Life of a Mobile Mechanic | Seat Ibiza 1.4 Petrol Cambelt Replacement | £2,500 MISTAKE! | VLOG 11
HTML-код
- Опубликовано: 16 окт 2024
- Finally some sunshine here!
We started the day with this beautiful Seat Ibiza; in for a Cambelt and Water Pump replacement. It was then followed by a DPF regen for an Audi A4.
We all know that people can sometimes make a mistake here and there, well, I’m one of them! Watch the video and find out what happened!
Please like, comment, and subscribe to see more contents like this!
Thank you for watching!
If you have any enquiries, or want to get a quote for a job, please send us an email on admin@marvelous-cars.com or visit us on www.marvelous-cars.com and fill in our enquiry form.
Follow us on:
Instagram: marvelouscarsmobilemechanic
Tiktok: marvelouscars
Cambelt Replacement | Seat Cambelt Replacement | Seat Ibiza Cambelt Replacement | VW Polo Cambelt Replacement | VW Cambelt Replacement VW Golf Cambelt Replacement | Seat Ibiza 1.4 Petrol Cambelt Replacement | Seat Ibiza Water Pump Replacement | Seat Ibiza 1.4 Petrol Cambelt and Water Pump Replacement | VW Polo Cambelt Replacement | VW Polo 1.4 Cambelt Replacement | VW Polo Cambelt and Water Pump Replacement | Skoda Fabia 1.4 Cambelt Replacement | Skoda Cambelt Replacement | Skoda Cambelt and Water Pump Replacement | Skoda Fabia 1.4 Cambelt and Water Pump Replacement | Work VLOG | Lifestyle Vlog | Pinoy Mekaniko |
![How to change timing belt kit and water pump on SEAT IBIZA 3 6L [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/BzX2pEJWubA/mqdefault.jpg)
Hat’s off to you for your honesty in telling us , we all make mistakes and as long as we learn by them it’s ok just a shame this one cost you so much money 😱😢
We can only wish for more great and honest mechanics like this guy.
Every day is a learning day. I have a bmw x5 40d. Im a home mecanic and changed the zf gearbox fluid. I didnt realise that xdrive cars like mine has a huge crossmember brace covering couple off the t40 bolts for the gearbox sump untill i was into the job. A standerd 1/4 size t40 bit wont fit. Luckly i got a bench grinder in my workshop at home and had to grind down a old t40 bit and wedge it into a ring spanner and get it out that way. I will never forget or lose that tool it literally saved the day. What i learnt was Being a mecanic/ engeneering is all about thinking out the box and making it work for you.
Finesse and Resilience are the most important traits that a mechanic can/must have. Your story is just a great example of that
After 40 years, I still make mistakes. We are only human, and you did the right thing, when it went wrong.
an old wise guy who taught me the job 15+ years back told me that mistakes are part of the job he was old and oaken with over 30 years experience but he still made minor mistakes and me too after 15+ years I still make mistakes
Very well said
After 40yrs as a back yard mechanic i really enjoy watching and learning from these young fella's
Thank you!
Impressive. Mistake included as you acted professionally. We all learn from our mistakes. Great job. You’ll do well
Honesty and being able to admit a mistake regardless of how big or small, is in itself, a sign of a very good mechanic. And is a mistake you will never make again.
We all learn lessons from mistakes and as you said you now double and triple check. Congrats to you and the work you do.
I am not a motor engineer, I'm a policeman, I have made mistakes. We learn from them. I admire you for telling the tale concerning your error.
love your honesty mistakes happen but you will learn
I tip my hat to you young man massive respect for taking which was unfortunate a costly mistake.
I made a similar mistake on a 2003 ford focus 1.6 zetec back in the day.
Put it back together, all running lovely, on the test drive the crankshaft bolt came loose when I turned the steering.
Floating pulley design meant goodbye valves.
Luckily a mate happened to have a head cheap so i rebuilt it.
1st clip - I live just down the road from there. Did the brakes on my honda civic and remembered your comments about making sure the carrier and sliders are spotless. Got my wire brush drill attachment and happy days. Pads sliding in and out beautifully. Are you filipino? My wife is from Cebu.
Appreciate your honesty with the Ford there’s so many so called mechanics that balls up every day and leg it giving us mobile mechanics a bad name,Keep up the good work
I have to be honest mate. Best policy in the world- I broke it, have to sort it. I still have the customer’s custom till this day because he knows that I can be trusted no matter how much it cost. Funnily enough, I’ve done his Cambelt like 2 months ago with their other car 😂
Had the same first time I ever did a megane belt. Same floating pulley set up. Turned over by hand and it locked up. That one check saved my bacon.
i had a ford focus, first time doing a belt change, when i loosen the pully i went off time. 😅 back then i make markings with a pencil/marker. so when i do a belt right now i always use the proper timing tools.
As you said lad triple check ,no rush and job done right,you young but a good mechanic .
Yeah mate. Learnt from that to never rush my jobs ever again. Take my time, do it right the first time.
Im probably older than most of my viewers, I just look young with 2 kids 😂🫣
Fair play for admitting to the mistake.
We all make mistakes, the important thing is to learn from them.
Love your videos mate keep it up and big up from Scotland 👍
Easily done, especially with floating pulleys, no Woodruff keys. It's a pain in the butt having to remove the starter to lock the crank but to be safe you must 🥴👍
Yep, always triple check, good job on that one, i did my own cambelt on a car i bought cheap and it was the original 17 year old cambelt haha and wasn't actually in that bad condition. I think if my cambelt said 2019 i would leave it for another 3-5 years before changing it.
Jesus! You’re either lucky or unlucky that the belt was not replaced 😂. Tbh the guy had only bought it a year ago and didn’t have service history for the car so he gave us a call for the ‘just in case’
Nice video....thankx for sharing...i am doing the same job for morethan 20 yrs now.
All the best
Great effort, we all make mistakes , that's how we learn 😉👌
Subbed. Keep doing what you're doing! Love your contents. I wish you all the best!
Top job pal.....the focus mistake has done u well in the long run u,ll never 4get to check timing....🏴👍
Definitely mate. Makes me very paranoid. Adds additional hour, more or less, to check everything on each timing job 😂
Sorry to here that about the focus how annoying but we all learn from our mistakes, ibiza cambelt looks nice and easy unlike most cars 👍👍👍
Terrible mistake mate tbh. I felt bad for the customer more than anything 😂
Great interesting vlog as always and honesty, but wondering how much would you charge on a cambelt renewal on the 1 litre 68 plate automatic ecosport wet belt and also a transit connect 67 plate 1.5 diesel many thanks kind regards Mark 😃👍
Great vid and all the best with your business.🙂👍
Good luck with this channel mate 👍🏻👍🏻
... experience is the sum of all failures - keep strong - what doesn't kill you makes you tougher!
First and only one I done was last year on my s60 d5 p2. Must’ve sat for a good 5-10 mins with my hand on the key just praying it was all in time for first crank😂👌🏻
Got caught out on a Renault Megan 1.4 I didn't realize the crank pulley has no keyway it added hours to the job trying to find TDC
Lesson learned no damages done thank God I copped my mistake
So as a person who's just getting into car maintenance (did my first oil change only a week ago!)
What did he do wrong with his mistake? Did he put the engine out of time/make the cylinder hit the valves?
I feel like everyone knew that Boise when he made it and here's me being like "doesn't it usually tick?"
Hello we all do mistakes. Bul admit a mistake not all People can do.
I will repare a seat like this in the next week with the same problem , what damage your engine have after that?
Thank you and good work 👍💪
Great video & appreciate your honesty when things go wrong!
Only way to build trust with my customers mate; unfortunately this one was an expensive way to earn their trust 🥲😂
At least you admitted a mistake ,,the beauty of working on trucks no belts just gears ,,,though i have spent the last 2 years changing the camshaft which sits deep in the engine but easy though long job
i have done many fords that have the floating crank toothed belt pulley. not once have i used the pin for this as seen others snap or bend that pin then end up having to drop the sump to sort it.
most learn by there mistakes one young lad i had under me at a garage teaching him after he did one and snapped the pin.
he lost his lunch break over this had to remove the sump to get it fixed.
i showed him after that same mistake but he did this cranking it over by hand i then showed it can be done without the tool. he had then a few more no lower tool just common sense a marker pen and a scribe tool and the cam shaft locking tool.
it can be done without the correct tools like you state a drill bit bolt etc.
when i was at peugeot in 89 had a belt job to do my first day there asked where is the locking tools and the workshop forman gave me a few 8mm bolts one on a bit of welding rod to lock the crank in place.
i always crank it over by hand after doing cam belts and mark things before removal if nothing lines up after cranking it by hand then there is a problem. floating crank pulleys are a pain in the but if it a engine where you can see the flywheel or ring gear with just removing a plate ot starter is a easy removal the do it and mark it up. best way to see the crank is where it should be.
that crank pin the young lad broke was when he put the crank bolt in and tighten it up with a air gun also seen it with a battery gun.
best of luck with you job on the road i did it for a few years the rainy days where S*** and horrible.
Floating crank is the pits of all Cambelt jobs tbh. I hated myself after that mistake. Took a week off to get myself together after making such a big mistake 🫣. I’ve got ways now to prevent that from happening on floating cranks., like what you said, marking the flywheel and scribe tool. We all learn from mistakes, some cheap, some expensive 😂
@@themarvelousvlog exactly i hate turning the key after every belt job i did when i first started i still do with some.
we all start from somewhere and we all make mistakes.
you are still young and learning.
never trust them locking pins that go through the block long screwdriver down the plug to find tdc or a good dial gauge with a long shaft. then mark that crank not as easy with a diesel but as you know mark it before removing the old belt.
So If I am correct you didn't time the engine and you didn't put the Flywheel locking tool on when you were supposed to.
Why would the cam belt and water pump need changing? If you said it was changed in 2021,2022, or was it just the belt that was changed before?
Tbh with I do think that only the upper belt was replaced before; no water pump or the main running belt was replaced. But who knows, I can only speculate
I just did my first ever timing belt on my renault trafic, must admit I was quite apprehensive about turning the key. All went well though.
I also did my own Trafic chain. Not a lot of space down the side. Only took me 4 days 😅
Usually an engine out job. I know a mobile mech that can do it in 3-4hrs without taking the engine out and it’s a proper job
Issue with the focus it only needed top end rebuild ....if that as low rev clash ...but what you meant to do .. hopefully you kept old engine rebuilt it and sold it on
i bet it didnt even need a rebuild, timing was too far off most likley hence compression, top slow cranking to damage valve, retime it correctly i bet it would have run, wont be the first time on a ford engine, done it my self once
@therefused1 it definitely needed a rebuild. snapped valve, valve in the bore, slapped the cylinder wall, ruined the piston. So yeah, need a rebuild/new engine.
If we did actually bet real money you would’ve lost 😂
@@themarvelousvlog how unfortunate dude, these things happen, i was welding a alfa gt once, just a patch on the sill, didnt realise no seperation between sill and inside of car, some insualtion went up, before i noticed the door card and everythng, wrote it off. had to pay customer for the entire car, but luckily i managed to break it for parts so it didnt hurt me too much
That sounds more painful than this to be honest. At least this went down as a business expense and used it to offset my tax but it’s still £2500 😭
First one I did I was lucky I didn't know they were floating pulleys until I removed the crank pulley. Managed to do it without the locking tool but wasn't nice 😮
How can it need doing again after just a few years (on a low milage / runaround hatchback)?
Agree with most of the comments, honesty is very reassuring. Keep it up.
How can we contact u…?
What would a cambelt change cost for a Seat Ibiza? Thanks for the post
For this specific car, from what I can remember, the owner paid £380 something 🤔
Always use a new crank pulley bolt on the 1.6 / 1.4 ford engines no key ways rely on tightness of the bolt heard of them working loose my own 1.8 zetec did they are keyed to the crank only the cams are free floating on these My crank pulley got chewed up and woodruff key so from now on new crank pulley bolt each time not worth the hassle
Good honest lad👍
Did you change the auxiliary belt
What torque did you use for the crankshaft
im confused i didnt see you lock the flywheel up like you explaine3d you didnt do before which f....cked the focus engine up. Do you always have to lock the flkywheel with a tool aswell az the pins in the front ??
Things like this happen, I mean, I have left timing lock tools in and then tried to crank over the engine. Then, I spent a whole day trying to remove the bent locking pin!
Don’t! I’ve done the same 😂
How far do you travel? Would you do work? In Nuneaton
How much is a cam belt change on a seat Ibiza 1.4?
Great video
We have all been there mate
That feeling 😳
Thing is if iv not done one before or dont have the tools i dont do it.
So how did you do your first ever Cambelt if you don’t do the ones you ain’t done before? 👀
I’d say give it a go. Same stuff anyway, some are just longer to do
My Citroen picasso 2003 1.6 tu petrol has only 43000 miles on it says the cambelt was changed in 2019 which was 5000 miles ago, i was going to leave it over the winter and check it next summer , should be ok?
Any info on tensioning this belt? The Haynes manual says
Its measured in SEEMS units which Peugeot Citroen just made up I've heard
Where do the arrow on the crank tensioner line up to
What areas u cover mate?
Is the risk v reward doing cam belts mobile worth it ?
Mobile or Garage, same procedure anyway. Cambelts defo 100000% worth it- no exaggeration intended there 👀
My point was is there more profit in a couple of sets of discs and pads with less potential drama
I like it when people like you (and myself) say when they admit to a mistake, you get the ones who always cover up their mistakes as best as they can and never admit they are wrong calling honest people wankers, when really it's them who are just that. Why did it go wrong though and lock up? What did you actually do wrong? Leave a locking tool in there?
To be honest with you, I’m not sure what went wrong. All the timing tools lined up, everything torqued to spec, no timing tools left in there and it just went pop pop 😭. Checked it over and over before cranking as well!
@@themarvelousvlog yeah, very odd. Not good for my confidence when I've got a timing belt to do on a friends 1.6 petrol Vauxhall mokka in a week or two and that's including changing the actuator pulleys. My friend who got me autodata, it says on there that for the Mokka you have to remove starter motor to lock the flywheel with a locking tool, but after looking high and low I can't find the specific one for this Mokka and even someone who used to work at Vauxhall told me just lock the camshafts with both tools used and it should be fine. After you have said that on your video it doesn't inspire much faith in my job to come.
Hello po. I live in the UK and I just passed my driving test. Any suggestion po for first car na automatic and hybrid type? Second hand car.
Corsa or a fiesta mate good runners and cheap on insurance and fuel
High risk job,I charge 500 euro on average for labour on a timing belt,if you are going to give warranty then you have to charge well.
What area do you cover?
How come you kept the car on double yellow lines and dropped antifreeze on the road 😅
Or torque anything up.If I don’t know the torque settings,I then use locktite ,I,ve done loads of cambelts. and got lazy not turning them over twice.Lucky never had a failure now I check everything twice.After seeing these failures,I don’t fancy forking out to replace engines.leave that others.
I’m surprised you didn’t lock the crank
I think most mechanics (with the keyed cranks) zip up the pulley then start the engine and zip it a bit more afterwards just to make sure it's tight --well, what I do. However, with a stupid keyless system there is not really a way around not following the proper procedure which is going to add time to the job. Even then, the keyless systems still fail on the road...that's another story.
had a clutch change on a citoen 1,4hdi came back with a engine lite on dash took it back to clear fault cleared faults and within half hour its back on the 1st time he didnt even pop the bonett just sat in seat with the scan tool fault was temperure to low on intake this will be the 3rd time taking it back any advice wekcome m8
Hmmm… if I’m correct, intake is on the gearbox side, right? If so, he needs to check all the wires that he’s touched, or might have snagged when he was dropping the gearbox
I can only really guess as I’m not there 😅
What do you mobile mechs do when it's pissing down and the customer doesn't have a garage or car port?
We dance with rain with a little of complain like the words f*k, s**t, c**t, tw*t and all of that 😂.
All jokes aside, we always carry a gazebo for the just in case. Floor mats can stop the flowing water from getting us completely soaked
Where are you based I need some work doing
How much would a cam belt replacement be on a 2011 Nissan micra petrol ⛽️
Will need the reg etc…
@@themarvelousvlog AK61BXA
@@themarvelousvlog it's got 151,340 miles on it
One of my cars is 22 year old Honda its worth nothing it drives great its done a star ship mileage and its on the same belt I know this because I bought the car new I will use is until it dies, I can change the cambelt is easy to do myself but want to see how long the car lasts. Honda told me over 200k miles ago it needed replaced I just thought no it doesn't. Don't know why some manufacturer engines today still use cambelts when chains are better. Saving money is my guess. I have inspected the belt it has no cracks and looks like new
So you paid £2500 for new engine and you still made £200 profit from just changing the cam belt ?
i have over 25 years fitting cam belts u are still a rockie learn the hard way and the right way and u dont now any of them g luck
Thank you! I know as a mechanic, we learn something new everyday🫡
Didn't learn to read or write in those 25 years though did you @figol6272
Bro” did you record the car that you made a mistake on ? Thanks 👍🏼👍🏼👍🏼👍🏼👍🏼
Nah this was waaaay back. Way before I started vlogging my jobs 😅
I’ve made that sort of same mistake, 1.6 zetec focus I think it was 2008/09, going back years.
Come in due to the cam belt failed, silly me didn’t do the crank bolt tight enough, bad habit just gun up as tight as they go and never had an issue.
Started it up after the rebuild all good, revved it up and a horrible rattle and cut out, so yeah was fun taking the head off for the second time for a rebuild but this time out of my packet 🤦♂️
Learn from the mistakes and move on haha!
It’s the torquing and angle tightening of the crank pulley bolt that’s the difficult part.
Buy the tool it’ll speed up the replacement time.
Top tip: Always replace the stud on VW group engines securing the tensioner.
Doing that on the floor is definitely difficult. Toque multiplier definitely helps if needed.
I totally agree mate. They always come as a set when you purchase the belt kit anyway. Only a fool would not replace that 😂
New updated vw kits for later 1.6 diesel engines don't have the tensioner stud for some reason !
because its known to snap and it isnt even worth risking - as per the dealer service manual :)
Ina have lot issues with water pump . nobody it's perfect:)
If it was done in 19' or 20' why are you even changing it again?
Not my request, it’s the customer’s. I respect that they’re taking care of their vehicle
@@themarvelousvlog by removing a 2 year old vw belt for an INA one 😂
Did you know the history of it? The customer didn’t hence why he wanted it replaced 🤷🏽♂️
*EDIT
INA is the OEM for VW 😉
It’s a wonder he didn’t want a clutch thrown in while you put a new engine in, Just for good will.
He was fair, an I think I have too. New clutch would be taking it too far 🤢😂
Ironically your next mistake will be a fine of £2500-
"It is an offence to run a business which carries out repairs to motor vehicles on the highway. Offenders can be prosecuted and face a fine of up to £2,500. You can repair your own vehicle as the law says the offence is if you carry out repairs for gain or profit."
The ford got a free cranck
👍👍👍👍Like it !!!
Thank you!
Free floating pulley on the crank. Caught many of a mechanic out. Don’t let a customer decide what gets fixed though.
I have done a fair amount before this incident happened, I was just not being cautious. Had to learn to be extra when doing jobs such as this.
Regarding the next comment, end of the day, it’s not my property, and at the time, the car was fairly new and was low on mileage so I though f*ck it, I’m insured anyway 😂
Interesting video. Subscribed 👍
Thank you!
New engine? New pistons, and valves.
Why not just do what every other mechanic does and do the old "I know your only in for an oil change but your engine needs replacing".... Worst tradespeople to deal with.
Not me mate. Only advise what needs doing and warn them about future potential failure I.e coil spring corrosion, leaks etc…
No need to make bucks and end up not retaining the same customer
Gfs car parts what happened to Euros It’s a good. Good job. Euro Car Parts own gfs
He shouldn't have asked for a new engine.
Sorry. I had to stop the video after 30 seconds. You are supposed to be a mechanic in your native country. Don't say that is England. The English are white. Nothing racist about it. The African continent needs mechanics. See? I don't doubt your abilities. Only the place where you practice them.👍👍.
Right… 👀
I think he's from England, why don't you go watch some African mechanics instead
@tonyrice3348 I couldn’t believe his comment 😂
@@themarvelousvlog me either and played the racist card too, shocking. I just discovered your channel yesterday, subscribed too, I watch loads of car mechanics, lm auto repairs, south main auto, pine hollow & bodgit and legit are my go to, all these guys are at the top of their game and it never ceases to amaze me how many keyboard warriors there are usually telling these guys they did something wrong. One that comes to mind was rear brake pads (manual handbrake), some guy in the comments was saying, some mechanic you are, you didn't disconnect the battery for safety 🙈 Keep doing what you are doing man, there's always gonna be that small percentage of trolls. Looking forward to seeing more of your videos 🧑🔧
There’s always something that they don’t see behind the scenes that I do to take precautions. If I didn’t disconnect the battery, why didn’t the positive cable, that was touching the engine glow, or at least produced a spark? 🤷🏽♂️. Sometimes I don’t even need to explain to people but sometimes people are so stupid that you have to spell it out to them 🫣😂
Hi keep it up you are doing your best to keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery
Ford engines have have no KEY on crankshaft to align pulley - they rely on friction washers. Totally retarded design. Have to remove valve cover to fo fit aligning tools etc... pain in the butt.
They give me the most ick when i turn the key for the first time 😂
Totally agree. Don't ask me why. it was/is painful.
Floating Crankshaft
What area do you cover?