How to Engrave Acrylic and Metal with the Cricut Maker 3 Engraving Tool | Cricut Maker Series
HTML-код
- Опубликовано: 21 июн 2024
- ⬇⬇ Tap for INFO & LINKS ⬇⬇
If you want to use your Cricut Maker or your Cricut Maker 3 to its fullest potential, then you're in the right place. We are going to show you how to engrave acrylic and metal with the Cricut Maker 3!
When I first got my Cricut Maker 3, I was so excited about all the amazing things that only the Cricut maker could make. In my Cricut Maker series, my goal is to empower you to take full advantage of your Cricket Maker or Cricut Maker 3. By teaching you about all the tools and all the amazing things the Cricut Maker can do. In this video, I'm going to be focusing on how to engrave using your Cricut maker, which can engrave both in acrylic as well as thin and metal.
NAVIGATION✨
00:00 - Introduction to How to Engrave Acrylic and Metal with the Cricut Maker 3 Engraving Tool
00:48 - Cricut Design Space setting up engraving tutorial
05:42 - Adding the image to the engraving project in Cricut Design Space
09:57 - How to set up acrylic engraving projects on your mat
13:47 - How to engrave with your Cricut Maker 3
22:43 - How to set up metal engraving projects in Cricut Design Space
26:35 - Engraving metal with your Cricut Maker 3
29:40 - Finishing off the engraved metal bracelet
31:56 - Connect with DIY Alex
Other videos you may want to check out ⬇
Cricut Maker Series 👇🏼
• Cricut Maker Series
Engraving Acrylic LED Base with Cricut Maker 👇🏼
• How to Engrave Acrylic...
LINKS (May contain affiliate links) ✨
➡️ Engraving with Maker Blog Post - Coming soon!
Cricut Maker - amzn.to/3kaxgri
Cricut Maker 3 - amzn.to/3vSz0YF
Engraving Tip and Quickswap Housing - amzn.to/3lYbis6
Amazon Maker Tool Organizer - amzn.to/3IlEzoq
Acrylic Sheets from Michaels - go.magik.ly/ml/1ra5a/
Brayer tool - amzn.to/3IlfWYW
Impress Art Metal Bracelet Essentials Kit - shrsl.com/3xt8h
Other Blanks from Impress Art - shrsl.com/3xt8l
Shop my Cricut Maker Essentials on Amazon: www.amazon.com/shop/diyalex/l...
Click Here to Shop my Amazon Store: www.amazon.com/shop/diyalex
CONNECT WITH DIY ALEX ✨
Get the latest e-mail updates exclusively for my Crafty Fam: bit.ly/3zo4Vld
Join my Craft Resources Vault for freebies, downloads, checklists, and more!
diyalex.com/resources
Join my Facebook group for DIY Cricut Brides, Mother of the bride/ groom, bridal party, and Wedding Crafts!
/ cricutbridesandwedding...
Join my Cricut and DIY Facebook group for ALL levels of Cricut crafters!
/ cricutandcrafty
Let's be friends! Chat with me on DIY Alex social ✨
Facebook: / diyalexvanover
Instagram: / diyalexvanover
Pinterest: / diyalexvanover
TikTok: bit.ly/2xbb5ZW
For business inquiries, e-mail: diyalexvanover@gmail.com
*Affiliate disclosure: Links in this description could be affiliate links. If you click an affiliate link and make a purchase, then I may receive a small commission at no extra cost to you. Thanks in advance for your love and support! 💕*
HASHTAGS ✨
#cricutmaker #cricutdesignspace #diyprojects 
Развлечения
Thank you for making videos that are straight to the point and easy to follow. At my age I don't have the time or the patience for videos that are super long and filled with fluff. You have changed my outlook on the cricut and have motivated me to get back into crafting witch is my passion. Thank you and god bless
Those are my favorite kinds of tutorials to watch, so that’s what I make! I’m so glad they’re helpful for you!
Simple and to the point JUST WHAT I NEEDED!! THANKS
Just bought my Cricut Maker 3 today. I'm so excited!
Yay! Congratulations!
I talked to cricut before buying and they told me the maker was the stronger machine.
Suggestion… before buying a lot of items, or attempting your first project, watch a lot of videos, and there are a whole lot of them right here on RUclips. You’ll be happy you did. Happy crafting! 😊
I just bought my cricut maker 3 today and I can't wait to start using it
Thank you so much, concise and precise god bless you
I love the way you explain everything ❤
Thank you! ❤️
Well done thou good and faithful servant
Love this idea
thanks for the grear insight of the cricut maker
Thanks. Thread so fun
Alex, you are amazing. You beautifully explained the process and have a gifting for teaching. Thank you!
Wow, thank you!😊
This was a FANTASTIC video! Excellent instructions and to the point! Thank you so much!
You're so welcome!
I'd like to thank you for doing Tutorials that are very well explained and all points covered. I have followed a LOT of Tutorials and I find I get frustrated and press rewind constantly as i need to revisit what they have said. Your Tutorials are super easy to follow and understand and I have learnt a lot more from you than I have from anyone else. THANK YOU
You're very welcome! I’m so glad it was helpful ☺️❤️
Great video! Thank you very much.
Thanks for this video ❤. Thanks also for showing the bracelet even though it didn’t work out perfectly. That way we know what to expect
Glad it was helpful! ☺️
Thank you for your tutorial ❤
You're welcome 😊
That was awesome... Thank you so much 😊
You are so welcome!
I so need to upgrade from the joy, it’s great but limited to what you can do. The fact I can engrave has just sold it for me and you have explained it so simply!
It’s so much fun to play with the Maker tools! Though I do love my Cricut Joy too!
I did not know you could move the white wheels!!! That would have saved me a headache with a couple projects. Thanks for the info!
You’re so welcome!
Awesome 👍😎
Thank you for being the most succinct explainer! Really helped this newbie out ❤
I’m so glad it was helpful!
I only had time to watch a short piece of this video, but it was enough to get me to hit subscribe. Easy to follow. I don't have my machine yet so will wait until I get it so I can follow along. TY
Yay! Welcome to my Crafty Fam! Can’t wait for you to get your machine!
That was great
You are AWESOME!!
Thank you so much 🥰
I was wondering why my machine wasn't detecting my engraving tool...Thank you for explaining in depth!
You are a natural at teaching and sharing! New Subscriber here!!!!!!!
Welcome!! Thanks for subscribing! 💕
Thank you for sharing tutorial.
You’re welcome 😊
GOD bless you!
Cool
Bonjour, je ne sais pas si vous allez comprendre, merci pour ces explications, très joli projets❤❤
Great video, thank you! If you live in England like me, Hobby Craft has paid workshops where they teach how to use the Cricut. I'm definitely going to attend so I can learn with a professional in person.
We don’t have Hobby Craft stores here, but that’s awesome! I’m glad you have that resource!
You are so good at explaining things! Are you a teacher?
Thank you so much! No, I am not a teacher but I love to teach in settings like this!! ☺️
Awesome!! Another one for the list!
❤❤❤❤
Thank You for sharing this is there any other metal that I can use
Acrylic and different kinds of metal are all that I’m aware of!
❤
Nice and thorough instruction! I don't have my Cricut machine yet. For engraving, cutting leather and wood veneer do you recommend the Maker as the best machine?
Yes, the Maker/ Maker 3 is the only machine that can handle those materials.
What backing did you use behind your finished engraving, and how did you secure/apply it? Thanks!!
This is just a black piece of cardstock. I didn’t decide it, I just placed it on the same easel!
Just came to this video, love your tutorial. Got mine a year ago and never open the box, now I will. I did not get the information packet that’s why I came to you tube.
I hope this gave you some guidance! Welcome to the Cricut crafting community!
I’m COMPLETELY new to learning about all of this and don’t have a Cricut yet but looking to see what I need to get started with it.
Does the Cricket Maker 3 machine come with a quick swap housing tool or is that separate?
The Quickswap housing is a tool that you buy separately. :) Good question!
@@DIYAlex thanks!
The Cricut Maker does come with the QuickSwap Rotary Blade & Housing & Premium Fine Blade & Housing.
@@tonyalucz7226 the Maker 3 does not, at least not the one that comes without a kit. It’s compatible with it, but doesn’t come with one. I just received mine yesterday and it did not. The only thing the machine comes with is the fine point blade already installed in its blade housing, a scrap sheet of vinyl to do an initial test on an about 4 12”x12” sheets of various Smart Materials it try out. Nothing else came in my box, not even a marker or a mat like the original Maker comes with, but I purchased just the machine not in a kit and bought all my tools and supplies separately for it.
That was my way of asking you to make one.
Hi, what is the thickest metal item you can engrave. I was wondering if you can engrave a metal square lighter
No, you will only be able to engrave flat metal blanks. You would have to use a laser to engrave a lighter, and I'm not sure how safe that would be so you would want to find out more information before trying that.
I have the Maker 3 with the Cricut engraver tool. I set up my project and secured my acrylic to my cutting mat. When I went to select the acrylic it showed the 2mm acrylic and the1mm acrylic, but they were not selectable. It said they were not compatible with my hardware. I spent hours trying to get it and I was ready to throw the maker on the floor. My firmware and software are both up to date. Any suggestions???
Make sure the operation is set to engrave for all your lines. That should fix the issue!
Better to use painter's tape to remove dust. You should also use alcohol wipe when your done. Keeps down the mess and looks much better.
P.S. You also won't have the dust left on your mat.
I love the alcohol wipe tip!! That’s a great idea.
@@DIYAlex Actually the painter's tape does more than the alcohol! Keeps dust off your mat and your work space!
Can you use Snapmat for engraving?
I don’t think so, but I could be wrong about that!
I got that tool holder
I love it!
How long did that take to engrave?? Thank you!
This design took 20-30 minutes
Hello Alex, thank you for the video...I am about to get Cricut Maker 3, is there a beginner video on how to cut cake toppers (ie greetings and names)?, please kindly....many thank you so much!
Sure! Here’s a tutorial: ruclips.net/video/pBVYw7BwHjQ/видео.html
Where can I find the weeding pen you use in the video?
You can find it in several colors here: www.143vinyl.com/vinyl-tools/?partner=403469
if I wanted to add foiling to the engraved designs would I just lay the foiling of the design and essentially redo everything with the heat foiling pen?
Foil won't stick to anything but cardstock unfortunately!
Hiii ! quick question, I just bought the cricut maker 3 because my cricut maker was not working anymore, I am having trouble with the engraving tool, my cricut maker 3 wont detect it, i already restarted both my laptop and my machine but it wont detect. Is there anything youd recommend ?
I would contact Cricut customer service in case it’s a faulty machine! Especially if your machine is new.
Can you engrave both sides of the bracelet?
Yes
My Maker acrylic blank from michaels says 1.9in but when i load into my maker 3 it makes a horrible sound like its too thick??? Is there another adjustment i should be doing?
1.9 inches is way too thick for the Cricut Maker. If it’s makes a bad sound definitely stop and reevaluate.
Unfortunately it coming from Michael’s doesn’t mean it’s going to be compatible with the Maker.
Do you know if anyone makes an engraving tip with a diamond and not steel a carbide ? Thanks
I would be very surprised if you found this tool. I haven’t heard of anything like that.
I bought a engraving tip but it doesn’t reach all the way down to my metal. It makes the cutting motions but doesn’t cut nor touch my metal, please help
Is it a Cricut engraving tool? Are you sure it’s seared all the way down in the holder?
Hi Alex, I clicked on both links for the metal bracelets and they are not working.
Ok I will work on that! Thanks!
I would be so worried about the acrylic or metal dust getting down inside the machine. Is that an issue ever?
I’ve never heard of that being an issue
شكراً😂
Can you show with moulds with different weights.for the earrings not just engrave.
I’m not sure what you mean since I didn’t use earrings in this video.
U can still do this on the marker though right
Yes, the Maker and the Maker 3 can both engrave!
@@DIYAlexCan the exploere 3 engrave?
Could the bracelet engraving alignment have anything to do with the blank being positioned under the line and not actually on it?
That could be it!
@@DIYAlex is the blank supposed to be placed ON the line or right underneath it? I’m so new to all of this and just learning!
Hello! The Cricut machine I have is the Explore Air 2. Do you think/know if I'll be able to do those projects using my machine?-Thanks
Yes you can! here's a tutorial: ruclips.net/video/JaEbsMEkadI/видео.html
I am having a problem getting the switch from one to another.
What are you having trouble switching?
Hi Alex another youtuber had their engrave centered on the 6 inch cross hair in the middle of the mat and also 6 x 6 (in the middle) of design space. Hope this helps.
Thanks for the suggestion!
I have set-up all my materials the same way but for some reason it won't let me select acrylic. Is there a work around? I receive a. message that the tool is not compatible with this material.
Is the operation set to engrave? That’s the first thing I would check
@DIYAlex yes its set to engrave and it won't allow me to select acrylic
Did you figure out how to center the type on the bracelet?
I show you how in the video :)
As expensive as this thing is all of these tools should be included.
Unfortunately that’s up to Cricut, not to me!
@@DIYAlex For sure. I didn’t think it was up to you, just making an observation seeing that there’s a tool for everything 🤗
cn i use this engraving tip with cricut explore 3
No it's not compatible.
Gottes Reichsten Segen für dich und deine Familie 🙏🙏🙏
Here’s an idea maybe tell your viewers before the video starts that in order to engrave with the maker 3 you will need a special tool. Cause that was 15 minutes of my life wasted
The title of this video is "How to engrave Acrylic and Metal with the Cricut Maker 3 Engraving tool", so I'm not sure how you missed that.