TY TY TY SOOOO VERY MUCH!!! I recently am attempting to engrave on the super thin cricut brand leather to make custom leather bounded flasks as groomsman proposal gifts for our upcoming wedding. I used the engraving tip and was honestly disappointed with the out come of the engraving on the leather. I figured there must have been something wrong because you could feel the engraving but not necessarily see it. Ty or sharing the tip about layering multiple duplicate images one on top of the other. I can not wait to go home and retry the project!! You have restored my faith in the cricut makers leather engraving abilities!!
I’ve seen people engrave on spatulas or other serving utensils. That is something I wanna try! I LOVE the light! So cool!!! As always! Thank you so much for your video, very motivational! You guys are awesome!!! Thank you so much!
Yes! I had bracelets to engrave, lol but we had to make time for the "secret" project! :) we also looked for a spatula, but as expected, they were hard to find in the middle of winter! :)
Just a tip, if your layering, set all your layer wit a couple of registration dots so when you start laying everything down you line the marks and everything will line up perfectly.
I sadly don’t have a maker but I hope that changes soon🤗 saving for it!! Thank you for showing the infusible Ink , it was kinda a mystery to me yet , lol y’all are awesome!!
Oh you so need to get the laser engraver, you could teach me how to use mine. :D I'm so glad I subscribed to your channel. Your so much fun to watch! Thanks!!
Love your channel and sense of humor. I got a Cricut Explore Air 2 for Christmas but haven’t had much time to play yet. Love the idea of using it with the leather especially. Thanks for sharing and for always making me laugh. 🤗 #kindnessmatters
Please show how you down load it please because i want to make one for my daughter inlaw ahe new in April with my first grandbaby that we just found it out it a boy and i really want to make aa bay yoda both her and my feauter daughter inlaw love strar wars. And my husband and i love the serious we watched . My husbanf got me the maker for christmas.
You can find them in Etsy. And do a quick search on RUclips for how to import! There are tons of great instructional videos. I'd suggest: Melody Lane, Lorrie Nunemaker, Auntie Tay, Tanner Bell.
You Guys!! How totally Rad!!! Love these!! I don’t have a maker, just an air 2... but it would be worth upgrading just for the engraving! And the baby Yoda... WHATT?!? I love him, he was awesome! You guys should check out conde.com. They have so many cool things on there that can be sublimated onto. I heard of them thru Crystal Ann’s channel. You guys would love all the things on there. You guys totally rock!! ☮️
Hi!! New to your channel loved watching ya'll I'm from Fort worth ,TX . Loved the bunny sighn y'all made . I had one question what kind of cricut do you have.?. I've been wanting one but can't decided yet ..I like the sighn that you always change to say something different in the background...
Thanks Kristina! We have the Cricut Maker. And, sometimes I get quite the giggle picking the new quote for the week. :) I thought the fries one was hilarious
what type of cricut did y'all use for all types of projects. I'm in the process of wanting to purchase one for all types of projects as was seen in this video
@@KimandGarrettmakeit do you know if you would get the same or similar results? Wanting to have something that I can "diversify" with, but don't necessarily want to spend all the way up to the maker
Is that German?? 🤣I’m still laughing about that. Well Santa didn’t bring me a Cricut for Christmas so I guess I will have to buy my own. Poor me. Lol! I can’t wait to do projects like this!!!!
I did a tutorial on my channel on how to engrave a pie server if you and your husband want to check it out 🤷♀️😁 I want to do leather next!! Yall are awesome btw! 🥰
Wait a min u have 6 kids!! U said ur a clan of 8 Well 7 with Garrett. Lol can u guys link the material you used so we know where u got it from. And where u got the svg.
Lol, yes six kids and a Garrett! :) It's a crew! I think he added the tools used in the description and for the svg, just search Baby Yoda SVG on Etsy, there are a bunch of cute ones!
I still need to try engraving with my Cricut explorer air 2. Now, I’m inspired!
Thank you two!
♥️🌹♥️🌹♥️
TY TY TY SOOOO VERY MUCH!!! I recently am attempting to engrave on the super thin cricut brand leather to make custom leather bounded flasks as groomsman proposal gifts for our upcoming wedding. I used the engraving tip and was honestly disappointed with the out come of the engraving on the leather. I figured there must have been something wrong because you could feel the engraving but not necessarily see it. Ty or sharing the tip about layering multiple duplicate images one on top of the other. I can not wait to go home and retry the project!! You have restored my faith in the cricut makers leather engraving abilities!!
Great!!! Let us know how it turns out! Congratulations on your upcoming wedding!!!
All of them came out very nice I'm glad you stayed with the shelves it looks good
Thanks Terri!
I love you guys. Absolutely think the way you present your videos is fun and easy to follow. Thank you for being you.
Tahnk you!
I’ve seen people engrave on spatulas or other serving utensils. That is something I wanna try! I LOVE the light! So cool!!!
As always! Thank you so much for your video, very motivational! You guys are awesome!!! Thank you so much!
Yes! I had bracelets to engrave, lol but we had to make time for the "secret" project! :) we also looked for a spatula, but as expected, they were hard to find in the middle of winter! :)
I've done spatulas but they decor only once you Pierce the stainless steel it will rust.
Dude put your hands in your pockets, lay off the speed and let her do all the talking.
Great projects, hubby & I love the mandalorian, definitely need to try these projects.
Thanks Yvette! Can't wait for season 2!
It's not baby Yoda..lol
Time to get an engraving tool for my Maker. Great Job!
Have fun!
Hello Kim and Garrett hope y'all are doing well. Great projects 👍 love the baby Yoda. Much love and big tx hugs from South Tx.
Thank you for this video! My engraving tool will be delivered tomorrow so today I will be looking around the house for things to engrave.
Yes! Personalize everything!!
I reallllly want a Glowforge.
Please do not "feed" the animals! He needs no more encouragement! :)
Haha I hear that. This is how my husband feels about me.
I find that when engraving metal I go over it at least twice sometimes three time for a deeper engraving
Oh thanks for the tip!
great job you guys look forward every week to your videos
Thank you so much for watching!!! :)
Love watching you guys!! It's nice that you try things that may work other than what they tell you!!
Thanks Robin!
Just a tip, if your layering, set all your layer wit a couple of registration dots so when you start laying everything down you line the marks and everything will line up perfectly.
Ok great tip! Thanks Bob!!! :)
Hi both of you ! i have made with my cricut and infusable ink a bear on a metal tray and it came out not to bad!
I sadly don’t have a maker but I hope that changes soon🤗 saving for it!! Thank you for showing the infusible Ink , it was kinda a mystery to me yet , lol y’all are awesome!!
Keep saving! I look forward to seeing your first project! Share it with us!
Great challenge guy’s, pretty cool.
Thanks for watching Renda!
How do you know where to place your material on the mat? I thought it always went to the top left corner.
Oh you so need to get the laser engraver, you could teach me how to use mine. :D I'm so glad I subscribed to your channel. Your so much fun to watch! Thanks!!
Ok....your comment and its likes aren't helping my case! Garrett just told me "everyone's voted, I need a laser engraver" 🤣
@@KimandGarrettmakeit, awesomeness at it's best!! Can hardly wait!!
Love your channel and sense of humor. I got a Cricut Explore Air 2 for Christmas but haven’t had much time to play yet. Love the idea of using it with the leather especially. Thanks for sharing and for always making me laugh. 🤗
#kindnessmatters
Awesome work 👍
I saw on another video that on leather instead of removing the mat just load it again or increase pressure for leather if it didn't cut deep enough.
Sounds like a good idea!
Can this be done on silicon Apple Watch band?
I love all of them, but I haven't tried any of those yet. I like to see if yours works 1st lol.
Ha! Yep, smart, let us show you what NOT to do! ;)
That leather has already been dyed so it's not tooling leather..
I don’t have a cricket but I have a cameo three I might have to try this ❤️
Yes, let us know if it works out!
Great project! Enjoyed this week's video!
Thank you! 👍
Hey guys, that's not tooling leather. Tooling/veg tan leather is firmer and does better on the Cricut than some softer leathers
Thanks for the tip Amy!
Cool
What if you sublimate on the aluminum then engrave, like you did with the 2nd acrylic? With patterned infusible ink?
Yes! I tried that afterward. It turned out great!
Would like to see the results
❤️great projects!
Do u think i can make small acrylic tags with cricut like acrylic mirror tags
Please show how you down load it please because i want to make one for my daughter inlaw ahe new in April with my first grandbaby that we just found it out it a boy and i really want to make aa bay yoda both her and my feauter daughter inlaw love strar wars. And my husband and i love the serious we watched . My husbanf got me the maker for christmas.
You can find them in Etsy. And do a quick search on RUclips for how to import! There are tons of great instructional videos. I'd suggest: Melody Lane, Lorrie Nunemaker, Auntie Tay, Tanner Bell.
Wait a second, infusible Inc. sheets will work on the aluminum? So it does not wash off it is there permanently?
Yep and yep! :)
I hoing my sons get bn mevthe engraving tool for my Birthday Sunday
Yes! 🤞
Have you tried sublamaion or infuseable ink on leather? Would love to see if works!
We have but we got a bigger machine since!
You Guys!! How totally Rad!!! Love these!! I don’t have a maker, just an air 2... but it would be worth upgrading just for the engraving! And the baby Yoda... WHATT?!? I love him, he was awesome! You guys should check out conde.com. They have so many cool things on there that can be sublimated onto. I heard of them thru Crystal Ann’s channel. You guys would love all the things on there. You guys totally rock!! ☮️
Hi!! New to your channel loved watching ya'll I'm from Fort worth ,TX . Loved the bunny sighn y'all made . I had one question what kind of cricut do you have.?. I've been wanting one but can't decided yet ..I like the sighn that you always change to say something different in the background...
Thanks Kristina! We have the Cricut Maker. And, sometimes I get quite the giggle picking the new quote for the week. :) I thought the fries one was hilarious
Love the pegboard! So what about engraving wood?
We didn't think to try wood, I guess we'd have to use some that's about 2mm thick. I'll give it a try!
what type of cricut did y'all use for all types of projects. I'm in the process of wanting to purchase one for all types of projects as was seen in this video
The maker !
Can you put the engraving tool on the cricut air 2??
The Cricut engraving tool only works in the Maker, but there are other engraving tools out there that will work with the Air 2.
@@KimandGarrettmakeit do you know if you would get the same or similar results? Wanting to have something that I can "diversify" with, but don't necessarily want to spend all the way up to the maker
I haven't tried it another machine. Looks like Chomas Creations makes one and it seems to have mixed reviews
Why is he always slapping air ghost? Why is he always swinging?
Wish the content was there without all the arm-waving drama, drove me insane
Thanks Angel! I can't help it. I am who I am. Thanks! ~garrett
Where did you get the yoda svg? Love the projects!
I think he found it on Etsy
Is that German?? 🤣I’m still laughing about that.
Well Santa didn’t bring me a Cricut for Christmas so I guess I will have to buy my own. Poor me. Lol!
I can’t wait to do projects like this!!!!
Awe! That's right girl, don't wait on Santa! Go get you one!
How does the cricut know where your material is on the mat?
Special cricut magic!
I did a tutorial on my channel on how to engrave a pie server if you and your husband want to check it out 🤷♀️😁 I want to do leather next!! Yall are awesome btw! 🥰
Thanks Paxton! We watched it! Lots of good information!
Wait a min u have 6 kids!! U said ur a clan of 8 Well 7 with Garrett. Lol can u guys link the material you used so we know where u got it from. And where u got the svg.
Lol, yes six kids and a Garrett! :) It's a crew! I think he added the tools used in the description and for the svg, just search Baby Yoda SVG on Etsy, there are a bunch of cute ones!
Do anybody know what kind of tape that is
I believe it's black masking tape :)
This was a great video to convince me NOT to buy this machine 😂
Glad I could help!
Very confusing video. I wished you showed your computer project...
Sorry this was a quick one