Great video, exactly the problem I was trying to figure out... Does my fuel pump work or not the only thing I can't figure out is where did you stick that clip because I don't have a clip... I got a wire so does the wire go in the green or in the brown with black stripe I'd appreciate if you knew the answer thank you
What exactly was your issue here? I’m dealing with what I believe has to be a broken wire somewhere. Got a power probe and proved the fuel pump works, replaced the fuel pump relay because I could’nt find how to test this Yamaha one with 16 pins or whatever it is. I know it fires up on starter fluid so I have spark, pump works and I believe the relay works as I just replaced it. Not sure how/where to start
Truth. We have many other videoes in our electrical playlist...Enjoy and share! Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
G'day Shane what if the fuel pump is priming & has plenty of fuel but still won't start? Swapped over another tank & fuel pump fitted of the same exact model yamaha (XT660R) and it fired right up, Then put the original tank back on & it primes but won't start ... Double frustrating because I only removed the fuel pump in the first place to clean the pick up sock and it was running fine before hand.
Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ? Quick answers are often found here. No time to look through videos? Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My RUclips has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!) Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going! Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way! Admin How2Wrench.com
+Shane Conley .. Yeah mate I went through all 521 videos & it looks like you've been a busy bloke Shane but I didn't see any about 'PRIMED fuel pumps' that wont start. bleeding about it big time because like I said there was nothing wrong with the bloody bike but I had to be a wombat & check the strainer & now I'm stuck in Cairns North Queensland while my mates are on a shithot adventure up in Cape York but hey I appreciate the reply fella but looks like you have your hands full with a million other things. Cheers mate.
That sucks friend. When you're really stuck in a position of needing answers, that were I come in and can usually get you scheduled in a day. Here are a couple of the 660 videos that may help get you the skill sets needed to fix since the one one one wasn't an option for you. Videos one and three may help but since I have zero idea of your skill set or some other bike specific questions its hard to tell. ruclips.net/user/conleybuiltsearch?query=fuel+pump If you can switch pumps and it works fine then it surely the tank vent, pump or lines. You have an experienced tech at your disposal if needed... Shane Conley Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going!
I'm having probelms tarting my r6 . Got a brand new battery now it just cranks but wont turn over. I can hear the fuel pump when I turn the key on... where else should I look from here? Relays?
I have the same problem with my Harley V rod Night special. I turn the bike on I get a check engine light but no prime to the fuel pump. I did what you did in this video and the fuel pump turned on. Is my problem an electrical issue? Thanks
As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁 That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
So next determine if the fuel pump generates pressure? Or are you fully confident to move to power that bike provides to the pump. A pump can cycle yet not pump fluid correct?
Bruce Kennedy Yes you are correct. I have had 2 fuel pumps that would turn on, but was too weak to pump the amount of fuel needed. 1 was on a Ford F150 and the other was on a Toyota 4runner. The Ford pump would turn on, but the fuel pressure was 0 at the fuel rail.
I have 2010 cbr 1000 fuel pump wont prime i dont know if its a issue with the pump or the hiss system i am in the uk any advice would be greatful thank you
Hello Andrew. So copy this video's theory by isolating the fuel pump. If you can get it to turn on, then the problem is elsewhere in the fuel system. Don't forget relays, safety switches and connections if you need to start chasing. Many times it's the simple stuff. Hope this helped. Want to give us a “high five”? Click here www.paypal.me/how2wrench Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
I have the same problem. Pump tests good but won’t turn on. Tested the fuel pump relay, kill switch, fuel pump, fuses, and it’s not throwing any codes. Tested voltage coming out of the plug that goes into pump and got 11.7V. Pump won’t prime at all. Any help would be appreciated.
Let me try and see I can catch Shane to answer quick. It’s his travel season. He is preparing for an extended stay in select US cities, Japan, and Africa training students. His member inbox and one on ones get first response and he does try to get back to others. We are just the social media team. Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I don't have easy access to the fuel pump on my boat but I do have easy access to the fuel pump relay. I'm sure the same should work the right, assuming the wiring was good to the pump.
Absolutely Paul. I use this tool at relays and fuses all the time. I have a PowerProbe playlist of videos on the channel here: ruclips.net/video/Hr8E1A1uDDI/видео.html Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page! Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Hello please answer me i have the same problem on my yamaha like this fuel pump is working but it woulnd start im interesed why your yamaha woulnd not start because i had the same problem please answer thanks btw.
Hi friend. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work. Want faster response times? Join link below. Thank you for commenting. Want more benefits? -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
I have a sv650s my stator went replaced it now my bike powers up but can't get fuel.pump to run replaced the replace twice now and fuel pump but still can't the pump to power if I jump my relay plug the pump runs non stop even when the power to bike is completely turned off
If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and scammers so I had to do something for my sanity by screening the over 300 requests a week! I’d love to working with my members and supportors one on one! Contact Link: how2wrench.com/contact/ Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com Have you subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
They have a model that does...amzn.to/3b4R0Uk This is an old video so I don't have access to the bike... We sure love you taking the time to comment. Are you coming to the next live session? There a few ways you could help keep this work going and stay connected with me personally. 1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know! 2. Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench Keep Wrenching, Shane Conley Peoria, AZ USA Follow us! www.How2Wrench.com www.Tools2Wrench.com Facebook: facebook.com/How2Wrench/ Instagram: instagram.com/how2wrench/
Short answer yes...long answer...I'd be typing all day my friend. Reach out to me! Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: ruclips.net/video/vjvmB01ebcs/видео.html Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education! Keep Wrenching, Shane Conley Shirt/Stickers link: how2wrench.com/product-category/specials/ Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench Follow us! Web: www.How2Wrench.com www.Tools2Wrench.com RUclips: ruclips.net/user/ShaneConleyhow2wrench Instagram: instagram.com/how2wrench/ Linkedin: www.linkedin.com/in/shane-conley-how2wrench/ Facebook: facebook.com/MechanicsLearningSharingPage/ Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/ Amazon Tools: www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
I'm the intern studying under Shane. I grabbed Shane quick and he said he knows what to do and it would be worth the techline service as it's not easy to text out and lots to warn you so you don't ruin the job. Place an order and he will get you set up for success! Link below. One of these days I hope to move from the office to the shop! He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below! That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
Yo! Want us to drop our wrenches and help you? We love helping subscribers…even on old videos! Help us grow friend! Here’s how: 1. Subscribe and let us know with a response. We will circle back when we can (usually within a week, sometimes faster, depends on member needs) 2. We answer your questions EVERYDAY for channel members Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin 3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer! 4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
I can’t hear my fuel pump at all on my 97 gsxr 600 and when I connect the fuel pump my fuel pump relay gets to buzzing loud I used a test light on the fuel pump really and it lit up but as soon as I connected the fuel pump it didn’t light up no more and started buzzing I don’t kno what to do at this point
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 19th but is trying to schedule time each day to answer techline orders still. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
On my dirtbike there’s a sub harness that connects to fuel pump. It doesn’t have continuity it seems , and also when I check the fuel pump connection contacts separate from sub harness , they don’t have continuity either! Is it odd for both to have open circuits? I also check the fuel injector connector that goes to fuel pump and it is has continuity to make sure I’m doing it properly
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team. Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service. Here is how to get in! * Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Hey Shane. I have a Yamaha R1 2009. My fuel pump is brand new but no power is being received to it. My ignition coils aren't receiving any power either. My ECU seems to be fine. If you could help me out that would be great. I'll be super grateful man. Love the content 👌
As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁 That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones. There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it! Make it a great day! The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt High fives help too! Give him one here: www.paypal.me/how2wrench
That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 25th but is trying to schedule time each day to answer techline orders still. Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily! He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line. The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one Quick answers are answered daily as a channel member: Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
I offer tech support. Check out my website link below: Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ? Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Glad it helped. We will let Shane know! You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
![OhGeesy x Lefty Gunplay - What It Iz [Official Music Video]](http://i.ytimg.com/vi/L0yzW9t2ixk/mqdefault.jpg)
You can find diagnostic tools here: amzn.to/3X01Rc0 thanks for watching.
Great video, exactly the problem I was trying to figure out... Does my fuel pump work or not the only thing I can't figure out is where did you stick that clip because I don't have a clip... I got a wire so does the wire go in the green or in the brown with black stripe I'd appreciate if you knew the answer thank you
What exactly was your issue here? I’m dealing with what I believe has to be a broken wire somewhere. Got a power probe and proved the fuel pump works, replaced the fuel pump relay because I could’nt find how to test this Yamaha one with 16 pins or whatever it is. I know it fires up on starter fluid so I have spark, pump works and I believe the relay works as I just replaced it. Not sure how/where to start
What. Steps did you take after finding out that the fuel pump worked what did you do after that
If there is a fuel pump relay , all diagnostic can be done there , look for NC or NO contacts , use ammeter, if the pump work it will draw current
Truth. We have many other videoes in our electrical playlist...Enjoy and share!
Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ?
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
G'day Shane what if the fuel pump is priming & has plenty of fuel but still won't start? Swapped over another tank & fuel pump fitted of the same exact model yamaha (XT660R) and it fired right up, Then put the original tank back on & it primes but won't start ... Double frustrating because I only removed the fuel pump in the first place to clean the pick up sock and it was running fine before hand.
Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ? Quick answers are often found here. No time to look through videos?
Still have questions? You’re in luck! I provide tech help and work one on one! I know your question may seem quick but with over 300 requests a week, it’s not possible to answer them all. So, I’ve narrowed down so subscribers and donations to assist beyond the over 660 free videos. My RUclips has grown beyond the ability to answer every question (11 million views! Over 500,000 a month!)
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going!
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way!
Admin How2Wrench.com
+Shane Conley .. Yeah mate I went through all 521 videos & it looks like you've been a busy bloke Shane but I didn't see any about 'PRIMED fuel pumps' that wont start. bleeding about it big time because like I said there was nothing wrong with the bloody bike but I had to be a wombat & check the strainer & now I'm stuck in Cairns North Queensland while my mates are on a shithot adventure up in Cape York but hey I appreciate the reply fella but looks like you have your hands full with a million other things. Cheers mate.
That sucks friend. When you're really stuck in a position of needing answers, that were I come in and can usually get you scheduled in a day. Here are a couple of the 660 videos that may help get you the skill sets needed to fix since the one one one wasn't an option for you. Videos one and three may help but since I have zero idea of your skill set or some other bike specific questions its hard to tell. ruclips.net/user/conleybuiltsearch?query=fuel+pump
If you can switch pumps and it works fine then it surely the tank vent, pump or lines.
You have an experienced tech at your disposal if needed...
Shane Conley
Click here for the membership links and welcome to the community! how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench This is great for those truly quick questions you need answered and your help back will keep me going!
I'm having probelms tarting my r6 . Got a brand new battery now it just cranks but wont turn over. I can hear the fuel pump when I turn the key on... where else should I look from here? Relays?
I have the same problem with my Harley V rod Night special. I turn the bike on I get a check engine light but no prime to the fuel pump. I did what you did in this video and the fuel pump turned on. Is my problem an electrical issue? Thanks
As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
So next determine if the fuel pump generates pressure? Or are you fully confident to move to power that bike provides to the pump. A pump can cycle yet not pump fluid correct?
Bruce Kennedy Yes you are correct. I have had 2 fuel pumps that would turn on, but was too weak to pump the amount of fuel needed. 1 was on a Ford F150 and the other was on a Toyota 4runner. The Ford pump would turn on, but the fuel pressure was 0 at the fuel rail.
I have 2010 cbr 1000 fuel pump wont prime i dont know if its a issue with the pump or the hiss system i am in the uk any advice would be greatful thank you
Hello Andrew. So copy this video's theory by isolating the fuel pump. If you can get it to turn on, then the problem is elsewhere in the fuel system. Don't forget relays, safety switches and connections if you need to start chasing. Many times it's the simple stuff.
Hope this helped. Want to give us a “high five”? Click here www.paypal.me/how2wrench
Need more personalized help? Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks for commenting and adding value to our community! Please subscribe, share and consider a H2W membership to support our free work here!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
I have the same problem. Pump tests good but won’t turn on. Tested the fuel pump relay, kill switch, fuel pump, fuses, and it’s not throwing any codes. Tested voltage coming out of the plug that goes into pump and got 11.7V. Pump won’t prime at all. Any help would be appreciated.
Let me try and see I can catch Shane to answer quick. It’s his travel season. He is preparing for an extended stay in select US cities, Japan, and Africa training students. His member inbox and one on ones get first response and he does try to get back to others. We are just the social media team.
Not a member yet? Here are the details!
Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Note: If you are a new channel member please reply back and we will see your RUclips Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
I don't have easy access to the fuel pump on my boat but I do have easy access to the fuel pump relay. I'm sure the same should work the right, assuming the wiring was good to the pump.
Absolutely Paul. I use this tool at relays and fuses all the time. I have a PowerProbe playlist of videos on the channel here: ruclips.net/video/Hr8E1A1uDDI/видео.html
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench Thanks for commenting and adding value to our community!
Please subscribe, share and consider a H2W membership to support our free work here! We are ramping up for the upcoming new member only site with profiles, raffle drawings, and weekly live Q/A sessions and a for sale page!
Have you subscribed yet to never miss a video? Have you seen the video playlists? Over 600 videos! Check them out here: ruclips.net/user/conleybuiltplaylists
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Thanks so much. This will help me out a lot.
Hello please answer me i have the same problem on my yamaha like this fuel pump is working but it woulnd start im interesed why your yamaha woulnd not start because i had the same problem please answer thanks btw.
Hi friend. I’m the Social Media Manager here. That’s a good question for Shane. He gets hundreds of requests a day and starts each day answering MEMBER or donation support questions first and then if there is time he will try to circle back before heading to the shop for customer work.
Want faster response times? Join link below.
Thank you for commenting. Want more benefits?
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
I have a sv650s my stator went replaced it now my bike powers up but can't get fuel.pump to run replaced the replace twice now and fuel pump but still can't the pump to power if I jump my relay plug the pump runs non stop even when the power to bike is completely turned off
If it was a quick answer I’d try to respond here but I wouldn’t want to lead you wrong assuming certain factors. Reach out to me on my website contact page. We have been overwhelmed with ungrateful people and
scammers so I had to do something for my sanity by screening the over 300
requests a week! I’d love to working with my members and supportors one on one!
Contact Link: how2wrench.com/contact/
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
Have you subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists?
Want to say “thanks” or “keep it up”?
Click here www.paypal.me/how2wrench
Does the power probe show amps..and what is ohms reading across power/ground of fuel pump?
They have a model that does...amzn.to/3b4R0Uk This is an old video so I don't have access to the bike...
We sure love you taking the time to comment. Are you coming to the next live session?
There a few ways you could help keep this work going and stay connected with me personally.
1. The fastest and best thing you could simply do for us is hit that subscribe button…helps us creators more than you know!
2. Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
3. Give us a high 5 here: www.paypal.me/how2wrench
Keep Wrenching,
Shane Conley
Peoria, AZ USA
Follow us!
www.How2Wrench.com
www.Tools2Wrench.com
Facebook:
facebook.com/How2Wrench/
Instagram:
instagram.com/how2wrench/
sir...can fuel pressure regulators be clooged...an f4 i is failing cc test...not a single drop is coming out of return outlet
Short answer yes...long answer...I'd be typing all day my friend. Reach out to me! Thank you for sharing…Let me know if myself or my shop can be of service! Here is a video on how to connect with me: ruclips.net/video/vjvmB01ebcs/видео.html
Below are some links that help support me and my work. Please subscribe and share these videos to make a difference in education!
Keep Wrenching,
Shane Conley
Shirt/Stickers link: how2wrench.com/product-category/specials/
Want to say “thanks” or “keep it up”? Click www.paypal.me/how2wrench
Follow us!
Web:
www.How2Wrench.com
www.Tools2Wrench.com
RUclips:
ruclips.net/user/ShaneConleyhow2wrench
Instagram:
instagram.com/how2wrench/
Linkedin:
www.linkedin.com/in/shane-conley-how2wrench/
Facebook:
facebook.com/MechanicsLearningSharingPage/
Free Mechanic info, tool reviews, and “how to” videos newsletter sign up: how2wrench.com/subscribe-free-newsletter/
Amazon Tools:
www.amazon.com/shop/shaneconleyhow2wrench?ref=ac_inf_hm_vp
Hey i know this one is old, but my hayabusa gen 1 i did this test and not one sound from The fuel pump, whot can it be then? 🙌
I'm the intern studying under Shane. I grabbed Shane quick and he said he knows what to do and it would be worth the techline service as it's not easy to text out and lots to warn you so you don't ruin the job. Place an order and he will get you set up for success! Link below.
One of these days I hope to move from the office to the shop!
He has a few other tricks up his sleeve he plans on making videos on. If you need help sooner choose and option below!
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
Can a fuel pump still turn on like you did and still not be good?
The dealership my bike is at tells me my fuel pump is bad
Yo! Want us to drop our wrenches and help you? We love helping subscribers…even on old videos! Help us grow friend! Here’s how:
1. Subscribe and let us know with a response. We will circle back when we can (usually within a week, sometimes faster, depends on member needs)
2. We answer your questions EVERYDAY for channel members Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
3. Give us a high 5 here: www.paypal.me/how2wrench and I run back to the computer!
4. Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/
I can’t hear my fuel pump at all on my 97 gsxr 600 and when I connect the fuel pump my fuel pump relay gets to buzzing loud I used a test light on the fuel pump really and it lit up but as soon as I connected the fuel pump it didn’t light up no more and started buzzing I don’t kno what to do at this point
From what I'm learning i think your fuel pump shot.
Excellent thanks alot
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please.
Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏
You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 800 video library
-Member-Only FREE tool giveaways
Ways to support or high five How 2 Wrench! Thank you in advance.
YOU MOTIVATE US TO DO MORE!
1. Smash the subscribe button (thank if already a sub!)
2. Have you seen our "RUclips Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
3. High five donation: www.paypal.me/how2wrench
4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
I have the same problem the pump working and relay but no start….. 😒😒😒
That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 19th but is trying to schedule time each day to answer techline orders still.
Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line.
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
On my dirtbike there’s a sub harness that connects to fuel pump. It doesn’t have continuity it seems , and also when I check the fuel pump connection contacts separate from sub harness , they don’t have continuity either! Is it odd for both to have open circuits?
I also check the fuel injector connector that goes to fuel pump and it is has continuity to make sure I’m doing it properly
Let me try and see I can catch Shane to answer quick. He is currently at an extended stay in Japan training students this winter. We are just the social media team.
Due to his limited bandwidth on time and demand for help, we had to choose to forward any requests from members first and it is only $1.99 a month to join. All member tech questions like this get directly forwarded to him every day! Be mindful and honest that this is for "quick questions" that would serve you answers that can clearly be addressed. If it's a diagnosis need you'll need to use the one-on-one service.
Here is how to get in!
* Join here: ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
* Just looking to give us a high 5? Click here: www.paypal.me/how2wrench
* Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
My bike has the same problem, I replaced the pump and it doesnt start
Hey Shane. I have a Yamaha R1 2009. My fuel pump is brand new but no power is being received to it. My ignition coils aren't receiving any power either. My ECU seems to be fine. If you could help me out that would be great. I'll be super grateful man. Love the content 👌
As you can see from the slow response, it takes us forever to screen all these requests. 300-400 a week just in emails and 1000’s of comments! FYI members get answered daily first! Best $1.99 you’ll spend! 😁
That’s a great question for Shane directly! We are just the social media team. Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He just returned from overseas training techs and his inbox is slammed with requests. He is scheduling time each day again to answer techline orders. He does not have the bandwidth to provide free email replies as his schedule is full with shop customers, training schedules, and one on ones.
There's good news though! Shane has 2 solutions for you. One is a deep dive one-on-one with him with video, email and phone support. The other is a "quick fan support" option when it's a quick answer and just helps support the time for him to stop wrenching or training and get you in the direction that a free video had you close. Links to each are below. Hope this message makes sense to you as a decent human being that also works for a living and gets it!
Make it a great day!
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
High fives help too! Give him one here: www.paypal.me/how2wrench
Or you could try starting the bike with the fuel pump hose unplugged, if it spits out fuel, the pump works.
So what was the problem then?
That’s a great question for Shane directly! We are just the social media team. He is overseas training techs until the 25th but is trying to schedule time each day to answer techline orders still.
Shane has a solution for you. As far as the question, Shane does answer questions when he get's back around to non members eventually so hang tight, FYI >>>> he does member ones daily!
He is just returning from an extended stay in Japan training students this winter. You can imagine how full his inbox is. We put orders are to the front of the line.
The one-on-one service. Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Quick answers are answered daily as a channel member: Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Thanks!
Any one no about Suzuki 2008 motorcycles photos or something to see all the fuel lines and vacuum and breather lines it's a street bike
I offer tech support. Check out my website link below:
Have you Subscribed yet to never miss a video? Have you seen the video playlists ruclips.net/user/conleybuiltplaylists ?
Want to say “thanks” or “keep it up”? Click here www.paypal.me/how2wrench
Your answers and help are just around the corner. Save time and money while protecting your investment and yourself by doing it the right way at www.How2Wrench.com
I don't have that probe
You can find it here: amzn.to/3X01Rc0 thanks for watching.
you guys rock!!!
why?
troppo complicato .ci sono metodi come sotto descrito piu semplici
Glad it helped. We will let Shane know!
You rock! Best way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!)
Have you seen our "RUclips Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt
Join this channel to get access to perks:
ruclips.net/channel/UCBhM8DCKnT3qXwTW0eToyCgjoin
-Daily MEMBER FIRST COMMENTS ANSWERED FIRST
-Live Q/A video chats
-Wonder if we have a video on your need? Members can request content links!
-Full Access to the ENTIRE 700 video library
-Member-Only FREE tool giveaways
Just want to say thanks quick to support us for this information and our work saving you money?
Give us a high 5 here: www.paypal.me/how2wrench
Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one