@@WrenchedOutGarage I was going to order the spoiler but mine has a camera mounted on it. Its for the wide angle view. I have a 2019 ZL1 with regular spoiler.
Which height spoiler did you install? The 6 1/4" or the 4 3/4" ? It looks great on the car. I really like your before and after pics, it gives a good result comparison. A close up 360 would be nice to see. The spoiler has a lot of curvaceous lines that aren't easily seen in a video and a slow close up would be great. Good job sir.👍 Thanks
Love the vid just installed my zl1 spoiler. Only problem I have is with the middle top bolt, I’m having trouble fully tightening it. This is because my current wrenches are getting blocked by my third brake light. What type of terminal or regular ratchet did you use? The bolts for my spoiler are 10mm.
What about adding silicone caulk just around the holes to protect the metal of the trunk? Is that just overkill? I've seen other guys trunk paint bubbling where it is mounted.
can the spoiler be removable whatever time you want or once it is installed, it's nonremovable, i mean remove it when you are racing and put it back later
That’s a great question, check out the install directions www.c7carbon.com/2016up-camaro-zl1-1le-style-rear-wing-gloss-black-p-682?zenid=d55c85830a4d375c5cdefae35cdb6208 And if needed ask C7Carbon they are pretty good with any questions like that.
Well the answer is yes and you can do whatever you want to. However, this is designed for the 6th gen which will create a need to customizing the mounts.
Did you happen to pop the truck and see the there are caps over the factory holes under the blade spoiler ? If not then you would have to cut them or have a shop do it for you.
You still liking it? I'm thinking about getting the carbon one myself, i see allot of other companies make you epoxie the side winglets, these seem to come over piece
I was able to fit it on 2014 chev Camaro Ls and it looks so beautiful 😍
NO MORE REVERSE CAMERA?
You mean, this c7 carbon zle wing comes in 1 piece? Most wing comes in 6 pc. Thanks
Nice video! I would love to see installation of smart active wing in the future!
Outstanding video. Very Informative
Thank you
@@WrenchedOutGarage I was going to order the spoiler but mine has a camera mounted on it. Its for the wide angle view. I have a 2019 ZL1 with regular spoiler.
Which height spoiler did you install?
The 6 1/4" or the 4 3/4" ?
It looks great on the car. I really like your before and after pics, it gives a good result comparison. A close up 360 would be nice to see. The spoiler has a lot of curvaceous lines that aren't easily seen in a video and a slow close up would be great.
Good job sir.👍
Thanks
Thanks Michael, this is the 4 3/4 height.
@@WrenchedOutGarage Thanks Anthony. I'm thinking seriously about getting one after seeing your video.
They have a heck of a deal on them right now.
@@michael-ev5fk i just bought mine the short version look super
ss camaro Super cool! I want one too
Gooooood video bro thanks
Looks badass bro👊👊
Thanks man
Nice video man 👍🏼
Well made, well explained.
Thanks Chad
Love the vid just installed my zl1 spoiler. Only problem I have is with the middle top bolt, I’m having trouble fully tightening it. This is because my current wrenches are getting blocked by my third brake light. What type of terminal or regular ratchet did you use? The bolts for my spoiler are 10mm.
Good lookin badass car🏆
Thanks Eduardo
I didnt see new glue pads put down. Kinda just bolted it to the decklid looked like.
I wanna put it on my CT5 V 😅
This is nice but I need one with a back up camera
What about adding silicone caulk just around the holes to protect the metal of the trunk? Is that just overkill? I've seen other guys trunk paint bubbling where it is mounted.
Hi Raymond, you could definitely do that if you chose to.
Do you think this slows down the car around the 100 mark? I've heard that it slows the car down because of the way the wing is looking.
Would this fit on the convertible and allow the top to function properly
Kasto,
Great question I would contact C7 carbon for the answer to that.
Will that for a 2017 LT v6?
I would check the c7carbon website for fitment
which one matches the OEM height? thanks
so which one?
Will this fit the SS 1LE predilled holes
I believe it will as long as it has the six
Can I use this for my 2017 rs?
Yes
Hello can you by any chance tell me the adhesion remover you used? I cannot get the old gasket off.
Who else sells the shorter version other than c7?
ACS composite and Chevy
Did you notice a difference in mpg due to increased drag?
No difference
You dont buy a ZL1 and worry about mpg!!!! You pay a gas guzzler tax because of mpg
How long did it take you to receive your zl1 wing? I heard they take a pretty long time to ship it out?
Around 6 weeks .. they are made and not just sitting on the shelf
5 days
Do you know if I need a reinforced deck lid to put this on my 16 SS?
You shouldn’t
can the spoiler be removable whatever time you want or once it is installed, it's nonremovable, i mean remove it when you are racing and put it back later
You could however you would have to dismount and re install it .... through the trunk lid . More work then what’s it worth
@@WrenchedOutGarage cuz with the spoiler it would be very hard to reach the top speed
Hey would this fit the convertible or does it get in the way of the top going down
That’s a great question, check out the install directions
www.c7carbon.com/2016up-camaro-zl1-1le-style-rear-wing-gloss-black-p-682?zenid=d55c85830a4d375c5cdefae35cdb6208
And if needed ask C7Carbon they are pretty good with any questions like that.
Is the carbon option genuine carbon or fake?
what tool did you use to get those white/plastic pins to release.
Can I install this on a 5th gen camaro?
Well the answer is yes and you can do whatever you want to. However, this is designed for the 6th gen which will create a need to customizing the mounts.
Which heigh kit matches oem ?
Hello Jose,
The one that is in the video is the shorter of the two available sizes from C7 Carbon
Wrenched Out Garage so the one in the video is the one that matches oem height or is the taller option the oem height
The taller options appears to be the height as the shorter one is a couple inches taller then the stock SS full wing spoiler
Anthony after a year would you still go with the C7 ? has it held up ?
Can this go on a 1LT 2016 convertible?
Hi did you ever get an answer and/or did you you change your OEM spoiler? Thanks.
@@JasonJolo98 it can but I wouldn’t recommend. Wing works best with 8 cylinders 🍚
Do you have it for the ss 1le? I currently have the blade spoiler
Did you happen to pop the truck and see the there are caps over the factory holes under the blade spoiler ? If not then you would have to cut them or have a shop do it for you.
@@WrenchedOutGarage yes there are caps but they are different from yours.
@@camarojay7027 did you end up getting one?
@@JoeyBurnsRed no but i want one. But everyone keeps telling me that the holes are different on the ss 1le
@@camarojay7027 damn i might get a 1le lol wanted to know
I’m planning to buy the wing myself, but I have the 2019 Camaro 2SS (the one with the RearCamera). Is there a specific wing for that?
Yes there is
I buy one is cheap stuff ,, Is not worth the money
Extremeonlinestore.com has one for 450.00 but it's matte black with the camera option.
You still liking it? I'm thinking about getting the carbon one myself, i see allot of other companies make you epoxie the side winglets, these seem to come over piece
I do still like it a lot. Carbon Fiber or satin black would be the way to go.
I do think I should have broken went with either other option
@@WrenchedOutGarage thanks bud!!
did it come with adhesive or tape already on it ? im about to order one and i do not wanna go through the hassle of puttin that stuff on
Tape where ?
on the bottom of the spoiler where you put the spoiler in the holes? like how the factory spoiler had all that sticky adhesive
Would this fit on a base model 2017 Camaro LT? I have no spoiler installed on my 2017 Camaro LT. I wanted to make sure this would fit, any idea?
Have you figured it out? I’m liking into one for my 2017 LT V6.