DIY Grease Trap | DIY Petz
HTML-код
- Опубликовано: 29 янв 2021
- Support is much appreciated please click here: bit.ly/3D25NwK
How to make a grease trap for your homes.
A grease trap is a plumbing device designed to intercept most greases and solids before they enter a wastewater disposal system. Common wastewater contains small amounts of oils which enter into septic tanks and treatment facilities to form a floating scum layer.
Every household must have device.
Action Cam used for this video: AKASO V50 Pro
Lazada link : invol.co/cl3cwv9
Please Subscribe: / @rollypetz
#DIYPetz #RollyPetz - Хобби
Here's the link for the grease trap update.
ruclips.net/video/pYscu8vuUvg/видео.html
Thanks.
❤Great job except one mistake you created a restriction of grease flow by inserting flex hose inside of blue drain instead of outside of blue drain line. Get a larger flex hose to go over the blue drainage pipe leaving the sink and have inlet the same size as blue drainage pipe to avoid restricting grease flow. A Cardinal Rule…….Never insert piping inside another that is larger than the ID of the existing pipe. You could fudge on this installation “IF” it was water waste only. But for Sewage or Grease it will only create back flow of waste defeating the purpose of eliminating grease from entering the plumbing system. Besides the one error great job!
Hi Sir thats a very keen onsevation and thanks for that. So far this has serve its purpose, I'll do that once this one needs upgrade or replacement. Stay safe Sir..thanks again.
Thank you for sharing.
You're welcome.
Thanks for your share
You're welcome Sir.
Wonderful...thank you
You're welcome and stay safe.
this dude is smart
Thank you for tour comment Sir.
Good job🥰👍👍👍
Thank you 🤗
Best grease trap theme song eveeeerrrrr
Thank you for your comment Sir.
@@RollyPetz seriously though, this helped me figure out how to build the trap for my off grid home
@@randombanana358 thanks a lot Sir, really appreciate that. hoping for your success.
Grabeng views na
Thanks a lot Sir Jethro.
DIY master Petz
Thanks Boss Jether...
kinahanglan ko ani ehehe
Sayun rana buhaton Brad, kaya ra kaayu nimo. Daghang Salamat sa pag share.
If that drain system didn't run level for such a long way along your wall you'd have better flow but that long level pipe means you'll see grease blockage a lot faster. Not that a grease trap isn't a good thing, it is but your drain pipe has more problems than just grease clogging it.
Thanks for your observation Sir. Anyway the drain pipe has an inclined step to about a certain degree. Yes this has been my problem before I installed the grease trap.
materials
Plastic Container with cap
Bulk head fitting adapter
Pvc Threaded Adapter(Male)
PVC Pipe elbows and fittings
Thanks Sir..
pano kung mas mrming tubig? edi npuno n ung orocan?? sana may sample ng grease o mantika.. hehehe
Salamat po sa comment Sir. Replied on your other comment po.
Bos ano twag dyn s bilog n my rubber gasket?
Good pm po Sir. Bulk head fitting po Sir.
@@RollyPetz thank you
bakit magpapakahirap wag mo buhusan ng sebo at mantika lababo lagay mo sa garapon tapon mo sa bakante lote
Thanks Sir.
the little hole in the bottom is for drainage when cleaning?
Yes, it is used as drain when cleaning the grease trap. This is optional as need basis depending on where you place the grease trap.
@@RollyPetz so when you clean you open the drain and wash all the solids thru it? and how you clean the floating grease?
or may i ask what is the method to clean it without unpluging the whole container an wash it
@@benr4469 you can watch this update Sir Ben.
ruclips.net/video/pYscu8vuUvg/видео.html.
Tnx.
@@RollyPetz tnx very much
Does it smell?
Yes it does smell since its grease and oil but if the cover is on then it would'nt smell. Tnx and stay safe.