Hi brother. Your videos are awesome. You deserve much more recognition than this. Please don't stop making videos and your hard work will pay off. Also I encourage all viewers to share the video and subscribe. Good luck ♥️
Nice job! I have a question - If I don't have a weak signal (2/4 lines, 35-50ms ping), but have like 1mbps and at midnight 2.5-10mbps, will this work in the middle of the day, where the bandwidth is used and I have 0.6-1.2mbps and boost my speed to at least 4mbps?
Yeah. It may be possible using larger antenna. Tower usage must be high at daytime in your area. I'm sure you can get more than 1mbps placing antenna on roof like mine.
Great brother..so i need to know what is the measurement for Hutch.( The copper wire bending length, )pl reply me soon. Because im going to make it...thanks
You have to make a repeater. One antenna at outside of house and another one at indoor. also there are electronic filters to reduce unwanted interferences.
How long from the cell Tour......? It is MIMO antenna......? Without Router or modem is it possible....? Can u provide me best signal booster without sim slot.....?
Yes. Magnetic fields do generate over current conducting cable. It could interfere with your signals going through antenna cables. It is better to wire them few inches away.
@@AmateursDIY I think both have different frequencies , so they won't interfere, I am using the same modem you use , also bought a directional external antenna from Tamilnaduonlinestore.com
If you placed antenna on your roof make sure to keep those cables away from your domestic wiring. If lighting strikes on your antenna your domestic wiring also can be destroyed.
Yes they have different frequencies . In my country power supplied by 50Hz ac electricity. Usually wireless internet are in GHz range. but they could interfere and your signal noise can be increased.
I am having troubles with the cable specifically the 75ohm rg6 cable the cable itself is being used as an antenna. I guess the shielding is not sufficient. May I ask for your opinion???
Yeah. Shielding also could be a problem. How long is that cable. Don't use longer lengths because signal loss is high. Try using a 50ohm cable if you can find it.
@@AmateursDIY the rg6 cable is around 4m long but I cut it to around 6cm(with the biquad antenna not attached) and it received a signal keep in mind that the cable still has insulation so I think the shielding is not enough, any thoughts?
Sorry friend. I don't have much knowledge on these things. There is a subreddit called amateur radios in Reddit. They must have a answer for your problem.
Very Good and all the best. Some suggestions: 1) Use some "soft" background music. I think you can improve your tone and the way you say it. I mean louder, slower, and clear.
Too many people drag videos with slow talk. This isn’t an appropriate video for music. People don’t have a radio on when they go to class to learn. I watch so many of these to learn and this was the first one that got straight to the point. This is what people like. Stay you my friend.
it depends on the frequency you are going to reach. Because low frequency waves travel longer distance than high frequency signals. My router frequency is 2300mhz and distance between tower and my antenna is 5km
Bro, in the modem menu I don't have the option of antenna (my modem is huwt b310s I think it's the sams like yours, is there any method to bypass the configuration of the antenna please)
@@AmateursDIY yes, the formware is different, I tried to upgrade it but that doesn't work, and I think without this option in the firmware it couldn't detect the antenna ??
How fucking sad is it that im 20k north of the capital city in australia and im watching some indian fella who lives in butt fuck no where teach me how to make an antenna so I can get more than 1 bar mobile reception and browse the internet at a reasonable speed because I have no fixed line internet and the mobile is near useless. Thank you random indian fella - absolute legend - god among men.
hardware wala ne godak durata..50ohm ganne high frequency signal yawanna. Tv walata adu frequency eva use wenne. Cctv karana samahara aya gawa thiyenava athi. Kelani cable ayageth thiyenava website eke
Where you live is a beautiful place, I tried to make an antenna using other method but it didn't worked, I wanted to use it directly over mobile phone, can you help with that?
Thank you. What do mean by other method? Is it yagi antenna. I have no experience in using this for mobile phone. But some people use yagi antenna as outdoor unit because it has higher gain and omni directional antenna for indoor unit. Some commercial products has amplifier in between them. But you can try without a amplifier. I saw someone put an instructable on instructables.com without using amplifier.
Copying will not work for you. In my country this may be work because mobile 4g broadband supplied by 1800mhz. But 4g home broadband will not work cause it is using 2300mhz
How about a yagi antenna. They are not that big for 700mhz and has high gain compare to biquad. But they can't catch reflected signals better than biquad. you need to know which direction your signal tower at.
@@AmateursDIY is this method solve my problem ? in day slow speed , at night after 2:00 am I get a high speed at same point same device same test !!! Why ?? Please help me I have full 4G/3G signal but slow speed waiting you friend
LKR 101.57 20%OFF | 1pce Adapter SMA / RP-SMA to SMA / RPSMA Male Plug & Female Jack Straight & Right angle RF Coaxial connector a.aliexpress.com/_mtwu5LB Meken koi connector ekada oni ☝️(select karanna tiyenwa)
Mn ekak haduwa slt ekata hari giye na bro. Hadapu widihe awlk wenna athi neda? Normal signal kanu 2k wage thynwa. Mn use kare earth wire athule thyna copper kambi & wire eka widihata use kare cctv walata gnna wire..
Matanam therenne ne machan. Man ehema channel kiyala ekak danne ne router eke. Oya group eke ahala balanna danna kenek kiyai. facebook.com/groups/1161157027368542/?ref=share
issella mona Band ekada use wenne kiyala hoyaganna ona. Eka ithin samahara isp la eyalage website eke dala thiyenava samahara aya dala ne. Eka hoyagaththama wikipedia eke thiyenaba LTE frequency thiyena page ekak google karama hambei. Eke adala band eka balanna ethana thiyenava uplink downlink walata ada frequency ehema. Eke aduma value eka thiyena eka ganna. Samahara aya aduma ekei wedima ekei average aranuth hadanava. Mamanam oya hadala thiyenne aduma frequency eka dala. Lankabell dialog wala band 40 kiyanne 2300mhz ma thama
There is a link to dimension calculater in video description. You can use that to find dimensions for 850MHz. But for that low frequency antenna size could be very large.
![YoungBoy Never Broke Again - Missing Everything [Official Video]](http://i.ytimg.com/vi/dTYeMZGzOzw/mqdefault.jpg)
Tested and gain a one extra signal level. It worked for me. Thanks
Hi brother. Your videos are awesome. You deserve much more recognition than this. Please don't stop making videos and your hard work will pay off. Also I encourage all viewers to share the video and subscribe. Good luck ♥️
Thank you brother ❤
1:55 it is very brilliant. I can use that, thanks :)
Useful stuffs bro! Watched the whole video!!
Proud of you brother.
Thanks
I'm From Sri Lanka too. Good stuff. How can I contact you?
මාත් හැදුවා.. නියමයි.. බඩු වැඩ.. 😍😍😍
පට්ට👌
ඔයා ඇන්ටනා 2ක් හැදුවද නැත්තං එක්කින්ද වැඩ කරන්නේ
@@sldanuwa8718 එකයි
@@sldanuwa8718 එකක් ඇති බඩු හොදයි
@@slmalsara Thanks මචන්
this made my life easier.. thanks for the video...🖤🖤
Did you try this dear??
This is great. you should try electro plating a metal to avoid corrosion.
Great. Which metal should be good for plating?
You could have explain with diagram of connect with slow video..
For network reception test why don't you check the RSRP, RSRQ & SINR decibels and show us the gain?
I don't know anything about those😅 finally only matters to me is speed and ping
ඇන්ටෙනාව වැඩ කරනව මචං 👌👌..
මේක වැස්සට තෙමුනාට අවුලක් නැද්ද ? පාස්සන තැන් වලට එහෙම වතුර ගියාට අවුලක් නැද්ද?
මටනම් අවුලක් වුනෙ නෑ වැස්සට තෙමුනට. කෝකටත් ඒව වෝටර්පෲෆ් කරානම් හොඳයි. ට්‍රාන්ස්ෆෝමර්ස් වල ගාන වැක්ස් එකක් එහෙම තියෙනව නේද ඒ වගේ එකක් ගාන්න තියෙන්නෙ.
මේ ඇන්ටනා එකේ මිනුම් ගන්න ලින්ක් එක එවනවද
Description එකේ තියෙනවනෙ
Nice job! I have a question - If I don't have a weak signal (2/4 lines, 35-50ms ping), but have like 1mbps and at midnight 2.5-10mbps, will this work in the middle of the day, where the bandwidth is used and I have 0.6-1.2mbps and boost my speed to at least 4mbps?
Yeah. It may be possible using larger antenna. Tower usage must be high at daytime in your area. I'm sure you can get more than 1mbps placing antenna on roof like mine.
I've similar problem
Thanks for amazing video . Please could make video on 4G Signal booster !
Great brother..so i need to know what is the measurement for Hutch.( The copper wire bending length, )pl reply me soon. Because im going to make it...thanks
Mobile 4G FDD list
4G LTE FDD Dialog 1800Mhz B3
4G LTE FDD Mobitel 1800Mhz; B3
4G LTE FDD Hutch 900Mhz ; B8 and 1800Mhz B3
Home Broadband 4G TDD
4G LTE TDD Dialog 2300Mhz B40
4G LTE TDD SLT 2600Mhz; B38
4G LTE TDD Lanka Bell 2300Mhz; B40
41301 Mobitel
41302 Dialog
41303 Etisalat
41304 Lankabell
41305 Airtel
41308 Hutch
41309 Hutch
41311 Dialog
41312 SLT
41313 Lankabell
උපුටා ගැනීමකි
looks like they are using 2 bands. you can check that by installing an app such as network cell info lite
Love your style…. Accent is so cool. I understand you perfectly but it sounds like another language at the same time. So unique.
Bro can we use old dish wire ? . And one more question is the space between antenna and reflector important ?
yes it needs to be 1/4 the wavelength
Very well built!
can we use this without router? i mean how can we use this for smartphone signal strength?
You have to make a repeater. One antenna at outside of house and another one at indoor. also there are electronic filters to reduce unwanted interferences.
Video eka supiri... Bro mm bell4g ekak pawichchi karanne. Eke frequency eka dannawada?
Thanks
Band 40 2300mhz machan
@@AmateursDIY thank you bro👍👍👍
Great Job!! Thanks for the Video.
It is good because it is true.
This gets all frecuencies??? like 700 800 hz AND the higher ones like 2000-2400?
I think so. But not both ranges at once.
aahy bro ill check it out btw do you have the high ping thing going on in bell4g?? its been going for over a week or something
Sorry bro. I have stopped using bell4g because i got a better offer from mobitel.
@@AmateursDIY oh is thats so hm i might change too bell4g is really slow 😁 thanks anyways bro
How long from the cell Tour......?
It is MIMO antenna......?
Without Router or modem is it possible....?
Can u provide me best signal booster without sim slot.....?
Hi , Does electric current interfer with this antenna cable as my 4g antenna cable comes with same wiring of AC Current wire
Yes. Magnetic fields do generate over current conducting cable. It could interfere with your signals going through antenna cables. It is better to wire them few inches away.
@@AmateursDIY I think both have different frequencies , so they won't interfere, I am using the same modem you use , also bought a directional external antenna from Tamilnaduonlinestore.com
If you placed antenna on your roof make sure to keep those cables away from your domestic wiring. If lighting strikes on your antenna your domestic wiring also can be destroyed.
Yes they have different frequencies . In my country power supplied by 50Hz ac electricity. Usually wireless internet are in GHz range. but they could interfere and your signal noise can be increased.
Great video. I'm subscribing
Thanks you.
I am having troubles with the cable specifically the 75ohm rg6 cable the cable itself is being used as an antenna. I guess the shielding is not sufficient. May I ask for your opinion???
Yeah. Shielding also could be a problem. How long is that cable. Don't use longer lengths because signal loss is high. Try using a 50ohm cable if you can find it.
@@AmateursDIY the rg6 cable is around 4m long but I cut it to around 6cm(with the biquad antenna not attached) and it received a signal keep in mind that the cable still has insulation so I think the shielding is not enough, any thoughts?
Sorry friend. I don't have much knowledge on these things. There is a subreddit called amateur radios in Reddit. They must have a answer for your problem.
Simplest solutions are genius ones )) ps.what determine those wire rectangles? ie size, number ?
Size depends on frequency. Not sure about numbers. May be increasing rectangles will make antenna more directional.
Very useful bro thanks
ill try this thank you
Thank u🙏🏻
Sir apne konsa rautor use kiya h or modal number kya and usme sim dalti h kya
ISP is a sri lankan company.
I will make one of these . Thank you for the video. Subscribing
Thank you
this is awesome 💛
Thanks
Very Good and all the best. Some suggestions: 1) Use some "soft" background music. I think you can improve your tone and the way you say it. I mean louder, slower, and clear.
I will try to do next one better than this. Recently i got a new boya mic. Thanks for your suggestions.
@@AmateursDIY The current one is very good for a start. Good luck.
I disagree. It’s unique and more interesting to listen to him.
Too many people drag videos with slow talk. This isn’t an appropriate video for music. People don’t have a radio on when they go to class to learn. I watch so many of these to learn and this was the first one that got straight to the point. This is what people like. Stay you my friend.
Nice demonstration ............
- Hello. What is the maximum distance this antenna will work under normal conditions?
it depends on the frequency you are going to reach. Because low frequency waves travel longer distance than high frequency signals. My router frequency is 2300mhz and distance between tower and my antenna is 5km
Very useful bro.
Thanks
Nice work bro!
How to contact you?
dialog 4G strength eka wedi karaganna, Double BiQuad Antenna Calculator ekata 2300Mhz dunnama ena wire length ekai wire area ekai set wena wire eka mokadda machan???
Oya ahanne nawanna ganna kambiye gauge ekada? Eka wenas wunata loku avulak ne. Mama dala thuyenne antenna wire ekama sudda karala aragena.
Bro, in the modem menu I don't have the option of antenna (my modem is huwt b310s I think it's the sams like yours, is there any method to bypass the configuration of the antenna please)
May be your firmware is different. No idea about bypassing. But they must be in auto mode so i don't think you have any issue.
@@AmateursDIY yes, the formware is different, I tried to upgrade it but that doesn't work, and I think without this option in the firmware it couldn't detect the antenna ??
Not sure. It may automatically detect by router.
@@AmateursDIY I tried an antenna that I bought and It's not detected by the router, Is it possible to not connect the coaxial cable ?
try adding 1.2k ohms resistor 1/4 watts
Where should i place them? Is it parallel to antenna wire?
@@AmateursDIY Yes. It will improve the SINR.
Sir rautor m sim h kya or konsi sim use ki h apne or modal number kya h
bro i have a old cable that used in my local cable setobox is it usable how do i know is this 50 ohm or not
That must be marked on the cable. I don't know what is 'setobox' you mentioned
Hi... What is the maximum distance can do this?
maybe 8, 10 km in direct line of sight of tower.
antenna wire connected each other or not
No both wires should be separated
Hi
Will this work for 5g signal
Nice work bro 👍
What's the model of the module/router?
Machan mobitel 4g router ake frequency eka keeyda ..?
4G nam 1800mhz
3g frequency ekanam danne mama. Router ekanam 3gth support karanava mama hithanne b310s 927 eka
Great work🤘
How fucking sad is it that im 20k north of the capital city in australia and im watching some indian fella who lives in butt fuck no where teach me how to make an antenna so I can get more than 1 bar mobile reception and browse the internet at a reasonable speed because I have no fixed line internet and the mobile is near useless.
Thank you random indian fella - absolute legend - god among men.
I'm from sri lanka😁
@@AmateursDIY Bro thats like saying Tasmania is not part of Australia.. either way thank you for making an epic video
You are welcome
Mn mobitel 4g connection ekkin interenet ynne routere tplink archer mr 200, frequancy ek 1800hz ned
Mobitel 4g 1800thama
can we use 3c2v cable ? or what type of cables can we use?
Mamath 3c2v demme. Hebei wediya digata danna epa. Hodama wade 50ohm cable dana eka. Signal loss eka adui
@@AmateursDIY 50ohm cable ganna puluwan kohenda?
Hardware wala 50ohm cable kiwwata danne na ne...
3c2v 10m ho ita Adu digak awlk nadda?
hardware wala ne godak durata..50ohm ganne high frequency signal yawanna. Tv walata adu frequency eva use wenne. Cctv karana samahara aya gawa thiyenava athi. Kelani cable ayageth thiyenava website eke
Very useful ♥️
whether the fiber cable connects to the reflector?
Fiber?
Outer wire connected to reflector
@@AmateursDIY Yes, thank you. I am from Indonesia
Where you live is a beautiful place, I tried to make an antenna using other method but it didn't worked, I wanted to use it directly over mobile phone, can you help with that?
Thank you.
What do mean by other method? Is it yagi antenna. I have no experience in using this for mobile phone. But some people use yagi antenna as outdoor unit because it has higher gain and omni directional antenna for indoor unit. Some commercial products has amplifier in between them. But you can try without a amplifier. I saw someone put an instructable on instructables.com without using amplifier.
@@AmateursDIY I used this method but there was no change in network strength ruclips.net/video/bHWrRG_kdn8/видео.html
@@pankajrawatindia Antenna in that video is suitable for 1800mhz. Is that the same frequency your network provider use?
@@AmateursDIY I am not a technical person , I just tried to copy the video, I'm just a layman
Copying will not work for you. In my country this may be work because mobile 4g broadband supplied by 1800mhz. But 4g home broadband will not work cause it is using 2300mhz
Perfect
dear friend if i want to make a bi-quad antenna for my router 700Mhz-2700Mhz what frequency put in the calculator. thanks
700mhz. Antenna size decrease with frequency . But 700mhz biquad antenna is huge.
@@AmateursDIY if I use 1800Mhz bi-quad antenna it is possible to also for 700Mhz and 2700Mhz.
No. If you use 1800mhz antenna you can only recieve signals above 1800mhz. What is the frequency your network provider use to transmit.
@@AmateursDIY we have frequencies here 700Mhz, 1800Mhz & 2600Mhz. i don't know which is better reception.
How about a yagi antenna. They are not that big for 700mhz and has high gain compare to biquad. But they can't catch reflected signals better than biquad. you need to know which direction your signal tower at.
Patta
Good job bro🤩❤️
Get full 4G signal but slow data connection?
Signal towers must be at full load. That happens in my area too
@@AmateursDIY is this method solve my problem ?
in day slow speed , at night after 2:00 am I get a high speed at same point same device same test !!!
Why ??
Please help me
I have full 4G/3G signal but slow speed
waiting you friend
There might be huge daytime network traffic in your area. I think only your isp can give a solution for that. Using a larger antenna may help a bit.
I have double routor antena.
If I made 2 antena🙄?
Connection will be more stable
Router එකට වෙන හානිය මොකක්ද atenna use krddi ehem wenne ai 😢
nice work 👍
Thank you
Machan Dialog 4g router ake frequency eka keeyda bn..?
2300MHz band 40 මචන්
@@AmateursDIY 1800 neweida? google karama enne 1800 machn
E mobile broadband
Weldone bro
Thanks
Super
Ara lankabell porn ekta ena outdoor antenawa connect kaloth hariyaida...aulkata thiyenne eke ara pin eka tikk lokui.(pin eka kiwe ,ara rauter ekta antenna eka set karaddin karakawana thaba kella.ekta kiyna nama danne).e porn ekta ena eka lokui..rauter ekta hariyana e kellk dala ,rauter ekta set kaloth hariyaida????
Lankabell phone eke frequency eka adu athi. Eva hariyanne ne godak durata.
SMA Male connector .
@@AmateursDIY thanks.
Mobitel 4g frequency eka mokakda ? ( mobitel frequency 2k tiyenwa neda )
B311As-853 router ekata meka support da?
Mobitel 4G 1800mhz. Den 4G+ කියල එකකිනුත් දෙනවලු ඒකෙනම් දන්නෙ නෑ තැන් කීපෙක විතරලු තියෙන්නෙ.
Ow ඔය රවුටරේට සපෝට්.
850mhz mokkda?
3g ho 2g wenna athi.
LKR 101.57 20%OFF | 1pce Adapter SMA / RP-SMA to SMA / RPSMA Male Plug & Female Jack Straight & Right angle RF Coaxial connector
a.aliexpress.com/_mtwu5LB
Meken koi connector ekada oni ☝️(select karanna tiyenwa)
Eka oyage router eke hetiyata wenas wenava. Huawei b310 ekatath ona SMA Male kiyana eka. Okatath ehema wenna athi.
mka phone data walata use krnda puluwannda
Phone ekata hai karanna widiyak nene
Mn ekak haduwa slt ekata hari giye na bro. Hadapu widihe awlk wenna athi neda? Normal signal kanu 2k wage thynwa. Mn use kare earth wire athule thyna copper kambi & wire eka widihata use kare cctv walata gnna wire..
Antenna cable wage wire ekakda? Signal kanu dekakthiyenavanam අනිවාර්යයෙන්ම වැඩ කරන්න ඕන
Antena cable ekk wage thama. Cctv camera eke indan dvr ekata yana ewa.. Matath hitha gnna ba awla mokkda kiyala. 😞
Router eka mokadda
Huawei B310s-925 ekk
Settings wala antenna settings wala external antenna kiyala dala balannako. හැබැයි auto දාල තියෙනවනම් ඔයාගෙ ඇන්ටෙනා එක වැඩනම් රවුටරෙන් එතන පෙන්නනව එක්ස්ටර්නල් ඇන්ටෙනා එක ගන්නව කියල වැඩ නැත්තම් buitin කියල පෙන්නවන.
Brother which router are you using ? I have Huawei 4g Router 2s B312-926 and I wanted to know if this will work for here.
Huawei b310s 925 . It should work for every router
How to apply mobile phone.. as a router
ඒ කීවෙ? ෆෝන් එකට සිග්නල් ගන්නද? ෆෝන් වලට ඉතින් රිපීටර් තමා දාන්න වෙන්නෙ
Will it work for jiofi???
Its not brand dependent.
thanks mcn. mg router eka 2.4g bandwith ek thiynne. eeke channels godk thiyenawane. kohomd hari frequence eka thoragnne?
mg channel 13k thiyenawa frequncy 2412-2472 wenkn. mokkd thoragnna hoda?
Channel kiwe mokadda machan? Man ehema ekak genanam danne ne.
2.4G kiyanne wifi eke frequency ekane.
Oyage service provider kavuda?
Amateur's DIY dialog
oo. band ekt 2.4G thiynwa. eeth iit ytin frequency eke select krnn denawa. auto option ekai channel 13kui. channel 1-2412 , channel 2- 2417 , channel 3- 2422 , ..............,channel 12-2467 , channel 13-2472 dialog eke ara sluthin dena podi router ek thiynne
Matanam therenne ne machan. Man ehema channel kiyala ekak danne ne router eke. Oya group eke ahala balanna danna kenek kiyai.
facebook.com/groups/1161157027368542/?ref=share
2.4Gkiyanne wifi eke bandwidth ekane. Dialog ekenan 2300mhz
Amateur's DIY ela mcn. ethkota 2300ya heduwanm hari neda?
Thada thadaaa
👏👏👏
Wow. Don't you try to make this as a product?
Actually hat would be great. I'm considering that also
Machan antenna ekata set karana connector eka mokakda
SMA male
Antenna side ekanam Batapola antenna wala thiyena connector ekak. Electrical badu kadawala thiyenava
thanks 🤘
👌
router ekata set karana connectors koheda bn ganna thiyenne ?
oken router eka haraha nathuwa kelinma phone ekata signal ganna widhihak nadda ?
Phone ekata ganna widiyaknam ne. Kotuwe kadayak thiyenavalu owa thiyena. Hariyatama danne ne mamath. Mama aliexpress eken genave.
@@AmateursDIY man dialog router eka paavichchi karanne. signal kanu 1k witharai uparima thiyenne (-111dBm withara) ; eekath unstable. wahina welaawata signal poddakwath na, disconnect wenawa.
me antenna eken tikak hari signal strength ekee wardhanayak balaaporoththu wenna puluwanda ?
මගෙ ලංකබෙල් තිබ්බෙ. ඒකටත් වහලෙ උඩට ඔය වීඩියො එකේ වගේ ස්පීඩ් තිබ්බෙ. ඇන්ටෙනාව හින්ද නෝමලු 10mbps ආව මටනම්. මම දන්න අය කීප දෙනෙකුත් හදල සාර්තකයි කිව.
@@AmateursDIY කම්බි වල ඝනකම ටිකක් වෙනස් උනාට අවුලක් නැද්ද බං ?
Avulak ne. Mama hadapu eveth ganakama wenas
How much bdi?
oya gaththu SMA connector eke link eka daanawada Ali express eke
LKR 210.21 5%OFF | 1pce Connector SMA male plug crimp RG5 RG6 5D-FB LMR300 cable straight
a.aliexpress.com/_mN0XW3X
@@AmateursDIY oayage phone number eka denna puluwanda ?
Sorry no.
mcn slt b310s eke frequency eka kiyad
Band 38 wenna ona. 2600mhz. Aduma frequency eka 2570 wage.
Machan eka kohomada hariyatama hoyaganne . Saralawa poddak kiyala dennako
issella mona Band ekada use wenne kiyala hoyaganna ona. Eka ithin samahara isp la eyalage website eke dala thiyenava samahara aya dala ne. Eka hoyagaththama wikipedia eke thiyenaba LTE frequency thiyena page ekak google karama hambei. Eke adala band eka balanna ethana thiyenava uplink downlink walata ada frequency ehema. Eke aduma value eka thiyena eka ganna. Samahara aya aduma ekei wedima ekei average aranuth hadanava. Mamanam oya hadala thiyenne aduma frequency eka dala. Lankabell dialog wala band 40 kiyanne 2300mhz ma thama
Ela thanks
Malli router eka paththata gahana conector ela lankawe ganna pukuwanda. Gana kiyada
Kotuwe thiyenavalu kiyala dala thiyenava mama dekka 4g router fb group eke
පලවෙනි හරස් වීදියෙ ටිකක් ඇතුලට ගියාම දකුණු පැත්තෙ පොඩි කඩේක තියෙනවා 150යි එකක්
පලවෙනි හන්දිය පහු කරන්න ඔනද?
👍👍👌👌
👍👍👍👌👌👌
Dialog ZLT p28 eke frequency ek kiyd ayye ara router eke system settings eke anterna kiyla ekk pennanne ne
Dialog nam 2300mhz, Oya router eke settingsnam mama danne ne. Hebei default aththe external antenna ekak gahala thibboth ela ganna wenna athi.
Ayye router eke ek anterna ekkt withrd ghnne ethkot signal enwd system settings hdnn bene router eke
Samahara wita ona nethi wei default gani external antenna eka. Eka antenna ekakata gahapuwama athi. Antenna dekak hai karath kamak ne. Eth ekak athi godak welawata.
Ayye ethkot ara ana wate kambiyak yawanne ekt mwge ekkd gnn one awashya ganakamak thiyenwd nettn home wiring wire wala kambiyak athid
Home wiring kambiyak wunath kamak ne.
Wow
How to connect it to router?
Using external antenna ports
OMG dont turn on subtitles !
Mobitel eke frequency kiyada
1800 4g
ZLT P28 eke frequency ek kiyd
Dialog da?
Ayye 45ohm cable awulak nadda
Hondai
@@AmateursDIY thanks
Slt router ekata meka hariyanawada frend.
Ow hariyanna ona adala frequency eka base karan heduwoth.
@@AmateursDIY slt operating frequency kiyada frend
Band 38 wenna ona. Wikipedia eke balanna eke athi band 38 wala frequency eka
Please give me 850 frequency design
There is a link to dimension calculater in video description. You can use that to find dimensions for 850MHz. But for that low frequency antenna size could be very large.
Thank you
I watched the whole video until i saw a corrosion in the wire. Better use aluminum
Yeah you are write. But aluminum is hard to solder right ?
Kollo sinhala reply ok da?
kiyanna
@@AmateursDIY meke signal frequency eka hya gnne khomda?
mokadda network eka
@@AmateursDIY dialog 😑
Home broadband router nam 2300mhz
Oya videos sinhalen giyanam api wage unuth goda..aduma tharame sinhala subtitle wath thibbanm Oita wrdiya kattiya balai kiyla hothanwa mta
Subtitles දාල තියෙන්නෙ. On කරගන්න පුලුවන්
@@AmateursDIY sorry...thankz