Thanks for a great video explanation above XL6009. Just notice, you mention this regulator only is a BOOST converter. Uptodate, this XL6009 now is available in both version, at same PCB. That's means, it's a BOOST and BUCK converter.
Bhai circuit diagram ke saath show kiya hota to thoda samajh bhi aata, log theory ke saath relate kar paate. Remember, diagrams are the universal language of engineering!
first thing remove the inductor from pcb and place new inductor with 4 wire just like transformer which has two coils a secondary & primary, now connect primary coil to XL6009 SW pin and input VCC. Now the second coil i.e. secondary coil will connect at GND and diode to which gives the output, that's the modification you can do and make its buck-boost converter
wind two 0.6mm wire parallelly of 30 to 40 turn and one coil goes to Switch pin of XL6009 and other to VCC input, and other coil is the output which is connected to diode and GND. The inductor core is taken from SMPS dc filter, size is Outer diameter = 17mm Inner diameter = 13mm width = 6mm
Thanks for a great video explanation above XL6009. Just notice, you mention this regulator only is a BOOST converter. Uptodate, this XL6009 now is available in both version, at same PCB. That's means, it's a BOOST and BUCK converter.
Most Welcome 👍
Very innovative information
thanks 👍
How long it can run on 5v 1amp to 12v 1amp output? Will that ic get damaged?
in the input max current limit is 3A, giving 5v 1A works fine
How much ampere we can draw from this ? Can we take 1 Ampere without damaging ?
yes easily and peak to peak upto 3A
Bhai circuit diagram ke saath show kiya hota to thoda samajh bhi aata, log theory ke saath relate kar paate. Remember, diagrams are the universal language of engineering!
Next time I will do better, thanks for suggestion
What is the henry value of the inductor?? 🙏 thanks
200uH or 0.2mH
@@innovationicprimary or secondary? Or same on both?
Hello is it possible this booster module XL 6009,to modified the output up tp 50v output?
yes but over 50v it might damaged as its max limit is around 40 or 45
Can u send me the diagram to boost again 40-45v max out tnx
How can increase output Amp of XL6009 module? Please convert the Amp.
output amp of xl6009 is maximum 3A its maximum rating of xl6009 IC
excuse me , can i upgrade xcluma 150W Dc-Dc Boost Converter 12-35V/6A in the same thought?
yes you can
Nice one
Please with this update will it work with 5v 1a to 12v 1a?
after update it works as normal as before
जादा देर नही। चलेगा। कुछ देर तक। टाईप ओर चेकीग। के लिऐ। सही। हे..
aap try kiya h
Can you explain with circuit the change to be made and then make the upgrade ?
first thing remove the inductor from pcb
and place new inductor with 4 wire just like transformer which has two coils a secondary & primary, now connect primary coil to XL6009 SW pin and input VCC.
Now the second coil i.e. secondary coil will connect at GND and diode to which gives the output, that's the modification you can do and make its buck-boost converter
How to increase itsvoltage rating
its ratings are fixed by XL6009 IC
How is the load regulation?
load regulation works fine as before the modification
10 to 15 ac amp
@@sahilali1815 10 to 15 ac amp is big number, you can't achieve with this circuit
how to make the inductor? and what size?
wind two 0.6mm wire parallelly of 30 to 40 turn and one coil goes to Switch pin of XL6009 and other to VCC input, and other coil is the output which is connected to diode and GND.
The inductor core is taken from SMPS dc filter, size is
Outer diameter = 17mm
Inner diameter = 13mm
width = 6mm
can i use 0,5 mm wire ?
yes
thanks sir
no schematic, no datasheet, very risky and dangerous, not recomended .....
schematic is given here
innovationic.blogspot.com/2024/01/xl6009-buck-boost-converter.html
Dc to ac converter
yes I am working on it