀thanks a million matey from Wales 🏴 Uk
Hello greetings 👋🏽 friend! For priority commenting, join our member club! once you join, you'll also be entered to win our monthly giveaway! If you want to join you can join from a laptop or computer next to the subscribe button you will see the join button! Thank you! 🙏🏼❤️
Do you happen to know how to get the black cap back on it doesn’t have that metal band and it’s flush, Also while removing the top housing I messed with something on the hazard lights which keep going. I can’t get it to stop. It’s my son’s car and I need to fix it.
I have a 2001 Chevy suburban that someone tried to steal so the area where where you put the pic in at seem to have been hammered now the lock cylinder will not turn to take it out how do I get the lock cylinder out
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Mate vehicle had one key. Vivaro van. Buttons were bad and remote not working. So programmed two new keys. Threw old in rubbish. All good. 6 weeks later one key not working unlock lock. Then day later second key stopped working. I was thinking it was autels fault. Or keys fault. But in truth as itd been happening before we turned up. It has to be something in the van. Immo maybe. Whats your thoughts?
Great video,very helpful.. was wondering why you have to depress that lever with a pick if your using a jiggler key to turn the ignition? Is this absolutely neccessary or does it just make it easier or ? Is this a Chevy specific security feature of sorts? Do any other makes use this as well? I've gotten several ignitions to turn with my jigglers and have never done anything like you do with the pick, but they have also all been done on ford vehicles.. just lookin to learn.. thanks for taking the time to answer my questions..
Yes it makes it easier on these chevy/gm older models.. for the newer high security keys they have this ignition lock removal tool by locktech give those a look !! I just purchased some!!
@@MYKEYSAUTOMOTIVE I'll check that out.. after I cut me a jiggler with a blank made for the blazer and depressed that I had the ignition turned over in about 2.5 seconds. it was a little too easy lol... I appreciate you making the video it helped me out a whole .. one more question if you dont mind.. is it possible to reinstall the lock cylinder without a working key? I tried to put mine back in before getting a key made and cant get it for the life of me.. I assume its because I dont have a real key in it just my jiggler... thanks
@@timmcgillvary9353 I believe its not possible to install it with out the key, since the sidebar only goes in when the key is in the lock cylinder and you need to kinda turn it while your installing it so it can sit in all the way.
@@MYKEYSAUTOMOTIVE That's exactly what I was thinking... I appreciate your quick response and all your help. You must definitely have a new subscriber and I look forward to learning more from all your videos... Keep up the good work and excellent videos!!!! Have a great day. I'm off to have a key cut now..
hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
The door was fairly easy..i used my lishi..... couldved found the bitting to the ignition with instacode ...but the ignition was once changed before ... so it wasnt the same depth cuts as the door... usually when they are non transponders i know the ignition lock cylinder has been replaced already..:((( Thank you for watching!!!
Ok so went to a Citroen c3. Said immo fault. Tried testing immo with im608 pro and if said immo fault. Nothing else but could not delete. So i went to key relearn and it said success. Car still no start. Scanned and immo fault still there. Customer said how car broke was the key came apart in his pocket. When reassembled car not opening and no start.
@@MYKEYSAUTOMOTIVE when i coded new key in then it started. So other key which was new but obviously had issues, we did nothing with it. Put it straight in the bin. Got to code another key in for the spare in couple days. Also got audi tt 2012 to do now. Picked that job up tonight
I have a 2003 Cadillac deville dhs I drilled out last cylinder now I’m stuck and how to proceed. Locksmith are to expensive someone please give me a recommendation thanks.
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
Amazing video. Had a question once u take the ignition out do you have to use the same one u pull out and make a new key or can u just put a new replacement ignition and key ?
Ok well heres the the thing... i like to just decode and cut to the original ign. lock cylinder when its the same key as the door... so they dont use two keys to operate the door and ignition ... but yes,you can always use a new ignition lock cylinder... the only thing is that, you wont have the same key for the door and ignition.
I took one extra step because I had no pick and since truck wouldn't start, well. Any way I broke off the outer ring with the 4 notches that are proud of the ring. Then I was able to insert a small Allen key and pretty on the keeper bar and 30 second of Chevy jiggle later, it clicked over. Instead of disconnecting the battery you can just shift to drive once you have it clicked over and it won't try to start when trying to remove the cylinder.
What if the cylinder been changed out before. Those dont have the keycode on them and the waffers look different on those years without numbers stamped.
@@MYKEYSAUTOMOTIVE once you get the ignition removals in a new one installed that does not have a security code how do you disable the security so you can start your car
Melissa Middleton your vehicle actually has a chip!! Believe it or not its in there !! This this is the correct key!! Pk3 small head www.carandtruckremotes.com/2006-pontiac-montana-ignition-key-b97.html?gclid=CjwKCAjw_Y_8BRBiEiwA5MCBJnY3J_lhJF7VwKOlL4dfVjbpX-2V1nHY-JAnKCVhMKG0Zta9H0e7jBoC1TYQAvD_BwE
Melissa Middleton you can try onboard programming but i don't guarantee it will work for you!! You start by turning to the on position but dont start car ..leave on for 10 min until light turns off then turn switch off for 5 secs then turn on (again but dont start vehicle).. for another 10 min... the off 5 sec than on again for another 10 minute
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Thank you , your videos are very informative..By any chance I have a 2016 street triple r and I want to clone and program a new key for the bike. I have the vvdi max pro. Does it work for bikes as well and do you have any videos on that issue ? 🙏thanks 👍🏼👍🏼👍🏼👍🏼👍🏼
Drill out the lock hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
Question: once the vehicle was able to turn over/crank with the jiggler, can you drive it at that time? Or will car soon die (I’m a female, I don’t know but I’m trying to learn)?
Yes.To get the top off you just break it off !!! He didn't show that part,but you can see where the plastic stem is with the 4mm bolt head that you have to remove to get the top cover off.Hope he doesn't work on someone's newer vehicle. 😆
This guy is good, he went out his way to answer my questions when I emailed him. As busy as he is he still found time to reply and help me trouble shoot some problems. This will be a great automotive locksmith channel coming soon! Thank you !
Bao Nguyen thank you brother!! God bless you always!! If you ever need anything let me know ok!! Blessings!!
Man ok where is the side bar???
obviously you bypassed or immobilized VATS and or PassLock security or a 2000 wouldnt have run for more than a second or two without it getting the ignition and fuel shut off by the ECM. Other than that tidbit it was a very instructional video and I am a mobile mechanic w 30 yrs experience. disclaimer just in case I cant remember if 1 ton and fleet vehcles IE: C6500< are not VATS protected. Sure would like to know so I can file that away in my head. Again great video and I totally dig the key machine. bet that wasnt cheap. Ive been considering picking up some locksmithing just to add to my repotoir. Do you think that its an oversaturated field. Ive already got all the software to program keys for the most part anyway. I cant stand how the few guys in my immediate area gouge people for 400 bucks for what I literally do for 125 bucks and bypass the system and put it on a toggle switch for remote start function to work(wont work correctly w system immobilized. Have a great xmas
Me gusta mucho, muy humilde, never loose la humildad
10:31 10:33
THANK YOU!! Worked perfectly!
If you don't have a lockpick to bend, you can use one of those plastic toothpicks with the flosser on the other end. It's thin enough to fit and bends on its own to get the job done!
Just wanted to say this saved my ass today on my 2000 s10 blazer. You need a current registration to get a new key from the dealer. My registration expired so rather than go thru the current COVID bullshit at the bmv (standing in line for hours outside in 20 degrees & snowing) I opted for this option except I just popped an aftermarket lock cylinder in & I did not use a key like you did I just used another key from another s10 or blazer I had. I had 8 other keys laying around (yeah I’ve had a lot of s10s lol) and used the one that went in the ignition the most. Was done in less than 20 minutes! Thank you sir!! You earned a sub from me!
Thank you for watching and im glad that i was able
To help!! Stay safe and stay warm!
I just want to say thank you for making this video my key was stuck in my ignition and the truck would not crank after watching this video twice I had no issue using a pic set to get the ignition out running to the auto parts store to buy a new ignition for my van you probably just save me $500 from paying a locksmith
Thank you im glad i was able to help!
You're a life saver. Had one of the apprentices screw up the tumblers on a new cylinder and your trick saved us having to drill it out. Thanks!
My van has been sitting in the Home Depot for two nights because the key wouldn't turn. It seemed like it wasn't going all the way in. Anyway, after watching your vid, I went back over, used this method, and started my van.... Right On!!! I just sent you $20.
Thank you brother i appreciate you!! God bless you!!
Broo thank you!!! I watched your 10 minute video and I was in my truck in under 9 minutes after acquiring the tools. I made my own juggler key to look like yours and it worked. Thanks man!’ Thanks a ton
Great video very helpful looked very easy without messing everything up and no drilling. Thanks.
Glad it helped
This guy is a Star. His video saved my a**.
Thank You!
No problem!!🫡🫡🏆🏆
I think one of the main problems with this fix, for most people, is even getting to the lock cylinder. Taking the plastic pieces off is tricky and we need instruction on that as well. Thank you for your time and knowledge.
More detailed than many other locksmith videos out there. Impressive visual on the whole process. Great job.
Thank you for watching!!!
Rh2t n.v a3nps8 was up
Exactly they talk really fast and don't show everything they did
Dude thanks for the detailed video. Ordered a $16 jiggler set off Amazon and ground down one of the jigglers to slide in and hit the lock bar. 5 seconds with the jiggler key included in the Amazon kit and it turned over. I tried forever before without shimming the lockbar. Lifesaver, dealer cut me a key that wouldn't work and everyone else told me to drill it out. Couldn't get a locksmith out!
👏🏼👏🏼👏🏼👏🏼 glad you were able to do it yourself and save you some money!! You can do anything you out your mind to!!
One of the best videos I've ever seen for mechanical stuff
Thank you sir God bless you!!
Looks like his profecion is locksmith so would have more knowledge n better equipped to do a job like that way to easily for him?
Excellent video. Thanx! I had to replace a no key Cavalier. Took me a full hour to drill it out in the HOT sun! Too bad I didn't know this 'secret'! Cheers!
Thank you for watching! Hope this helped!
Thank you so much for your video it saved my life I bought a new key ignition from rock auto and it didn’t work so I use my old key and used your method and I got it unlocked God bless you thank you so much if I was rich I’d give you money❤❤❤❤❤❤❤❤❤❤❤❤
Rather than disconnecting the battery, you can put the vehicle in reverse. Safety mechanism disables the starter while the vehicle is in gear.
Yea your right thank you ! Or also in drive!
How do you unlock the cylinder to move the shift lever? I'm sure there's a disconnect for that purpose but where is it?
Okay. Okay.. .. dude I love your accent or the way you say, okay.. all the time... it reminds me of growing up in l.a.
I had a jewish college teacher he would say ok,and yes alot! Lol i guess I picked it up from him!! He was a really good teacher lol
GM really messed up and I'm a fool. Battery dead.
My 05 Yukon has only one way in threw the driver's door key lock. But it was jambed and I was locked out. no passenger side key lock and no rear door key lock( nor a optional way to open from inside or to open window).
I had to bend door and a long steel bar to open power lock but the battery was dead. Sucks. Finally was able to click the manual lock.
Windows are power only with key on. Sucks. My kids can not roll windows down when I'm outside.
Center dome light drains battery overnight. Suddenly the Radio clock went to 12:00 every morning drained battery over a few days (since I only drive 2 times a week)
so I replaced the radio with a used radio but it was locked. Had to search radio unlock RUclips. Open radio removed tiny black chip. It worked but the door chime was 5 times louder. Cut the speaker tan wire to driver's door. Fixed that.
But next day the radio clock was at 12:00 again. RUclipsr said it's my ignition switch. Sucks. Ordered one off of eBay 20 bucks. Took me 4 hours to figure it out with a RUclips. Waiting to see WTH is going to happen next. GM sucks. Every Chevy van or truck I buy has these issues with alarms power locks power windows grounding wires ECM fail. Chevy vans were the worst for those problems.
Follow up: 18 hours later the battery is almost completely dead and I had the radio fuse unplugged and everything else was off. So it looks like I've got a parasitic draw somewhere in the vehicle and I will never find it so I have to unplug the battery every single night.
Man that sucks hopefully you find out the issue soon! Best of luck to you sir!
Mike, instead of disconnecting the battery shift the truck into Drive then turn the ignition to the on position without starting the truck 😎.
Great content bro!!!
Yess i agree brother your right!! Thank you!!!🙏🏼🙏🏼🙏🏼
yeah I really appreciate you man I followed your instructions everything worked out great thanks man
Glad you got it figured out ! Great job!
The best video about chevi ignición key cilindros. Thanks a lot. Very good video
Glad it helped
Hello Mykeys, is is possible on these Chevy's to Lishi the door lock, and then use a fill program to cut a test key for the ignition?
yes sir!!
im trying to this right now on the same truck. can you tell me why i need to have the battery connected at first to turn the key? my battery is disconnected. my key turns half way and then stops at the on position. it will not turn enough to press down the tab. do i have to connect the battery? i have also removed the 'key in' switch on top to let it turn. and i drilled out the side bar and removed it through the key hole.
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Excellent detail in his video great job and excellent camera shots thank you .
Thank you !
I guess they do not have a pass key chip in the key then.
This truck was half missing the tumblers i got it out but it starts and dies loosing the ignition or injectors. Fuel pump cycles on each time notices it also wont shut off when i turned dhe key back each time.
Im gonna assume the ignition switch itself is also partially broke..
Loved the video ty very much very good man to help so much.
Anything newer yes will require a immo chip !
Would this work on a 2001 chevy express? Keyway is B102- can I use Jiggler and a pick to depress side bar, or is like the old Chevy where u gotta remove wheel, lock plate spring ?
It should work for any double sided key ignition for chevy gm buik and caddilac.. just uses a different key .. have i sent you a pair of my jiggler keys?? For new and old style keys??
@@MYKEYSAUTOMOTIVE yea but i can't find them lol they are somewhere around here. I am actually watching your jiggler video now so Ill cut a b102 and b106 according to that video, thanks man
I do have a quick question? I have lost my key?? Will any key work to turn the tumbler to that click position ?? Or since I lost the key how do i over ride it to start my truck?? Im instaliing a transfer case motor and my truck is stuck in 4hi. The new transfer case motor instructions say that the 4wd must be in 2hi to i stall the part?? I have the drive shaft dropped and need to over ride snd manually shift it from 4lo to 2 2hi. But the truck has to be started?? Thank you for any advice you might be able to offer.
There is no over ride sorry no and not just any key will turn it..
Thank you for posting the video. . I’m 40 year mechanic and I have never done a lock cylinder replace without keys on a 2000 suburban. Another close to working similar Chevy key was my jiggler. It worked with the wrong key in there only to turn and remove and replace with new.Stiff mechanics wire and a close Chevy key worked . Without your video I would of had to drill it out, thank you man. Where do you eat lunch iI will set it up one day to send the place you eat 20$ to buy you a nice lunch. I am an hour north of NYC. God bless and thank you sir! You video was a big help!!!!
So you were able to get it out without the keys? Please explain how because I'm trying this in a 2001 jimmy and can't get the ignition out without the keys
@@trentjohnson6594 this video is showing you exactly how to remove it without the keys
Can you get a key switch out with the old key don’t forget it or do you have to have to get down down
Hello 👋🏽 for priority commenting please join our members only! From a laptop or desk next to the subscribe button!🙏🏼❤️❤️ thank you
How would you get the key cylinder out when stuck in the off position?
Thank you very much. This worked on my 00 Jimmy. You're a life saver!
Ps I used my friends Chevy Silverado key as the jiggle key.
Thanks again big dawg 😊
You're welcome!
Hi im working on 08 chevy Colorado all keys lost i decoded the door lock cylinder but the ign cylinder has 2 more bitings that i cand find out with my tool max maybe i do something wrong can you help please
How do you get the rest of the cylinder out when someone has tried to beat it out with a screwdriver? I bought a parts truck and I wanted to first try and start the engine before pulling it and second possibly use the steering column and replace the lock cylinder but I can't get it to turnover to replace the cylinder.
Drill it out
We busted out the ignition on a 97 Chevy truck tried to start it up you know it's screwdriver and it wants to start tries to start but acting like it's not getting any fuel and the fuel pumps engaging but not getting no fuel can you help us out
Sounds more like a mechanical issue.. its not key related.. that vehicle has no transponder.. whos truck is it?
Hey,I lost my keys to my 1998 Mazda millennia.can I drill out the cylinder and then the back pin to pop it out and if so can I then operate it with a screw driver?the ignition is on the dash.please help if u can.
Hello for priority commenting please join our members only! thank you!
Hello if u took out the drivers side door lock and put the number from the lock onto your key machine would it cut the key exactly as u cut from the initio?
Who carries the lock lube that you use? I just searched my key supplier and does not look like they have it nor did I see it on amazon.
I order them from americankeysupply.com!! Houdini
I will have to get set up with them
Thanks
Locks.ith just replaced my ignition lock. Chevy S10 1998, now it won't start. It starts but immediately turns off. Any thoughts or guidance please
Will probably need to synchronize new ignition cylinder to steering column 30min programming waiting process
Does the linkage to transmission need to be hooked up to unlock the steering wheel and egnition then to start it
Fantastic info mate watched all the videos on cylinder replacement ,they all said and pull it out with key in on position,well shit that was the fuckin problem i couldn’t turn it on to get it out!! then you popped up with your pick an jingle key ,all I had was a cheap little pick from the pound shop-dollar store in USA an it did the trick 😀thanks a million matey from Wales 🏴 Uk
☺️☺️glad i was able to help!
Same procedure with 2003 Chevy to retrieve a key code ?
Yes!!!
After I get the key pattern.. where can I take it locally to have a key made?
Hello greetings 👋🏽 friend! For priority commenting, join our member club! once you join, you'll also be entered to win our monthly giveaway! If you want to join you can join from a laptop or computer next to the subscribe button you will see the join button! Thank you! 🙏🏼❤️
I changed the ignition cylinder with new set of keys on 2000 escalade. Truck cranks but wont stay on
Might need synchronizing 30min waiting process
@MYKEYSAUTOMOTIVE tried it and no luck. 10 min 10 sec 3 times
Thank you for helping so many people
Thank you! God bless
El es el mejor explicanndo y no esconde nada,es el mero mero!
Amigo muchas gracias bendiciones!!🙏🏼🙏🏼🙏🏼
Do you happen to know how to get the black cap back on it doesn’t have that metal band and it’s flush, Also while removing the top housing I messed with something on the hazard lights which keep going. I can’t get it to stop. It’s my son’s car and I need to fix it.
Where can I find the key? I have a 1998 Chevy truck that I lost the key and need to replace the cylinder key switch
I have a 2001 Chevy suburban that someone tried to steal so the area where where you put the pic in at seem to have been hammered now the lock cylinder will not turn to take it out how do I get the lock cylinder out
Drill it out!! Aim for the side bar!
Same thing happened to me I’m trying to figure it out
Is it the same thing for a 2001 Chevy 1500? I bought the truck 3 days ago but it won’t start because the key won’t turn:/
yes it should be!
Hi thanks for your information where did you find the little pick tool that you use to put into the hole???
?
How do you remove an in dash ignition without the key on a Chevy Malibu ? Do you have a video on it? You are doing a amazing job on your channel
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Mate vehicle had one key. Vivaro van. Buttons were bad and remote not working. So programmed two new keys. Threw old in rubbish. All good. 6 weeks later one key not working unlock lock. Then day later second key stopped working. I was thinking it was autels fault. Or keys fault. But in truth as itd been happening before we turned up. It has to be something in the van. Immo maybe.
Whats your thoughts?
Faulty ecu ,faulty immo module.. something electrical
@@MYKEYSAUTOMOTIVE so how to find the fault?
Used a dodge key but this worked perfectly. Step for step
Is there any way to take the ignition switch cylinder out without a jiggle key?
Hey buddy where can I get the pick to press that side bar and the juggler key
Lock pick ebay
Great video,very helpful.. was wondering why you have to depress that lever with a pick if your using a jiggler key to turn the ignition? Is this absolutely neccessary or does it just make it easier or ? Is this a Chevy specific security feature of sorts? Do any other makes use this as well? I've gotten several ignitions to turn with my jigglers and have never done anything like you do with the pick, but they have also all been done on ford vehicles.. just lookin to learn.. thanks for taking the time to answer my questions..
Yes it makes it easier on these chevy/gm older models.. for the newer high security keys they have this ignition lock removal tool by locktech give those a look !! I just purchased some!!
@@MYKEYSAUTOMOTIVE
I'll check that out.. after I cut me a jiggler with a blank made for the blazer and depressed that I had the ignition turned over in about 2.5 seconds. it was a little too easy lol... I appreciate you making the video it helped me out a whole .. one more question if you dont mind.. is it possible to reinstall the lock cylinder without a working key? I tried to put mine back in before getting a key made and cant get it for the life of me.. I assume its because I dont have a real key in it just my jiggler... thanks
@@timmcgillvary9353 I believe its not possible to install it with out the key, since the sidebar only goes in when the key is in the lock cylinder and you need to kinda turn it while your installing it so it can sit in all the way.
@@MYKEYSAUTOMOTIVE
That's exactly what I was thinking... I appreciate your quick response and all your help. You must definitely have a new subscriber and I look forward to learning more from all your videos... Keep up the good work and excellent videos!!!! Have a great day. I'm off to have a key cut now..
Thank you brother welcome aboard!
Does a 98 chevy truck have a anti theft on it and can I replace the ignition switch with out a key
No anti theft
Is this same working and found the key Number ?
Xhorse 005L Machine ?
hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
Thank you for posting this video. I appreciate your effort!
Thank you!! Im glad you liked it!!
Thanks for your time!.. how did you open the vehicle? Just a wedge?Or do you pick the door?
The door was fairly easy..i used my lishi..... couldved found the bitting to the ignition with instacode ...but the ignition was once changed before ... so it wasnt the same depth cuts as the door... usually when they are non transponders i know the ignition lock cylinder has been replaced already..:(((
Thank you for watching!!!
Ok so went to a Citroen c3. Said immo fault. Tried testing immo with im608 pro and if said immo fault. Nothing else but could not delete. So i went to key relearn and it said success. Car still no start. Scanned and immo fault still there.
Customer said how car broke was the key came apart in his pocket. When reassembled car not opening and no start.
Did you try reading the key? Did you program a new key??
@@MYKEYSAUTOMOTIVE when i coded new key in then it started. So other key which was new but obviously had issues, we did nothing with it. Put it straight in the bin. Got to code another key in for the spare in couple days. Also got audi tt 2012 to do now. Picked that job up tonight
This video worked for me except when i push pin down to pull switch out but does not come out any reason why?
My man you saved me thank you thank you brother
No problem thank you and God bless you!
Keep up the good work .. I enjoy watching your videos there very informative and well made.
Thank you love your channel as well!! Take care stay blessed!!
Do you happen to have a video showing how to rekey a new one of these cylinders to match a original key?
I dont sorry
How did you remove the top black cover??
The steering column cover or the ignition lock cylinder gaurd??
If you didn't pull the lock could you have decoded the ignition lock with a lishi tool and cut the key with that? Thank you.
Hello 👋🏽 friend! Thanks for watching, please don't forget to become a member of our channel to prioritize your comments! Thank you 🙏🏼❤️
I have a 2003 Cadillac deville dhs I drilled out last cylinder now I’m stuck and how to proceed. Locksmith are to expensive someone please give me a recommendation thanks.
Hello Friend!👋🏽👋🏽Please join our members only group for priority commenting! You can join From a desktop or laptop next to the subscribe button you will see the subscribe button! Thank you!!❤️❤️🙏🏼🙏🏼
is the ignition the only place to find the key code?
For Chevy and Gm yes
Amazing video. Had a question once u take the ignition out do you have to use the same one u pull out and make a new key or can u just put a new replacement ignition and key ?
Ok well heres the the thing... i like to just decode and cut to the original ign. lock cylinder when its the same key as the door... so they dont use two keys to operate the door and ignition ... but yes,you can always use a new ignition lock cylinder... the only thing is that, you wont have the same key for the door and ignition.
How do you get a 2003 gmc Sierra ignition out without a key??
Watch my vid
How do you turn the ignition when it has been drilled out
I took one extra step because I had no pick and since truck wouldn't start, well. Any way I broke off the outer ring with the 4 notches that are proud of the ring. Then I was able to insert a small Allen key and pretty on the keeper bar and 30 second of Chevy jiggle later, it clicked over. Instead of disconnecting the battery you can just shift to drive once you have it clicked over and it won't try to start when trying to remove the cylinder.
Thank you for sharing!!🙏🏼🙏🏼❤️❤️
Oyes brother cuales son los codigos de esas llaves para deslaquear el lock cylinder para 07 para arriba y abajo de 2006
343434343434
What if the cylinder been changed out before. Those dont have the keycode on them and the waffers look different on those years without numbers stamped.
What site can I use to find my key code, I have the cylinder out?
What about the anti theft system? Could that not affect this
In some cases yes
Hey brother, u putting a lot of info 😂💪
Your videos are the best!! So thorough. Thank You. Subscribed and liked!
Thank you Eric glad you liked them!!
Do you sell the jiggler keys and the picks? I am in dire need of one for a 2001 GMC Sierra truck
Email me mykeysautomotive@gmail.com
Where can I buy that tool sir? The jiggling thing thank you !
Email me lilroxx001@yahoo.com
Ok my friend I go my S10 Chevrolet manual 1999 lost MH key need to take out the old one no got Thad key to do it what can do thank you video
Recommendation can u please leave a link to your previous jigger video
ruclips.net/video/b8mVfgYzfnw/видео.html gotcha!
what about a chip key? can the same procedure work AND bypass that?
Yes same procedure but you need to program the key .. watch 2007 silverado all keys lost on my channel!! Thank you
@@MYKEYSAUTOMOTIVE once you get the ignition removals in a new one installed that does not have a security code how do you disable the security so you can start your car
Melissa Middleton your vehicle actually has a chip!! Believe it or not its in there !! This this is the correct key!! Pk3 small head
www.carandtruckremotes.com/2006-pontiac-montana-ignition-key-b97.html?gclid=CjwKCAjw_Y_8BRBiEiwA5MCBJnY3J_lhJF7VwKOlL4dfVjbpX-2V1nHY-JAnKCVhMKG0Zta9H0e7jBoC1TYQAvD_BwE
Melissa Middleton you can try onboard programming but i don't guarantee it will work for you!! You start by turning to the on position but dont start car ..leave on for 10 min until light turns off then turn switch off for 5 secs then turn on (again but dont start vehicle).. for another 10 min... the off 5 sec than on again for another 10 minute
Can I just replace cylinder ? 2000 astro van,
Yes you can just replace the cylinder!
What is the meaning of 9279A?it's on the top of ignition.could we use that numbers as key code?thank you
Hello greetings 👋🏽 Friend! for priority commenting please join our members club! once you join you will also be entered to win for our monthly giveaway! If you want to join ,you can join from a laptop or computer next to the subscribe button you will see the join button!! thank you!🙏🏼❤️
Thank you , your videos are very informative..By any chance I have a 2016 street triple r and I want to clone and program a new key for the bike. I have the vvdi max pro. Does it work for bikes as well and do you have any videos on that issue ? 🙏thanks 👍🏼👍🏼👍🏼👍🏼👍🏼
Someone tried to steal my GMC and left what looks like a blocked key lock cylinder in it. How do I get that thing out?
Drill out the lock
hello friend! please make sure you join our members club for priority commenting! you can join from a desktop or laptop next to the subscribe button you will see the join button! thank you 🙏🏼🙏🏼❤️❤️
Question: once the vehicle was able to turn over/crank with the jiggler, can you drive it at that time? Or will car soon die (I’m a female, I don’t know but I’m trying to learn)?
where can I find a pick like you are using?
Uhs-hardware.com
Any VIDEOS on Chevy Ignition Repair
Coming soon my friend stay posted!! Thank you for watching!!
can the xhorse key cutting machine cut these type of keys?
Yes sir
where can I get the slide in pick took u used?
Nice job. Glad to see complete process beginning to end. Most leave steps out that leave you wondering
Thank you!! Glad you liked it!!!
Yes.To get the top off you just break it off !!! He didn't show that part,but you can see where the plastic stem is with the 4mm bolt head that you have to remove to get the top cover off.Hope he doesn't work on someone's newer vehicle. 😆
Definitely a smooth competent experience in the automotive lock industry
Great job !
Thanks
Scott Lucian
Hey mike, look looking at 08 Chevy Aveo for all keys lost, you think I can use this method to find the key code stamped on the ignition cylinder?
If the ignition is on the steering column yes ..if its on the dash no...👎
@@MYKEYSAUTOMOTIVE nice Awesome I'll find out when I get there. Any advice if it's in the dash? Just lishi it?
Thank you so much brother your a life saver and money saver
Brother thank you for watching!! Stay blessed!!
How can I get my ignition out if the lockwon't release when I push it grrrrr
Drill the baby out hit under the side bar
could i make a JIGGLER for an older GM?????
For priority commenting please joing our members only club!!
And this applies to a GMC Envoy too ?
If the switch is located on the steering rack yes!!😄😄hehe
Im lost please help is there any way i can get my 2001 jimmy ignition out without any keys