@@pingchen5291 E30 is the new Yaris. I mean... In MCM lore. 😅 Seriously though, MCM never was a show about restoring cars and rust free E30's are becoming quite rare and expensive.
A performance clutch doesn’t offer much improvement without power adders, but a light weight flywheel makes a pretty big difference, especially on such a light car. Can’t wait to see what power mods you do!
“We don’t use a lift cuz most of you don’t have one”. *Gets lift and realizes how freaking amazing it is* “Yeah we’re just gonna use it here and there.” *starts to use it almost every video*
@@Adlore dudes right. If its in orbit its already doing 17,500mph+ so already pretty fast (for a brz). No dropping required. Although dropping off a cliff is probably an all-round improvement to the drive train which has as much power and torque as my 9 year old borsch drill.
You guys have got me through so much in my life. As someone that hasn't been able to work on cars I've watched since the start. This year you've got me through the loss of my grandmother. I don't know if either of you will see this. On the off chance you do. I want to say thank you for all that you do. Hope to one day be working on cars in a garage with a friend too.
He only has no idea if they are working on Moog's car. If its his car or a joint project kind of thing he does. Otherwise he always goes wait what do we need to do? 🤣🤣
in 1960 when I put together my hot rod. I bought a borg and beck 10 and 1/2 inch truck clutch(with the coil springs) for my 283 engine. worked perfect. a good clutch is very important.
I just do not know if I can properly express how much I like the helping feet. I’m also a huge fan of the awkward handshake. Straight up the kind of attention to detail I watch this channel for.
The best thing about this channel, how stable the camera is when filming and editing. A lot of other stuff I watch on RUclips, I feel like I'm both seasick and epileptic at the same time, from the person filming the action and constant jump cuts.
looking at a GT86 myself and was thinking of supercharger as well since massive Initial D fan and there is no way i can ever afford a AE86 or a 22B / 2d Sub. but the new GT86 makes appearances as a future Takumi in the Legends movies.. which means i also want a white GT86 :)
Finally finished setting up the turbo/tune on my 99 Celica that's been through a RWD conversion and semi-built 1GR V6 swapped. I've been running it NA since getting it running and rolling under its own power and it's been fine (pushing 315rwhp/320lbft of torque on pump gas NA) but I did destroke the engine, throw in upgraded pistons, and went over the heads/valvetrain for turbo. I'm sitting at around ~405rwhp and ~415lbft of torque now with room to go but honestly it doesn't need it, the Celica is a really light chassis, the 1GR being all aluminum construction is fairly light too. Hell I've done a 2GR swap keeping the FWD in boredom after getting a cheap totaled Camry, running damn near 300hp to the front wheels in that chassis is still stupid fun. One of these days I might do some BRZ/86 stuff for myself instead of just for jobs, it'll have to get cheaper before I do that though. That and I'll have to run out of Celicas/MX-6's.
one of the things I love about MCM is that they are so real, by that I mean they put a car on the hoist and there is still mud all over the wheels like there would be for anyone else. They don't fake it by polishing everything to make it look pretty for the video.
9:55 to 10:07 is the perfect sequence of attempting to follow the book without the special tool, coming up with a better idea than what's in the book, and then saying "screw it, the impact always works".
I recommend the Whiteline transmission mount bushing and the Perrin shift bushing while you're already under there. Just recently added them and its such a cheap and great mod
@@mbsnyderc that trans also wouldn't mount up to a v8. That's generally why when you do a v8 swap, you replace the trans as well. Just in case you didn't know. My comment was meant to be funny, because a nitros v8 superturbo is a very Australian thing to do to a car.
They will wish you upgraded the clutch fork as well. These are known to bend with stiffer pressure plates. Gradually the clutch will feel like it doesn't disengage, until you can't.
DJ EDWARDS why did you take your bong out of the car? Surely you have it securely mounted so it doesn't spill when going over roundabouts or speeding through red lights?
what i do when im torquing flywheel bolts, or removing them, is reinstall one of the bellhousing bolts with the box end of a wrench on it. line the open end of the wrench up with those hardened steel dowels, or install a bolt into the flywheel to butt the wrench up against. ive done this for ever, and its such a valuable trick when you're working by yourself.
On a hoist it looked so much easier, doing it in the middle of winter on a freezing cold floor was always going to be a bad idea 😅 but bench pressing a gearbox was fun
Moog, that song around the 5:00 mark is among my favorites of yours. I really like the electronic beat. I grew up in the ecstasy and rave party scene, so I have always been a fan of drum and bass, house, some trance, and basically most forms of electronic music. I'm a big fan of your work brother.
The lightened flywheel will put a smile on anyone's face. It's amazing what such a simple upgrade will do for the drivability. At least when I put one in, it was a night and day difference.
@@cradilyz couldn't say for sure on a brz. I would think so but if it's a higher end brz, it may already have the optimal flywheel. If I said yes, I'd be blowing smoke.
@@mikeycage1587 have a brz and unsure if i should just machine the oem flywheel or pay for the light weight, i drive it everyday and do sit in traffic, im pretty happy with it atm so wouldnt wanna make any sacrifices QOL wise
Talking about an early clutch job, I had a 2001 v6 mustang, one of the easiest transmissions I’ve ever pulled. Unbolt the trans from the bell housing makes the bell housing bolts easier to get to. Had the trans out and throw out, new throw out bearing in and trans back in under just 3 hours.
I’ve always loved the edits but I am quite partial to the older cuts. Always informative and with sick tunes and voice overs. Very entertaining as always.
One thing to remember when doing your own clutch or flywheel is to spray it down with some brake cleaner before installing. But anyway love the show guys. All the way from Seattle
That song is hilarious.... i’ve never worked out if it’s meant to be ironic, or serious or satirical. “I’ve got something to stick in you... at the g*y bar, g*y bar, g*y bar!” Is it a knife, or...??
A stock US AE86 used to weigh about 2830 pounds. Some guys knocked that down under 1800 pounds just by pulling gear. Fast way to make a car faster without spending money.
Audi (NSU) were the first to make production cars with them and licensed the technology to Mazda. Mazda later refined it as much as they could and then they became popular. I would argue it isn't really cheaper than a BRZ because of reliability, maintenance and so on. But it would be cool to see. Too bad we will never see them in a production car again.
![How To Turbo Your Car [IN ONE DAY!!]](http://i.ytimg.com/vi/E2Y-FXt7QAo/mqdefault.jpg)
![How To Turbo Your Car [IN ONE DAY!!]](/img/tr.png)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
20% more clutch grip means your expecting 20% more power, you know what that means? cold air intake!
Hell yeah and he will have that mad 1 hp gain.
they are going to paint the calipers red for the other 15%
Oh come on we all know that potato in the exhaust makes way more power then an intake
Had us going in the first half, not gonna lie
Nah, red brake calipers add 20%, no need for that fancy schmancy cold air intake stuff!
There's something extra special about having the opportunity to watch MCM working on the car you own.
what car is this?
@@ImKarma10 FRS/GT86/BRZ/86
"A flywheel should never actually fly", wise words from Marty right there
The people hype about the Initial D in the background don’t remember how much these guys like fucking with us. I remember the E30 tease lmao
Yea I wanted the e30 tease to be real lol
It might still be on the books for later in their long term plan...
@@pingchen5291 E30 is the new Yaris.
I mean... In MCM lore. 😅
Seriously though, MCM never was a show about restoring cars and rust free E30's are becoming quite rare and expensive.
also, there literally was a panda trueno in the last video(where they raced on the track).
@@jort93z That was an open track day.
A performance clutch doesn’t offer much improvement without power adders, but a light weight flywheel makes a pretty big difference, especially on such a light car. Can’t wait to see what power mods you do!
Who’s your camera man? I reckon he needs a shoutout for how good me makes you two look. 3 professionals just killing it
He got introduced in the episode where they saved Moog's Motorcycle from the forest I believe.
Just search for "Rescuing My Abandoned Motorbike".
I always feel a bit seasick with the static shots. The constant sway 🤢
Ross Bourne can someone tell me the joke about Cheryl hahaha I always here them joke about it but I don’t get the reference
Scott Boswell She was Marty’s old girlfriend who made him give up the March SuperTurbo waaaaaaaaaay back in the day. If I’m not mistaken.
Bump
Can’t wait for the K swapped MR2. They are so much fun.
and dangerous/sketchy
Could be k swapped Gemini
Anything k swapped with these guys will be awesome, honestly.
@@songswithoutcorey5961 I think you're right. He even said in the Gemini video that he wanted an NA four cylinder
I love my Toyota 5k but I think they're a bit outdated... 🤪
“We don’t use a lift cuz most of you don’t have one”.
*Gets lift and realizes how freaking amazing it is*
“Yeah we’re just gonna use it here and there.”
*starts to use it almost every video*
I dont blame them. I'd use one too
I never had the privilege of using one until I met a professional mechanic and totally understand the shift lol. It makes everything so much nicer.
I’ve got one so it’s now ok for them to use one as well.
They've had enough years on their back...👀👀👀👀👀👀
My dad has one that i use. I love it and dont blame them.
Make the brz fast, put it on a trailer behind super gramps lol
Roll it over a cliff?
Drop it from a low orbit?
just Tesla swap it
@@jacobhutchby5791 technically it'll just stay in low orbit when you drop it, albeit it's still fast
@@Adlore dudes right. If its in orbit its already doing 17,500mph+ so already pretty fast (for a brz). No dropping required. Although dropping off a cliff is probably an all-round improvement to the drive train which has as much power and torque as my 9 year old borsch drill.
You guys have got me through so much in my life. As someone that hasn't been able to work on cars I've watched since the start. This year you've got me through the loss of my grandmother. I don't know if either of you will see this. On the off chance you do. I want to say thank you for all that you do. Hope to one day be working on cars in a garage with a friend too.
"we are going to make the br zed fast" 2 seconds later "what are we doing" "making it fast" marty never has any idea what is going on and i love it
He only has no idea if they are working on Moog's car. If its his car or a joint project kind of thing he does. Otherwise he always goes wait what do we need to do? 🤣🤣
in 1960 when I put together my hot rod. I bought a borg and beck 10 and 1/2 inch truck clutch(with the coil springs) for my 283 engine. worked perfect. a good clutch is very important.
I love the initial D playing in the background... homage, or foreshadowing? 🤔
Dun dun dunnnnnn
haha I came down to comment the same thing!! I mean makes sense, the brz (gt86) is like the revival of the AE86
@Rylee Small rear wheel drive sports cars? Pretty similar
I just got done watching up until stage 5
Upgraded 86 vs a blue Mitsubishi :oooo
I just do not know if I can properly express how much I like the helping feet. I’m also a huge fan of the awkward handshake.
Straight up the kind of attention to detail I watch this channel for.
12:00 I dont know if you were trying to constantly interrupt marty but that was funny as hell XD
He was definitely doing it on purpose.
The best thing about this channel, how stable the camera is when filming and editing. A lot of other stuff I watch on RUclips, I feel like I'm both seasick and epileptic at the same time, from the person filming the action and constant jump cuts.
NEW JDM TSHIRTS
mightycarmods.com/collections/clothing/products/japanese-adventure-institute
When Turbo Yoda?
wwwwuuuuuuuuututututu xD
Supercharger for more low end torque would be awesome af.
looking at a GT86 myself and was thinking of supercharger as well since massive Initial D fan and there is no way i can ever afford a AE86 or a 22B / 2d Sub. but the new GT86 makes appearances as a future Takumi in the Legends movies.. which means i also want a white GT86 :)
Sex spec exhaust its so nice it looks moist even when it's not
Finally finished setting up the turbo/tune on my 99 Celica that's been through a RWD conversion and semi-built 1GR V6 swapped. I've been running it NA since getting it running and rolling under its own power and it's been fine (pushing 315rwhp/320lbft of torque on pump gas NA) but I did destroke the engine, throw in upgraded pistons, and went over the heads/valvetrain for turbo. I'm sitting at around ~405rwhp and ~415lbft of torque now with room to go but honestly it doesn't need it, the Celica is a really light chassis, the 1GR being all aluminum construction is fairly light too. Hell I've done a 2GR swap keeping the FWD in boredom after getting a cheap totaled Camry, running damn near 300hp to the front wheels in that chassis is still stupid fun. One of these days I might do some BRZ/86 stuff for myself instead of just for jobs, it'll have to get cheaper before I do that though. That and I'll have to run out of Celicas/MX-6's.
"take me to the swaybar,swaybar,swaybar" MAAAAD guitar solo starts on the background ;D
one of the things I love about MCM is that they are so real, by that I mean they put a car on the hoist and there is still mud all over the wheels like there would be for anyone else. They don't fake it by polishing everything to make it look pretty for the video.
"turbo Yoda will this clutch fit on my honda"
*unimpressed blank look intensifies*
Only if it is K swapped 8)
9:55 to 10:07 is the perfect sequence of attempting to follow the book without the special tool, coming up with a better idea than what's in the book, and then saying "screw it, the impact always works".
I recommend the Whiteline transmission mount bushing and the Perrin shift bushing while you're already under there. Just recently added them and its such a cheap and great mod
Can we just appreciate how much the production value has improved since the old days. Crisp :D
"This is where v8 swaps, supercharging, nitros and turbocharging come into the picture"
Me daydreaming in nitros v8 superturbo swap...
That isn't happening that trans won't take the torque of a turbo V8.
@@mbsnyderc that trans also wouldn't mount up to a v8. That's generally why when you do a v8 swap, you replace the trans as well. Just in case you didn't know. My comment was meant to be funny, because a nitros v8 superturbo is a very Australian thing to do to a car.
Nahh make it an electric like Tesla. It'll be much faster
@@radityaindera3442 honestly would love to see an electric car project.
@@Quantum- Only if it's the Last Of The V8s.
Yesss supercharger Easter egg @18:10, so keen! Great video been watching for years first time commenting!
They will wish you upgraded the clutch fork as well. These are known to bend with stiffer pressure plates. Gradually the clutch will feel like it doesn't disengage, until you can't.
You guys by far have the best music in the whole RUclips channels keep it up
“This car will not get a turbo”
Us: 😏
Eyeroll and a wink all at the same time.
1 week later... 😂
Even their transmission jack has VTEC
but did it kick in yo?
I'm so happy they are modding the BRZ, can't wait too see how far they go. I wonder who the Super Yoda will be!
These video's truly are brilliant. Very informative, high quality and a good laugh. You boys need to keep this coming.
Thanks mate!
"I've got something to put in you. At the sway bar, sway bar, sway bar!" Bwaaahh stutututu
Aaah yes a man of culture! #ElectricSix
Actually read this to the proper tune and everything
Feel like a lotta people missed that one
lol "are ya cold?"
it may be winter where you guys are but where i live we are in the middle of a heat wave with a few record breaking temperatures
Weather in a lot of Australia is about what Western WA is this week. And I considered it hot lol
It's quarter past midnight here! Oh well...
It's 01:22 here.. 🤸
Badly timed. Not even chasing midnight. Unless it's with some shots.
Uk gang where you at
Same man 🇮🇪🇮🇪🇮🇪
7:35 here in Tennessee
I don't care how many times I hear it, that bass drop in Horizons ALWAYS hits me just right.
Perfect 9:20 in the morning I just opened my eyes grabbed my bong from my Nissan ready for breakfast an to watch the brz go fast
DJ EDWARDS why did you take your bong out of the car? Surely you have it securely mounted so it doesn't spill when going over roundabouts or speeding through red lights?
How to make babies with MCM: “Drain your gearbox before you pull the thing out”
Don't forget "Giving the gearbox a little wiggle to get it off."
Important step.
---Just my two cents.
"Hold on ill get it up near your face, takes a long time to get it up doesn't it" 14:39
what i do when im torquing flywheel bolts, or removing them, is reinstall one of the bellhousing bolts with the box end of a wrench on it. line the open end of the wrench up with those hardened steel dowels, or install a bolt into the flywheel to butt the wrench up against. ive done this for ever, and its such a valuable trick when you're working by yourself.
On a hoist it looked so much easier, doing it in the middle of winter on a freezing cold floor was always going to be a bad idea 😅 but bench pressing a gearbox was fun
Moog, that song around the 5:00 mark is among my favorites of yours. I really like the electronic beat. I grew up in the ecstasy and rave party scene, so I have always been a fan of drum and bass, house, some trance, and basically most forms of electronic music. I'm a big fan of your work brother.
Initial D casually in the background during the "intro"
I am the cool kid from Germany making videos for the USA and the rest of the world. I will make your day so don't say nay to my videos today, dear pan
@@AxxLAfriku You seem desperate advertising your channel on someone else's content. Don't even get me started on your content.
@@AxxLAfriku Your videos are pure cancer.
At what time?
The lightened flywheel will put a smile on anyone's face. It's amazing what such a simple upgrade will do for the drivability. At least when I put one in, it was a night and day difference.
on a 86/brz?
@@cradilyz couldn't say for sure on a brz. I would think so but if it's a higher end brz, it may already have the optimal flywheel. If I said yes, I'd be blowing smoke.
@@mikeycage1587 have a brz and unsure if i should just machine the oem flywheel or pay for the light weight, i drive it everyday and do sit in traffic, im pretty happy with it atm so wouldnt wanna make any sacrifices QOL wise
Love your content Mighty Car Mods, you inspired me to start my own youtube channel.
Thank you for motivation.
Moog thank you for the music you've creates over the years I love you🖤
"Are you cold?" Moog goes as I put my thermals on, talk about good marketing.
Talking about an early clutch job, I had a 2001 v6 mustang, one of the easiest transmissions I’ve ever pulled. Unbolt the trans from the bell housing makes the bell housing bolts easier to get to. Had the trans out and throw out, new throw out bearing in and trans back in under just 3 hours.
Who else has seen more BRZ's on the roads lately.
*started noticing BRZs
They r getting cheaper. Since there's newer ones out. Best cheap modern chassis atm
yea, they are dog shit and slow so everybodys getting them... i reckon they'll sell for around 5-6k in a couple years
Baader-Meinhof phenomenon
EnzedDev not dog shit just slow
Started watching mcm in lock down, totally addicted and love the guys! Wish they were my brothers, the could fix my subaru then.
Welcome
When ever helping a friend open a package ALWAYS cut towards your friend
' cut towards your buddy , not your body '
Cut towards your chum, not your thumb -Ave
I’ve always loved the edits but I am quite partial to the older cuts. Always informative and with sick tunes and voice overs. Very entertaining as always.
“Clutch works” I feel attacked, my clutch just went out on my FRS today lol
LucFal Your car got offended and shit a clutch.
Throw out bearing?
well at least now you know how easy it is to do
Hotwheels heard the throw out bearing first, clutch stopped engaging shortly after. I’ll fix it, the timing was just really unfortunate.
Hotwheels you mean thrust/release bearing I think 🙈🙈
omg look at them, didn't watch them for years and now this video made on my birthday, i love it
12:05 Marty's other car is the Gemini. That would be awesome with a K20.
Sorry but im pretty sure its Mr. Poo! K swaps are plentiful in them! And make it so much better.
@@Rev.Match.Reviews What about all the teasing they did about the e30? Could be that too.
I've been waiting for the Opel Kadett to return! :D
I think it's an ae86
Holy shit...! If everyone in the world just had a sliver of the amount of patience Marty does....
the word "brz" actually means "fast" in Serbian/Croatian/Bosnian 😂
Huh, but it's slow....so
@@oneradmofo7624 it all depends on the car's purpose. Fast on the track maybe?
@@KarloVl golf dvojka :)
@@duxxxhm i to dizl! 😂😂😂
Are u for real tho?
How would u even pronounce BRZ
@12:19 how is Marty so patient with all of Moog's drama? 🤣
Love all the drama and little jokes here and there ❤
Double act
I had a feeling I wasn't the only one who saw initial D in the background
Can't wait need more mcm video lol keep them going better then most if not all car shows on tv in canada
This upload time is unsociable for us in the UK haha
what legends, I watched the NASCAR race went sleep and now wake up to this and its my day off from work life couldn't be any better right now
Marty "A Flywheel shouldn't ever actually Fly" had me rolling on the floor...
I love the unspoken innuendos, a prefect blend of nerdy car excellence and comedy
Initial D running in the background at the beginning xD
One thing to remember when doing your own clutch or flywheel is to spray it down with some brake cleaner before installing. But anyway love the show guys. All the way from Seattle
God I love this music..............please let moog be my heavenly music when I pass!! Chop chop
The production you blokes are putting into every episode is epic. Can't tell you how pleasing it is on the eyeballs and earballs!
Im still waiting for the collab of the century:
Mighty Car Mods + Donut Media
love from the U.S. guys always look forward to your videos!!!
You guys should do another collaboration. Its been a long time sine the roadkill episode...maybe Cleatus McFarland colab
Have you not noticed that no one is allowed to travel internationally - or even interstate in Australia (more or less) at the moment?
These guys are too cool for Mick Farmland....
Going to be waiting a while longer on that one me thinks. I am sure it will be worth the wait when it does happen.
Lets hope its with a young noodle eater that talks for 30 minutes and does 5 minutes work. Moog loves them type of youtubers
@@DIGPLatinodriftking1 macfarland fabrication ftw
5:19 still one of the best all time driving songs ever just in case any noobies didnt know yet
What’s the song
@@rvge7932 think it's moog
Who else went looking for a little sign that says “Hi Cheryl” at 3:59 lol
4:11 Marty just says "Cheryl"
I love that you already told us what's going to happen; makes it much more enjoyable to keep up with and increases my anticipation :)
"I want to take you to the sway bar, sway bar, sway bar, whoo!"
Sway bar- Electric 86.
😂😂😂😂
That song is hilarious.... i’ve never worked out if it’s meant to be ironic, or serious or satirical.
“I’ve got something to stick in you... at the g*y bar, g*y bar, g*y bar!”
Is it a knife, or...??
@@pingchen5291 Probably up to the listener to decide what THEY think. Like Rammstein songs.
That Subaru BRZ 86 going to be really fast Good job Marty and Moog 👏👏👏👏👏
The k series must be going in the Gemini as they did say it’s black and that car didn’t have a motor
Hint JDM🙃
I was thinkin K series in the MR2 but I forgot about the Gemini
Bearrett 50 Kal if you watch the Gemini video to they say there going to do it in 2020
Enjoying the MADNESS of these new video!!
Is this a first? MCM bringing the clutch up to spec before burning it off with a turbo.
Can't wait for the next video! Falling in love with that BRZ
I’m clicked as fast as my internet would allow
Same, but my Internet is rubbish and took 10hours
Still watching these hilarious vids. Best part, the soundtracks, love the music and it's regularly playing in my A3.
"I'm gonna take you to the sway bar, sway bar."
I'm from America and I watch you guys so much. When I read the title in my head I pronounce it br Zedd instead of BRZ LOL
DON'T TRUST HER TAKUMI! THERE IS A GUY WITH A MERCEDES! THE CAN!
So happy that Horizons made a comeback. Great song. My current favorite.
Hey guys who films your videos? Who is holding the camera?
Subaru Jesus
Not Cheryl...
Just ordered my first MCM accessories being shipped to Athens Greece!
Did he take the brz mudding??? Dirt all over the tires!
Rain+the garage in a remote location
@@shidous Guess that makes sense. Just doesn't get near that muddy where i live.
love to see that you guys enjoy what you do!!
K 24 swap MR2
Or the BMW that we all saw the repair manual for. Either way it will be MAAAADDDDDD
The other car is obviously the Gemini. Needs a short engine and a K20 would be perfect.
HELL YESSS!! Exciting news, BRZ gunna be 'Choo-Chooing' soon! Soundtrack on point as always, great work Moog! :)
So you're saying, working on this car is a BReeZe?
-_-
Sorry.
A stock US AE86 used to weigh about 2830 pounds. Some guys knocked that down under 1800 pounds just by pulling gear. Fast way to make a car faster without spending money.
I must be the only person who’d not figured out the Gemini was getting a K swap haha
Can't wait for all new episodes
Plus the color of that brz exhaust 😍😍
"Its almost enjoyable to work on!" Its because RWD is generally much better to work on lol
Unless its rear engine like an MR2
highway crimes, collide and flee the city are moog jewels. deserve a spot on any driving playlist
Guys, when are you going to get your hands dirty with a rotary?
1. They're as JDM as it gets
2. Cheaper (and faster) than a BRZ
3. BRAAAAP
@L W No need. They can just park it up next to Yaris Hilton when it blows.
@@GuyBrooke why buy a car if they're just gonna park it as soon as they buy then?
Audi (NSU) were the first to make production cars with them and licensed the technology to Mazda. Mazda later refined it as much as they could and then they became popular. I would argue it isn't really cheaper than a BRZ because of reliability, maintenance and so on. But it would be cool to see. Too bad we will never see them in a production car again.
DJ Moog is KILLING IT!!!!