The inspector looked at the car, saw it was clean and just passed it lol. The car look like it came from the factory like that. Good job on such a clean build.
Back then in 2000s my cousin was one of the first to get a ek barded with a b18c and they didn’t put c1 or anything just b18c so that means he’s can throw any kind of b swap with out getting in trouble because it says b18c
I got a JDM B18C1 BAR’d a while back on the first shot. Not sure what laws are like now in 2019 but its possible to your motor BAR’d - just have to do your research. Congrats!
My 94 civic I got it bard and had a b18a out of a 93 xsi integra I'm in Bakersfield cali and it passed my 2002 tax type s k20a type r swap was a bitch to get bard
Shoot here in Nashville, Tennessee we don’t have smog. If you don’t have a check engine light you pass lol other counties in Tennessee don’t even have emissions
Hey man gratz on getting the car passed! Must be feeling good , i'm from canada and i'll say that i'm feeling good about not worring about all of that haha😅. Got the same motor in my hatch 🔥
Awsome, bro ! Gratz on having this done, it looks so so well built ! You know, we have these engines in BR coming since the 93/94 EG6, and later in 97/98 EK4, like mine. Besides they came from Japan ou version is called VTi, not SiR like theirs. Question: if u used a 99/00 engine like u said, why does the sticker shows 97 B16A2 in it ? Was it imported ? Have a nice one 🤙🏼🚗💨
This is great information and congrats on your BAR. Did the inspector ever look at the transmission for any reason? So i have read that it has a same year or newer engine, but will it matter that the engine i have is a B18c1 engine from an Intergra GSR? if you can answer this, that would be great. Thanks
I’m so close to finishing my h22 swap ek hatch. I’m only reading bank 1 and 2 o2 sensor and iacv circuit malfunction and I should be taking it to the bar
Ramon Preciado yeah I agree, think if you’re going to go through the hassle of getting a car bar’d mine as well do a GSR swap. I’m sure it’s not much harder?!
Yea bro might Aswell because after you put a gsr you can put a jdm gsr too but if the ref doesn’t put anything in the comments then you can use any 1.8 they pretty much all have similar emissions but it’s really simple man people think it’s hard just make sure everything is hooked on legit and passes smog and your good
My buddy just got his jdm b20 bard in a 95 civic and passed all legit so I don’t know if the ref would just be a dick to not pass you they said aslong as you only use the head and block that’s Japanese’ but you have to use the manifolds and ecu of us
@@LATOMMYLA i went to the reff to but after checking my stuff out he said for me to go to the dealership to get my ecu and some other stuff check out. Thats like couple hundreds. Everything came from a em1 to my hatch. All stock parts. Damns. Maybe i should go to LA and do it instead.
lol im glad i dont live there😆 i got a "red Delsol d16 125hp eu spec" but it is a white 160hp "usdm/jdm mix spec, legal open exhaust without cat "because oldtimer" 😆 (donor car) Worst case scenario is they catch me and i need to pay €60 for the title change lol.
Calvin Kamlley my buddy got his 95 civic coupe bard with a jdm b20 so it is possible people just don’t know and 95 and older vehicles don’t need a carb legal intake anymore
The inspector looked at the car, saw it was clean and just passed it lol. The car look like it came from the factory like that. Good job on such a clean build.
Thank you!
The mans done the impossible, congrats to you man! Men far an wide across Honda-Tech have tried to get here since the beginning of time.
Hahahah good ass comment!
I’m happy I bought my car already barred but with a b18b1.
Back then in 2000s my cousin was one of the first to get a ek barded with a b18c and they didn’t put c1 or anything just b18c so that means he’s can throw any kind of b swap with out getting in trouble because it says b18c
Oh wow! Dope! That's awesome that you're sponsored by Falken.. I love my Falken Azenis with the RGD2.
Love you videos bro do more! I it’s been so long you really changed the way I saw my car and build my rides years ago
Thank you, trying to haha!
Hey Tommy. What a fantastic job. A pat on the shoulder , you deserve it man. Great job !
Thanks!!
A MAZING!!!!!!!!
That's amazing looking. I'm having a B16A2 built for my EM1 right now. I just may have it powder coated yellow like yours.
I got a JDM B18C1 BAR’d a while back on the first shot. Not sure what laws are like now in 2019 but its possible to your motor BAR’d - just have to do your research. Congrats!
Super clean hatch 🔥🔥🔥
I...LOVE...your hatchback! Honestly, it's so fuckin clean.
Thanks!
Super clean hatch. A B18c5 would have done it more justice. Considering lack of power from the B16.
Cali with swaps is like a girl looking through your phone
Good one!
Facts
But when that girl says your her first you're really her first. Makes that carb sticker kind of worth it
I have lsvtec turbo chilling in my garage I just need to buy a shell
My 94 civic I got it bard and had a b18a out of a 93 xsi integra I'm in Bakersfield cali and it passed my 2002 tax type s k20a type r swap was a bitch to get bard
dudder86 dudder from Bako too bro bard gsr here 🤟🏼
That paint job is a beauty.
You living the dream bro.
Congratulations Tommy those Raychem DR-25 grounds still looking fresh 🤘
Thank you and yes sir, it passed inspection too haha?
Congrats on the completed goal!!!
CONGRATS BRO NICE SUPER CLEAN
Thanks!
Shoot here in Nashville, Tennessee we don’t have smog. If you don’t have a check engine light you pass lol other counties in Tennessee don’t even have emissions
Must be nice....
I love Texas. I don’t have to worry about this engine swaps
Must be nice... I live in CA 🤣
SVT BEAT for real
Congrats Tommy. One less thing to stress out about.
Thanks man!!
Yooo you did a lot to get that to pass! Can’t believe they look all the way down to the harness shit
Totally worth it in the end!
Hey man gratz on getting the car passed! Must be feeling good , i'm from canada and i'll say that i'm feeling good about not worring about all of that haha😅. Got the same motor in my hatch 🔥
Glad we'll never have these problems in Texas but at least it doesn't seem as expensive/hard to get it legal as people make it seem
It’s cheap, not expensive at all
Love the spark plug wires, but they are proven on a dyno to lose a little bit of power compared to oem plugs.
Thank you Pennsylvania we don’t have to worry about that here.
Nice congrats man, what referee location did you go to? I ask because I might need to do the same for my swap.
Awsome, bro ! Gratz on having this done, it looks so so well built ! You know, we have these engines in BR coming since the 93/94 EG6, and later in 97/98 EK4, like mine. Besides they came from Japan ou version is called VTi, not SiR like theirs. Question: if u used a 99/00 engine like u said, why does the sticker shows 97 B16A2 in it ? Was it imported ? Have a nice one 🤙🏼🚗💨
nice wheels btw 🤩
Nice in getting bard but to much hassle to just put a b16 should have gone b18 but that’s just my opinion
Only B18 I would do is a GSR, but I hate how the stock intake manifold looks...
This is great information and congrats on your BAR. Did the inspector ever look at the transmission for any reason? So i have read that it has a same year or newer engine, but will it matter that the engine i have is a B18c1 engine from an Intergra GSR? if you can answer this, that would be great. Thanks
I’ve had a 96 ek with a b16a2
Mine sheen barred for like 4 years
This car is so damn clean.
Awesome brah good work
I’m so close to finishing my h22 swap ek hatch. I’m only reading bank 1 and 2 o2 sensor and iacv circuit malfunction and I should be taking it to the bar
Nice color you choose bro.. May i know what color you have?
D16y8 harnas is the same a b16a2? And what is everything you have to extend on The harnas??
Damn your car is super clean! Is that millennium jade?
Did you put the OG 99 civic SI EVAP canister as well?
Badass color. You got the code?
Nice congrats.....
Does the stock airbox keep air intake temperatures low because it's not hot engine compartment air directly? Are you using it just for a stock look?
Finna have onr by summer bro
to easy of a swap! Set it up to a J swap! US cali boys know to how BAR a B swap in civics pretty easy.
Update ur site with more stickers! Lol looking to get a few
Like to see how the k20 swap will get bar.
It won't 🤣
LATOMMYLA is it that hard to do a k20? I really want to do it to my eg sedan but need to learn how before I spend money
Sucks he put b16a2 you can’t use any other engine mine says 1.8 so I can use any motor gsr or type r .depends on the referee
Ramon Preciado yeah I agree, think if you’re going to go through the hassle of getting a car bar’d mine as well do a GSR swap. I’m sure it’s not much harder?!
Yea bro might Aswell because after you put a gsr you can put a jdm gsr too but if the ref doesn’t put anything in the comments then you can use any 1.8 they pretty much all have similar emissions but it’s really simple man people think it’s hard just make sure everything is hooked on legit and passes smog and your good
My buddy just got his jdm b20 bard in a 95 civic and passed all legit so I don’t know if the ref would just be a dick to not pass you they said aslong as you only use the head and block that’s Japanese’ but you have to use the manifolds and ecu of us
I hate the GSR manifolds, one reason I did B16
LATOMMYLA me too that’s why I bard it with the skunk 2 one it’s actually easier you don’t have to run the butterfly wiring
I have a 95 Honda Civic EJ1 coupe. Could you provide me with all parts needed to swap a B16 or B18 engine?
What ecu are you running? I’m getting codes for p0450 & p0453. 1996 civic hatch with b16a2 and running a p2t with jumper.
What engine did you use on you 1996 honda coz i want to replace my engine to modified just make a simple modification
Quick question, is barring a JDM engine not allowed?
Did you use a jumper harness or repinned it
I have a 91 integra obd0 planing on swap. Getting a 94-95 jdm gsr engine. Can be bar’???
LBCC parking lot?
Yo what college did you go for the bar? Been on the fence doing my ls swap legit in my truck.
i had a ek hatchback b16 swapped with gsr trans
can you use the JDM engine? or only engines from the US cars
Do you have the link for the exhaust system you got ?
I dont, won it from an auction from Japan and these they dont make anymore
Sorry was asking about for that ebay system looking to use the b pipe to my stock hatchback axle to pass admission
Is it possible to get a 2000 ex barred? I heard it has to be an engine from a newer year but 2000 was the last of the models??
base on front end his ek is 96-98
Did u go to the dealer too? Or they just straight up did their thang and u pass?
No dealer, just went straight to the referee station!
@@LATOMMYLA i went to the reff to but after checking my stuff out he said for me to go to the dealership to get my ecu and some other stuff check out. Thats like couple hundreds. Everything came from a em1 to my hatch. All stock parts. Damns. Maybe i should go to LA and do it instead.
Still have your hatch? When you want to sell?
I can only dream
I have lsvtec turbo chilling in my garage I just need to buy a shell
Damnn we have the same exact paint what paint code or what us the paint called
I paid 108$ for the sticker you have. That’s cause I got a state ref.
What's that color called ?
bard not hard in cali done 6 plus cars just needs to be stock an motor needs to be same year or newer hella easy
Hey dude. Wanted tips on barring a 2000 ek. Care to help out?
@@wasco1989 sure whats up man. You live in cali
@@pandamike209 what’s up man what BAR location did you go to?
Modesto
Off topic where u get those clear frames
Hai,what green colour code ek?
what color is that
We're can I find that intake arm at ?
So since you covered your vin do you cover your license plates when you drive around every day?!?
what is the color of your car?
what colour code is your car?
Code color!?
10:01
how is the VTEC in the b16?
will a ecu ecm p30a01 work
What type of plugs do you run in your car?
NGK Iridium
Whats the offset on the front?
You gotta do this for a living I am sure a lot of us would pay for services like these.
Do you think your brother’s car can be barred with that K20 in it?
Yes it can be done.
Not the way it is currently
No way as it current state haha
Any one now the color paint code ?
Do you wanna sell it?
Soooo *BELCH* yep.
Color please
Ek
sucks to be from Cali, as long as your car doesnt have 1,000,000 miles on it, youre good illinois
If you passed cali emissions youll pass texas with no problem
lol im glad i dont live there😆 i got a "red Delsol d16 125hp eu spec" but it is a white 160hp "usdm/jdm mix spec, legal open exhaust without cat "because oldtimer" 😆 (donor car)
Worst case scenario is they catch me and i need to pay €60 for the title change lol.
No the cost should only go up 8.25$ that's what you paid for that sticker 🤣
I think you trying to sell it 🤪
8,025 pennies or 802.5 pennies 🤔
802
EDIT: 825 is $8.25
You beat me to it lol
The hole time I was waiting for correction writing on the screen hah
Lolol!!
You the man tommy I’m just playin. 😎
My son. Upload more and quick your day job
Haha can't do that 🤣
Damn must sucks to live in cali. Lol I live in east coast no emission here. I run straight up jdm legit. Lol. Jdm ftw!!
Damn it tommy why did you over pay in pennys? Your not mr. beast lol
Hahahah
Shoulda got a typeR motor lol bard
USDM Type R would be nice but insanely hard to find the correct stuff for it
Lol.. California. Good luck with that..
Nothing wrong with CA haha
@@LATOMMYLA that gun confiscation law that was just signed too 🙄
Will b20b pass bar in a integra
That's crazy I thought it would be good if everything was stock .. guess not .. hot smog time
Yea it will pass
Calvin Kamlley my buddy got his 95 civic coupe bard with a jdm b20 so it is possible people just don’t know and 95 and older vehicles don’t need a carb legal intake anymore
Man California’s regulations are stupid ... we don’t have to worry about none of that in Ohio