Hi Rewa thanks for this amazing video! I was wondering if you possibly have the link for the tools used for this repair, such as the grinding tool and the solder wire to short the chip. Thanks!
@@rami7229 i use a 0.02 mm. enameled/isolated one like this one shop.rewa.tech/detail/0-02mm-varnished-wire-for-mobile-phone-repair-ss-007-oem-new.html
Thank you Rewa technology sharing this amazing video 😍 and I have one question 🙋♂️ JC and i2c replaced dot matrix cable and luban replaced only chip inside dot matrix I can’t understand that dot matrix flex cable damaged or dot matrix chip🤔?
Hi, thanks for watching. The dot projector repair tool solutions aim to repair dot matrix chip, damaged flex cable could be repaired by jumping wire or replacing cable.
Dear, thaks a lot for yours videos. Do you have information about Qianli ID Face Dot Matrix Projector? If is possible I need you to help me with the support for the Dot Projector tool. The "QLCX Repair" program is having problems in its last update, and it updated my DotProjector, corrupting the program and leaving the machine inoperative. A hug
was wondering if i can get some help I have the i2c kit and i did the procedure, after i solder the chip on the new flex and tested it on the programmer all 4 lights showed up and passed but when i plug the dot projector into the phone I get "try setting up face ID later" I read and write the data so I'm not sure what's going on
Hi thanks for this amazing video! What if the Face ID works but I need to change the camera module (frontcam doesn’t) ... can I directly read from the old flex and write to the new module or Will I need to swap the dot projectors?
@@dantelangone7761 i Changed iPhone 11pro Frontkamera its very difficult du Not destroy dir Projektor after that repair my face ID functions but Not AS good aß before i Had die restart offen the cellphone to Setup face id.
Im not sure where u are located. But im in Oklahoma and we do these repairs at our shops. We also do Mil in repairs as well if required. So just get back to me if interested
Products recommended in this video:
I2C Dot Projector Repair Programmer: bit.ly/3dAHOsm
Dot Projector Flex Cable: bit.ly/3416OFW
JC Pro1000s Pcie Nand Read & Write Programmer: bit.ly/3j4ySwm
Face ID Dot Matrix Detection Module: bit.ly/3j5ug9l
For more product, please check: shop.rewa.tech/
Hi Rewa thanks for this amazing video! I was wondering if you possibly have the link for the tools used for this repair, such as the grinding tool and the solder wire to short the chip.
Thanks!
they sell everything you see in their videos.
@@FrancoCoccini do you possibly know the wire thickness used when shorting pin 2 and pin 3?
@@rami7229 i use a 0.02 mm. enameled/isolated one like this one shop.rewa.tech/detail/0-02mm-varnished-wire-for-mobile-phone-repair-ss-007-oem-new.html
@@FrancoCoccini appreciate the help! Thank you
if you have detailed reviews on i2C i6 / Luban L3 mini / JC V1SE / Qianli iCopy , please? Can you share info. thanks!
What is meant by "Requires official authorization"?
With Luban method, it is possible to restore the dot projector, also if I lost the original one?
It is right?
Hey, great video! Thanks for sharing your knowledge
No every programmer needs the cables that come with it. I2C programmer supports i2c cables and so do JC and Luban.
Nice review. Keep em coming :)
you guys are about to take alot of my money
Hi! I have lost 11pro max dot projector data information chip and eeprom is gone, there is a way to get it somehow? Thanks!
Do any flex cable work with any programmer? Or does it have to be specially i2c cable?
Thank you Rewa technology sharing this amazing video 😍 and I have one question 🙋♂️ JC and i2c replaced dot matrix cable and luban replaced only chip inside dot matrix I can’t understand that dot matrix flex cable damaged or dot matrix chip🤔?
Hi, thanks for watching. The dot projector repair tool solutions aim to repair dot matrix chip, damaged flex cable could be repaired by jumping wire or replacing cable.
I’m confused, so the flex cable is what goes bad on the dot projector? It’s not the encryption chip itself?
Super video sir
After doing the repair my NTC is in error, what can be!!??
Dear, thaks a lot for yours videos. Do you have information about Qianli ID Face Dot Matrix Projector?
If is possible I need you to help me with the support for the Dot Projector tool.
The "QLCX Repair" program is having problems in its last update, and it updated my DotProjector, corrupting the program and leaving the machine inoperative. A hug
Very good, I liked it.
Congratulations mr rewa technology 🥰👍🍎🍏
need to understand, why the mosfet need to be removed? whats the function of mosfet?
was wondering if i can get some help I have the i2c kit and i did the procedure, after i solder the chip on the new flex and tested it on the programmer all 4 lights showed up and passed but when i plug the dot projector into the phone I get "try setting up face ID later" I read and write the data so I'm not sure what's going on
Might not be dot projector issue
This method works only for xs max or for all apple phones with face id issues?
Hi thanks for this amazing video! What if the Face ID works but I need to change the camera module (frontcam doesn’t) ... can I directly read from the old flex and write to the new module or Will I need to swap the dot projectors?
Do you want to Change Frontkamera?
@@nexulp7887 yes I’d like
@@dantelangone7761 i Changed iPhone 11pro Frontkamera its very difficult du Not destroy dir Projektor after that repair my face ID functions but Not AS good aß before i Had die restart offen the cellphone to Setup face id.
What’s mean “authorization required”?
I have the JC, but I have no authorization, and works very well. Many thet you have to use the signed flex only from them!
Could you please provide a link for the small grinding tool?
It's a dremel
@@BeyondWoWJunkies But what is the tip on the video. it looks like some diamond disc cutter or something..
What's the difference between i2c V8,M12,and i6s
My old iPhone X has Move a little higher/lower, (dot projector) where can I take it to get it fixed?
Im not sure where u are located. But im in Oklahoma and we do these repairs at our shops. We also do Mil in repairs as well if required. So just get back to me if interested
@@thephonedoctors4140 I am not in the United States.
@@matthewtrainsandlifts if in Europe, this is your man
ruclips.net/channel/UCLrS7einmzTbMO8s9LGekVA
Very hard work
Oooooo it's magic of rewa
Amazing!
good 👍
Very good
Nice 👍
Can we send my mobile to fix face id issue ???
Big like for you ❤️
you always the best 💜
Rewa starts there , where rossman ends :)
And what about JC V1S?
Thanks!
temperature n air plz show
I hope that there would be a machine like that to restore the Touch ID function.
I think there is bro
@@s_car. Apple has only the power to do it...
@@caelari1722 oh ok, cool then
@@caelari1722 But Face ID is better than Touch ID
How much money need for repairing my iphone x face id?
big fan of u from bangladesh!!
hi, for individual repair enqiriy, pls refer to academy.rewa.tech/just-ask
How much
Hi, for the price of the product, pls check bit.ly/3dAHOsm
👍
Wow
Honestly I lost my phone giving me Face ID face #wietechie#
wow
👍👍👍👍👍
I want to repair my smasung mobile. Plz give me contact
選萬隆😘
too expensive as well
Take that apple
and this is why i never buy Apple products.
Apple enginer is defeated
Or just send it to apple for a repair
Noob
jc v1s?????? 🤣