BODY WORK: HOW TO APPLY AUTO BODY FILLER FOR SHOW CAR FINISH
HTML-код
- Опубликовано: 5 сен 2024
- Today we're going to show the process of applying auto body filler by 'flooding' the entire truck. This means we're going to put on more than it needs. Once it's flooded, we can sand it down to the highest point of the metal creating one level surface 🔥
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #bodywork #autobodyfiller #bodyfiller #autobody #classiccars #hotrods #bondo #howtoapplybodyfiller
I'm Working On My Wife's Capri (Front Brakes, Ball Joints, Driveline CV Axle Hub Bearing Replacement, My Point Is: Never Did This On A Front Wheel Drive Car And I Was Nervous! ... After Watching You Chad & Jolene I'm No Longer Nervous! ... "Don't Be Scared!" Let's Go Do It!! THANK YOU! You Both Are A VERY POSITIVE INFLUENCE!!
Having been in this industry for over 45 years and now retired, I must say this vehicle he is working on is the most bizarre I have ever played eyes on. Great video and cannot unsee this monstrosity.
@@galenyoung8349 He's not that old.
You are a retired body man?! I have never met one before. We usually work till we die lol
@@jjf1986AZ he also dissed on another man's work he's probably posing
I still don't see how you're gonna climb up into it
so right
Love the saying "don't be scared " you have changed my attitude to how I work on cars, thank you Chad and Jolene.
@9:51
I have been in all aspects of the auto industry for over 43 years. A lot of our work comes from people who weren’t afraid of tearing into a job and soon finding out that they were way in over their heads, especially on new cars and trucks. Most of the time it cost more money than it would have if they had taken it to a professional to start with.
I did this body fill flooding back in the early 80's It does work just fine and like you say it saves time and it looks good at the end. I had a old grand le mans wagon that I did all over. I even rebuilt the engine and trans . Chad you are a master at doing this .
I absolutely sure that you get the respect you deserve Chad from myself and I think I can speak for all your fans. I've seen that you pay attention to everyone watching you and have even used some of their suggestions. So thank you and the beautiful Jolene for the great entertainment.
I love the message Chad sends ... even if you are lime me and u love missing and shaping .... you can relate to his insistence .... that time saved , not sanding and fussing with each step ..... I’d personally compromise .... and block litely each application .... to ensure good shape ..... but in the end , it’s all about the last coat or “
Millimetre” or prep before paint !!
the ocean floor analogy works awesome. What you have shown in these videos took me years to learn . I always tried putting almost no filler and adding and adding over and over to save some materials and costing me time .
The game this dude be givin away is priceless. True motivation. I'm ready to start puttin in work on my dad's old 54 crestline. Much respect for you my guy 💪🏽
We’re sitting here watching Bad Chad with my 82 year old mom and she’s very impressed with the passion that Chad puts into his work!
I enjoy the whole process from fab, to fill, to paint. My 37 Chevy truck needs lots of work and you give me the info and the confidence to tackle it. Thanks for sharing your passion with us all. Why does your body fill give you so much time to work with it. Without the resin, I always run out of time even on smaller batches. (brand maybe)
Don’t be scared, there’s nothing we can’t fix.
Thank you Chad for reminding me of that.
@9:51
A good philosophy is to appley the spaktula first to the ground in one way. But then strech it backwards and in all other other dimensions too. In this way the spaktular meets the ground much better and do not miss junktion to the other sides of the cavetie. Think of any cavity (deep like a howle or only flat) and your spaktular goses over it. The spektular gets no good kontact and no good fill beside the work-direktion. After grinding you get howles and have to fill them more ticky up. If you will do so like spoken, your time to apply the spektular will be much less. And that is the reason, because they all try to apply much spektular in a short time in mainly only one direction.
We loved watching the Executive Producer, Owner, Welder, Camera person, Merch person, welding like a champ!!!
I love his content but I have to say it's refreshing seeing someone be so good to their old lady essentially "in front of the guys" I'd have to imagine old Chad is just a really good fellar.
Great video again,love the way you're explaining every single thing you're doing on a build,it's the master teaching everybody and showing his years of experience building on the fly,also great filming of Jolene,thanks for sharing
I was a prototype maker for a long time and I'm enjoying watching another prototype maker making a reality from a dream.
Thanks to both of you for sharing your talents with us!
Fina has the best spot in the shop. She always looks so unimpressed. She’s styling today with her Lincoln Electric bandanna.👍🇨🇦
With a last name of O’Brien he can’t be wrong lol 😂
I will have to say, in the beginning of this build I was lost.
The finished product shows your attention to detail and true craftmanship.!!!!
Much respect for so many things presented in your videos, Chad.
To have skills is awesome. But, to take the time to teach those skills to others, is commendable.
Further, Chad, you never seem to post a video that fails to remind me of how I should treat my wife.
Thank you, for all of the above! 😎👍
Wish i had seen this 40 years ago, i was taught that you had to rough up the previous coating before applying next coat, such a timesaver, wish i was still doing autobody work but am retired and health issues won't allow me to. I appreciate all your videos Chad & Jolene. Do have one request Chad, we want to see more of Jolene!!! HAHAHA! Thanks
I do a lot of decorating repairs, just something I’ve learnt to do over the last 10 years and I could see me finding this quite easy. Cheers for the video
Oh im scared alright!..lol 50 min it took just to spread out one coat of mud over just part of one qtr panel, which is kinda a easy flat open spot..And then to think that needs to be sanded and repeat another coat of mud and then if it was me i would switch to a coat of glazing putty..all those steps need sanded between..Gives you an idea of how many hrs its going to take to just do the mud work!...Oh and mudding all the concave body line sections that you have to spread the mud out with your fingers and then get creative with different sanding blocks...jeez so much work!! and so much money in sand paper and mud..And to think we havent even got to fill primer yet which has about just as many steps!!..im glad you still got the motivation in you Chad
Love seeing all the steps in your creative process.
I know you have fans on here and I’m not doubting that but, I don’t believe that they can ever comprehend the skill level that you have. The creativity and craftsmanship is truly unbelievable. I’m obsessed with this build, absolutely love it.
Taking time makes perfect.This is going to look awesome when finished.Learning lots .
You and joline are doing a great job. By watching you on this build I have learned a few things. And watching the video as a whole it is done well.
The cab over is looking fantastic can't wait till it starts getting to the final stages
Chad is a man that chooses his battles. This serves him well and is key to achieving his creative vision.
Grinding and sanding fibreglass is a huge challenge and a battle bet avoided.. It eats time and consumables and, destroys your tools too.
I love learning how to do things I have always wanted to do. Thank you Chad and Jolene for filming your build
I've done body work on all my vehicles over the years, and the one thing I wish I had was a helper mixing the mud so I could keep applying it. I always had to Stop and remix, like your doing.
But thanks for the VIDEO, BTW...
COOL LOOKING TRUCK, CAN'T WAIT FOR THE FINISHED RESULTS...
When it comes to the body work, you do a great job. Building this truck on the fly is not an easy task. You do what has worked for you and has been tried and tested. Jolene does a fabulous job with the camera work.
Yeah I believed west Coast Custums to do amazing work as well until I seen their products in person.
Its awesome to see all of the real world work that goes into making a nice car or truck! Not very many folks show that! It takes alot of hard work to make something like that!
I'd love to see the cab over build go to the next level one day, love to see it painted and driving 🚗 chad and Jolene. Absolutely love watching the different cars 🚗 you have been working on 😅
Chad, since this is considered a truck; will you "beef" up the suspension at all?
Dude you are a force to be reckoned with. You really build some of the coolest car's and trucks I've ever seen . keep doing what you're doing .much respect bro.
Good morning to you all in Canada all the way from AUSTRALIA looking mighty fine on the truck likin' the progress too doin' a mighty fine job there too
It’s like a big bday cake 🎂 ! I learn something new everyday. Thank you Chad and Jolene👍🍻
body work is so deverse and done in so many ways. You're doing what i think i'd do it like. I'd probably put resin in my body filler too because it goes on smoother with less pin holes. I think the biggest mistake made is when you put filler here and there several times instead of flooding the whole thing. I like using a cheese grater before reappling filler if you catch it right it helps level it out making it all go faster. It saves on sandpaper because you don't dull it getting the top off of it. Keep up the good work !
I love watching people being creative and loving what they are doing! Nice work!
BadChad's channel is so unique it's a part Tony Robbins motivational seminar and part Monster Garage . Both inlightening and entertaining .
Damn Chad, that's a lot of work in that mud,you need a helper to mix while you apply. Great video as always
BAD CHAD JUST LOVE THE WAY YOUU MAKE THESE OLD CARS FROM NEXT TO NOTHING; YOU DO THE BEST WORK THAT I HAVE EVER SEEN.AND YOU DO MOTOVATE ME TO TRY TO BUILD SOMETHING FROM SCRATCH.
Let the magic that happens beneath stellar paint be revealed via Bad Chad-a true craftsman and artist. Thanks Chad for sharing your knowledge and showcasing the talents one must have to do what you and others like you do. ✌🏻❤️
Even after many years of doing this, i learn everytime i watch one of your videos, and thank you. Take care Chad and Jolene.
Looking forward to the work between the cabover and the 36 to keep the content changing and everyone excited to see the build progressing. Nice Job Chad and Jolene. Enjoy your weekend
that's a really good idea with the content switching it up like that between a motor doing chops working on paint and then body between different cars you're right people won't get bored
Love watching you guys work! Your work inspires me to push harder and build better! I'm a young(ish) collision repair tech on his way into restorations and custom work( want to learn metal finishing and how to build my own panels. )
I have a question however, what sort of adhesion do you get when putting bonds over unsanded fibre reinforced filler? usually when I do mud work I sand with 80 grit or coarser for mechanical adhesion on bare metal and 40-80 grit over fibre reinforced filler. I am not judging at all, just want to learn and expand my knowledge.
Thank you so much for you time and I look forward to your response!
Unfortunately you won't get a response. I can see he doesn't have the time to answer everyone's questions or chat with people on here, but he should at least answer 2 questions per video. I've noticed the ones that do that keep their subscribers and gain even more!
Love it, flood the body makes total sense, I’m looking for an old car myself to work on, so hopefully I can try it, have a great night, God bless.
It's amazing how nice the Cabover looks with the file on it. It completely changes the look plus it shows off the hard work Chad & Jolene have put into the project WOW! Thanks Mark Dutka
You know I must say you took that car to a whole another level I'm straight old school I'm 59 years old I like everything straight original but this that you got going on right here very very interesting can't wait to see the finished product you definitely are a master and customizing very nicely brilliantly done a lot of thinking went into that can't wait to see the finished product God bless
Chad is so quick applying that mud, seems like a bigger mixing board just might do the trick. He does go through it quickly. 👍
Glad I found this video, I miss the shows as direct TV only tevoed 24 minutes of each show. You build amazing vehicles from ground up. I've learned a lot from your work experience. Thanks keep up the great work 👍
You make it look easy , like a sculptor creating a masterpiece!
Most people don't understand an artist at work.I am an artist,and to me you are poetry in motion! Keep up the great work and creativity that you do sir!!!
IT'S FRIDAY!!! Love watching and learning. Thanks for the hard work you two
I just want to say thank you. Your videos have taught me a great deal!!! Again Thank you for sharing your knowledge with me
Hello Chad and Jolene,
I must say I really enjoyed your tv show, but am THRILLED to be watching your real world YT work MUCH more! These builds are very educational (in a down and dirty, but still highly professional way) and this truck is especially mesmerizing. The flood is a great analogy. Aside from not grinding the welds to save time, am I safe in assuming those welds are stronger?!
Keep up the good work! Shawn
sweet, I've always wanted to try doing body work, been doing plaster & drywall repairs for over 40 years and the procedure seems soo similar. Also, if you coat the whole vehicle with body fill, then the paint is being applied to the same surface, which means it gets absorbed the same throughout the car. Believe it or not, you can see the difference in how the paint soaks in to various substrates.
I'm liking the '35 chop, personally, I have always wanted a '35 slant back or coupe. Energy level seemed low yesterday, your not getting older are you? LOL! Of course I know you just turned 50, congratulations!!
He's an evil genius, fabulous vision coupled with his "can do" attitude and the support of a great woman, I would have loved to have been there when he glanced at the Merc and then at the '34 and went "hmmm,,,,,, I wonder what it would look like if I,,,,, etc etc", Chad, you're a star, keep the fire burning, Ade Davies, old skool hot rod fan, Staffordshire, England
Loving this build and of course the channel. Thank you Chad and Joleen.
959th! YIPPIE! BOY HOWDY! Miss you on TV! Are you going to be back? I hope so! Love your outrageous builds! You have a very unique mind! No one else has the vision of what you want like you! Roger in Pierre South Dakota USA
This guy makes me think of a Nova Scotian Bob Ross.
And we'll sculpt a happy little tree over here... 😅
Jammer dat ik hem nooit afgewerkt zag .
Fantastic to see joylene doing welding. Life skills are the best. You can never stop learning.
Chad your amazing at what you do and thank you so much to jolene for making this all possible for us to watch and learn from also congratulations to all the winners
Ice the cake! Thanks for sharing. Your filler is the, Icing on the Cake. It makes it look fabulous...The unifying butter that smooths the surface of the body out. I can't wait to see how you design the rear end of the car so it fits in with the back end of the truck. The anticipation is mounting...How, What and Where? Chad and Jolene, This truck is a masterpiece in the making. I can't wait to see it on the road. I'd pay you for a ride in it. You are making Truck Design history. Cool beans!
I like how chad not traditional car body work chad training on the job that good old-fashioned way I just think Jolene is getting all the knowledge from Chad do the camera work
Awesome class !!!! Would love to see the finished build have been searching but unable to find it you are a genius Chad and Jolene the queen is an awesome support for you !!!! Never stop being who yall are that's what makes you 💯
that is looking good brother nice work
should have at least sanded the fiberglass first the mud needs a mechanical bond to stick to it
You’re correct, but as the title says “show car”. Durability and longevity is not a concern.😂
I like the visual of the ocean floor. It has really helped me with the mud and guide coat application and use.
I wish I could use more mud in each application, but I'm working in 27 deg centigrade temps, so the mud becomes unworkable in a couple of minutes.
another CHAD cheese ball . another built on a rust shitty frame and used motor.
Chad, What about the step in the sides to get in the cab?
Chad I have no idea where you get your vision ,however I wish I had just a little piece of yours.
You certainly give a lot of Inspiration to me and I am sure a lot of others...Thank you so much
I'm just about ready to do the same thing with my full four door CJ-7 widened it out to 75" on 6" C channel frame. Still has removable doors and the windshield folds down with the fiberglass removable top. The hardest part will be the soft top and folding frame. But that's what makes these projects fun! Looking good!👍
Looking good with the frosting keep up the great work Chad and Jolene. Also my 7 yearold Grandson loves watching Jolenes videos and then last night I found my wife has been watching your videos to and that is something cause she will not come out in the garage and watch me working on my car because she says I talk to much go figure.
I will say it again and again great team of Chad and Jolene, and what a master craftsman
Making it look easy whilst doing a masterful job is the mark of a true craftsman. You and Jolene are a great team.
Kudos from Neavei in New Zealand
wish i was there to help you out doing the fill and sand work it sure is satisfying after doing all the repair work and to finally get to the filler work applying it like a sculptor sanding and feeling and seeing it come to life and then seeing all the hard tedious labor of finally getting it done then painted . only to wanting to get started on another project to stay in the groove.
I spackle and do body work. And if your putting a second coat always sand the first😂 you will use more material because of the high spots.
Was in canning two years ago and my aunt drove us by your shop. My brother, sister and I were staying at my uncle Sherwins (Hiltz) place
Very cool work you’re doing!
I think Chad should have the task of adding an indicator to the video that displays liters per hour.... not of gas, but body filler. That man can fling mud like no one else. Its always nice to see someone work that knows what they are doing!!
13:30!!!! Chad says it all !!! ...... if u get it and have done it ..... it’s that extra !!! Level!!! Of thinking and conveying the experience , to us !!! Dang
Happy Labor Day from United States!!! Going to the Lake and enjoy the beautiful Adirondacks!!!
....been following Chad for a long time. The work he does is top notch......you may not dig the lines of this work, but you've got to admire the skill. (Love the cow-dog)
The chop on the race car is spot on, perfect proportions. The cabinet is looking great also!
Great instruction Chad!!! Alot of people will learn from YOU!!!
We’re you going to take the top door hinges off for appearances?
We are watching Custom Car history. This is the first creation of it's kind. Many will try to follow this style after it is done.
Going to need some type of steps to get into that bad boy
Chad is one of the most talented fabricators in the business. Impressive!
I’m about to start (tomorrow) bodywork on a chopped top that has cracked over the years. I had some concerns but not after watching Chad’s DGAF attitude. There are so many people out there that are so concerned with doing it the “right way” and not about just getting it done and especially when they’re being filmed.
I had my 16 year old son watching your video learning how to apply mud. He’s gotten his first truck and he’s wanting to repaint and fill all the small dents. Thanks for your great attention to detail while showing how and why you do it the way you do. What didn’t kinds of vehicles are in your creation your working on there?
i coated a patch today on my D100 today and i tried the resin in the glass filler i used i really like how it layed out for me....thank you for the tip
Chad is a great teacher who never finished school. Who would of thought? Life taught this man a lot.
Love the videos man, you speak nothing but the truth lots of haters out there talk down on people for not doing things “by the book”. I’m not experienced at all I just took in a job from a friend just so I can practice at work, my coworkers told me I have no idea what I’m doing and that I’m never gonna learn how to do it by doing it by myself, I did a whole color change on my bimmer 2 years strong and it looks the same as it did when It came out, like you said stop being scared and do better every job
nice work chad the truck is looking awesome ....great camara work Jolene...
Ive been following your channel for about a month now you do good work chad
Great job on flooding out the body of the truck. You need to tell everyone that it takes a lot of patience to even attempt to do what you do......period!!!
The best design of a car detailing being 💕 shape bond.
@20:22 Thank you for that zoom in 👌 I've been trying to learn body work on my own for about 3 months now and I honestly appreciate the close up