Ford 2006 - U0155 lost communication with instrument panel cluster (IPC) control module repair
HTML-код
- Опубликовано: 21 июн 2016
- Ford engine fault code U0155 • ford focus lx 2006 Ins...
Common fault with ford 06 instrument panel cluster, this was probably due to lead being removed from solder in 2006. The solder of 2006 mainly had issues enduring (thermo-)mechanical stresses. Over time this causes the joint to fail. To repair a fractured solder joint, re-flow the solder with a re-flowing oven or a soldering iron.
There are a couple of other RUclips videos out there on other ford 2006 instrument panel fixes but here is one i seen prior to me taking my cousins instrument panel out • Ford Focus Mk2 Instrum...
Fixed the instrument panel the same way last weekend. No more 4-dash problem. Thanks for inspiration!
This is exactly what I need to do but I’m a total novice as far as soldering is concerned ... you make it look so easy...
The song made me not skip forward in the video to the actual repair LOL nice work
Resolder the mains chip pins is also a good idea along with power supply ic's on the board.Good job!!
Thanks the video!!!!
what the name/model of the green led bhind the green lcd screen? some one know??
you have great soldering skills, well done.
No way I could do as well as that.
If anyone thinks they can solder like this as a total amateur then they had better do a lot of practice before they go near the cluster.
mayo sham thanks, it actually took me about 4 hours in total maybe 5 cos I had to go over the board twice it didn't work on my first test. With a bit of practice you can solder anything really, just take your time, have a good work bench, have a good iron tip, always keep it clean and hot I kept mine at around 400c(the iron is now broke but lasted three years). I also use lead solder, It's just easier to work with.
I love eletrical work and have actually resoldered my IPC in my Ford Windstar. I am curious if you have any insight on type and gauge solder to use? Are you using solder without a rosin core? And thats why you dipping it each time?
shut up, soldering is not rocket science, and this board has lots of room to work.
What would happen if I just got another ipc from a junk yard? Would it plug in and work?
Dobra robota 👍
good job
my ford fista (cluster) right indicoter light and fule light on after few minuets when car off and key out of ignition ..
hello, do you need to remove all indicators from the front side? It seems that the PCB is on the back side only.
Andrej Kvasnica well I did it to remove the risk of me damaging them when working on the board.
Adam Karakurt now I can see the needles comes from the board so it's needed for sure. Nice work anyway and shame on Ford for this widespread bug of post-2005 instrument panel. Stupid non-lead solder...
Hi Adam and mamny thanks for the video>
I wonder if you can help find the type of smd regulator for ford escape (maverick) 2006 3Lt
instrument cluster 5L8T-10849-AL
Thank you a lot ...Peter
Petros Marinis sorry I wouldn't be able to help at all with that.
Do the resoldring in SMD crystal only for U0155 error code , full PCB re soldring not required
Where is the crystal on the board?
does it need i reprogramming by ford in order to do this
No cos ur only touching up the solder joints. Ur not actually changing anything.
What temp do you use on your iron?
Was a long time ago but it's going to be different depending on your iron and the type of solder ur using. I probably had it up at 300+C but u gotta just see what settings are best for you, do a few practice joint to see what settings feel best.
hot enough to melt solder duhhhhhh
Ford focus 2008 2.0L code défaut trouvé dans U1900
:)
How do I clear the old engine fault codes?
ELM327 cost 3euro
My f250 diesel 2015 U0155
sabas7007 it's probably a different issue, as this was due to a failure in the solder which was rectified soon after 2005 (roughly). might be worth you disconnecting the battery, then unplug and replug the instrument panel. I don't even know how you should do that in a 2015 model or even if the error code means the same thing.
Sabas - how did you solve this? My 2015 f150 just got the code too.
Very difficult =(
Very easy
Biggest waste of tie I have ever seen. Even done at normal speed, without commintary, it did not tell me a thing.
If you have that error code copying this video will likely fix it. Is that confusing?
would rather have you explain then the annoying music
Nothing to explain its just a re-soldering touch up job, check the description
It amazes me how many people do these and make videos on youtube but yet never use flux when resoldering. It would never work for me because I know better.
I was using flux the whole video it's just fast forwarded, plus the solder I use has flux in it as well. It's necessary really when trying to get a clean joint.
most electronice solder has flux built in.......really you didnt know that?????? duhhhhhh
😅
Чё так медленно надо было побыстрее видео крутить ,а то не хрена не понятно
Asalımı Bayrakları
Not very useful without talking and detailed explanations.
It's quite straightforward with a text description
Bakwaas
For God's sake slow down!!
That music is atrocious... 🤮