The one of the reason I like spoon and mugen so much is cause they're basically high performance OEM parts. You get a upgrade and the reliability of OEM parts.
I completely understand not wanting to track the hatch. I'm the same way with my purple coupe. Just a fun street car. My ek coupe is gonna be the "track car".
I started with Honda’s back in 1999/2000 and I must say this car is one of the cleanest I have seen man. Really enjoying watching this build. Thank you!
I am in Florida I have a full b16b swap with lsd and a chase bay harness with Ecu. When your ready for it I have one I went k instead with my ek. I respect your builds quality always over saving a little in the long run. I a 99 Si coupe shell also. I have many Jdm parts that would shock most that are not doing anything for me. I’m glad to see the following your Chanel is getting keep building your dream I will be starting a RUclips channel for my 93 gsr rhd. I have built 5 or 6 hondas from ground up and your Chanel is a big reason. Keep up the quality and watch the Chanel rise.
FINNALLYY a Honda channel......when i found out it was all Honda, i literally watch all your videos. Keep it up man. I miss my hatch....but had to let her go.
Great buy Tommy! I just wanted to let you know that I couldn't fit my te37's with my spoon twinblock because it will rub against each other. Assuming you have the same offset as i have. But probably you already knew that. Can't wait to watch the video with the calipers installed!
When u said,guys the channel is growing and then your started like choking and voice started cracking i was like yo this fool about 2 cry man!thought u was getting emotional about the growth of the channel!but u said you were sick! Shit just seemed funny 2me! 😂👍✌
Do the itr pads overhang the rotor? My current setup is mini rotors, itr calipers and tsx pads to compensate the 2mm difference. I'm curious if you have pad overhang because I'm looking into some spoon calipers. Thanks!
Love you car and your channel, bro! Can you tell me your wheel and tire specs? I know you said it a couple videos ago, but i don't speak english, so sometimes is a bit difficult for me to understand completely what people say. :) Congratz for the 19k subs!
Got a shout out over on Rocie Natvidads channel 😀. When you hit 20k subs now you think you can finally do a subs meet?!?! I would love to take a pic of your EK and my EJ in the same shot
How are you.. quick question I have 95 civic rhd With 9.5 rotors it’s a dx rotors what so I need for tha same swap you doing sorry man and thank you so much... have a great day ...
Ypu should compare the sizes of those two kinda curious how big is the Spoon calipers next to the Wilwoods 😅 Also digging the finish on the Spoon calipers
I love your videos Man, if you can help me to solve a question about the spoon tongs, the weight of them is 2.4 kg for the twinblock and 2.6 kg for the monoblock, but is that the weight of each tweezer or pair? thank you if you can help me, hugs.
do u got a mafactory lsd or 4.9 fd i got one in my s4c trans freeway drives are intense but. vtec is like .1 secs away when going 60 im like at 5 grand lol pretty much 2nd is like first 3rd is like second and 4th is like third i catch my self tryna put it in sixth but ya. lol
LATOMMYLA I would change the MC if I were you, just think about this. The ITR has a 1in MC, to have the correct hydraulic pressure for the 2 pot front calipers. The Si has a 15/16 MC to match the 10in rotor and disk in the back. I would say the stock DX MC is fine with the 40/40 prop when converting to rear disks and EX fronts. But it is the smallest MC, it's a 13/16. Brakes are a whole system, if you don't have the correct hydraulic pressure, you won't have the correct pedal feel, or the right force on the brakes themselves. And bro, a 1in MC is like $100 on RockAuto. And you just pop it in there. I suggested that too cause you're gonna bleed the brakes anyways :) Just a suggestion!
lmao! I remember you telling us long time ago in a blog that you work at Costco. I thought that was why I always saw Costco trucks whenever you were getting ready to go into work 😂 Sorry, my bad homie !
Yeah man why the hell would you take that to the track. People don't understand that on track anything could happen and you would ruin your "Flagship" of your channel!
Man I like your content a lot. I only have one question. Whats the point dropping all that money on the civic? Dont get me wrong, I love civics EKs EGs EFs but for what they are. Budget cars with decent power. With all that money you spend on this car why didnt you bought an s2000? An integra? No hate at all. Just thinking ;)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
19k subs and tommy still replies to comments 👊🏾
Got you guys
Very true
HighBeamsCrew Ain't he great?
Y'all too nice haga
The one of the reason I like spoon and mugen so much is cause they're basically high performance OEM parts. You get a upgrade and the reliability of OEM parts.
Yes sir! And cannot go wrong with the Spooonnnn
*_Hector is going to be running 3 Honda Civics… with spoon engines… AND NOS!_* 🔥
I completely understand not wanting to track the hatch. I'm the same way with my purple coupe. Just a fun street car. My ek coupe is gonna be the "track car".
Aye
I started with Honda’s back in 1999/2000 and I must say this car is one of the cleanest I have seen man. Really enjoying watching this build. Thank you!
Thank you very much man, and glad you enjoy it!
2:06 THAT Moment. Congrats man. They are beautiful.
I know right! The best feeling ever!
I am in Florida I have a full b16b swap with lsd and a chase bay harness with Ecu. When your ready for it I have one I went k instead with my ek. I respect your builds quality always over saving a little in the long run. I a 99 Si coupe shell also. I have many Jdm parts that would shock most that are not doing anything for me. I’m glad to see the following your Chanel is getting keep building your dream I will be starting a RUclips channel for my 93 gsr rhd. I have built 5 or 6 hondas from ground up and your Chanel is a big reason. Keep up the quality and watch the Chanel rise.
Big balla bra, spoon anything for me is a dream rite na u stay on yo shit man much respect brotha
Thanks!
Man those are beautiful!!! I am a huge Spoon fan too, I will rock those one day!
Get someee!
This guy has everything I dreamed of and had in my cart on JHPUSA when i was a kid
Congrats on 19K and those CALIPERS ARE SO SICKKKKKK 🤟🏼🤟🏼🤟🏼bad ass
Thanks man!!
I completely feel you on your street/show car
it’s so nice and you got soo much work on it ya know? Good idea on the beat up track car one day
Yeah, no point in ruining my investment haha
The channel keeps getting better and better 😁
Thanks!
FINNALLYY a Honda channel......when i found out it was all Honda, i literally watch all your videos. Keep it up man. I miss my hatch....but had to let her go.
Thanks for checking it out!
Don't track it man, get that new shell for sure buddy!! Keep this baby looking super smooth!!
That was the plan right when I picked this shell up haha!!
Luckily C's company in Japan is no longer available but now it's C's in the US. Can't wait to see the Spoons on the EK.
d-series is 150lbs lighter than a b swap .that's why I'm keeping the d16z6 that came originally in my ex-v eg sedan eh9
Great buy Tommy! I just wanted to let you know that I couldn't fit my te37's with my spoon twinblock because it will rub against each other. Assuming you have the same offset as i have. But probably you already knew that. Can't wait to watch the video with the calipers installed!
I think you have the wrong specs and offset as me, they clean 15x8 +35 te's
LATOMMYLA you're right; I have a 43 offset and yours is a 35 like mentioned! Mystery solved...lol
*_Gotta get these for my 97 Ek hatch 🤩_*
Bro you just gained a new sub great work on your build I miss vtec but I love my Evo
Thanks man!
spoon would sell oil for 500$/qt if they could
They probably can but I wouldn't buy that haha
This guys growing fast! Sickkkkk
Haha!
Super big fan of your build man 💪🏼
Thank you!
When u said,guys the channel is growing and then your started like choking and voice started cracking i was like yo this fool about 2 cry man!thought u was getting emotional about the growth of the channel!but u said you were sick! Shit just seemed funny 2me! 😂👍✌
Haha, had a sore throat! LOLOL
LATOMMYLA hope you fell better man! Just messing wit u my dude! But i really did think dat 4 like a split sec bro! Good shit tommy,as always!✌👊
Too much Spoon... go Fork lol
Lolol
19K! I remember when you hit 10K! That was fast!
Yes sirr, all thanks to you guys!!
Do the itr pads overhang the rotor? My current setup is mini rotors, itr calipers and tsx pads to compensate the 2mm difference. I'm curious if you have pad overhang because I'm looking into some spoon calipers. Thanks!
They don't, the fit perfectly with the Spoon calipers, just installed them
Damn tommy, smart decision. Makes me rethink if I want to track my daily
All personal preference man!
Ooooh LORD HAVE MERCY😍 those calipers tho
I know right!
Congrats 🍾🎊🎈
Tyyyy
Can't go wrong with spoon tommy
Never can go wrong with Spoon
2007 BASE cooper not S. 280mm. they work with all integra spindles not just gsr and itr as well as ex/si
Man you had unlimited upgrades!!!
Always trying to push the build further!
lovin' it! always waitin' notif squad here!! :D
Love you car and your channel, bro! Can you tell me your wheel and tire specs?
I know you said it a couple videos ago, but i don't speak english, so sometimes is a bit difficult for me to understand completely what people say. :)
Congratz for the 19k subs!
Thanks man and 15x8+35 225/50/15
I wanted to buy your wilwoods but now I gotta buy a new quick release cause someone stole my hub and back half of the qr.
Do what you gotta do!
THATS CRAZY
I SAW THAT GUYS THREAD TOO AND IT WAS SUUUUPER LONG
RIGHT! AMAZING BUILD!
PROPS ON YOUR BUILD
#goals
Got a shout out over on Rocie Natvidads channel 😀. When you hit 20k subs now you think you can finally do a subs meet?!?! I would love to take a pic of your EK and my EJ in the same shot
Oh what! And Im not sure if I am going to be hosting a meet
Which spoon calipers should I get for the db2 / DA9 Integra?
The battlecraft ek is a B16b things sweet
It is!
I believe you in Tommy, auto to manual track car in under 10 days. Beat the record hahaha
Can't wait to see the new Japan videos ✌
Ayeeeee
Oooooowwweeee Tommy looks g good looking good me we this for my s2000..next keep up the work ..😎😃💪👌👌👌
Thanks!
Where did you get your front and rear bumpers?
Oh shiz I'm late. But anyways congrats on 19k bro!
Late upload thats why! And thanks man!
How are you.. quick question I have 95 civic rhd With 9.5 rotors it’s a dx rotors what so I need for tha same swap you doing sorry man and thank you so much... have a great day ...
Wow ur brakes worth more than half ppls car in this post lol
Thats mean to say haha
LATOMMYLA sad but true
I’ll use it as inspiration
Do you, makes sense. 🤙🏼
Always!
Would you know if i would have any issues running the spoon calipers with enkei rpf1s 15s 4x100?
Dope keep it up I get it 2 cars 1 for track and 1 for the streets! Are you still going to try flexfuel on the honda?
Thanks man and flexfuel happening probably end of feb
B16B awsome man!🔫
Ayeeee
Ypu should compare the sizes of those two kinda curious how big is the Spoon calipers next to the Wilwoods 😅
Also digging the finish on the Spoon calipers
Way bigger but I will compare in the next video!
LATOMMYLA nice can't wait and keep the awesome contents coming! 👍
I love your videos Man, if you can help me to solve a question about the spoon tongs, the weight of them is 2.4 kg for the twinblock and 2.6 kg for the monoblock, but is that the weight of each tweezer or pair? thank you if you can help me, hugs.
Why spoon parts? Are they Superior to other quality parts?
i love how volks fit perfectly with spoons its just anything else dont really fit. cause there huge. lol
I agree
Is this front and rear or just front
Eyegasm
Have you thought of getting Uel headers?
Not a fan of those on Hondas
How much money do you have in your build / hatch? I have 10k in my 93 civic si and still more to do ...
Way too much to say haha
im going to japan in march im going to stay in tokyo whats a cool place i can go see ?? LAOMMYLA ??? is upgarage close bye tokyo ???
Type One Spoon is in Tokyo!! and Feels!!
I’m still waiting for a clean white eg hatch 😭😭
voice crack at 0:48, but nice video as always!
Lolol
Bro i have a question. Where do i find the parts to convert my rear drum brakes to disk brakes on my honda civic 02 ex? I can't find any kits online.
Renzo Rossello JDM junk yards
whats a reasonable price?
Savage🤘🏽
eg or teg for next car?!
Hmm not sure yet
1 day I'll have those on my car...:)spoon
Yo when you putting that car on track. Quality parts. Love the build.I follow you since day 100 . But is it a show car or track car?
Mainly street car, track car coming up, and thanks!
did you even watch the video? he explains his intentions in detail smh
blandsarcasm yes I watched video. Thanks. Still got love for the boy. I commented before I watched in full. Was hype for the boy and those calipers
Hey how much is the 2000's si going for in Cali over here in New York the prices is crazy I might just have to get another EX
Expensive as hell
Damn 🤦♂️
wooooot woooot spooon clappers hell ya. u know what would be dope some toda cams u know u wannnaa X_x
do u got a mafactory lsd or 4.9 fd i got one in my s4c trans freeway drives are intense but. vtec is like .1 secs away when going 60 im like at 5 grand lol pretty much 2nd is like first 3rd is like second and 4th is like third i catch my self tryna put it in sixth but ya. lol
I have toda cam gears if that count haha
hell ya i got some spoon og cam gears :0
Are you going to change your master cylinder and booster? Or do you still have the stock one?
Don't need too, still running stock with 40/40 prop valve
LATOMMYLA I would change the MC if I were you, just think about this. The ITR has a 1in MC, to have the correct hydraulic pressure for the 2 pot front calipers. The Si has a 15/16 MC to match the 10in rotor and disk in the back.
I would say the stock DX MC is fine with the 40/40 prop when converting to rear disks and EX fronts. But it is the smallest MC, it's a 13/16.
Brakes are a whole system, if you don't have the correct hydraulic pressure, you won't have the correct pedal feel, or the right force on the brakes themselves.
And bro, a 1in MC is like $100 on RockAuto. And you just pop it in there. I suggested that too cause you're gonna bleed the brakes anyways :)
Just a suggestion!
Oh yeah
are you going to be selling the willwoods????
Already sold
LATOMMYLA unlucky, ill be waiting for your next vid
did u get the yellow spoon brake pads?
i love em just a lil squeeky cause race pads lol
Naw, way too pricey haha and they leave a shit ton of brake dust, bought EBC green stuff
Sick
is it posible to go 6pot front on 15"?
also what brand? please help
nope
blandsarcasm 💔💔💔
J’s Racing ftw
Paolo Inigo what do you mean?
ARCH. M yes it is possible to go on a 6 pot calipers from J’s Racing on a 15” rims as long as you have a full EK9 Type R suspension
How much for wilwoods
Will be posted on my instagram when they go for sale
Get a prelude
Don't forget the soymilk
Always son
Damm spoon
Yes forks
What's the point of all that spoon stuff
Passion
What do you do at Costco Tommy?
I just shop there since I dont work there haha
lmao! I remember you telling us long time ago in a blog that you work at Costco. I thought that was why I always saw Costco trucks whenever you were getting ready to go into work 😂 Sorry, my bad homie !
Spoon!!!!
Fork!!
When’s Bernard coming back
September sadly :(
too legit to quit
yeeeee boiiiii
Do a k24 swap
Andrew V word up I love k series
Save the B
No
my 97 D-series has only 195k km on it ....lots of life, i think I'm gonna buy a k24a2 like @childstar but actually instal it in the year 2020
My old single had 210k and tracked it haha
God damn bro when I grow up I wanna be just like you! Wait I’m 36... how old are you? Crap
Im 24 haha, its okay!
upload time is so late :( oh well
morning videos are cool but evening uploads are better
Yeah, kinda just randomly wanted to upload the video!
Yeah man why the hell would you take that to the track. People don't understand that on track anything could happen and you would ruin your "Flagship" of your channel!
Get an ABFAB catch can. He does amazing work. His IG is @A.B.FAB
Ill check it out!
Man I like your content a lot. I only have one question. Whats the point dropping all that money on the civic? Dont get me wrong, I love civics EKs EGs EFs but for what they are. Budget cars with decent power. With all that money you spend on this car why didnt you bought an s2000? An integra? No hate at all. Just thinking ;)
Billblackeye EK, EJ6 Hatches are good on track plus bigger engine bays than DC5s
yeah I know but that is not a track car
Car enthusiast.
Thanks for the answer. I guess it is the bug.. You get hooked and cant stop spending money on it..
Less talk, more work
Klas Medak less bitching, more watching
Agreed
Would this fit on a DC2 1999 gsr?