BOOST GAUGE INSTALL | How To! | 240SX
HTML-код
- Опубликовано: 6 сен 2024
- If you drive a boosted car, this is a must! Learn how to install a Boost gauge into your car.
In this video my car was running on 5cyl. So yes I know it sounds off.
Thanks for watching!
Instagram: @ThatBurgundy_240
FaceBook: / thatburgundy240
SnapChat: ThatBurgundy240
Twitter: / thatburgundy240
Music by: / ukiyoau
100% a qualified electrician after watching this (y)
Oh dude no doubt!! hahah
Im workin on a 91 prelude h22 swap. You just got me really motivated to finish my car. I started the beginning of the summer. I knew i wouldnt end up finishing it at the end because of money. But you just gotta take it one step at a time until you hit the last. But even then, there will be more stuff to do. Like fixing that ding on your hood lol.
This is the only video I’ve seen so far that has any mention of the boost pressure sensor. Glad I could finally see one used. Although I think I would rather leave the sensor in the engine bay and just run some small wires instead of a whole hose
I went with an Innovative vac/boost gauge. This was a nice clean install. Keep on playin' player!
Thanks dude Perfect timing i was going to install a boost guage today so now i got some ideas thanks Keep up the good videos !👍
Perfect! :D
I remember when TJ hunt had almost 30k subs man keep it up. You're gonna be huge soon
You were right
Man, your car is just flawless - well, almost flawless, gotta get that dent out of your hood! I daily a 1999 BMW e46 m3, but I have a project 1jz s13 240sx that is so close to being complete! Seeing your car come all this way inspired me to take my 240 to another level and it has really paid off! Keep up the good work!
Oh no, I made a mistake, my bimmer is a model from 2000.
Almost 30k subs wow, i remember seeing you on Ricer Miata and you had like 2k subs lol
thats how i found his channel lol that video
+Manny Peña same with me.
BoostedSupra RSP yeah a long time ago
same
Good looking gauges man! I went with Spek-Pro gauges in my skyline. It was between them and AEM. keep up the good work man!
Thanks! Yeah dude love your set up as well!
THanks for the guide! I'm just trying to fix my lights on my gauges because they starting to dim out.
Want that sound when you have the ignition on! :')
Great video bud!
Thanks for this video. Helps me to figure out what I'll do on my '05 Subaru Legacy GT.
if you tap the intake manifold the vacuum sencer gives you a better reading I had one of these on my eg lsvtec and it was great. so was the wide band
I drive a 1992 Volvo 940 2.3L Turbo. Runs stock about 5 psi boost, gonna install a boost controller and gauge. Should be able handle around 15 psi after. Cheers.
Do a wideband install, can't find a good quality video
Clean 240 man I'm boosting my grs in my Crx this winter can't wait for summer!
very simple and your explanation was straight forward
Car sounds sick dude.
Mine's a 2.3l stroker - 2g awd DSM.
thanks for the vid. watching is better then reading
+MrKlink951 Glad I could help
that red cf looks pretty good in there.
That was really easy, I installed a mechanical one and omg lol it was a lot of work
Car is so clean man
Thanks bro
Thanks man 👌🏼 I’m new to this whole F.I. thang. Rb20det s30 🤘🏽🤘🏽
I have megasquirt on my miata. So does the boost gauge wire up to the megasquirt? And I have a manual boost controller I’ve yet to install. Or is the wiring to the ECU only for electronic boost control?
Once you sort out your fuelling system ie injectors and pump. You will most defiantly suffer from a spark/blow out at top end due to stock and laggy coil packs. Splitfire coil packs will defiantly help and improve your ignition timing. Beware you will defiantly feel the gains especially the snap oversteer as I learned the hard way wrapping my rb25det skyline round a tree.😔
Ive already done a LS2 truck coil swap!
sorry for u man
Dude you’re car is so cool
ive got some of those glow shift gauges as well digital boost gauge for my mazdaspeed3
i drive a 1988 isuzu i mark gotten it to run 13psi with a turbo off a subie. obviously manual boost controller on it. trying to hook up a boost gauge and my new blow off valve but isnt working out too good
that is one sweeeeeet 240sx
You deserve more subs bro
We will get there!! But thanks man!
What do you prefer between the glow shift and the aem ?
ur 240sx sounds good and ur boost gauge is not easy install good job and byway when u get ur new injectors for RB20 ?
Always good stuff man!
Appreciate it dood!
Nice vid! I drive a 1996 Evo 4, love the car!
Thats awesome man!! And thank you!
i have a 2001 subaru forester stainless exaust boost with vf 34 ball bearing a little up graded turbo. i need to put the air ratio and oil pressure gauges.
thanks so much for the video loved it! and I drive a 2002 bugeye wrx! love it to death!
so you didn't use blue and white?
Wow sounds healthy. Nice car..
Nearly 30k subs dude 😧
ITS AWESOME
Super helpful
Thanks bro! (: installing this on my JDM import 2001 TOYOTA CALDINA GTT ST215 AWD WAGON (3sgte engine same as the turbo mr2 and celica gt4)
About how much money would you say you spent on your 240
Do I have to do a front mount intercooler for this because I have rubber hose piping
Nah!! Just make a hole somewhere in that rubber piping, just make sure it's sealed!!
Reset the Boost gauge bring some benefit to the car ?
Noticed you haven't installed the gktech fan yet are you at least running electrics?
No one wondering about the 10-15 psi at idle? Is it correct?
how'd you get your cluster to work almost done with my swap and need to set my idle i think its too high lol did you use a dohc tac or rb20 tac?
Dude ur a genius
I drive an 02 supercharged mustang and I would liked to add a boost gauge one day. I hope i can do it on my own, this video should help. Ps. Are you going to fix the hole/dent you did on your hood?
Cool! You should be able to no problem! Im sure i will eventually!
awesome video man!
Thanks!!
are you going to keep the stock seats? amazing car cleanest 240 ever man
Nah will upgrade eventually! Appreciate it!!
I drive an old wodden ship.
Also known as a volvo 940
Love the vids man keep it up !
Thanks man!!
Cheach out my crx on my channel.
i did this on my saab 9000, but i did not have to have that sensor that conects to the car harness
What brand gauge did you install?
+Kalvin Malli (ThatBurgundy240) i got an aem gauge to, but its an older analog one
DR:Snaggens That would be why!
you didn't wire contant? just power and ground huh.
Did you remove your air tube behind the the gauges or leave it? I will be running heat still and worried about cooking the wires or gauges.
Your heater won’t come close to harming the wiring. Unless you have a wood stove in your car.
But I think mine is still there. I did have to remove some stuff. Don’t remember now. Been a while.
Thanks man! I wasn't sure how close the tube was cause I know it can pump out some good heat. Good to know, though. I appreciate the reply!
I found a 240 for 3500 and it hasnt been modded. Should I grab it? A older person has owned it and kept it in his garage.
Reply
get it dude, the worst opportunity is a wasted one, 240s only come around so often, my friend got one and hes been skiding ever since, definitely worth the cash, you wanna go fast and look cool the 240 is the way to go.
Joseph Rodriguez thanks bro!
Update needed!
I am getting -18 to 24 reading!!! i spliced the brake booster line and added T fitting there! what is the problem?
Supercharger not a turbo
saw that the suede wrapped center console is already lifting that kinda sucks
Ill hit it with some super glue and it will last forever!
subbed bcs we both got 240s ;)
I'm getting a 300zx in a month
Where’s the pressure sensor connect too
your car is fucking beautiful.
Thanks my dude!
Do you prefer electronic or mechanical boost gauges?
Electronic for me!
is this car still running?
Hey man, how is your gauge pod secure to your center vent?
+corolfo I just made it so it's super snug!
How do u make a hole to plug into the intake manifold
most intake manifolds will have at least one vacuum nipple. on the rb25det there are multiple nipples under the manifold including one for the stock boost reading
magnetic0314 haha nipple
Splice connector would work better 🤔
Thank you for not making a 20+ minute video and trying to milk revenue.
00:44 - TWSS
1:07 - TWSS
2:25 -TWSS
2:45- TWSS
I tapped into my cig lighter myself.
Do you live in PA? I swear I saw ur car today lol
for any car ?
man your RB sounds evil! got cams?
Nahh he had an injector problem, it's running on five cylinders.😂
+John Doe haha!sounds good tho :P I guess an RB in any state sounds good
+Simon Bowen haha true
"I already had one so I'll just pop this line on there" best how-to lol
i drive a 1987 nissan 300zx
and how install for the fuel ratio gauge
Same
Process power, ground run o2 sensor to exhaust done
I got a 1999 Nissan frontier
Nice car
whats the song that starts at 8 seconds
Brandon Reisch still dre
niceeee videoo
300zx TT bro
1jz land rover defender
dat inline 5 life
200sx S13
As you can see guy
Suh dude
Was Uh
I drive a 93 180sx with a sr20det
I drive a 1994 Mazda Miata.
i drive a 96 r33 skyline with a rb25det series 2
+Nissan Skyline R33 do you have Instagram
+xxTomahawkxXxGamingx brad._.official
@r33brah_
I bought a 240 yesterday, it threw a rod today...😑🔫
Dude noo. Is it a SR?
+Kalvin Malli (ThatBurgundy240) no just a normal ka
+Kenny B was gonna swap it anyway but guess that's happening a lot sooner now
+Kenny B I had a a couple different ideas for swaps right now 2jz,1jz,Cummins,350 chevy
+Kenny B rb26 bruh
I sent a dm to you on instagram, it's Speedy_Gonzalez88❤
Stock 240s don't exist
newjersey.craigslist.org/cto/6174266556.html
A Person Hahahaha It's an auto though :/
Mine was stock lol was
4th like😂