Used to race in the late 70$ early 80s. After raising the kids I find myself getting seriously back into the whole BMX lifestyle; your vids and advice have been huge help. Thanks a ton you guys.
Phu is right the colder temp sauce prevents the sauce from really coating your tongue the more warmer the sauce the easier it's going to sleep in your tongue
Damn that second tip though that's what i needed to hear because my spokes are noisy. But when I feel them they are really tight i am wondering if this fix will still work for me?
Do not even try it..That frame has stress just like a helmet when you crash,even if you bend it back or can't see it,it already lost its integrity the metal is weakened
I feel like the cap Sason inside of the hot sauce at room temperature could potentially make the hot sauce seem hotter I’m not a professional but I’ve been growing extremely hot peppers out here in Las Vegas and people get back to me saying the hot sauce is not that hot after they’ve kept it in the fridge raider for more than 24 hours thank you for making these videos
I have a bike problem but my bike shop near me have broken my parts before and IDK what to do crank bolts are tight as and rounded at how do I get them out
What do I do if my bike slows down real quick when I stop peddling? Sometimes it rides ok but most of the time it feels hard and doesn’t wna coast as much what can I do? It’s a fit bike 20”??
Can someone out there explain to me how to get a front wheel centered when reinstalling? No matter what I try for both my 20” and 24” bikes, it’s the same result after many, many attempts. There seems to be no rhyme or reason to it, and it’s immensely frustrating. I don’t see any vids on this anywhere.
@@rudylopez5541 it's most likely the internals they use some fc hubs come super loose stock out the box go to the shadow website for hub info and how to adjust slack or sometimes if the hub uses poly bushings they're probably blown out or wore out and making it loose that's why it makes that loose sound also sometimes if you're frame is warped on the drop outs when you drop your bike it'll make a creaking sound because the bolts shift on the dropouts But yeah fc hubs usually have alot of play in them because of the internals or slack adjustment most likely it's the clutch rattling inside of the hub ask others that have your hub ask them if they're hub has a ton of play or slack but typically all fc hubs have this problem aswell the planetary hub or bsd hub use similar internals just different dimensions or features these hubs are new and use different internals conpared to primo stranger bsd federal etc hubs that use like a khe fc internal style yeah these hubs do have differences but typically use similar internals because it worked and wasn't hard to understand the internals and back then fc hubs were still being developed and was kinda hard to really advance the engineering on fc hubs... always check specs and features before buying parts
@@juliangaribay4711 everything’s tighten and then I get my bike and shake the wheel it’s nothing from the inside I think you probably just have to really crank down on the lock nuts because I watched a RUclipsr talk about it
I leave my wheels to my bro at local bmx shop , but I break my bikes down and clean and re grease them all up …. Ah I do do my bearings and axles with my wheels just not spokes or build . I have a fleet of 6 , 5 mid school Hoffman’s, and a haro flair
if its like one of those cheaper 410 or 510 chains they're bound to making bad sounds n stuff without lube, the only solution I would know is buying a new chain, otherwise u may have to keep lubing it. Old 410 chains dry up extremely easily and stretch.
I got a question... any idea why after peddling and im just coasting my rear rub makes a light grinding type sound? It's not to harsh of a grinding sound just more like metal on metal sound and i can make it stop by moving the cranks a little bit. Also keep in mind I'm brand new to bmx and all my knowledge has come from you guys and thank you guys for these video's!:) ps it's a standard cassette hub not one of those fancy pants hubs
I always brake clean or carb clean my headset bearings when they start to creak or feel slow when they've been sitting I take the headset off clean the head tube top and bottom then take the dust shields off the headset spray em with brake clean/carb clean till all the grease is out let spin em and dry them then I put a bit of lube to coat the races first this prevents the bearings from worn down because some times grease is a bit thicker and is a bit slower to penetrate or coat the bearings then I grease em then put the shields back on and ever since it's kept my headsets fresh and smooth I always spray brake clean or lube on a paper towel then wipe the hub teeth then lube em up a bit then use grease This is important for Madera or profile hubs or any hub in general because the profile or Madera rear hubs come dry on the engagements and pawls and do have a bit of machining residue or lube they used for storage
@@AlfredoMancuso much love and support always from Trinidad and Tobago bro 🇹🇹we're lockdown here still about two to three months now hopefully opens back up in July so I can ride with my bros
1. Check your air in the tires (psi).
2. Check your spokes.
3. Check/lube your sprockets!
4. Check your brakes, lube em up.
5. Lube the gyro area.
Lubes bike
“Give it some love” 😂 I felt that
What lube was that? 02:43
Tri-Flow@@SavageAudits
I love how much passion and love can be felt from his voice explaining basic things ❤
Used to race in the late 70$ early 80s. After raising the kids I find myself getting seriously back into the whole BMX lifestyle; your vids and advice have been huge help. Thanks a ton you guys.
I love these vids! Thanks bro. You and the Phu crew kick much ass! Keep being Epic!
🙏🏻🙏🏻
Phu is right the colder temp sauce prevents the sauce from really coating your tongue the more warmer the sauce the easier it's going to sleep in your tongue
“Down the hot” my favorite line from any Asian person thanks for these great vids
For me tire pressure makes all the difference I'm with phu
DUDE! HOW MUCH FOR THEM white GT dyno swoosh mags?? Seriously hit me up
as road cyclist, love how you can squeeze the top tube on the stand 😂😂
Can yall do a video on getting back into bmx after years what parts should be replaced & maintence on the bike too thats also been sitting for years
Literally, do everything he just showed you. But there's nothing better than Nrw Bike Day...
That’s a good one! Thanks!
Replace tyres, inner tubes, lube chain & and replace brake cable inner then see how it goes and the bike will tell you what else needs doing.
@@mikehagen3785 truedat
For the lining part can you use chain lube or do you have to use a certain lube
Even if tightening the spokes gives your wheel THAT much of a wiggle you can pretty much eyeball it and look up a RUclips video on how spokes work.
Everything is better with lotion 😂😂😂🤷🏾♂️🤣
Known fact
" It goes in the crack "
Damn that second tip though that's what i needed to hear because my spokes are noisy. But when I feel them they are really tight i am wondering if this fix will still work for me?
Might need to get them just a hair tighter
Nipple lubricant. Just a drop on each spoke nipple, once a season. This will keep your spokes happy, and will prevent seizing.
Also where the spokes rub together can make noise if they are a bit older!
You could try rubbing a little candle wax on the spot that the spokes cross.
Danimal checking in
What upppp
needed this thanks
Knew someone might!
Any advice on straightening bent frames? Is it worth it??
No it’s junk
Do not even try it..That frame has stress just like a helmet when you crash,even if you bend it back or can't see it,it already lost its integrity the metal is weakened
If it's an aluminum frame, forget it.
winter here in new zealand but the tips help no matter haha
💯🤝
great vid Alf
Thanks Derek!
What whoud you chose oil or grease for the ong run or witch is better for what
Oil your chain, grease everything else
Triflow
Brother what is faster 52t sprocket and 18t cogset?
Great video!
Sometimes I even put it in this little crack right here 😂😂
Lotion 👍 always works
I’m waiting on a black sleeper frame
End of summer
CAN I USE 3IN1 OIL? on the joints? cracks, etc.
Great info!
I was waiting for Phu to pull out the pinchers of help..... "look guys.. pinchers of help" haha Goonies fans will get it.
Pinchers of power!! lol love that…. Imma go watch it right now
@@eelson2 hahah we both had it wrong. data says "pinchers of peril" i was way off haha
@@draleigh8881 hahaha we both win cause we both got to watch it again!!
I feel like the cap Sason inside of the hot sauce at room temperature could potentially make the hot sauce seem hotter I’m not a professional but I’ve been growing extremely hot peppers out here in Las Vegas and people get back to me saying the hot sauce is not that hot after they’ve kept it in the fridge raider for more than 24 hours thank you for making these videos
I love hot sauce! Great theory on the sauce temperature
Good stuff.
Where is your bike shop located in California??
What’s that lube called that u use? Get at me plz
Grease is cheap parts are not, thanks for sharing. Lube it or you abuse it.
I have a bike problem but my bike shop near me have broken my parts before and IDK what to do crank bolts are tight as and rounded at how do I get them out
My bikes dialed almost but my rear tire keeps getting wobbly after I ride then I tighten it then it gets wobbly again
Is it the hub/axle coming lose? Or the bolts on the outside of the dropout slots?
Might need a more thorough truiing
Wheel or tyre?
Where your shop at??
16483 Magnolia St. Westminster, CA 92683
Intresting 🧐
✊🏽
How can I make my 29inch GT FASTER
What do I do if my bike slows down real quick when I stop peddling? Sometimes it rides ok but most of the time it feels hard and doesn’t wna coast as much what can I do? It’s a fit bike 20”??
Brakes catching the rim?
Wheels tightened too much crushing the bearings?
I got a Bmx from mafia, it’s a kush 2.5. It has an integrated gyro brake system and I can’t find how to adjust it ANYWHERE!! Can you help?!? 😳
ruclips.net/video/3wxMK6vrYOg/видео.html
@@AlfredoMancuso 🙌🙌🙌
I love harry main!
Hell yeah 🤘
My guy!
Can someone out there explain to me how to get a front wheel centered when reinstalling? No matter what I try for both my 20” and 24” bikes, it’s the same result after many, many attempts. There seems to be no rhyme or reason to it, and it’s immensely frustrating. I don’t see any vids on this anywhere.
I have a shadow optimized freecoaster and I tighten everything and there’s some weird sound when I drop test it
Free coasters have a ton of play and it also depends on what type of internals your fc has aswell try using Grease
@@juliangaribay4711 I did grease it and the spokes are trued I don’t know why It sounds like i didn’t tighten the locknuts
@@rudylopez5541 it's most likely the internals they use some fc hubs come super loose stock out the box go to the shadow website for hub info and how to adjust slack or sometimes if the hub uses poly bushings they're probably blown out or wore out and making it loose that's why it makes that loose sound also sometimes if you're frame is warped on the drop outs when you drop your bike it'll make a creaking sound because the bolts shift on the dropouts
But yeah fc hubs usually have alot of play in them because of the internals or slack adjustment most likely it's the clutch rattling inside of the hub ask others that have your hub ask them if they're hub has a ton of play or slack but typically all fc hubs have this problem aswell the planetary hub or bsd hub use similar internals just different dimensions or features these hubs are new and use different internals conpared to primo stranger bsd federal etc hubs that use like a khe fc internal style yeah these hubs do have differences but typically use similar internals because it worked and wasn't hard to understand the internals and back then fc hubs were still being developed and was kinda hard to really advance the engineering on fc hubs... always check specs and features before buying parts
@@juliangaribay4711 everything’s tighten and then I get my bike and shake the wheel it’s nothing from the inside I think you probably just have to really crank down on the lock nuts because I watched a RUclipsr talk about it
@@rudylopez5541 did your hub have a washer or spacer between the locking ? If it's missing that washer is needed
I leave my wheels to my bro at local bmx shop , but I break my bikes down and clean and re grease them all up …. Ah I do do my bearings and axles with my wheels just not spokes or build . I have a fleet of 6 , 5 mid school Hoffman’s, and a haro flair
I am today years old when I noticed the crank arm drawer handles.
My guy
Tri Flo!
Where can I find that lube ?? Name ??
Tri-Flow
The dude recording is funny.
How are some ways to make you chain quieter/remove poping, creaking. besides lubricating it. I've tried many times and nothing works
if its like one of those cheaper 410 or 510 chains they're bound to making bad sounds n stuff without lube, the only solution I would know is buying a new chain, otherwise u may have to keep lubing it. Old 410 chains dry up extremely easily and stretch.
That can happen because the sprocket and crank are not aligned properly.
Chain specific video on here
Lube it
Just a lil bit of lotion my Brochachis 😎😎😎
😂😂😂
anyone knows why my cranks keep coming loose ?
Work it into the crack but use some luuube then?
Seen the bald guy on panzas vids he is fire on a bmx 👍
Trying to get back into bmx but everything sold tf out..
I got a question... any idea why after peddling and im just coasting my rear rub makes a light grinding type sound? It's not to harsh of a grinding sound just more like metal on metal sound and i can make it stop by moving the cranks a little bit. Also keep in mind I'm brand new to bmx and all my knowledge has come from you guys and thank you guys for these video's!:) ps it's a standard cassette hub not one of those fancy pants hubs
Crushed wheel bearing maybe.
I always brake clean or carb clean my headset bearings when they start to creak or feel slow when they've been sitting I take the headset off clean the head tube top and bottom then take the dust shields off the headset spray em with brake clean/carb clean till all the grease is out let spin em and dry them then I put a bit of lube to coat the races first this prevents the bearings from worn down because some times grease is a bit thicker and is a bit slower to penetrate or coat the bearings then I grease em then put the shields back on and ever since it's kept my headsets fresh and smooth I always spray brake clean or lube on a paper towel then wipe the hub teeth then lube em up a bit then use grease
This is important for Madera or profile hubs or any hub in general because the profile or Madera rear hubs come dry on the engagements and pawls and do have a bit of machining residue or lube they used for storage
I replace the bb or headset lower bearing as soon as they make the slightest sound or feel tight. 😃
@@robertlund5694 try this method before throwing out bearings
Bro. It's called a comma or a period. Utilize them, on occasion.
@@spacetimeworm I ain't your bro first off
@@juliangaribay4711 .........
So you’re basically saying “it puts the lotion on its skin”
Dude, you're rich. Buy a 1440p camera already 😄
fr i will watch some his videos then click off bc of the quality
My aunt needs to be locked up please tonight! My house is already paid on waiting for my aunt to pass away.
MT juliet on my st Arch
💯💯💯🔥🔥🔥👌
My dude!
@@AlfredoMancuso much love and support always from Trinidad and Tobago bro 🇹🇹we're lockdown here still about two to three months now hopefully opens back up in July so I can ride with my bros
🙌🙌🙌🙌🙌🙌
Damn i’m early
✊🏽✊🏽
It puts the lotion on its skin, or else it gets the hose again
😂
Why did you buy comments
We didn’t do that lol
@@AlfredoMancuso damn, these bots crazy
Dude this ain't hacks, it's just ordinary bike maintenance
Ya foo better be good😑 #justiceforfoo 😑😤✊
💯✊🏽
“Down the hot” my favorite line from any Asian person thanks for these great vids