I’m close to buying a BRZ and would love to boost it. I’m leaning towards a turbo kit since a BRZ fits more into the “JDM” type feel of a car. I’m glad I found this video!
Nice build. Clutch wise definitely go with the south bend stage 3 and stock flywheel. That’s what I’m using with my JDL Turbo kit w/GT3076R. Holds great and drives like stock.
Ya I actually have right now southbend stage 2 daily clutch then stock flywheel. So ya def gonna have to upgrade to a little beefier clutch! I’ll look into that clutch tho
I think $5500 is more than enough to put full turbo kit + clutch, Fork, oil cooler, oil catch can. I got one about 320hp JDL headers Garret turbo Bosch injectors AEM oil pump etc with all the stuff needed to handle that power safely not thinking the forks won’t handle or the clutch isn’t built for that power heat etc it toke about 3.5k US dollars
Best to raise your oil up to 5W-30 not the OEM OW-20 because that factory oil is thinner and won’t be able to handle high heat with turbo or supercharged. Done it for 3 years without a hiccup.
Ah good question! Kept my stock fans and just used a dremel to trim a piece of the stock fan. It doesn’t hurt the fan whatsoever still functions exactly the same. But it granted me the clearance I needed for the turbo and also for the turbo blanket.
"I DON'T KNOW" IS NOT A SUBSTITUTE FOR NOT BEING PREPAIRED TO MAKE A VIDEO. YOU LEFT OUT DETAIL INFO. IF YOU ARE GOING TO TITTLE YOUR VIDEO " EVERYTHING YOU NEED TO KNOW BEFORE BOOSTING YOUR BRZ" YOU BARELY MADE IT THROUGH BASIC INFORMATION. IT SHOULD HAVE BEEN TITTLE "A LITTLE BIT OF WHAT I THINK I KNOW ABOUT BOOSTING SOME CARS BUT I'LL HAVE TO CHECK ON IT"
Detailed* Title* Titled*. He went over the basic information points, the things he did to prep for the boost, and things you should do/avoid doing to not make the same mistakes. Thank you for leaving a comment to boost the channel :)
@maxmodenessi314 if you knew what you were doing, you wouldn't be here hating on a kid 😂 so are you mad at him half assing a video or yourself for not being able to do your own research?
I’m close to buying a BRZ and would love to boost it. I’m leaning towards a turbo kit since a BRZ fits more into the “JDM” type feel of a car. I’m glad I found this video!
Good luck boxer engines Can deal that much power
Do you have a complete parts breakdown? I have my 2013 brz and am ready to give it the love it needs
What a nice build man! Definately learned some important things about being boosted here, thanks. 👍
Thank you brotha! I appreciate the positive feedback! What else would you want to see with the brz? Also if you haven’t already! Consider subscribing!
I literally can't wait for the pov. This car sounds awesome
Coming out today! Working on the video right now should be out around 5pm EST! Set the notification bell on for a reminder!
Can’t wait till I turbo my brz looks fun to drive keep up the good work bro 🔥
Thank u bro! You won’t regret boosting it trust me!
Why does the thumbnail look like Scotty Kilmer 😅
Best informational video I’ve ever seen
Thanks for editing this babe you the best 🥰😎
Nice build. Clutch wise definitely go with the south bend stage 3 and stock flywheel. That’s what I’m using with my JDL Turbo kit w/GT3076R. Holds great and drives like stock.
Ya I actually have right now southbend stage 2 daily clutch then stock flywheel. So ya def gonna have to upgrade to a little beefier clutch! I’ll look into that clutch tho
@@Johnncasella yep stage 3 daily check it out. It’s rated to 400 ft/lbs so plenty of room to grow.
Absolutely sounds like a good idea
Appreciate the knowledge bro
I think $5500 is more than enough to put full turbo kit + clutch, Fork, oil cooler, oil catch can. I got one about 320hp JDL headers Garret turbo Bosch injectors AEM oil pump etc with all the stuff needed to handle that power safely not thinking the forks won’t handle or the clutch isn’t built for that power heat etc it toke about 3.5k US dollars
Unless you’re installing it yourself I’d double that for all the labor put ib
Best to raise your oil up to 5W-30 not the OEM OW-20 because that factory oil is thinner and won’t be able to handle high heat with turbo or supercharged. Done it for 3 years without a hiccup.
New rods, install kit, get new tires, tune.
how do you tune it?
Great job johnny
Thank you Tasha👍
She’s a real one 🤝
thanks tasha
You got yours for a decent price. I'm looking at 10-12k to boost mine.
What kind of MOTUL oil you run? Thanks, sweet, sweet build bro!
Motul 300 V
My bad didn’t ask what for. This is for trans and diff
And how did you get your third brake light to be so bright in the middle? You could see that thing project onto the asphalt in daylight!
Lol good question I just plugged it in! Hahah
9:20 REALLL 😂
Did you use the stock fan or get some slim fans? I’m concerned about not being able to fit a blanket with the stock fan fitment being so tight!
Ah good question! Kept my stock fans and just used a dremel to trim a piece of the stock fan. It doesn’t hurt the fan whatsoever still functions exactly the same. But it granted me the clearance I needed for the turbo and also for the turbo blanket.
@@Johnncasella legendary! Think I’ll do the same. Picked up my jdl kit a couple weeks ago, gonna install in the spring. Nice ride bro!
Nice man any questions let me know!
@@Johnncasella what turbo blanket are you running? I’ll probably grab the same one!
I got this one: PTP Turbo Blanket T3 Lava, this one fit perfectly for my turbo size. Which is a Garrett turbo gt2860rs
hiw many yoy payed for this i want bosst mine
What year is your brz bro ?jw
Mine is a 2013
"I DON'T KNOW" IS NOT A SUBSTITUTE FOR NOT BEING PREPAIRED TO MAKE A VIDEO. YOU LEFT OUT DETAIL INFO. IF YOU ARE GOING TO TITTLE YOUR VIDEO " EVERYTHING YOU NEED TO KNOW BEFORE BOOSTING YOUR BRZ" YOU BARELY MADE IT THROUGH BASIC INFORMATION. IT SHOULD HAVE BEEN TITTLE "A LITTLE BIT OF WHAT I THINK I KNOW ABOUT BOOSTING SOME CARS BUT I'LL HAVE TO CHECK ON IT"
Detailed* Title* Titled*. He went over the basic information points, the things he did to prep for the boost, and things you should do/avoid doing to not make the same mistakes. Thank you for leaving a comment to boost the channel :)
The rages here is palatable lol
U mad bro?
@@N8_360 yeah very
@maxmodenessi314 if you knew what you were doing, you wouldn't be here hating on a kid 😂 so are you mad at him half assing a video or yourself for not being able to do your own research?
Real ones know oem filters are jus rebranded filters from other companys
Thank you, nonetheless.
🔥🔥🔥
Aye bro appreciate u!
Nice build, nonetheless.
Thanks!
Got yourself a cool wife
😂😂😂 None the less
I say it entirely too much lmao it’s my thinking word essentially lmao! Whenever im tryna think I say that as a buffer word
Nonetheless
Hi Beautiful Tasha
Hell naw I think I’m gonna go with the m4