The C10's 10 Bolt Gets a 3.73 Posi!!!
HTML-код
- Опубликовано: 5 фев 2023
- The C10's 10 bolt gets gutted and fully rebuilt with a new posi carrier, a set a 3.73 gears and new seals and bearings.
Check out the posi kit from JEGS
www.jegs.com/i/JEGS+Performan...
Check out my other Socials
lsmitch.com 
Авто/Мото
Great video Mitch! I swear I wish I knew how to do this type of work. I’m still running stock gearing in my 83 C-10 but after doing the LS Swap I need to upgrade to 373 Posi!
Hell yeah, Im planning on doing this to my c10 too. I have a 12 bolt though but I already have the 3.73 posi from Quick Performance ready to go. Just need to find the courage to do it myself.
You can do it. Just take your time.
Hey Mitch. On a return style truck intake. Is the upper line the fuel feed (pressure from tank) ? Or the smaller curved one? I think I may have mine backwards…. Lol. Probably won’t run that way if do. Keep up the videos.
Can i only replace the carrier bearings on my gm 3.23 of a 2017 escalade and leave the penion and its bearings preload alone?
you are going to 3d print a rear diff!! hahaah
That would be cool but no lol
Cannot knock an 8.5" especially with a good posi 30 spline or more and Moser axles
Is the 3D model for a 4 link?
It was but plans have changed.....
hey guy Im in SASKATOON, contemplating buying a running driving C20, 1968 camper special
BIGGEST PROBLEM is it has 4.56 reargears and will barely do a 100km/h cuz its screaming at about 4000rpm
SO far amigos the biggest wrecker nearby has nothing that will bolt in
Got any ideas what will fit and where i can get one with 3.08-3.73 ish gears?
3.73 posi is probly the ideal but i will take anything in a streetable range mentioned