Stereo Death Metal Guitar Rig | TC Electronics Mimiq Doubler My Favorite Death Metal Guitar Rig #2
HTML-код
- Опубликовано: 26 авг 2024
- This video is a followup to a video I did a couple of years ago. Link below. When you're the only guitar player in a band you need a full sound. I find that running a stereo rig helps with that. I used an SM57 and an SM58 panned left and right.
My favorite Death Metal guitar rig #1
• Peavey 5150 | Peavey 6...
www.dangatesmetal.com
Mutual Hostility-Sacred Propaganda full EP stream
• MUTUAL HOSTILITY - SAC...
TON-Ashes Where They Stood full album stream
• TON - Ashes Where They...
Mutual Hostility
/ mutualhostility
72 Legions
/ 72legions
SIT Strings
/ sitstrings
Solar Guitars
/ solarguitars
Instagram:
Dan Gates
/ dangatesgui. .
Mutual Hostility
/ mutualhosti. .
SIT Strings
/ sitstrings
Solar Guitars
/ solarguitars
#deathmetal #solarguitars #peavey #thrashmetal #blackmetal #heavymetal #guitar
Just imagine a death metal band whit the 2 guitarist doing this setup 🤘🤘🤘🤘
😳
If you use the boss bass chorus you can have the chorus only effect the high end and it doesn't add any noise
Oh cool! Thanks.
Excellent information in this video Dan. Thankyou.
Thank you!🤘
Hey Dan, if you have not tried the new Firmware for the Mimiq, I totally recommend it.
@@franciscojaldin9457 I haven’t! I should look into it!
Wow. That sounds freakin amazing!!
Very informative. Thanks!! Love your riffs btw 🤘
Thanks Kim! 🤘
Your running the Mimiq into each amps front input after the splitter out from what I can tell. That’s where I have mine, ( 6505+ & DSL ) It sounds like crap where Tc says to put it, in the effects loop of both amps, one in one amps loop and one in the other amps loop, even with a stage bug sb-6 after to fix any phase and ground loop issues.
ABY split > Mimiq stereo in > stereo out > gate each side > overdrive each side > one into the 6505+ & one into the DSL.
One dub.
Tightness at 9:00
Dry & wet 100% up
🤘🇦🇺
I don’t think I’ve ever tried it in the loop. I always put it in front of my amps!
Just my .02 cents. The Helix LT might be it if you're looking for a digital solution. It can do dual amps, has various 5150 models, and has a mimiq style doubler. Couple that with a Carvin Mach 100 power amp pedal to drive your cabs.... Sickness.
Yeah someone else mentioned that. I do have a 2 channel Carvin tube preamp with EL34.
@@DanGatesMetal : Dude, there you go, digital with tubes (/chefs kiss).
Sounds Killer 🤘🤘🤘😎😈
Likely for you there are some great multi-FX on the market right now for sub 1000€
I'm actually about to start a Death metal project myself and I've been looking at potential live rigs.
You need to see what you need either a digital rig or an Analogue rig.
I'm going with an Analogue rig personally because I would really love to put a pedal board together.
Edit: For a good 5150 preamp check the AMT P-brick it's probably the best one by far
Hey there, killer tone and video! I was thinking about using the Mimiq pedal in my rig to fatten up the sound, and was doing some research and found this video. How do you wire the pedal into your rig? Before or after the splitter???
It’s after the splitter so that the pedal can be used stereo.
awesome brother .
Thanks! 🤘
Im going to look into that mimic. Thats pretty cool.
Have you tried bbe 362 sonic maximizer? That thing helps give you hiss and pushes your sound farther
I used to use one a long time ago. I ended liking my amp sound better without it.
I haven't played live in decades but just the thought of moving those cabs and heads makes my old man back hurt. I'd definitely use a modeler if I still gigged. Sounds great though.
It is a lot of gear! With modelers getting so good I’ve definitely considered going that route!
@@DanGatesMetal If you do get a modeler it'd be interesting to see how it compares to the real amp tone and how you configured it.
Hell yeah Dan. Any plans to check out the new 6505s with their new transformers? Apparently you can biased them with EL34s.
I’d love to check one out. Don’t see myself buying one though.
Nice rig! What firmware are you using?
Thanks! Protools.
How does the Zuul compare to the G string? I have a 6505+ and I usually run two Decimator IIs. One in front of the amp and one in the loop. Was looking at getting something that could do both. Tried the boss ns-2 and it didn't work quite right.
They both work great. I probably prefer the Zuul.
I wonder if the MIMIQ would work in the effects loops. Might help with the hiss.
Yeah you can do that when using it with one amp.
If you are interested in a portable/digital rig for live use, might i suggest the ISP Theta Pro DSP?
Thanks! I’ll look into that!
@DanGatesMetal While it may not have the usual "bells & whistles" such as USB or touch screen, I personally found it to be the floor unit/preamp that I had to do the least amount of knob twiddling or tweaking to obtain a ass-kicking , hi-gain sound.
@@JPTyler I don’t need a bunch of bells and whistles! I keep it pretty simple!
@@DanGatesMetal Just a snippet of one of the ISP floorboard models: ruclips.net/video/VfMS-6QnfGw/видео.htmlsi=Jy6D_KrJVEen-cYi
I always run two amps in my studio. 90s vht pittbull 5034 and a splawn Promod. I was getting a nasty 60 cycle hum with a passive splitter. I had to buy an active Radial ab(c)y pedal.
The splitter I’m using helps with that him.
hi. man. 2 questions.
1. for solos. do u use delay for both o just for one amp?
2. have u already test with and without lehle split?
I have 2 modelers, mimiq doublers. but IDK if I have phase issues. I watched some videos and understand the difference.
thx in advanced.
I have used delay on one amp. But I mostly just ran without. Without the Lehle the amps are out of phase. So it sounds better to me to put the amps in phase with the Lehle.
TY man@@DanGatesMetal
i tried in the fx loop of both of my modelers, then settled on running my guitar into the mimiq and then sending to both modelers input. sounds a bit better and less drastic like that. still tweaking for it to be better and i didn't notice any phasing issues. i copied his settings and will know tomorrow after work if i like it more, but at the moment i am struggling a little and disappointed. it's not as consistent as i'd like, but again still finding the right setting and it does sound better than ADT on my helix floor and stereo doubler is a close runner up on my headrush prime. using a capture on the prime, mandarin rocker on the floor, same settings, signal path for both are as similar as can be otherwise with the same settings. my main gripe so far is it doesn't sound as good as this video with the settings i had been using. hoping these help a lot more for what i am after.
Thx for the tip with the Lehle. Have you tried this setup with just one cab?
I have. It’s been a while but seems to sound better with 2.
Noise no music smoke cocaine and overdose 5:40
Luc Lemay gorguts \M/