DIY Electric Longboard
HTML-код
- Опубликовано: 6 сен 2024
- Parts list:
Drive Kit: aliendrivesyste...
Motor: alienpowersyste...
XT90-Connector: www.hobbyking.c...
RC-Transmitter: www.amazon.com/...
Configuration Tutorials:
VESC configuration: • E-SK8.FR / Electric Lo...
FS-GT2B Transmitter Setup: • Video
If you have any questions, post in the comments below.
Happy Longboarding!
bruh this was 3 months ago and were still waiting for part 2 hope this guy is okay
Ik right
you see that stop?? shit would fling anyone off
6 months now... this is worrying.
think he crashed with his longboard in to a car
7 months and counting...
bruh, its been like 3 years. where is the part 2
Ikr
He die, electric failure on the skateboard and one wheel got lose and smashed himself on a wall.
@@baeciara8485 5 years later where is it?
@@colbyottati9921 where is anything at this point, his last video was 3 years ago and my god this makes me feel old 😔
You might have the best / most straightforward video on diy electric longboard I've seen. Really makes it simple to understand. Great job.
your build was alot less complicated than great scotts build video, and you didnt need to use a $2000 routing machine and a milling machine n'shit
you earned a sub
Greatscott made it by himself almost from scratch. This guy just bought all the parts an assembled them (it turned really nice though) If you really want to make something you can find a way to make it for cheap.
I really wish you continued making more esk8 videos! You actually inspired me to start an diy electric skateboard channel! Take care and awesome video!
- Neil
Wow! This video has hit 1.1 million views! Congrats :)
Big Kids fvcdwtb
I found it
This has Casey Neistat written all over this video... That being said... This video IS AMAZING! The angle, the crisp quality, the short dialogue, the quick cut clips, the angles (this is debatable), and the overall experience was both entertaining, informative, and inspirational! Great job man!
keep the videos coming man. the world needs more people like you
When are you going to do your part 2, I'm still waiting
Bring part two! By now your is the best of the videos showing how to do this entire process!
Dude I’ve been waiting 6 years checking this channel once a month 😂
How the hell am I SUPPOST to get this shit at HOME DEPOT?!?!?
lol
Haha, well, go look at a hobby shop or, there is allways the internet.
+DieMaus fuck that, im gonna do something else
Frisk The Cat okay.. You know? home depot is 35 miles away from me. i dont got a car... but i still have to go there to buy stuff for my longboard....
+DieMaus holy shit man mine is just a block away
As someone that loves to longboard to work but cannot afford a boosted board, this gives me inspiration, thank you : )
Anyone else watch this video a billion times over cuz of his soothing voice?
Bro the reason I love your channel is because the stuff you post is much more easier than others’. Hit like if you agree!!
Ooooow some Casey fan here ;) really nice. Sven if I know I can't build it 😂😂
William Pellegrino
Wow we have so much in common! FPV, Electric Longboards, and aviation! Awesome dude!
great job mister matt, casey niestat style ;)
Just saw this on my home screen, clicked it and was amazed on the quality of the video, can't wait for the part two!
Casey Neistat on a budget lol
made my day😂😂😂
Bomara
Ye, and he's doing great
You have a casey flow. Also people will tell you that you copy him but dont listen to them because your videos are amazing. And its good that you use him for inspiration.
Casey 2.0
+Luca muvca ;)
i just meant to leave exactly the same comment :)
Can't wait for part 2! Hope you can find the time to put it up, soon. Congrats on all the views, too!
So wheres part 2? been waiting 7 months...
Cam Steve now over a year
Over 2 XD
Yours looks the most legit out of all the DIY ones I have seen so far. I cant wait for Part 2.
When will you make part 2? I have SOOOO many questions!
We need a part 2!!!! You video is the best I’ve found on RUclips and has assisted me greatly in making my electric longboard.
I bet you enjoy watching Caisey Neistat's videos.
Vuze Droid
I'm building one now. Came across your vid. So great to confirm many of my decisions. I'm custom machining many or the parts because I didn't find the ones you have! Can't wait to see more.
is the part 2 coming? (Great project otherwise)
Looks like casey neistat
Great video!...Well done Casey (Neistat) would approve
Make sure your reciever or esc has fail safe or runaway protection. So you do not die if it gets stuck at full throttle.
What are ALL the connectors need to connect to Lipo to the ESC called??
by far the best diy long board vid
2:48 "oben" wie geil, das hab ich auch überall :D
Das Video habt einen guten Style, gefällt mir. Wenn Du so weiter machst, wird dein Kanal richtig groß.
Couple of questions.
1) will this brake properly?
2) are all the parts in the description? Don't really see the ESC in there.
3) how long will it take to put all of this together properly?
4) what would you guys think Is the best thing to use as cover for the parts at the bottom? I was thinking about making some type of carbon fiber mold, but I'm not sure yet.
casey inspired??
think so
+Eoghan Hayde definitely! ;)
yes
haha lol yes
Hi Matt,
thanks for this video, the style is obviously an hommage to the Neistat man, but very well done.
More importantly, the build is clean and very inspiring. I'm recycling loads of 18650s at the moment and my first project will be a longboard in this style. More soon...
Keep on trucking ! (from France)
part 2?
GREAT video you put together Bro!!!!
You are very articulate and show in great depth on how everything works. I HATE how other dudes say they're going to build a board and just show or quickly explain what they did or what they used.
I loved how you even showed your wiring diagram.
I'm looking to build one for my son who is 14 (I will also be building one for myself so we can cruise together), but that ESC (VESC) is a bit intimidating. *COULD YOU PLEASE*....... Do a SLOW Step-by-step tutorial on the complete setup on the VESC??? I know there are videos on it, but you do A MUCH BETTER job at explaining things and I have a feeling that is just your style which will trickle into the VESC video if you were to do one.
THANX Bro!!!!!!
I look forward to more of your content!!!!!!
+rdog1121 i might do one, it will be about 6 weeks until i get the time though :( glad you like it! ;)
please make tutorial about diy battery
Yes
+Ariqkamil Nugroho i will, however i have exams until end of may, so will be june until i ll get around to do it
+matt.duesentrieb ok that sounds good thanks!
If you end up with a part 2 let me know, this was pretty interesting and you have a good way of teaching poeple things!
Sehr sehr geiles video, danke dafür👍... Könntest du nochmal den Link zu der von dir benutzten Batterie schicken?
Vielen Dank und ich freue mich auf part 2😉👌
+Luca Wendker danke ;) die battery packs hab ich aus panasonic ncr18650bd batterien gebaut. hier ein link: www.fasttech.com/product/1674900-authentic-panasonic-ncr18650bd-3-7v-3200mah
+matt.duesentrieb 👍danke und wenn ich die 16000 maH Batterie nehmen würde, würde da eine reichen?
Luca Wendker 16ah kapazität ist mehr als genug, allerdings ist der gezeigte lipo nur 4S, das ist etwas wenig. 8S wäre besser, dh du könntest zwei von denen in serie schalten. allerdings reichen 10 oder 5ah auch schon für den anfang, dh zwei 4S 10ah in serie (8S) würden gehen. oder zwei 6S 5ah in serie (12S) zb - 12S ist aber dann auch das limit, habe ich selber noch nicht ausprobiert, werde ich aber bei meinem nächsten board machen ;)
+matt.duesentrieb sehr geil danke!! 👌Dann setz ich mich da auch mal dran...
+matt.duesentrieb wieviele Batterien hast du verwendet?
the C rating never changes, it has double the ah so if it were a "5c discharge" battery and 3ah (capacity) it can discharge at 15amps (current), is 2 were place in parallel the capacity is double, the c rating stays the same though , so it is 6ah x 5c = 30amps
wow man keep making vids like this and I will for sure subscribe.
The world needs tons more people like you. Great video. Thanks for the upload and info.
wheres part 2?
danz409 still waiting....
i don’t really understand why people are comparing you to casey. the only similarities i see are the workshop and the drawing. but even that’s a stretch imo. your drawings are pretty scientific compared to what occurs in casey’s videos. i really enjoyed the video and thought the style was pretty unique. well done
Das ist das bei Weitem beste Video, das ich je zu E-Brettern gesehen habe. Ich denke, es verschafft einem am Anfang einen recht guten Überblick über die Teile, die man brauchen wird.
Mein Brett ist jetzt auch fertig geworden, ich habe allerdings Luftgummireifen ;)
Grüße
Tobias
how do you make the lithium ion batterry
+360 XBoy's yes pls
ruclips.net/video/b2sBhDxmPmA/видео.html
It is 2 years old xDDDDD
Nice job! Really clean work too. Can't wait to hear the range you get out of that.
I thought it was easy I don't understand half the words in the video
nah stress
Nice job on video and on the board! Two questions come to my mind:first, you weld the wires from side by side. It might be better interlacing ( a wire inside the other ) before welding them; and second, you will probably need two motors, one for each wheel, the way it's done, you'll get all the traction on one wheel only. But man, good job! Waiting for Part 2.
pls part 2
So toll geworden o.o Will jetzt unbedingt auch so eins... aber ich glaube, dass selbst dieses tutorial noch viel zu kompliziert für mich wäre.. Freue mich trotzdem auf part 2. Geil gemacht!
What kind of batteries did you use for this 2 packs which you use to power your longboard?
+Bartek Krzos panasonic ncr18650bd ;)
+matt.duesentrieb Thanks :) . I am building my own longboard but with Arduino for my University project and I have to say this video was kind of inspiration to do it :D
+Bartek Krzos Siema bartek ;) moze Ci sie przydac.. tez szukam i mysle nad ogniwami 18650.. ale jednak zdecyduje sie na typowe ogniwa bo cenowo wychodzą tak samo a jednak nic nie trzeba lutować.. 2x 3s daje razem 6s 22.4V baterie .. LG AKUMULATOR 18650 Li-ion 3200 mAh 3,67V PROMOCJA najlepsze jakie znalazlem - cena / wydajnosc / 10A.
+rocheuro na naszym polskim serwisie aukcyjnym ;) 17
+matt.duesentrieb 10A LG INR18650 MH1 should also be fine. - 10A rated. 3200mAh per cell
Instead of soldering side to side, don't solder the ends, put the two wires in to each other (as if you'd put two toothbrushes hair to hair and push them in) then solder. That gives you an inline joint, and more structural integrity. There's no chance that this solder joint will break apart from fatigue, where as the other, will.
neistat style ...
i love it*
Please make a video on how you made the batteries
Casey Neistat viewer?
+Jake Methner definitely ;)
+matt.duesentrieb I knew it! :P What battery cells are you using? a123 cells?
+Jake Methner i am using ncr18650bd cells, they are kind of pricey but very high quality (3200mah, 10a discharge rate). i initially built the battery packs for my fpv drones where weight is a big issue so i chose these high capacity cells. for a longboard a little cheaper and heavier cells like the ncr18650pf (2700mah) or similar should be totally fine though.
I don't see why people are getting mad at you from copying Casey. I think it looks pretty cool and has a nice touch. Great video man I'm definitely subbing
You must be inspired by Casey Neistat, i see a lot of similarities such as at 0:36 the thing you drag down and just everything in general.
bruh this was 2 years ago and were still waiting for part 2 hope this guy is okay
Caseys style but i dont care
you have to make a tutorial for those battery pack! those are cool! great video!! cant wait for the next one!
i see a lot of you keep on bringing up the fact the recording is similar to casey neistat,SO what! do you moan at adverts/clothing/how people speak/act/sharing stuff on facebook and blah blah blah because its the same,i bet you dont,give the kid a break,good tutorial not hard to follow thanks for the upload
doesnt have a break ??
People like you is awesome
100% casey
+Nikita Zayko roll of paper, -yes, shots -yes......content-yes and no.......casey cant build anything quality, just has no knowlege or patience and fuck up brakes everything,,,,this guy was informative, knows how to build things......casey drives the screw right trough the screen and no informative videos at all.......this guy still a little different but clearly using caseys scheme......,,,,casey can make a good content even if the footage was deleted........being a filmmaker and make a ``how to video`` is different....i liked it.....:))))
Me to
+Borsy zoltan glad you guys like it! being compared to casey neistat is a big compliment and copying his style was exactly my intent of course. he is an amazing filmmaker in that he can tell even the most boring content (ie most of his vlogs) in an extremely entertaining way. on the other hand there are lots of people who make amazing tutorials but it's sometimes really hard to watch to the end. now i am neither a filmmaker nor a super geek, but i try to bring a little bit of both together. getting this feedback from you really motivates me to keep on making videos. thanks! ;)
+matt.duesentrieb when is part 2 coming out really looking forward to it
+matt.duesentrieb well played just put a litlle bit of music ;)
YOU MUST GIVE US PART 2!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I LOVE THIS
Great video Matt, but you could try developing your own style instead of jacking Casey's. This whole thing felt like a rip off of his blog.
like casey build him hisself
*vlog
+Risky Rabbit *vlog = video blog
Dude stfu he can do whatever he wants lol
In yout next model keep more distance between the ground and board. find out a way to make the batteries rechargable.
Nice Casey Neistat inspired video. You even got it down to the boosted - boostedboard
finally, I found a good ASMR channel
Very nice! Your explanation and the video edit are both very well done! I'll use this video to create my own electric longboard in a near future. I'll try to make a video as well :)
+itvraag thanks, glad you like it ;)
+matt.duesentrieb
I’m very curious about your DIY battery pack. I would like to make one myself using old laptop cells. First test each cell then group them. But because I’m a beginner myself in this area I’m not sure how to proceed regarding how many cells, connectors to use and about charging/balancing. Maybe an idea for a future video ;)
Almost 4 years and still no part 2.
That's gotta be a record.
Thanks, amazing video! When is part 2 coming?
casey neistat doesnt make diy videos and I can garentee casey would love the creativity this guy has
Can't wait for part 2!!
The only issue I have with this video is where he said that "high voltage means less current draw". It doesnt, it produces a higher current draw because of ohms law. When you raise the voltage, all you're doing is creating a difference between the numerator and the denominator of the v/r=i calculation - hence more current draw.
Where is part 2?
I wanted to see how the enclosure was made (looks like from plywood - lasercut?)
Your videos are really well put together and edited very smoothly I love it. I love the detail you go into yet the simplicity when it doesn't need to be complicated great job mate can't wait to watch more of your channel
Just wanted to say that this was a great video, and I greatly look forward to part 2
Wow. This is sooooo cool. Where is part II? Keep going, this is great.
2 years and we're still waiting for part 2
nice video man! where is part 2?
what is the speed and distance you are getting?
but wouldn't the motor on one wheel, push the wheel unevenly so it turns the truck therefore disturbs the balance of the board? I mean wouldn't be easier to maintain balance by putting equivalent motors at least on two wheels on same truck?
Great video. You're good at this! When is part two comming?
good video matt
i have a Enertion K1 dual motor kit ongoing project
and also have the Evolve Bamboo AT/ ST version currently riding
This was probably the most informative video I could find keep up the great work I'd love to see part 2
Got the same board homie ! Loaded dervish are super fun to ride
Won't the long board pull of to one direction if it only has one motor on one side? If so, I guess you could compensate with destroying the entire system already set up, you could just get a splinter before connecting to the motor itself... Or am I mistaking? On both accounts...
you sound like you're making ASMR its soothing
you are so talented, can't wait till part 2
i noticed you said you would wire the batteries in series because it would draw less mah but if i were to explain why i wired it in series was to get a higher voltage because the motor have more or less 190 kv wich means 190 rpm per volt, correct me if i am wrong.
hey, nice build. im just finishing up my own build. id be interested to see part 2 if you ever got around to filming it it :)
c;mon man where is part two, I come to your channel every week
Excellent work, the best DIY electric longboard video I have seen to date, eagerly awaiting part two.
genius. now make part two and show us how to make a cool looking controler! :D
hey... may I suggest you to use longer trucks??... this cos I think you could use 2 motors instead of 1... thus longer life for the motor /s.. and others parts
Cool project, there are 2 things that are a bit unclear to me maybe you can clarify this.
1.) What board configuration did you exactly pick? I saw you mentioned the board is called "loaded dervish" but on their website there are quite a few options to pick from. Could you also specify the parts you got such as the wheels and other things? Just to have a complete list of all your components.
2.) The battery pack you built. Do you have some sort of video of that built too, or some info on the parts? I know you said its overkill, how long (time/distance) can u actually drive with it?
+internetz.me glad you liked it. the dervish i have is the predecessor of the dervish sama. i have 180mm paris trucks, which is kind of a default setting for most longboards. the drive pulley i got fits the orangatang kegel wheels. get the best bearings you can afford. the battery is build from panasonic ncr18650bd li-ion cells in 6p 4s configuration (each pack, i use two of them in series to get 8s). i am planning on doing a tutorial on how to solder li-ion packs but it will take a few weeks, i am right now prepping for my big final exam. hope that helps ;)