I just inherited this machine from my mother in law. She rarely used it. I oiled it really well. Didn't think to remove the table. Quiet, Smooth, great stitches
Yes you're right, it's a good machine once you apply little oil the machine becomes smooth and good for long time ⌛️ ⏲️ 😀 Thank you so much and all the best 👌 👍
@@WorldRandomVideos I should note that this is my 10th machine. She has two more I may inherit, and old Elna and Beaumont. I have a 57 Necchi Supernova , Union Deluxe, 2 - Elna Quilting pro, Newer basic Singer, Husqvarna, Phaff, and a singer toy hand crank. They breed like rabbits.
Thank you for this! I just picked up a BrotherVX780 with a manual from an estate sale. I am having a hard time understanding how to thread, oil, and thread the bobbin! HELPPPPPPPPPP please lol I appreciate it in advance.!
Hello my friend, to oil the machine simply watch this video shows you how to add oil and lubricant, use sewing machine oil, if you don't have use multi purposes oil, if the machine is not spinning fast its kind of slow spinning use DW40 spray on all mechanical movements inside the sewing machine, remove the top and side cover just like in my video and spray dw40 this will help the machine to maximum performance after spray dw40 add little drops of sewing machine oil or all purpose oil that will keep smooth spinning, To thread the sewing machine or to thread or wind the bobbin see this website with user manual show you how to do that. Here's the link Thank you and all the best 👌 👍 www.manualslib.com/products/Brother-Vx800-5952565.html
Great Idea , LED light bulb is much better than yellow light. I should buy some led light bulbs and replace the yellow ones. Thank you and all the best 👌 👍.
This is so helpful. Thank you for your careful explanations. I have been able to get my machine going. I will watch your feed dogg issues video. Is that the one you mention at the end when the stitches are not turning out well?
Thank you so much for your wonderful comment and great support 🙏🙏🙏, I will add that video link here and all the best ❤️ ❤️ ruclips.net/video/9DKXECCAIBk/видео.htmlsi=-ddvgbP6tNRbxqiW
I didn’t really notice a difference in the noise from your before and after video. The reason why you have stitch problems is because you have not wound the bobbin properly - you need to pass the thread around the small flat spring on top before you wind it. If the bobbin winder is properly threaded then you will have a tightly wound bobbin and the stitches will form properly
Hello my friend, it's hard to tell the difference but it's little better and smoother after, yes you are right I wind the bobbin as you mentioned, Thank you so much for your great information and wonderful comment and watching 👀, and all the best 👌 👍
Por favor tudo bem suas explicações são ótimas sabe essa caixinha do lado da bobina a minha máquina está sem ela eu não sei onde encontrar quando eu jogo na internet não entra dessa
Hello, thank you so much, I really appreciate you ❤️, I also looked online unfortunately nothing found, extension table or box, here's a website selling them but not available anymore, maybe the best is to make your own if you have 3d printer machine, www.discountsewingmachineparts.com/all-part-types/extension-tables
I thought that you had to thread the needle from front to back and not from back to front as you have shown towards the end of your video as per the diagram on the instruction book. Or does not that make a difference?
Hello my friend, yes, you're right, I probably did it wrong way but without my intention, sometimes works though but better to follow the user manual, thank you and all the best 👌 👍.
Hello my friend, please try the following steps 1- some machines have on the back of the teeth a bottun you need to press and move it to left or right to raise the teeth 2- if your machine does not have it you need to remove the teeth plate cover look for a small little gear or a piece of metal with screw you can adjust it move it to left the teeth up, I hope that can help you to figure out thank you and all the best 🙏💗🙏🙏💗
Hi! I have a similar brother VX807, but it doesn't make continues stiches (sometimes makes the loop with the thread on the bobbin and sometimes don't but both threads continue to come out together), do you know what I can do to repair it?
Hello my friend, there are several causes for that, try thise troubleshooting steps Is the fabric feeder (feed dog) is moving correctly if yes try those steps if no you need to go to step 4 . 1- replace the needle it may solve the problem, there are some numbers for needles and some are universal try to use small needle or recommend one first If didn't work go to 2 2- replace the threads also try to use skinny thin threads must be same threads on bobbin, color doesn't matter. If didn't work go to 3 3- check thread Tensioner make sure on right position sometimes thread is tight ilor loose sewing machine doesn't stitches good, Also check the bobbin thread Tensioner three is small screw on the bobbin case to adjust it, if doesn't work go to 4 4- if all didn't work you need deassemble remove the Covers and check for any loose parts or springs or screws, check feed dog make sure os moving correctly, if all good the last thing you need to do is timing this is not easy to fix you need to be patient and it may take several times to get right every sewing machine has timing all moves must be set at same time needle moves up and down bobbin housing rotation left and right If the needle loose or not moving at same tome or little high or low you need to make adjustments by loose the bolt and make sure the needle line up with bobbin housing when rotate, please watch my videos here's the link for more details I hope that can help you to solve the problem, Thank you and all the best ruclips.net/video/9DKXECCAIBk/видео.html
Hola. Tengo una duda. Mi maquina es una Brother vx810. Y se me salio una tuerca de la parte donde está la lámpara , pero no sé de dónde es. Y la aguja pega con el prensatela cuando baja aunque está en M , la posición de la aguja 🪡. Creo que nduve tocando algun tornillo. Pero no logro arreglarlo
Hello my friend, the lamp is located on the left side of the machine above the needle, you need to open it so you can replace it, about the needle try the following, Before you do any troubleshooting make sure the needle is on the right place , 1- check the presser foot maybe it's not the correct one for your machine 2- check if the presser foot holder is not loosed or spring is loosed or missing any parts Hope that can solvevthe problem And all the best
Thanks for the wonderful video. I have a VX 880, whose reverse stitch is acting free and the feed dogs are taking the fabric towards the front instead of backwards. I can see a detached reverse stitch spring inside but have no idea where to hook it on the lower shaft. Please help. SARA from Pakistan
Good Day Sara, there are several causes for this issue, it's so hard for me to tell you what is reason exactly and how to fix it without checking the machine and troubleshooting step by step, however here are some tips and steps you can do might help help you to find out the problem and fix it, One possible explanation may be the gears are shifting wrong position or wearing out or not sitting right, or the sewing machine needs alignment or calibration, other causes maybe some machanical parts are loose or maybe some dirt or fabric or something stuck inside the machanical movements. You need to remove the plastic cover and take a close look. Fabric is not feeding properly Follow the instructions below if your machine is not feeding properly: 1. Your feed dogs may be lowered. - Check the position of the feed dogs and raise them if necessary. 2. Your stitch length may be set on 0. - Lengthen the stitch length between 2 & 3 on your machine. 3. Check the needle. - Make sure that your needle is not bent or blunt. - Make sure that your needle was inserted properly. 4. Make sure you are using the correct combination of needle, thread and fabric. 5. Your thread may be tangled. - Remove your bobbin cover and needle plate and remove tangled thread. 6. Check the hand wheel to be easy to turn in the clockwise direction. - If the hand wheel is hard to turn: do not force the hand wheel to turn, you may cause further damage to the machine. 7. Check that the bobbin winder shaft is pushed over to the left. 8. Make sure that the presser foot you are using is appropriate for the type of stitch that is selected. 9. If the model of the machine uses a darning plate, make sure that it is not fitted on the needle plate or remove it if necessary. Please let me know how it goes? This is a link of user manual you may need too www.manualslib.com/products/Brother-Vx800-5952565.html Please let me know whether you figure out or not, I may send you a video Thank you and all the best 🙏😊
@@WorldRandomVideos HI, this is Sara here. I am giving my input to your suggestions yesterday. As regards the shifting if gears etc and alignment issues, I am not in a position to check these. But, there is most likely nothing wrong with them because the machine was running alright except for some off and on thread tension issues. This reverse mode problem has come up after I opened the machine and attempted to clean it with a long stemmed nylon brush. I havd checked to make sure the stitch length is not set to zero, the feed dogs are not lowered. At present, I have removed the needle and presser foot to see the direction of the feed dogs movement. Thank you for the link to the manual. If you can please share your email, I will send you the picture showing the reverse stitch spring so that you can guide me as to what is the correct place to hook it. Thanks and Regards
Hi Sara, Sure, that's a good idea please send me some photos or a short video if it's possible, at least I can have an idea what could possibly cause the issue, Here's my Gmail, thank you and all the best. aliyusef1973@gmail.com
Would the same principle apply to the Brother VX808 ? I manage to find one for a steal at the 2nd hand shop, but it's super noisy like the before on this video
Hello my friend, yes you're right all sewing machines either old or new, all types and brands all share the same principles which is mechanical movements, Lubricant is so important because it makes the sewing machines run smoothly and quietly, All the best 👍
Hello, there's no adjustment to lower or raise the dog feed, the big dial from 0 to 4 For press back and forward sewing and numbers for stitching distance and speed, however if you want to do manually you can raise dog feed by remove the 2 screws holding dog feed and add Washers to raise it see the video from 18:00 to 18:30 thank you and all the best 👍
@@WorldRandomVideos Hi there, would that be the 2 black screws adjacent to each other in the timestamped part? Would it effect the machine in any adverse way using washers, i.e. will they have otherwise normal movement for example? Really appreciate any help, i am a novice
Hi The Elastic Belt of my VX810 is loose, i didn't get how you said we could fix it Sometimes the hand wheel doesn't rotate when i step on the pedal unless i rotate it with my hand first
Hello my friend, some of the sewing machines have adjustable belt bolt so you can adjust tighten or loosen the belt, it's located under the motor inside the sewing machine so you have to remove sewing machine covers to adjust the belt, I don't remember if this type of sewing machine has adjustable belt bolt or it's fixed on, if it's adjustable it's so easy to tight the belt by loosing the bolt and tight the belt and tight the bolt, if it's not adjustable and it's fixed on you need to check the belt if it's wearing out or too old and it's too loose then time to replace it, thank you so much and all the best 🙏
I just inherited this machine from my mother in law. She rarely used it. I oiled it really well. Didn't think to remove the table. Quiet, Smooth, great stitches
Yes you're right, it's a good machine once you apply little oil the machine becomes smooth and good for long time ⌛️ ⏲️ 😀
Thank you so much and all the best 👌 👍
@@WorldRandomVideos I should note that this is my 10th machine. She has two more I may inherit, and old Elna and Beaumont. I have a 57 Necchi Supernova , Union Deluxe, 2 - Elna Quilting pro, Newer basic Singer, Husqvarna, Phaff, and a singer toy hand crank. They breed like rabbits.
Of course, good to know know that, besides not all new machine better than vintage ones, do you collect sewing machine? , Best regards ✨️
I inherited most of them. Can't throw them away. I try to find new homes for the them
Thank you. It's amazing what a little oil can do. Now my machine is so quiet. Before I oiled it I could not even turn the wheel. Now it turns easily.
Very nice, thank you so much and all the best 👌 👍 😍
Good evening, my friend. 🤗💕 Awesome upload. 💯👍 See you. 😘💖
Hello my friend, many many thanks 😊, we really appreciate your beautiful comments and wonderful supports 😊 😀 thank you so much 💓 😊 😀 and best regards.
Omg.....literally...thanks so much ❤
My pleasure, thank you and all the best.
Thank you for this! I just picked up a BrotherVX780 with a manual from an estate sale. I am having a hard time understanding how to thread, oil, and thread the bobbin! HELPPPPPPPPPP please lol I appreciate it in advance.!
Hello my friend, to oil the machine simply watch this video shows you how to add oil and lubricant, use sewing machine oil, if you don't have use multi purposes oil, if the machine is not spinning fast its kind of slow spinning use DW40 spray on all mechanical movements inside the sewing machine, remove the top and side cover just like in my video and spray dw40 this will help the machine to maximum performance after spray dw40 add little drops of sewing machine oil or all purpose oil that will keep smooth spinning,
To thread the sewing machine or to thread or wind the bobbin see this website with user manual show you how to do that. Here's the link
Thank you and all the best 👌 👍
www.manualslib.com/products/Brother-Vx800-5952565.html
We have a similar Jones sewing machine v860 and I changed the bulb to an led bub which gives more light and keeps everything cool to touch.
Great Idea , LED light bulb is much better than yellow light. I should buy some led light bulbs and replace the yellow ones. Thank you and all the best 👌 👍.
Oh, baby, this is great job ☺🤗💪
Many Many thanks 😊 thank you so much really appreciate your beautiful comments and wonderful supports ❤, thank you so much 💓 😊 ☺
This is so helpful. Thank you for your careful explanations. I have been able to get my machine going. I will watch your feed dogg issues video. Is that the one you mention at the end when the stitches are not turning out well?
Thank you so much for your wonderful comment and great support 🙏🙏🙏, I will add that video link here and all the best ❤️ ❤️ ruclips.net/video/9DKXECCAIBk/видео.htmlsi=-ddvgbP6tNRbxqiW
I didn’t really notice a difference in the noise from your before and after video. The reason why you have stitch problems is because you have not wound the bobbin properly - you need to pass the thread around the small flat spring on top before you wind it. If the bobbin winder is properly threaded then you will have a tightly wound bobbin and the stitches will form properly
Hello my friend, it's hard to tell the difference but it's little better and smoother after, yes you are right I wind the bobbin as you mentioned,
Thank you so much for your great information and wonderful comment and watching 👀, and all the best 👌 👍
Omg thank you
My pleasure 😊 Thank you and all the best
Much like my Dx 950except for the led screen
Yes, I think the led screen are bad and sometimes they burned out,
Thank you and all the best 👌 👍
Por favor tudo bem suas explicações são ótimas sabe essa caixinha do lado da bobina a minha máquina está sem ela eu não sei onde encontrar quando eu jogo na internet não entra dessa
Hello, thank you so much, I really appreciate you ❤️, I also looked online unfortunately nothing found, extension table or box, here's a website selling them but not available anymore, maybe the best is to make your own if you have 3d printer machine, www.discountsewingmachineparts.com/all-part-types/extension-tables
Good job
Thank you so much 👌 💓 😊
And all the best
I thought that you had to thread the needle from front to back and not from back to front as you have shown towards the end of your video as per the diagram on the instruction book. Or does not that make a difference?
Hello my friend, yes, you're right, I probably did it wrong way but without my intention, sometimes works though but better to follow the user manual, thank you and all the best 👌 👍.
Hola me podría ayudar ? Cómo puedo subir los dientes de mi máquina es una brother vx 808 gracias
Hello my friend, please try the following steps
1- some machines have on the back of the teeth a bottun you need to press and move it to left or right to raise the teeth
2- if your machine does not have it you need to remove the teeth plate cover look for a small little gear or a piece of metal with screw you can adjust it move it to left the teeth up,
I hope that can help you to figure out thank you and all the best 🙏💗🙏🙏💗
Hi! I have a similar brother VX807, but it doesn't make continues stiches (sometimes makes the loop with the thread on the bobbin and sometimes don't but both threads continue to come out together), do you know what I can do to repair it?
Hello my friend, there are several causes for that, try thise troubleshooting steps
Is the fabric feeder (feed dog) is moving correctly if yes try those steps if no you need to go to step 4 .
1- replace the needle it may solve the problem, there are some numbers for needles and some are universal try to use small needle or recommend one first
If didn't work go to 2
2- replace the threads also try to use skinny thin threads must be same threads on bobbin, color doesn't matter. If didn't work go to 3
3- check thread Tensioner make sure on right position sometimes thread is tight ilor loose sewing machine doesn't stitches good,
Also check the bobbin thread Tensioner three is small screw on the bobbin case to adjust it, if doesn't work go to 4
4- if all didn't work you need deassemble remove the Covers and check for any loose parts or springs or screws, check feed dog make sure os moving correctly, if all good the last thing you need to do is timing this is not easy to fix you need to be patient and it may take several times to get right every sewing machine has timing all moves must be set at same time needle moves up and down bobbin housing rotation left and right
If the needle loose or not moving at same tome or little high or low you need to make adjustments by loose the bolt and make sure the needle line up with bobbin housing when rotate, please watch my videos here's the link for more details I hope that can help you to solve the problem,
Thank you and all the best
ruclips.net/video/9DKXECCAIBk/видео.html
Hola. Tengo una duda. Mi maquina es una Brother vx810. Y se me salio una tuerca de la parte donde está la lámpara , pero no sé de dónde es. Y la aguja pega con el prensatela cuando baja aunque está en M , la posición de la aguja 🪡. Creo que nduve tocando algun tornillo. Pero no logro arreglarlo
Hello my friend, the lamp is located on the left side of the machine above the needle, you need to open it so you can replace it, about the needle try the following,
Before you do any troubleshooting make sure the needle is on the right place ,
1- check the presser foot maybe it's not the correct one for your machine
2- check if the presser foot holder is not loosed or spring is loosed or missing any parts
Hope that can solvevthe problem
And all the best
Thanks for the wonderful video. I have a VX 880, whose reverse stitch is acting free and the feed dogs are taking the fabric towards the front instead of backwards. I can see a detached reverse stitch spring inside but have no idea where to hook it on the lower shaft. Please help. SARA from Pakistan
Good Day Sara, there are several causes for this issue, it's so hard for me to tell you what is reason exactly and how to fix it without checking the machine and troubleshooting step by step, however here are some tips and steps you can do might help help you to find out the problem and fix it,
One possible explanation may be the gears are shifting wrong position or wearing out or not sitting right, or the sewing machine needs alignment or calibration, other causes maybe some machanical parts are loose or maybe some dirt or fabric or something stuck inside the machanical movements.
You need to remove the plastic cover and take a close look.
Fabric is not feeding properly
Follow the instructions below if your machine is not feeding properly:
1. Your feed dogs may be lowered.
- Check the position of the feed dogs and raise them if necessary.
2. Your stitch length may be set on 0.
- Lengthen the stitch length between 2 & 3 on your machine.
3. Check the needle.
- Make sure that your needle is not bent or blunt.
- Make sure that your needle was inserted properly.
4. Make sure you are using the correct combination of needle, thread and fabric.
5. Your thread may be tangled.
- Remove your bobbin cover and needle plate and remove tangled thread.
6. Check the hand wheel to be easy to turn in the clockwise direction.
- If the hand wheel is hard to turn: do not force the hand wheel to turn, you may cause further damage to the machine.
7. Check that the bobbin winder shaft is pushed over to the left.
8. Make sure that the presser foot you are using is appropriate for the type of stitch that is selected.
9. If the model of the machine uses a darning plate, make sure that it is not fitted on the needle plate or remove it if necessary.
Please let me know how it goes?
This is a link of user manual you may need too
www.manualslib.com/products/Brother-Vx800-5952565.html
Please let me know whether you figure out or not, I may send you a video
Thank you and all the best 🙏😊
@@WorldRandomVideos Thankyou so much for the prompt and detailed response. I will follow your instructions and get back to you. Thanks once again 😊
@@WorldRandomVideos HI, this is Sara here. I am giving my input to your suggestions yesterday. As regards the shifting if gears etc and alignment issues, I am not in a position to check these. But, there is most likely nothing wrong with them because the machine was running alright except for some off and on thread tension issues. This reverse mode problem has come up after I opened the machine and attempted to clean it with a long stemmed nylon brush. I havd checked to make sure the stitch length is not set to zero, the feed dogs are not lowered. At present, I have removed the needle and presser foot to see the direction of the feed dogs movement. Thank you for the link to the manual. If you can please share your email, I will send you the picture showing the reverse stitch spring so that you can guide me as to what is the correct place to hook it. Thanks and Regards
Hi Sara, Sure, that's a good idea please send me some photos or a short video if it's possible, at least I can have an idea what could possibly cause the issue,
Here's my Gmail, thank you and all the best.
aliyusef1973@gmail.com
@@WorldRandomVideos Thanks, I have sent an email to you
Please can this machine do button hole and overlocking itself? I'm still trying to find my way around
Hello my friend, This machine doesn't do bottom hole or overlooking, it has basic simple stiches straight and zigzag,
Thank you and all the best 👍
Would the same principle apply to the Brother VX808 ? I manage to find one for a steal at the 2nd hand shop, but it's super noisy like the before on this video
Hello my friend, yes you're right all sewing machines either old or new, all types and brands all share the same principles which is mechanical movements,
Lubricant is so important because it makes the sewing machines run smoothly and quietly,
All the best 👍
How do I lower and raise the dog feeds on this machine ..Thanks
Hello, there's no adjustment to lower or raise the dog feed, the big dial from 0 to 4 For press back and forward sewing and numbers for stitching distance and speed,
however if you want to do manually you can raise dog feed by remove the 2 screws holding dog feed and add Washers to raise it see the video from 18:00 to 18:30
thank you and all the best 👍
@@WorldRandomVideos Hi there, would that be the 2 black screws adjacent to each other in the timestamped part? Would it effect the machine in any adverse way using washers, i.e. will they have otherwise normal movement for example? Really appreciate any help, i am a novice
@@basharatali9376 good Day, yes that's right , thank you 😊 and all the best 👌 👍
Нитку продел через жопу, поэтому сразу потянуло ткань... Нитка продевается всегда в сторону челнока.
Thank you my friend and all the best, I had to translate your comment 😊, Best regards
Hi
The Elastic Belt of my VX810 is loose, i didn't get how you said we could fix it
Sometimes the hand wheel doesn't rotate when i step on the pedal unless i rotate it with my hand first
Hello my friend, some of the sewing machines have adjustable belt bolt so you can adjust tighten or loosen the belt, it's located under the motor inside the sewing machine so you have to remove sewing machine covers to adjust the belt, I don't remember if this type of sewing machine has adjustable belt bolt or it's fixed on, if it's adjustable it's so easy to tight the belt by loosing the bolt and tight the belt and tight the bolt, if it's not adjustable and it's fixed on you need to check the belt if it's wearing out or too old and it's too loose then time to replace it, thank you so much and all the best 🙏
A little oil & grease helps out a lot..
You like to fly that rainbow flag..
That's right, thank you so much for watching and all the best 👌 👍
you are really too speedy and nervous
I am sorry, the video is speed 3× because it was too long, thank you and all the best 🙏