Hello. So my watch was not charged for quite awhile. I put it on the charger and all I get is the Apple logo coming onto the screen and then goes black again. It keeps doing this, but will not start charging. I have reset it using the two buttons and I do get the Apple logo as it is already there. Nothing else happens. My watch is not paired with my phone and I have no way to pair it anyways since it is not turning on. Is there anything I can do. I have tried different chargers and plugs etc. Thanks
My Apple Watch hasn’t been used in five years and I got a new one but I wanna see if the old one will work.I’ve been looking for vids but it still doesn’t work.😢⌚️
I don’t see how this last step is supposed to work if the watch is not connected to the phone via Bluetooth and keeps flashing the Apple logo. How is are the changes made in the Watch App on the iPhone supposed to take place if the two devices are not connected and unable to communicate since on of them is not available? Sounds like an awesome fix until you realize it’s not.
I tried all these methods and it’s still doing it. I no longer have the iPhone it was paired to because I made a mistake of trying out android for a while and just upgraded yesterday back to iPhone. I no longer have the iPhone it was linked to. Is there a way around this? Thank you.
So this started happening after I toke a swim in the sea with my Apple Watch series 6. all of a sudden it kept taking me to the switch off screen and turning the emergency notification on, after few times it went dead. After getting back home and trying to place it on the charger it started giving me the flashing apple logo, tried 2 options (no reset) since it wont pair to my phone Bluetooth in the first place to allow it to reset but nothing worked. It is very frustrating and I wish there is a solutions since I am currently not in the US and the country I am at doesn't have an apple store or any support stores that can repair/replace the watch
I get a message on my phone that says could not connect to Apple Watch… Make sure your Apple Watch is nearby, powered on, and not in airplane mode. I don’t see how I’m supposed to erase content settings and unpair them if my phone can’t recognize the watch to begin with.
My Apple Watch is still facing the slow flashing apple logo while charging and is completely dead. I have tried all three method, even unpairing it with my iPhone and it didn't worked as it said it has unpaired it partially and have to unpair it from watch side, and as apple watch is not working so I couldn't do anything. What should I do next?
I was experiencing the same thing. I was waiting for the watch to completely run dry and so I could charge it up again (thinking it would reset that way) but by putting it down it seemed to take forever. So even though it wasn’t working I decided to wear it anyway and drain the battery somehow. But by wearing it the watch seemed to fix itself… it’s working well again. So maybe try that and see.
So a bit of an update. It turns out that the issue came from water getting into the watch. I’m no professional but I’m guessing that by wearing the watch the water got out of where it was causing trouble and as long as you avoid water it should work fine. So perhaps look into getting it resealed if possible to stop water from getting in again.
When my wifenand I are charging our watch on our nightstands the display is flashing off and on with clock, battery monitor etc. The lights are driving us crazy. There must be a way to turn off the display at night while charging?
My Apple Watch is showing and exclamation ❗️ and not starting and if I long press both bottom and then it is showing apple logo again again and not starting pls give me some trick
I’m grateful for this video. I tried all the fixes except unlinking from my iPhone, and this fixed it. I was already to trash my watch 5 for a watch 7 before I tried this. Prior to this, I was on a chat with Apple and he/she did not mention this fix.
Hi everyone. My series 6 unfortunately died couple of days ago. I put on water settings and start swimming. After 10 or so minutes didn’t respond. 2 days after went on emergency mode for 5 minutes now doesn’t work at all. When I try to force reset it all it does is flashing apple logo and nothing more. On charge does the same thing. Anyone with the same problem ?
I have a apple watch 3 and none of this worked for me:( it still blinks. When i try to reset it, it just says that my apple watch isn’t connected to my iphone. So what do i do now? Please answer
I also use AW series 6, I'm having a flashing error when charging like the clip above after swimming continuously for 1 hour in the pool. Before that, my watch was Worn out battery 83%. I think when Worn out battery is below 85% you should not swim because it will damage the battery.
my apple watch is heating up in 5 minutes while on charge and boot looping, when its off the charge there is no signs of life whatsoever, I am trying to understand how it works does the apple watch only start up if it detects that everything (battery, taptic engine etc..) is plugged in inside of the apple watch. idk help me
I tried all of these and it still doesn’t turn on. I left it completely dead for a month, plug it in and it still boot loops. Prolly gonna upgrade anyways
I tired it’s didn’t work it still logo blinking my apple watch se … what can i do … i was use just 1 year …battery health 97% …. What happened to my watch please anybody help me …. Say me a solution
I have an Apple Watch with this issue; it briefly flashes but only when on charge. The first 2 options don't work & option 3 (via the Watch App on on the iPhone) can't be used either as I've replaced my iPhone a couple of times & this watch has never been synced with my current iPhone (though it should still be associated with my iCloud account, not that I think that helps?). Anyone any Ideas? I'd like to give the watch away to someone. Thanks in advance.
Was tired with this issue, tried all possible things on the internet. Finally went to the apple shop and the technician told me it is the side button which is stuck and causing restart loop. He cleaned the button with alcohol wipes and boom the watch started working
Baseado na sua resposta consegui consertar o meu S6, obg. Nao levei ao técnico, apenas coloquei no carregador e apertei repetidamente os botoes para tipo limpar ou pelo menos amenizar. Depois disso ele saiu do loop infinito da maça e ligou normalmente 😀
I just got this new Apple Watch for a gift and it won’t open at all. I put it to charge and it just flashes red and white apple logo I tried these but it doesn’t work does anyone know maybe how?
None of these worked for me 😢 I tried to erase and reset and it couldn’t do it because the watch was not in range? How can I make it in range when it won’t stop flashing and I can’t turn it on
Ok so my problem is my dad gave me his Apple Watch 7000 and when I charge it it keeps on flashing but it’s not signed in so I can’t do anything , what should I do
Charlie Gibson bro, Let your Apple Watch completely die down, it could take 2/3 days, then keep it on charge overnight and turn it on. It has worked for some people to fix the problem.😊
BLUE X Bro, Have you tried giving it a force restart? It should fix the issue. If nothing is working, it means it can have problems with the Apple Watch Battery.😊
@@BLUEX2022 So, I'm taking a chance and ordered a new battery from Amazon. Total cost with tax is $16.57. If it works, then I'll be happy. Right now the watch is a brick, but I hate to throw it away. If the battery doesn't do the trick, then I toss it. I will not pay an astronomical amount of money to repair. My issue started, I believe, because I have not used it for about five years. I have been using a Fitbit, but just decided to try the Apple watch again. It was working fine when I quit using it so the only thing I can think of is that the battery is totally hose.
Hello. So my watch was not charged for quite awhile. I put it on the charger and all I get is the Apple logo coming onto the screen and then goes black again. It keeps doing this, but will not start charging. I have reset it using the two buttons and I do get the Apple logo as it is already there. Nothing else happens. My watch is not paired with my phone and I have no way to pair it anyways since it is not turning on. Is there anything I can do. I have tried different chargers and plugs etc. Thanks
exact same thing happened to me i’ve watched so many videos and none of them work
@@ayzer7028 so frustrating 😩
Pippa.ArtStudio sis, You can let your Apple Watch die completely, then keep it on charge overnight. It often fixes the issue. 😊
same thing with me!!! have u fixed it yet?
@@joeyprom nope 👎 sadly
I guess mine just broke…
My Apple Watch hasn’t been used in five years and I got a new one but I wanna see if the old one will work.I’ve been looking for vids but it still doesn’t work.😢⌚️
jennycp216 Bro, If none of the ways worked for you then it can be a hardware issue.😊
I don’t see how this last step is supposed to work if the watch is not connected to the phone via Bluetooth and keeps flashing the Apple logo. How is are the changes made in the Watch App on the iPhone supposed to take place if the two devices are not connected and unable to communicate since on of them is not available? Sounds like an awesome fix until you realize it’s not.
yep, i tried it, it just said could not connect...because the watch is technically already off.
I just have a flashing logo. It won’t start up and it’s too expensive to repair. I feel like it’s been a waste of money. 😢
Same and idk what to do
Hey, I’m having similar issues. Have you repaired yours? :(
YR?!
I just want it to work😫
I tried all these methods and it’s still doing it. I no longer have the iPhone it was paired to because I made a mistake of trying out android for a while and just upgraded yesterday back to iPhone. I no longer have the iPhone it was linked to. Is there a way around this? Thank you.
buckeyebassinwithericp626 Bro, If nothing is working, then it can be a hardware issue, you need to repair it.😊
So this started happening after I toke a swim in the sea with my Apple Watch series 6. all of a sudden it kept taking me to the switch off screen and turning the emergency notification on, after few times it went dead. After getting back home and trying to place it on the charger it started giving me the flashing apple logo, tried 2 options (no reset) since it wont pair to my phone Bluetooth in the first place to allow it to reset but nothing worked. It is very frustrating and I wish there is a solutions since I am currently not in the US and the country I am at doesn't have an apple store or any support stores that can repair/replace the watch
Ahmed Alkhadra bro, if nothing is working, you need to repair the battery😊
@@Fix.369 ya it’s completely out now, need to take it to apple store
mine has done the exact same thing. Currently have an appointment with Apple so will let you know what they say.
Same thing happened to mine. I had to get the entire watch replaced. Thankfully it's still under warranty
Exactly what happened to mine. It’s completely dead and non of these steps are working. What should I do?
Thanks followed your advice and watch started charging back to normal, had me worried, just purchased watch less than a week ago.
Doctorbob12341 bro, Most Welcome. Glad our advice helped you to fix your Apple Watch.😊
You’re not fixing the flashing apple logo. This is just resetting your watch when it’s already on. The apple logo flashing means the watch isn’t on.
😮
I get a message on my phone that says could not connect to Apple Watch… Make sure your Apple Watch is nearby, powered on, and not in airplane mode.
I don’t see how I’m supposed to erase content settings and unpair them if my phone can’t recognize the watch to begin with.
Nick B bro, in that case, try putting it on charge, then give it a Force restart, it should fix the issue. 😊
@@Fix.369 tried that already 😔
Same problem here and doesn’t worked when I force restart
@@Fix.369please help me same issue today i bought the watch
My Apple Watch is still facing the slow flashing apple logo while charging and is completely dead. I have tried all three method, even unpairing it with my iPhone and it didn't worked as it said it has unpaired it partially and have to unpair it from watch side, and as apple watch is not working so I couldn't do anything. What should I do next?
I was experiencing the same thing. I was waiting for the watch to completely run dry and so I could charge it up again (thinking it would reset that way) but by putting it down it seemed to take forever. So even though it wasn’t working I decided to wear it anyway and drain the battery somehow. But by wearing it the watch seemed to fix itself… it’s working well again. So maybe try that and see.
So a bit of an update. It turns out that the issue came from water getting into the watch. I’m no professional but I’m guessing that by wearing the watch the water got out of where it was causing trouble and as long as you avoid water it should work fine. So perhaps look into getting it resealed if possible to stop water from getting in again.
When my wifenand I are charging our watch on our nightstands the display is flashing off and on with clock, battery monitor etc. The lights are driving us crazy. There must be a way to turn off the display at night while charging?
EarlBalentine Bro, Are you using the original Apple charger or a third-party one?🤔
I got my watch a week ago and it tried to hard reset it but the logo shows but just shuts off again and when I put it to charge it flashes
Did you maybe fix it? I just got an Apple Watch and have the same problem
@@dimitra_9929 did you fixed? Please, I am try always!!
My Apple Watch is showing and exclamation ❗️ and not starting and if I long press both bottom and then it is showing apple logo again again and not starting pls give me some trick
I tried all of them but stil have same problem , so I was lucky I had guarantee and I left it them . waiting for repair or replacement
It’s still in the boot loop after trying all of these
Courton Johnson Bro, Try draining your Apple Watch Battery then keep it on Overnight charging, it might fix the problem. 😊
How can I even get it to the point to where I can unpair it if it won’t even stay on?
IROC-Z-ROB Bro, You can unpair it from the iPhone Apple Watch App. But if none of the ways work, you might need to take it Apple Service Center.😊
@@Fix.369but the phone and watch can’t communicate if one isn’t on.
doesn't work. even tried unpairing and get a massage saying could not connect to the watch.
I’m grateful for this video. I tried all the fixes except unlinking from my iPhone, and this fixed it. I was already to trash my watch 5 for a watch 7 before I tried this. Prior to this, I was on a chat with Apple and he/she did not mention this fix.
My watch is stuck in a loop after failing to pair it with a different phone.
So now it’s unpaired and stuck in a loop.
Hi everyone. My series 6 unfortunately died couple of days ago. I put on water settings and start swimming. After 10 or so minutes didn’t respond. 2 days after went on emergency mode for 5 minutes now doesn’t work at all. When I try to force reset it all it does is flashing apple logo and nothing more. On charge does the same thing. Anyone with the same problem ?
Hi! Same thing happened with my ultra 2. If anyone knows the solution let me know.
@@angelalivino2235 Hello, did you find a solution? I have the same problem
Same here ! I think it's something with the apple watch 6 because this is my second one and I again have the same problem
I have a apple watch 3 and none of this worked for me:( it still blinks. When i try to reset it, it just says that my apple watch isn’t connected to my iphone. So what do i do now? Please answer
Magnus Ysland Bro, It can be a hardware issue, you need to take it to Apple Care.😊
I’m in this EXACT situation did you ever figure out how to manually fix it ?
@@aktoves8299 no:( i just sent mine back to apple and asked for a new one
I fixed this with the hard reset then my touch screen wouldn’t work. I unpaired the watch and the apple logo flashing retuned. Any advice?
afahmadsobri5106 Bro, It could be a hardware issue you need to contact Apple Support. They might be able to help you with the issue.😊
thank you
I also use AW series 6, I'm having a flashing error when charging like the clip above after swimming continuously for 1 hour in the pool. Before that, my watch was Worn out battery 83%. I think when Worn out battery is below 85% you should not swim because it will damage the battery.
How to fix this?
Thanks bro the first method worked for me
This worked. I used a generic charger which damaged my watch
if all 3 step are done still the problem is not solved ?
Please_subscribe964 Bro, If nothing is working, then you need to take it service center.😊
Are you for real? I should have never re paired it like I disconnected from iPhone cuz mom said it might work but never did
Thanks for this video. It helped me fix my watch It may take some time But it really works 🤩👏🏼♥️
Thank you !! My watch is working yay !!😢
my apple watch is heating up in 5 minutes while on charge and boot looping, when its off the charge there is no signs of life whatsoever, I am trying to understand how it works does the apple watch only start up if it detects that everything (battery, taptic engine etc..) is plugged in inside of the apple watch. idk help me
Therealjjjay Bro, It can be a hardware issue, you need to take it to service center.😊
I tried all of these and it still doesn’t turn on. I left it completely dead for a month, plug it in and it still boot loops. Prolly gonna upgrade anyways
Still not working i done same things what do bro?
SHANU VIBEZ bro, If nothing else works, it could be a hardware issue, like battery failure, you have to repair it.😊
Nope nothing worked any other suggestions
I tired it’s didn’t work it still logo blinking my apple watch se … what can i do … i was use just 1 year …battery health 97% …. What happened to my watch please anybody help me …. Say me a solution
Visual Engineering bro, You can let your Apple Watch completely die down, then keep it on overnight charging. It can fix the issue.😊
This still did not work for me😢
I have an Apple Watch with this issue; it briefly flashes but only when on charge. The first 2 options don't work & option 3 (via the Watch App on on the iPhone) can't be used either as I've replaced my iPhone a couple of times & this watch has never been synced with my current iPhone (though it should still be associated with my iCloud account, not that I think that helps?). Anyone any Ideas? I'd like to give the watch away to someone. Thanks in advance.
Did you ever wind up fixing that issue? I'm in the same spot!
No I didn’t, it’s still the same. 😢
any solution
None of these methods worked sadly. Keeps flashing apple logo...holds no charge
Naomi M, In that case, it can be a hardware problem like your battery not working, and you would have to repair it. ☹️
I wish we haven’t unpaired now how do I fix this
Bro, Have you tried giving your Apple Watch a Force restart? It can fix the issue.
Was tired with this issue, tried all possible things on the internet. Finally went to the apple shop and the technician told me it is the side button which is stuck and causing restart loop. He cleaned the button with alcohol wipes and boom the watch started working
Baseado na sua resposta consegui consertar o meu S6, obg. Nao levei ao técnico, apenas coloquei no carregador e apertei repetidamente os botoes para tipo limpar ou pelo menos amenizar. Depois disso ele saiu do loop infinito da maça e ligou normalmente 😀
This actually fixed my issues thank you
I my watch is dead . I try to delete Apple Watch and settings and it didn’t work for me
Same here
I just got this new Apple Watch for a gift and it won’t open at all. I put it to charge and it just flashes red and white apple logo I tried these but it doesn’t work does anyone know maybe how?
I’ve done this and it doesn’t work and logo won’t show only flashes
Snipsnip Xx Bro, If nothing is working, it can be a hardware issue, you need to contact Apple support.😊
None of these worked for me 😢 I tried to erase and reset and it couldn’t do it because the watch was not in range? How can I make it in range when it won’t stop flashing and I can’t turn it on
Fiona Jane Sis, Keep your Apple watch on Charge, then after 30 Minutes, give it a force restart, it can fix the issue. 😊
@@Fix.369 just tried this and still no luck bro 😭 what do I do now
Thank you. Watch your video and the first attempt works for me.
series 4 after 8 months to connect charge
Ok so my problem is my dad gave me his Apple Watch 7000 and when I charge it it keeps on flashing but it’s not signed in so I can’t do anything , what should I do
Ethan Felder bro, Make sure you are using an original Apple Adopter, it can fix the issue.😊
Didn’t work on Series 5
Veronica Howes bro, Try the methods again, sometimes, it takes more than one try. If even it does not work, it can be a hardware issue.😊
None of these have worked. What else can I do?
Erica Hodgson bro, If none of the ways are working, it could some hardware issue with your Apple Watch’s battery, you need to repair it.😊
Same :(((
thank u
hello logo hanging boss
None of the method is workings
Sahil Khan Bro, If nothing is working it can be a hardware problem, and you need to repair issue. 😊
Didn't work :(
NaomiKeysha1 Bro, If nothing is working then it can be a hardware issue, you need to repair it.😊
What do I do if my watch isn’t paired to my phone atm (had it on an old phone that broke)
SPSQ Logan bro, Let your Apple Watch Drain of battery then keep it on charge overnight, it might fix the issue. 😊
Didn't work I tried all three and is still boot looping
Charlie Gibson bro, Let your Apple Watch completely die down, it could take 2/3 days, then keep it on charge overnight and turn it on. It has worked for some people to fix the problem.😊
@@ABCis123 did it work?
@@enternamehere1767 I tried it and it didn’t!
@@georgebampas7916 I just had to let mine sit alone for a bit and I randomly got a notification to pair the watch out of nowhere.
@@enternamehere1767 good for you!! 👍
I have a Video of how I fixed it 💯 %
send us the video
Yer so your method clearly doesn't work rest my case waste off time
BLUE X Bro, Have you tried giving it a force restart? It should fix the issue. If nothing is working, it means it can have problems with the Apple Watch Battery.😊
Sorry for sounding short nothing works done everything thanks for message 😊
@@BLUEX2022 So, I'm taking a chance and ordered a new battery from Amazon. Total cost with tax is $16.57. If it works, then I'll be happy. Right now the watch is a brick, but I hate to throw it away. If the battery doesn't do the trick, then I toss it. I will not pay an astronomical amount of money to repair. My issue started, I believe, because I have not used it for about five years. I have been using a Fitbit, but just decided to try the Apple watch again. It was working fine when I quit using it so the only thing I can think of is that the battery is totally hose.
Hold down both buttons for 90 sec
Thanks, I fixed my issues!!!!! 🎉 i dont use my Watch on monthes about that problem 🫶🏻
Thank you