Это видео недоступно.
Сожалеем об этом.
Should you buy Maxpeedingrods Coilovers? Let's install them on my G35 & find out!
HTML-код
- Опубликовано: 16 авг 2024
- Welcome back! In today's episode I installed a set of maxpeedingrods coilovers! For roughly $300 you really can't beat what you get in the box but will they hold up over time? make sure to stay tune for more updates! I will see you all In the next video!
If you wish to contact me for any reason you may do so at my email earaujorojas@gmail.com.
10% OFF code for all maxpeedingrods produucts : ERICSDIY
Coilovers link : www.maxpeeding...
Follow me on Instagram, Facebook and Twitter to get sneak peaks of upcoming videos!
IG | www.instagram....
Twitter | @ERICSDIYGARAGE ER...
Facebook | / erics.diygarage
Help support ERICSDIYGARAGE by purchasing the items using the provided direct links, all profits will help support the channel thank you!
Items used in today's video
My favorite gloves
Diamond Grip Latex Gloves
www.amazon.com...
My Main Camera
Canon M50 Kit
amzn.to/2U7aPCr
Action Camera
GoPro Hero 7 Black
amzn.to/2wS8Bip
My Favorite Mini Tripod
Manfrotto PIXI Mini Tripod, Black
amzn.to/2vZkTpg
Big 4.5 drain pan
amzn.to/32Oz5Sa
Large pan for transmission
amzn.to/3sb5QBS
THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY, DO AT YOUR OWN RISK!
keywords
#maxpeedingrods #ebay #coilovers #g35
10% OFF code for all maxpeedingrods produucts : ERICSDIY
Coilovers link : www.maxpeedingrods.com/product/nissan-fairlady-z33-350z-2002-2009-adjustable-coilover-shock-absorber-strut-suspension-kit.html?tracking=ERICSDIY
You are THE MAN, Eric! I bought this set for my '05 G35X. I know there's a small difference between the AWD and RWD suspension, but this is all the info I need to be prepared for my install. Really dude, you've helped me a lot with fixing up my project G. Keep doing what you're doing!
Glad to help thank you!
R u still running these coils on the g35x? I also have a 05 g35x and I’m currently in the market for coilovers but I’m not sure which ones will fit with the awd g
@@vloak1023 MaxSpeedingRods have a set made for the AWD. I literally just put them on my '05, front and back. They should run you about $300 for the whole set. The only bad part is the AWD versions don't come with the little silver piece that Eric has on his front coilovers that hold the brake line and the ABS cable. I asked MaxSpeedingRods if I can buy those pieces separately and it doesn't look like I can.... whatever, zip-ties it is.
Hey my tires are being shredded too and didn’t know y until this vid!!💪🏼, but now I want to know if I need after market toe arms or camber arms or both???
Ive been running them on z1 upper control arms for 7 months shits are perfect with some preload adjustments and stiffest dampening option. And i drive hard everyday!
Awesome glad to hear they are holding up!
These coilovers look identical to the budget set I bought from Z1 Motorsports or Concept Z Performance several years ago. Performance wise, they were great. Lowered the car a little bit which helped with cornering/body roll. Longevity wise was a different story. I removed them after a year as one shock started leaking. Ended up going to stock shocks/struts with Eibach lowering springs.
Longevity is the only downside only time will tell thanks for that info I was not aware
How it holds up??
How is the ride quality of the eibach springs? Thinking of putting some on my Camaro but I’m kinda iffy about lowering springs
@@jo.maro36 I have the Eibach Pro-Kit which is only about a 1" drop. It was a little bit more firm than stock, but not harsh at all. The Eibach Sportline is a much more aggressive drop for my car, and would have been even more firm, but I never race/track my car, so I never felt a need to go lower/firmer.
@@Wes_T ok yea I’m not tracking my car or anything either I just want to close that gap pretty much so that sounds perfect to me. As long as it’s not too bouncy haha. Thank you
Bro I had these and they were great until they gave out suddenly car went over a speed bump and at expected for a lowered G and the rear tower blew out and got bent. Wouldn't recommend just save up and get a good set.
you were going too fast cause same will happen with teins or godspeed
I run these on my Honda Prelude and havent gave out. Its not been driven more than 10,000km though
Great video! Did you ever do any updates to the 35
I put these on my g and the threads on all 4 stripped when adjusting the ride hight.waste of money.my opinion
Why didn't you grease the coilover components that would be rubbing while you drive when you had it apart?
Damn, good thing I found his channel, I've been dying to do some suspension upgrades on my cars. I've got an 11 Lancer gts 2.4 and an 06 g35 coupe. This setup looks nice though.
Brooooo i just got a 2005 g35 coupe. I'm excited. And it has reverse i feel spoiled
Hey I put 20s on my g37 cpe and my front driver tire is being shredded but only when I go up my slanted driveway , I have to turn left to get up my steep driveway which has caused the tire damage just like the picture you showed, now my question is your were saying to get aftermarket tow arm so with these can you do that or no would I need the Raceland ones? Because I'm assuming I need adjustable tow arms right?? I'm lucky I only damaged one tire and found out it's been from going up the driveway, I also can't find a place to do an alignment every since i put the 20s on my car because it sits lower in the front so I don't know what to do to be able to get an alignment, would love to know your opinion when you have time and thx 🙏
is your rear bouncy at all? I installed maxpeeding rods in mine as well but the rears are true coils and bounce so crazy. it's stiff but bounces crazy on the highway when there's a dip
No mine feel pretty good, try adjusting your damping settings
@@ERICSDIYGARAGE I did, I maxed them out and they are much stiffer which I like. but the moment it dips down over a bridge area it bounces like crazy but settles back real quick. I used to be on lowering springs so it was smooth but maybe I'm just not used to it
@@user-up3vx2hk1q did u find the solution to tht problem? mine is also really bouncy
@@fc1will I honestly haven't. I raised it up and have just been driving it the way it is. It's not as bouncy as before but I have the damper on max stiffness. If I make it any lighter it's like riding a boat and I'll throw up.
@@user-up3vx2hk1qwhat abt now? Is ur car bouncey. Should I get these or nah
Did You end up fixing the noise in the back ? Is there a insulator for the spring I can buy ?
No I havent found a solution it clunks a bit still but not too crazy
@ERICSDIYGARAGE mine does this also on my g35 it makes a small noise but I think it's because of my wheel bearings on the wheel lol
Can you put a 1/2 thick rubber cut out washer to to quiet them this would be DIY.
Probably will work but the spring it also to small for the bottom on the bucket to sit flush
No, you should spend the money on a decent set of coil overs. These are hot garbage. They just look cheap as fuck. Honestly that whole car belongs in the junkyard.
Does this fit 2007 Infiniti g35 coupe rwd?
Yes 2003-2007 g35 coupes
So would they fit on a fx35 ?
My front coilovers from the front are too close or touching my lower control arm
I think your referring to the compression arm it could be that you have them set too low
Brother good morning I have an m35 2006 and I’d like to know in what state are you? I’ll give you mine to get the valve cover replaced
Professional grade and Ricelands don't belong in the same sentence. 800 Dollars is cheap, cheap.
Thanks for your opinion
Did you find out what was the clunking noise? I installed mine and I’m also heading a clunking noise when going over the dividers
The clunk is because of not enough suspension travel sadly I don't think it can be fixed I just go over them slowly
What other bolt do u take off besides what's on the lower control arm
Mine excessively noisy in the back they clunk anything to get that to go away
well his didn’t fit the rubber insulation in the rear , maybe since you probably didn’t get to fit that either, that’s the noise
Can the stock springs be used in the rear with the maxspeedingrods struts ?
Yes but you will be at stock ride height in the rear
What did you end up doing about the lower bucket seat insulator? Greased it, universal seat, or nothing.
I installed it that way. it only made noise when hitting potholes
@ERICSDIYGARAGE I think I have that issue you mentioned , my rear tires look like their cambered looking sideways I have tein coilovers. So to fix that I would have to go with an entire different set up of suspension then ?
Yes, however camber arms can help but it won't fix the problem entirely your toe setting is going to be off as well and to fix that you need to remove the spring bucket which means true style coilovers
Also I have that clunking sound as I am driving sometimes or when I go over a speed bump I hear a that clunk coming from the rear could it be because of the coilovers having metal to metal contact ?
How low did you drop the rear
I see on the website there is an orange set for like 330 and a black/blue set for like 470. I dont know whats the difference though?
The blue set is suppose to be a updated model
Bro i need your help!! Finally ready to get coilovers but dont know what to do. Should i get divorced rear spring and strut or full complete struts/coilovers and add the camber thing in the back. Or what brand. I have a 07-08 g35x same as the 09 g37x. All same crap. Help please!!!
Spend the money on good coilovers.
Your welcome
Bro why is shipping fee 410
Interested in buying these. Have they held up longevity wise? Great video btw
tell me if he responds
They are fine they don't ride the best, but so far, no leaks or catastrophic failure
What do I need to do to get rid of the clunking noise in the back didn't have it before Now every bump
Don't buy the cheapest suspension option on the market and you won't have to put up with random noises.
Could you make a peice of rubber to sit under there to stop clunking ???
I'm sure it can be done but without a 3d printer not sure if it's something the every day person can do
What do you recommend for 2007-2008 infiniti g35x sedan awd
Oem
@@FELIPE8226M😂
Do you think these are better then raceland?
No
How low did you put them
It's hard to say but around the middle
how does it hold up now
They are still working fine
@@ERICSDIYGARAGE u recommend em ? i don’t track my car but i do usually do burnouts or dounuts when i’m bored
You should be fine
You all must have some Awesome streets there to ride yer car that low lmao Here in Canada your car would be trash in no time lol some of our potholes would eat that car up here haha and our speed bumps would high center it lmao Either way maybe invest something with a little more road worthy life span :) Peace
Trust….. here in arizona the roads suck. He got lucky it didn’t get ripped off
I’m sorry u live in a shitty place 😢
Slamming cars like that and driving them on the street absolutely destroys them. Dudes will slam their cars to the point that they can't get out of their driveway without scraping.
Toronto vibes😂
That's what's holding me off from getting coilovers. The streets are trash.
Literally money shifts 😂😂
the thing is how long they gonna last 😅
8 months, and they still work fine. I can't tell a difference from my bc coilovers that I have
Does your link and coupon still work??
I'm working on a new video with maxspeedingrods try this code here the code and link for you
10% OFF discount code for maxpeedingrods products : ERICSDIY
Coilovers: www.maxpeedingrods.com/product/maxpeedingrods-24-way-adjustable-coilovers-for-nissan-350z-z33-03-08.html?tracking=ERICSDIY
what shifter you got bro
Mishimoto weighted shifter
Do these fit on my g35x
No
Not worth it! Chinese made craps will last 2-3 months max! But TEIN coilovers for 1000$ made in Japan
Mine are still holding up fine
11:00 that don't look rite
It's installed correctly
Erik bro I like your channel, but these coil overs are so trash
Bruhhhh WTF 😲😳😱, u installed the rear coilovers wrong! The spring goes with the shock, not in the spring bucket! Thts y it doesn't fit right, an theres clunky noises! They go together jus like fronts! 😁🤭🤣 LMAO
Ayo u for real😂
They are installed correctly sorry to burst your bubble
He did it the stock way. If he had true style rear coilovers he could install adjustable rear toe arms to take up the place of the spring. How noisy is the rear? Am debating these and true coilovers for the rear w rear adjustable toe arms.
Sale me your rims
Not forsale sorry
Can I have them for free 😁
@@ERICSDIYGARAGE lol just playing bro
my daytona jack same model as yours wont go down as easy when under load
for exampe ill have the car up and im trying to lower it back down and it jack lever wont turn to lower the car i have to go up and down then turn slowly and it jolts a little @ERICSDIYGARAGE