How to Replace Rear Brake Shoes 2002-2006 Honda CR-V

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/254/P/brake-shoes
This video shows you how to install rear brake shoes on your 2002-2006 Honda CR-V. For drum brakes and parking brakes, shoes will eventually need to be replaced.
This process should be similar on the following vehicles:
2002 Honda CR-V
2003 Honda CR-V
2004 Honda CR-V
2005 Honda CR-V
2006 Honda CR-V
Tools you will need:
• Pocket Screwdriver
• 14mm Socket 1aau.to/ovW/1AXAA00015
• 19mm Socket 1aau.to/ojD/1AXAA00043
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/ok/1AXAA00278
• Needle nose pliers 1aau.to/odx/1AXAA00051
• Needle nose pliers 1aau.to/odx/1AXAA00052
• 1/2 Inch Air Impact Gun 1aau.to/obJ/1AXAA00252
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/ox2/1AXAA00016
• Torque Wrench 1aau.to/oor/1AXAA00044
• Drill
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Liquid Thread Locker
• Paper Towels 1aau.to/ody/1AXSS00035
• sanding disc
• Sandpaper
• Hammer 1aau.to/of8/1AXAA00091
• Large Hammer 1aau.to/of8/1AXAA00091
• Wire Brush 1aau.to/ob9/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Honda CR-V 2002-2006 2nd Generation: • Honda CR-V 2002-2006 2...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@claybourne7162]

Another really well made how-to video! Thanks!!

[@hemtet5500]

Fabulous video one of the very best and I’m choosy.

[@phxrsx]

Did this thing sink with the titanic?

[@joepinke1823]

Thanks for the video, very professional, nice work!👏

[@ofpersaverance]

Great video

[@rahtoren6385]

Good how very informative.

[@guasal12]

Great video thanks

[@EddieNYC02]

Very interesting 🤨 thanks

[@MJ-fk6yg]

i got in the rear brakes to change rotor and pads and i'm seeing these rear drum shoes. they are just for the parking brake, right? i'm down to 2mm on those but if they are just for the parking brake, i'm thinking i'll wait since i live in a flat town.

[@lenvillemaire4751]

Great job, good video.

[@rahtoren6385]

Nay got new dpring kit.

[@matthk]

Why do the hand-brake pads have to be slightly rubbing on the drum? Surely that will cause noise, heat and wear? 🤔🤷‍♂️

[@edaguirre7267]

Ok thanks ohhh

[@vag4lvevo22]

Will this work for a 2007 crv?

[@TRQ]

+vag4l vevo This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ

[@anthonylew989]

👍👍👍👍♥️♥️♥️♥️

[@manuelillescas9387]

En usa , y cargar asi las partes llenas de oxido es verguenza

[@mattsedeensr.1712]

Yes , an amazing mess !

[@WenderlyChrisostome]

🎉🎉🎉🎉

[@rahtoren6385]

My clips broke. Pin loose and bent e shoes wobble.

[@rahtoren6385]

Horse shoe clip..... Wait cool get try my clip plairs it new tool though hand it virgin.