KO MOTOR SUR RON FACTORY SPEC HILL CLIMB

Поделиться
HTML-код
  • Опубликовано: 17 окт 2024
  • First ride on the new Ko Moto Factory Spec kit!
    830 phase 400 line right out of the box with a bit of tune. Only going to get better.
    🎵@Joeyburn: Loaf
    🎥@borttheafrican

Комментарии • 8

  • @eastwood111
    @eastwood111 Год назад

    Wish I could see the video in real time.

    • @goodridehawaii
      @goodridehawaii  Год назад

      Appreciate you bro! Yea once the rain lets up the hill will be in much better condition. I’ll session the beast for some good footy. Even the gas bikes haven’t cleaned it. It’s a crazy climb in person. 🤙🏼

  • @xm.milanmila2621
    @xm.milanmila2621 Год назад +1

    POROVNANÍ SE SKLADOVÝM MOTOREM BY BYLO VÍCE VYPOVÍDAJÍCÍ

    • @goodridehawaii
      @goodridehawaii  Год назад

      I don’t have any previous footy of hillclimbs on the BAC 8000 and stock motor. (That combo is more than capable). But I do have strava data I take from a flat track near the house I tune at that may even reflect a BAC 4000. The Ko is the factory kit so more kv than stock. My best time was beat on a test ride on nearly a flat tire. I’ll post up! Appreciate the comment!

    • @MotoAlias
      @MotoAlias Год назад +1

      Surronster put on the ko combo and his bike was slower than before when he had the stock motor and the bac4000

    • @goodridehawaii
      @goodridehawaii  Год назад

      @@MotoAlias yea I’m confused by Surronster results. His motor is the pro version so it’s similar rpm and kv to stock. The KO should have been huge improvement!? I have the spec motor has 1000 more rpm. It’s huge difference from stock. But you can see from my lap times, it only shaves seconds off a lap. But top speed is also higher. Other take away from the lap times is BAC 4000,8000 had the stock motor maxed on rpm. So both BAC can achieve max result from stock motor.

    • @brandonyanez6113
      @brandonyanez6113 Год назад

      @@MotoAlias because Surronster doesn’t know anything about bikes when it comes to sprocket and wheel size. He thought he’d don80 mph with a 14 in wheel and big sprocket 😂

    • @MotoAlias
      @MotoAlias Год назад

      @@brandonyanez6113 or how about your dumb. The bikes wheels and sprockets didn't change. What he changed was the motor and controller to a ko setup and it was slower afterwards. Period