nice project , just a note : the SMD inductor printed 470 on it is not 470uH , it is in fact 47 uH , we write 47 and third number is number of zeroes .
Its because the inductance was too low on the yellow core , This is why i said to use a bigger core from atx powerSupply , using green core is not recommend
LM2596 - это понижающий преобразователь, и этот трюк работает только с повышающими преобразователями, его невозможно использовать. Я сделал еще много других с конвертерами большего размера, вы можете посмотреть, у меня есть видео 👍 ruclips.net/video/RvXoSV508a0/видео.html ruclips.net/video/WXHqtzx5tdg/видео.html
@@Electronic_For_You Спасибо за консультацию. Эти видео смотрел еще вчера. Эти мощные и у меня есть, но модернизировать их нет нужды. Маленький dc-dc на х6009 управляет 2 вентиляторами на 24в 0,38А и мне нужно было снижать напругу до 6-8 вольт ( очень тихо тогда крутятся).
Auto mean. Xl6009 is only boost converter module.only boost.not buck But your changes in module is made it buck boost Converter module.input voltage are fixed.and output voltage are step up and step down.
Esse módulo XL6009 é perigoso, entra não que é fria. Se a tensão na entrada cair a 3,5 volts, a saída chega a 40 volts, ou seja, erro feio de projeto, problema exclusivo desse chip.
nice project , just a note : the SMD inductor printed 470 on it is not 470uH , it is in fact 47 uH , we write 47 and third number is number of zeroes .
Oh,
Thanks for the information
I made the inductor is closer to 450 uh and it works fine , maybe higher inductance is not a problem?
Pm me can you to install do solar panel of charger..
Amazing work ❤
Pm me can you to install do solar panel of charger..
How can increase output Amp??
Cannot be interested because it's fixed by ic
Can this steadily output 15v 3a? (Input is 24v 6a)
2A can do
@Creative for you
Let's say 3A instead.
3 amps will drop voltage
@@Electronic_For_You So you're saying there's a chance?
Pm me can you to install do solar panel of charger..
What is the henry value of the inductor? Thanks 🙏
Unknown,
Do the same turns as i did
Pm me can you to install do solar panel of charger..
good project ❤
Thanks
Pm me can you to install do solar panel of charger..
Nice video
You skiped the video in the beginning the core was yellow but at the end it’s colour chaged how??
Its because the inductance was too low on the yellow core , This is why i said to use a bigger core from atx powerSupply , using green core is not recommend
Pm me can you to install do solar panel of charger..
Very good
Pm me can you to install do solar panel of charger..
How many volts is the minimum input voltage? Can it be input using an 18650 battery?
The XL6009 ic works from 5-6V minimum
Pm me can you to install do solar panel of charger..
Nice
Pm me can you to install do solar panel of charger..
470 inductor is damaged now what can be done to fix it?? Please answer me...❤❤❤
You can make an Inductor by Windings in ring core
@@Electronic_For_You thanks
@@Electronic_For_You but, How many patches will be needed for what size core to make 470 uh?????
You can try online calculators for Inductor windings
Pm me can you to install do solar panel of charger..
Hiw many turns you did and how is the winding connection to the board ?
20 turns and I showed everything connection on video
Pm me can you to install do solar panel of charger..
@@Electronic_For_You Hi, The connection points of the coils are not fully understood. That part was skipped in the video. Can you explain?
Can we use 12v charger to charge 12v lithium battery instead of xl60009.
Sorry i didn't understand what you mean
Yes you can charge but bms is very important.
Pm me can you to install do solar panel of charger..
А с dc-dc преобразователем понижающим (на LM2596) можно такой фокус осуществить? У меня их 5 штук без дела валяются...
LM2596 - это понижающий преобразователь, и этот трюк работает только с повышающими преобразователями, его невозможно использовать.
Я сделал еще много других с конвертерами большего размера, вы можете посмотреть, у меня есть видео 👍
ruclips.net/video/RvXoSV508a0/видео.html
ruclips.net/video/WXHqtzx5tdg/видео.html
@@Electronic_For_You Спасибо за консультацию. Эти видео смотрел еще вчера. Эти мощные и у меня есть, но модернизировать их нет нужды. Маленький dc-dc на х6009 управляет 2 вентиляторами на 24в 0,38А и мне нужно было снижать напругу до 6-8 вольт ( очень тихо тогда крутятся).
А dc-dc на XL4015 можно усовершенствовать?
XL4015 Это уже хороший преобразователь на 5А, но только в понижающем режиме.
This called, Auto Buck Boost Converter, module.👍👍
Not auto you can adjust the voltage
Auto mean.
Xl6009 is only boost converter module.only boost.not buck
But your changes in module is made it buck boost Converter module.input voltage are fixed.and output voltage are step up and step down.
In fact, this Xl6009 works as "flyback converter".
Yeah
Pm me can you to install do solar panel of charger..
Pm me can you to install do solar panel of charger..
Sorry I don't
Why heat the ring so much with a soldering iron, it was yellow, but because of overheating it turned green
😆 Yellow ring wasn't 100uH
Pm me can you to install do solar panel of charger..
how many amper support this mojo
1Amp To 1.5amp
Pm me can you to install do solar panel of charger..
Странно, мотал провод на желтом кольце, а на плату припаял зеленое...
Потому что желтый не сработал! 🤷
Желтый сердечник - слишком низкая индуктивность.
@@Electronic_For_You Повторил, как на видео - все работает! Спасибо.
Пожалуйста
Спасибо за просмотр видео 🪛
👋
How much ampere
1-2Amps depends how good your modification is
wow
Pm me can you to install do solar panel of charger..
15+15=30 yea 2 wire total 15
15+15
Esse módulo XL6009 é perigoso, entra não que é fria. Se a tensão na entrada cair a 3,5 volts, a saída chega a 40 volts, ou seja, erro feio de projeto, problema exclusivo desse chip.
Yes you are right, The input voltage should be above 3.5V for stable operation.
@@Electronic_For_You❤
@@Electronic_For_You❤
@@Electronic_For_Youmas o problema é se ocorrer uma falha e a tensão baixar de 3.5 volts, ou seja, melhor trocar para um módulo seguro.
Bro after modification my boost converter only works as buckconverter
It should work as both
Pm me can you to install do solar panel of charger..
@@anwin85alon what bro ?