Spoon Twinblock Caliper install on EK Hatch
HTML-код
- Опубликовано: 11 сен 2024
- Installed my new Spoon Twinblock caliper on the hatch! Enjoy!
Coinbase Free $10!
Link - www.coinbase.c...
Need help with any type of project?
Link - fvrr.co/3DPiJWp
My PC Build!
NZXT H510 Elite Case - amzn.to/3j6byRN
Sapphire Radeon 5700XT - amzn.to/3vjk7h0
AMD Ryzen 7 3700X - amzn.to/3vkQ8Fi
NZXT Kraken X63 Liquid Cooler - amzn.to/3lMYJxu
Samsung 970EVO Plus 1TB SSD - amzn.to/3pdvNki
Corsair 850W 80+ Power Supply - amzn.to/2Z32oyC
Corsair 32GB RGB Ram - amzn.to/3DRkbr8
Peripherals!
Dell 32inch 4k Monitor - amzn.to/3aMQY4c
AOC 27G2 Gaming Monitor - amzn.to/30pbBS3
Logitech G Pro Mouse - amzn.to/3DSR9ay
Keychron K6 Keyboard - amzn.to/3AUOZ8t
The equipment I use for the creating these videos!
Macbook Pro 13inch - amzn.to/3E4WNa3
Sony A7S III - amzn.to/3FOo8yG
Sony 10-18MM Lens (Wide Angle) - amzn.to/3p7rLtL
Sony 50MM Lens - amzn.to/3DM14yT
Canon G7X Mark II - amzn.to/3n2yvX5
Canon G7X Mark III - amzn.to/3mZTSZb
Rode Video MicPro - amzn.to/30uigKJ
Rode Video Micro - amzn.to/3E4WfRx
Sandisk 128GB SD Card - amzn.to/3paAvzf
Tripod - amzn.to/3mZOSDL
My Social Media:
Instagram - / latommyla
My Store:
Bigcartel - latommyla.bigc...
Monoblock vs Twinblock:
Twinblock - EK9/DC2R *282MM Rotor
Monoblock - ZF1/S2000/TSX/CL7 *300MM rotor
*(Monoblock fits EK9/DC2R but requires 300MM rotor)
Spindle/Kunckle Difference:
EX/SI/CTR/ITR/GSR Knuckle
*EX/SI/GSR - Stock 10inch (262MM) rotor
*CTR/ITR - Reuse 11inch rotor
*(If your car has a factory 10inch rotor, these calipers will fit)
Rotors needed:
2007+ Mini Cooper Base Model
*4x100, 280MM rotor, 64.1 center bore
Social Media:
Instagram - / latommyla
Snapchat - @latommyla
You do the honda community a favor my good sir! Hope to be able to afford super nice name brand stuff some day, great job on the instructions! If i knew less this video would be very helpful, great detail!
Thank you man!
Man, those spoons would look good on that white 4 door too.
I hellla agree
Damn Tommy, you never seem to disappoint with your mod choices.. Beautiful
Always gotta step it up a notch, and thank you!
LATOMMYLA.. Very Welcome Homie, keep killin it
I literally just put a fastlines shifter & a Spoon knob in my ek racecar & then hurried upstairs so i could watch this! Lol awesome vid
Ayeeee, hopefully you like that new setup 👌
There really is something special about Spoon Calipers. Congrats on the purchase / Install.
There is, thanks!
Patriots lose and now some LaTommyLa?? What a time to be alive!
Haha!
N47_Media haha, love this comment!
bro how tf dont you have more subs or thumbs you've got soooooooooooooooooooooooooo much good content
shit not to mention a real dope build much cleaner than anything here in chicago
I don't know, most people come and watch but don't sub haha! And thank you man!
damn stay killing the game God bless bro love watching your channel and the only guy that do reply major help also when I was in Japan thanks homie
Always man haha and glad you had fun out there!
LATOMMYLA hey thanks to you
Holy shit dude the Spoon calipers goes pretty well with the color of your car and the bronze TE37
Yup! Had to do it!
LATOMMYLA I can just imagine a rolling shot of this
What are the size of your wheels?
You guys are real JDM dudes, very cool.
Damn that spoon setup 🔥. Great info as well.
Finally something good to watch
Enjoy
Sunday night uploads!
Yessss sirrrr
Awesome stuff bro like always. Keep up the good work 👍
Always man!
And they say the super bowl was supposed to be entertaining i rather watch latommyla instead, wat up big homie, givin us dope content as usual, the hatch lookin good as fuck bro.
Haha thanks man!
The twin blocks will fit on 97-01 preludes as well.
Love your Honda bro! I need some new calipers for my rsx and I'm thinking about going with spoon also
Thanks man and do it! They look soooooo gooood
5:35 trippy looking dripping
I noticed that when I was editing, looked trippy as hell haha
*_Oh hell yeahm I definitely need these._*
Shit is looking SWEET! Good job tommy! 😎👍✌
Thanks!
Super sharp!
Great video bro. I want to now what pads fits in the caliper? What model pads
Wow RUclips actually notified me this time🙄
But yay a new video🙌🙌
Its a sign haha! And thanks for always watching!
LATOMMYLA is it possible you can help me? I'm trying to get a 6pistion calaper on a 15" rim and I'm having no luck. I'm looking for any brand except willwood because your exact reason(you want to use any pads) and price isn't a factor
Please help🤞🙏
Beautiful setup!
What size are your Volk TE37s?
those mirrors oh mahh guddd :O
Oh guuddd
Dope video tommy, but I just got quick question. Do Spoon calipers not recommend greasing the back of the brake pads where they come in contact with the pistons? I didn’t see you do it, so I’m just wondering lol
Thanks man and you don't need them, even on my wilwoods I didn't
LATOMMYLA Oh that’s interesting, but forsure man, thanks for the info.
"9 inches, tiny"........get you!Nissin make wicked calipers.
Ahahaga
I was thinking about adapting these calipers to an electric F56 Mini Cooper, I would need a caliper adapter though.
did you have to run a 3 mm spacer behind the rotor at all? i’ve seen a couple post with people installing with the spacing
nice TE squad, waitng for your notif, hahaha!
Hell yeah!
Dude, stake those axle nuts! Those things can back themselves out and destroy your wheel bearings.
Big boy upgrades
Always!
Great video brotha, very informative.
Are those 15x8 TE37’s on yr brothers Civic? Love the way the Continental’s look on them. Not as beefy as most other 205/50’s
Where are your stud spacers at?? Yes they do matter. Purchase them and install them
Is the front pads bounce around the spoon calipers? I know the Spoon Twin Block uses EK9 Type R brake pads.
Hey bro did you have to run the spoon 3mm inner spacer behind the 2007 Mini Cooper rotor? I’m doing the same setup right now . Thanks !
Stake your axle nuts brooo!!!!!
Bet time to watch the inspiration
Ayeeee
Better off with the wilwoods but it's is good you can run oem pad doe so that's a plus.
Did you upgrade/modify your master cylinder or brake booster in any way to use four piston calipers?
No need to, only change out the prop valve to a 40/40 cause rear disc brakes
Great Video Man, what do you have to say about comparing the wilwood brakes to the sports spoon brakes ?
Do you encounter clicking noise during reverse n bad surface road? I heard that was normal
FYI the new bolts from Honda are clear zinc plated :-) back in the day they used yellow.
Didn't know but I miss the yellow zinc, looks better imo
Nice. Wish spoon made rear calipers.
They should, Ive seen people mount them on the rears but super odd haha
hello, I am subscribed to the channel and would like to know if the original brake pads are compatible with the spoon twin block calipers…
You will need ITR pads
@@LATOMMYLAis it normal that u hear the pads knocking?
Hello what is the part number for the spoon caliper?
Did you know what size of the axle you running?? I have my d series did you think it’s gonna fit the itr spindle??
Full race car mode
👍👍
What do you recommend bro? I got a 88 Honda crx si usdm and thinking of installing these spoon calipers what set up do you recommend?
You need to get a hub centric ring , your mini rotors are sitting on the studs, they should be resting on the center hub not on the studs
Thought the same, also adding a slight bit of movement on the discs, putting alot of strain on the studs when the brakes are used
The mini rotors are hub centric, same hub size. If they weren't, I wouldn't of even used them
Didn’t look like the rotor was on the ring it looked like it was on the studs , but hey I was watching a video so it could have just looked like that
010720 pause at 16:05. You can see they’re hub centric
@@LATOMMYLAMini hubs at least for the F56 is 67mm and 5x112, not sure about the 4x100 Mini
Why didn't you keep the red ones ? I'm Looking to upgrade my breaks, I'm trying to go big on a budget ..
Did this mess with your wheel fitment/specs at all ? Looks more aggressive afterwards
Just wondering what the difference is between the old and new brake calipers ..
For honda jazz if put this caliper what size rim that suitable 15 inch offset 35 can put this caliper or not
Hell ya!
Them brakes are fantástico 👌.
Thanks!
What’s the specs on the wheels I have the same brake set up and trying to buy the rims just need the same size
I love your videos Man, if you can help me to solve a question about the spoon tongs, the weight of them is 2.4 kg for the twinblock and 2.6 kg for the monoblock, but is that the weight of each tweezer or pair? thank you if you can help me, hugs.
Have u forgot to put strew on ur disc brake
What you think will this work on a GSR Stoptech 126.34100SL rotor which is a 2007 Mini Cooper
Good job great video
What are the wheel and tires specs
Dope
Legit ! ! ! 💯💯🔥🔥
Thank you
how did you make it the mirrors to bend on it's self
Can you run the 11” Mini Cooper rotor with stock integra calipers?
LATommyLA, can i use them on the front/rear of my ek9 hatchback type r?
Do you know which Wilwood caliper will fit a Civic Si 02 rear?
Where can you get the twin block spoon calipers?
what are you going to do on the rear?
Do you not fasten those rotors to the hub?
Do you recommend these for Circuit racing??
Love the spoons! What’s the name of the song??
What brakes do u use on rear?
I have a 2000 civic ex coupe, would these brakes fit on it?
Yes it will, just need a bigger rotor!
282mm?
Hi sir, what type brake pad u use?
i want ask u... your rim what spec ??
Is the same for the EG ?
Do they make rear spoon calipers?
Which is better? Wilwood or Spoon?
You needa punch a crease in that axle nut
TE37 sonic ET45 works? i think spacers are needed
Will this fit on a EG8/EH9 sedan?
Hi ! I'm running with an EP3 on track and now i'm wondering about upgrading my brakes. I'm wondering if it is worth :
1/ changin the rotors and pads but keeping oem calipers ;
2/ upgrading for spoon calipers and staying on 300mm rotors ;
3/ buying a big brake kit (which is much more expensive, and with probably more expensive disks and pads in the future).
I can find spoon calipers for only $600, but will i get a significant improvement without upgrading the disk size ? Thanks in advance for your advice !
You will segificantly reduce unsprung weigt to the car, you can apply more force to the pads and you will have a more rigid caliper. Upgraded brake pads is highly recommended for track use because of higher temperature..
Can you do my brakes? How do I contact you?
Is it ok for the rotors to be sitting on the studs and wiggle like that? I don’t know much about cars but it seems odd.
The rotors are hubcentric, same goes to running wheel spacers on extended studs.
Let me know if u sell them wilwoods
spoon kit + accessories cost 2600€ here , with weak dual block construction , no dust cover and standard DC2 282x23 discs . On the other hands D2 made a full kit with all you need for 1400€ with forged monobloc caliper , dust cover and lightweight and bigger 286x26 brake disc AND the choice of plenty of racing brand for brake pads or disc compatibility like AP racing , Pagid etc... Why the hell do people still buy spoon stuff , it's not like they still are the only one who sell Honda tuning parts those days .
do you know if i would need to make any modifications to install these on my EH3?. other than bigger rotors
I think you will have to cut the dust shield also, but I would do some reason to make sure first for your chassis
you had some rubbin' on the inner walls? maybe because of the tire size?
Yup
How much for ur old set up
😍😍
Yo Tommy next car should be (9th gen SI FB6)
Where did you brother got them folding mirrors from?
Bought them on eBay couple years ago
👍👀
What lugnuts you running i’m looking for a quality set also
J's racing
4door ftw
I'd rather do an NSX swap considering these are like $1200...