Thank you for sharing this tutorial. I’m so excited! I did some stickers and it worked. I did 2 with 1 additional offset to see if it would cut and it didn’t. I did 13 images with 2 additional offsets and that worked. The Cricut cut the stickers as die cuts. Now it will be easier for my grandsons to get the stickers off. ❤
Omg this took some fiddling because I was an idiot and missed a couple steps, but once I got it, it's smooth sailing!! You're a life changer!! Thanks for the tutorial ^-^
Is there anything special that needs to be done for cutting when adding a clear laminate on top of the sticker? I've seen that done in other videos, but not the three silhouettes for basic cuts (love this idea). In other words, do you still use the Printable Vinyl setting when adding the overlay? Thank you so much!
You’ll need more pressure if adding an overlay (or that’s my experience when using an oracal/oraguard combo!) I usually just do a die cut with the Kraft board setting just to be sure it goes all the way through. :) ❤️Becca
I just finished making kiss cut with a die cut stickers using a laminate overlay on top, and for me the light card stock setting did a perfect kiss cut with the three runs of a die cut. Fantistic tutorial--thanks for the video!!!
This was a game changer for me during the live yesterday. Glad I can find it much easier now when I need to refer back to the steps and this video goes though the steps in better detail. Thanks Becca & Rachel 😘
How does this work with a sticker paper that had lamente on it? Or rather, what cut setting would i use for a lamented sticker paper to make a easy peel sticker?
Wow this is amazing tip. I was going to give up and get over-priced stickers made with split back. Now I can do it myself at lower cost and lower the quantity I want/need! Thanks
So glad for this tutorial! I didn’t totally understand it during the live but now I get it. That is awesome!! Thanks Becca and the O&L Flock community!❤️🐑💚
This was the best tutorial I’ve seen about the easy peel. When I do print them cut my cricut always cuts each individual layer(chops it into bits!) what am I doing wrong?
I'm not sure if it's the paper I am using but when I print with the basic cut layers, it cuts the outside layer and the sticker so they detach. it's like the paper is too thin and can hold the outside cut. so it end up being pointless! thank you in advance for your help! I'm not sure if that makes sense at all!
Thank you for your Fab tutorial! For some reason when I add the second off set even set to cut 3 or 4 times will not cut through the backing. What am I doing wrong? I am using normal vinyl and cricut printable vinyl.
@@OakAndLamb Thank you 😊 and THANKS FOR THE REPLY. I have been wondering how to do. So if it cuts all the way through then maybe there is too much pressure??
Me either. But when I did the 3 offsets I was able to modify the 3rd offset to the contour. Then I deleted the other 2 & replicated the one I contoured. Worked for me this way 😊
Removing the paper from the back of the sticker doesn’t have to be frustrating, they sell a cutter that you can use to make a non-deep cut in the paper on the back of the sticker and makes it easy to remove.
Can you share what cut settings you used please? This was almost perfect until it was missing that step :)
Thank you so much for making this video!! It worked like a charm on my stickers!! ❤
Finally I found instructions that worked for me! Thank you for making this video 💛
I love that you've added BIG arrows!
Thank you for sharing this tutorial. I’m so excited! I did some stickers and it worked. I did 2 with 1 additional offset to see if it would cut and it didn’t. I did 13 images with 2 additional offsets and that worked. The Cricut cut the stickers as die cuts. Now it will be easier for my grandsons to get the stickers off. ❤
This idea will be great for little children, a lot easier for them
printable vinyl setting in cricut? Whoch one there are like 4. Also our cricut stops mid cut when using multiple offset. Does that normally happen?
Always learn something new. “Grid option”? Who knew? Informative video!❤❤❤
Thanks i will try this but I have a question, Why the tree offseet layers? I got kind of lost there!
Omg this is genius - thank you - I have to watch a few times to get it but I will!
Omg this took some fiddling because I was an idiot and missed a couple steps, but once I got it, it's smooth sailing!! You're a life changer!! Thanks for the tutorial ^-^
Thank you for sharing😊 This was so informative. Short and sweet. ❤
Thanks for this video - my Cricut is still cutting thru the backing on both cuts - what material setting did you use?
Is there anything special that needs to be done for cutting when adding a clear laminate on top of the sticker? I've seen that done in other videos, but not the three silhouettes for basic cuts (love this idea). In other words, do you still use the Printable Vinyl setting when adding the overlay? Thank you so much!
You’ll need more pressure if adding an overlay (or that’s my experience when using an oracal/oraguard combo!) I usually just do a die cut with the Kraft board setting just to be sure it goes all the way through. :) ❤️Becca
@@OakAndLamb thank you so much ☺️
I just finished making kiss cut with a die cut stickers using a laminate overlay on top, and for me the light card stock setting did a perfect kiss cut with the three runs of a die cut. Fantistic tutorial--thanks for the video!!!
This was a game changer for me during the live yesterday.
Glad I can find it much easier now when I need to refer back to the steps and this video goes though the steps in better detail. Thanks Becca & Rachel 😘
OMG!!! Thank you!!!! I am been so frustrated.....this is a hugh help!!!
Hi. Do I use the same method with regular shipping label paper
How does this work with a sticker paper that had lamente on it? Or rather, what cut setting would i use for a lamented sticker paper to make a easy peel sticker?
Wow this is amazing tip. I was going to give up and get over-priced stickers made with split back. Now I can do it myself at lower cost and lower the quantity I want/need! Thanks
Great tutorial!! Making stickers this way is such a game changer for kiddos. Thank you Oak and Lamb!!
🐑💜💗🐑💜💗🐑💜💗🐑
This tutorial has been so helpful. Thank you for sharing.
So glad for this tutorial! I didn’t totally understand it during the live but now I get it. That is awesome!! Thanks Becca and the O&L Flock community!❤️🐑💚
Sooooo cool! I love this. I am starting to make my own stickers and the timing of this video was perfect! Keep up the great work.
Thanks for the great video! I'm glad your live event spawned this technique! 🎉
So helpful! Thank you so much! 💗
Thank you Becca for doing this on such short notice!
This was the best tutorial I’ve seen about the easy peel. When I do print them cut my cricut always cuts each individual layer(chops it into bits!) what am I doing wrong?
Thank you 😊
Wow another amazing video. So love this ❤. Totally 🤯
Totally lost me on the offsets, but I'll watch again and again until I get it. ❤
Thanks! What printer is best for sticker paper? Mine jams
Very clear and wonderful directions! TY!!
I'm not sure if it's the paper I am using but when I print with the basic cut layers, it cuts the outside layer and the sticker so they detach. it's like the paper is too thin and can hold the outside cut. so it end up being pointless! thank you in advance for your help! I'm not sure if that makes sense at all!
This is so helpful! Can this be done with adding lamination? What setting do you think that might take? Thanks!
I wondered that too. Did you try it?
Very newbie here. Question…do I need an inkjet or laser printer or can any old printer be used? Thank you for this video.
You are so helpful
Your logo is amazing
Love this! Super helpful ❤️
Glad it was helpful!
Good Afternoon Ladies
Thank you for your Fab tutorial! For some reason when I add the second off set even set to cut 3 or 4 times will not cut through the backing. What am I doing wrong? I am using normal vinyl and cricut printable vinyl.
I’m wondering the same thing!
Genius!
How do you do a kiss cut?
Just use the printable vinyl setting and the Cricut will automatically create a kiss cut. :)
@@OakAndLamb Thank you 😊 and THANKS FOR THE REPLY. I have been wondering how to do. So if it cuts all the way through then maybe there is too much pressure??
😲Awesome!
I just tried and and WOW! Thanks so much!!!
when I get to the contour part nothing pops up and I can't make one to save my life smh getting discouraged
helpppppppp
plz
Me either. But when I did the 3 offsets I was able to modify the 3rd offset to the contour. Then I deleted the other 2 & replicated the one I contoured. Worked for me this way 😊
❤️❤️❤️
🤯
Can you do me a favor and do a video step by step on the cut and peel without all the basic Cricut stuff.
This did not work for me at all unfortunately
Doing a sticker w/ multiple colors would've been more helpful but thanks for sharing
Removing the paper from the back of the sticker doesn’t have to be frustrating, they sell a cutter that you can use to make a non-deep cut in the paper on the back of the sticker and makes it easy to remove.
thank you!