Bro you have NO idea how much I appreciate this video! Right when I was about to go tearing into my steering wheel then head to the wrecking yard in this heat I came across this video and you were 100% on point. $5.00 fuse replacement and it’s all GOOD. Thank you !
My abs,esp and check engine light was coming on intermittent with code p0573, code would tell me that it's the pedal brake switch I replaced but the lights would come back. After a couple videos taking me to high $$ price parts in which I never purchased because I was still dealing with it. I finally came across this video and decided to give it a try and guess what dudes walla all my lights are gone in which by the way every time the lights would come on my shifter would lock and I would have to bypass it every time, I no longer get lights and shifter works every time. Thanks 👍 for the Vid.
Brroooooooo if I could pay you over internet you are a blessing. I was thinking dealership was gonna give me 1200 abs module replacement. Thank yoooouuuu so much💯💯💯
I was going to buy the 30amps fuse but I tried the first trick you showed where you hold the esp off button for 30 seconds and turned the wheel all the way to the left then right and it worked. Thanks 👍🏻
Thanks bro, it work for my 2005 300c, the lights came on after I installed the terminals on the battery the wrong way they I saw a big spark. Could not fix it till I seen your video
Thanks bro, was in process of changing and wheel sensors, luckily on $41 for all four on Amazon. Check this fuse and yep mine was blown also. I checked all mini fuses but never had big fuses bad. You the man
Bro, Thank you for this stellar helpful vid! Saved me from more anxiety and worry with my 300C! Just replaced it and did the 30sec wheel left/wheel right deal and ESP light is OFF & she's rolling on without any problems!
Thank you very much to me, it worked for me, I told myself that they were going to replace the module, the strange thing is that the fuse if it works, I just changed it for another one that was next to 30 amp
Bro mines wouldn’t go past 40 mph and I had the bas esp lights on all I did was change a fuse in the trunk it’s a 15amp blue fuse now my car is zooming trough the streets again hopefully I can help someone out
Hey Frank thank you so much for sharing, I have had my wife’s Chrysler 300 C 2006 parked for about 2 1/2 years obviously paying tag insurance and so forth, and I haven’t been able to drive this car, And besides the above problem my main concern is that according to Diagnostic I performed it revealed that the vehicle loses communication between the Motor and transmission, The symptoms have been that you would be driving the car and it could turn off and you would turn it back on and so forth so in other words it is scary to drive it under these conditions and it’s not reliable, so brother if you or anybody else out here has any information that can help me out please by all means get back to me you don’t have to be today or tomorrow this may be an old video on your behalf, but I’ve been doing some extensive research and I understand that it could be the skim module, or a ECM related issue, but I need to know if someone has experienced problems like this France is eight out of 10 times it could be theirs or it could be that please share if anybody has some information I thank you very much for your time and I appreciate your content, 👋 Robert
Hi 👋🏽 Robert try checking all the ground wires and the wiring on the starter, alternator,cpu and the battery there might be a brake in the lines and because of so much technology on the car a simple ground strap not connected correctly could set your off all kinds of codes and turn off your car . When I mean check them I mean take a day and just check each and ever part I mentioned and don’t rush . It will always be the simplest thing in the hardest spot. Hope it help and good luck 👍🏽
@srt8_charger6.1 I cleaned my throttle and changed a fuse that was under the hood. Can't remember which one but it was a pink box fuse. I think it was a 30
kareem primm pull the radio out check the harness then reinstall sometimes it just needs to be reset. If that doesn’t fix it. U mite need a new head unit
@@Cali000Hustle I got an 06 300 limited n im not really that knowledgeable about how to work on em so I don't wanna make anything worse by not knowing what I'm doing feel me. I bought the fuse right when I made the comment but I haven't put I in yet cuz I'm not tryna break anything
I have the same problem lights in dash come on when crank when I try to drive the car the transmission is like stuck in low gear want change out my speed needle is not moving at all ....but I bump the gear shifter with hand it went back to normal and the light on dash went out ...anyone had that problem it on my 2006 chrysler 300
It’s common … mention that at the dealer and they will sell u a repair kit . It has to do with a small clip inside of the shifter under the beauty cover . I had to remove the cover and use a screwdriver to hit the sensors lol but it’s pretty easy to do . Good luck hope that info helps @kevinhollingsworth
Hey I got the same car and I see your coolant overflow bottle looks exactly like mine too, if you open it is it like a weird brown jelly or solid like stuff I've ask multiple mechanics and dealerships what it is and how it happens but nothing where all clueless so just wondering if you knew?
@@patrickbullick2925 That I’m not sure about. I think it’s possible since it’s a chemical reaction to the metal in the radiator but I’m just guessing at this point.
Chicagorilla the fuse should look like a connected S not like a broken S look at the top it should be see through if not take it to auto parts store and have them test it. Hope that helps bro.
Yes you can by examining the fuses. You might have to drive it at a slow speed and make a small circle in the road to the left and a small circle to the right then drive it around the block. That could fix it if not you could check your connections to make sure the speed sensors are correctly connected. I hope that helps.
Did you try to pull codes ... and has there been any damage to the abs sensor. Also check the abs module. There is a lot of different things it could be. I hope that helps a bit.
My qeustion is did those lights stay on or did they go off and on at times? Mine are going off and on and when there all on the car is in limp mode when the lights are off the car runs and shifts just fine. Thanks for any help have great day
brianj123458 check the abs speedo sensor it mite be going bad as well or could just be really worn, the sensors on these cars are real sensitive just a little moisture or dirt or a little bend can throw it out of wack. The fuse mite just be going out but hasn’t popped yet. I replaced the sensors before I did the fuse just Incase they were going out like in your case. Hope that helps man .
Brian let me know if u were able to fix you problem cuz mine jus started doing that thing morning after a jump start. Its only happens after I've been driving for a while n its gone when I start the car back up the next time
@@jhamarleakey7961 I did figure mine yes. My turned out to be the abs module and it cost me $1100 good luck. I put all kinds of money in the car trying to fix so hope you figure your out
I have the same issue and another code that came up with these is the airbag spring...idk but I will be getting a fuse tomorrow as soon as the parts store opens.....will return with results....❤❤
I forgot what fixed it the first time but it had went away and then I changed my rotors and brakes and it came back on. It turned out to be the magnet/splines that the front wheel sensors read that are on the wheel bearing was broke.
Bro you have NO idea how much I appreciate this video! Right when I was about to go tearing into my steering wheel then head to the wrecking yard in this heat I came across this video and you were 100% on point. $5.00 fuse replacement and it’s all GOOD. Thank you !
What fuse
My abs,esp and check engine light was coming on intermittent with code p0573, code would tell me that it's the pedal brake switch I replaced but the lights would come back. After a couple videos taking me to high $$ price parts in which I never purchased because I was still dealing with it. I finally came across this video and decided to give it a try and guess what dudes walla all my lights are gone in which by the way every time the lights would come on my shifter would lock and I would have to bypass it every time, I no longer get lights and shifter works every time. Thanks 👍 for the Vid.
Damn was getting the same code! Hope this works for me!
Always the smallest things that make a big fix. Ty very helpful
Brroooooooo if I could pay you over internet you are a blessing. I was thinking dealership was gonna give me 1200 abs module replacement. Thank yoooouuuu so much💯💯💯
You can,ask for his email or cashapp..
I was going to buy the 30amps fuse but I tried the first trick you showed where you hold the esp off button for 30 seconds and turned the wheel all the way to the left then right and it worked. Thanks 👍🏻
Is the car on?
Thanks bro, it work for my 2005 300c, the lights came on after I installed the terminals on the battery the wrong way they I saw a big spark. Could not fix it till I seen your video
Thanks bro, was in process of changing and wheel sensors, luckily on $41 for all four on Amazon. Check this fuse and yep mine was blown also. I checked all mini fuses but never had big fuses bad. You the man
Bro, Thank you for this stellar helpful vid! Saved me from more anxiety and worry with my 300C! Just replaced it and did the 30sec wheel left/wheel right deal and ESP light is OFF & she's rolling on without any problems!
Thank you so much had the same problems but didn’t get to the video before buying some parts 🤦🏾♂️ always start with the fuse 🤦🏾♂️
I checked the fuse and sure enough it was blown thanks for the video this will probably take care of the issue
That was it. You saved me a lot of stress. I appreciate you very much for making that video
Thank you very much to me, it worked for me, I told myself that they were going to replace the module, the strange thing is that the fuse if it works, I just changed it for another one that was next to 30 amp
Had the same issue check your fuses had the same fuse pop thanks so much for saving me from buying a abs control module 💯💯💯
Bro mines wouldn’t go past 40 mph and I had the bas esp lights on all I did was change a fuse in the trunk it’s a 15amp blue fuse now my car is zooming trough the streets again hopefully I can help someone out
Was in a 300 and what fuse was it mines doing that now?
@@stack5960 it’s the only blue one in the trunk the transmission fuse look up the diagram and it will show you where the transmission fuse is located
@@323exotic the actual trunk of the 300 ? And thanks bro? Or the hood
@@stack5960 yeah it was the fuse box In the trunk
@@323exotic mines a 2006
Appreciate that man you save me a lot of headache about this one it have your car having a mine of it’s on
You’re a god.
Ty! Easy is that! These other RUclipsr got me zig zaging thru some bullshit
I'm gonna check mine now. Thanks!
Bro. Lifesaver !
Thank you for the video
Hey Frank thank you so much for sharing, I have had my wife’s Chrysler 300 C 2006 parked for about 2 1/2 years obviously paying tag insurance and so forth, and I haven’t been able to drive this car, And besides the above problem my main concern is that according to Diagnostic I performed it revealed that the vehicle loses communication between the Motor and transmission, The symptoms have been that you would be driving the car and it could turn off and you would turn it back on and so forth so in other words it is scary to drive it under these conditions and it’s not reliable, so brother if you or anybody else out here has any information that can help me out please by all means get back to me you don’t have to be today or tomorrow this may be an old video on your behalf, but I’ve been doing some extensive research and I understand that it could be the skim module, or a ECM related issue, but I need to know if someone has experienced problems like this France is eight out of 10 times it could be theirs or it could be that please share if anybody has some information I thank you very much for your time and I appreciate your content, 👋 Robert
Hi 👋🏽 Robert try checking all the ground wires and the wiring on the starter, alternator,cpu and the battery there might be a brake in the lines and because of so much technology on the car a simple ground strap not connected correctly could set your off all kinds of codes and turn off your car . When I mean check them I mean take a day and just check each and ever part I mentioned and don’t rush . It will always be the simplest thing in the hardest spot. Hope it help and good luck 👍🏽
Thank u for sharing
Don’t you hate that. Fix all of the hard to reach and expensive parts and it turns out to be a F’n fuse! 😂😂😂
Por que ami carro le parparean todas Las luces de enfrente de atras del tablero
Good job ty
Thank you this really help me out
WILL THIS WORK FOR 2009 CHRYSTLER ASPEN
My DODGE NITRO HAS THE SAME LIGHTS YOU SAY BRO . WICH FUSE I NEED .TO SEE PLEASE
Would this cause the trac light to come on too? I have abs,esp bas and trac light on
So look my 06 300 hemi rwd not going over 30 changed the trans & trans filter mean to tell me it could be a fuse ????
Did you have any driveability/brake issues when you had those lights on?
What did that fuse go to? Thanks for your time.
This work in my 2006 magnum r/t hemi
Thanks bro you saved me a lot of time and money
Dhamn!! Thanks broooo
Thanks man t
So I take that fuse out and I can do a brake stand or donuts?
I got those same lights but my car isn't going over 40 mph. Did any of you had this problem?
Did you figure out your issue yet? I'm having the same issue
@@freddiemack26I’ve got the same issue did you ever figure it out?
@srt8_charger6.1 I cleaned my throttle and changed a fuse that was under the hood. Can't remember which one but it was a pink box fuse. I think it was a 30
Bro would it start then turn off?
But what does that fuse go to
Hey bro would you know any thing about the radio screen going in and out I have one just trying to find out what’s going on
kareem primm pull the radio out check the harness then reinstall sometimes it just needs to be reset. If that doesn’t fix it. U mite need a new head unit
Thank you
Can I just pull I straight out with my fingers or do I have to do it another way?
Pull it out with your fingers it should pop right out.
@@Cali000Hustle I got an 06 300 limited n im not really that knowledgeable about how to work on em so I don't wanna make anything worse by not knowing what I'm doing feel me. I bought the fuse right when I made the comment but I haven't put I in yet cuz I'm not tryna break anything
Was your airbag light on as well?
Day lights not working in the rear.. my blinkers work, my break lights glow when pressed. I’m thinking it’s a fuse or relay switch??
Mine doesn’t have rear running day lights … are u sure it’s not your hazards your thinking of of your reverse lights
Did you scan the codes? If so besides the lights what codes did you get?
Dustin Pugh there was no engine light to check it was only braking issues
@@Cali000Hustle thanks for the reply!
Will this work for my Chrysler 300 2009? It’s not the c just regular 300
I have the same problem lights in dash come on when crank when I try to drive the car the transmission is like stuck in low gear want change out my speed needle is not moving at all ....but I bump the gear shifter with hand it went back to normal and the light on dash went out ...anyone had that problem it on my 2006 chrysler 300
It’s common … mention that at the dealer and they will sell u a repair kit . It has to do with a small clip inside of the shifter under the beauty cover . I had to remove the cover and use a screwdriver to hit the sensors lol but it’s pretty easy to do . Good luck hope that info helps @kevinhollingsworth
Hi.i ll try with my 2008 car .maybe i ll be lucky :)))
Hey I got the same car and I see your coolant overflow bottle looks exactly like mine too, if you open it is it like a weird brown jelly or solid like stuff I've ask multiple mechanics and dealerships what it is and how it happens but nothing where all clueless so just wondering if you knew?
That happens when different types of coolant are mixed together. Not all are compatible with each other even when they say universal.
@@reneramirez8904 would it cause rusting??
@@patrickbullick2925 That I’m not sure about. I think it’s possible since it’s a chemical reaction to the metal in the radiator but I’m just guessing at this point.
Would it be the same for a 3.5 charger?
Chicagorilla mite have a different location for the fuse box but it should show u on the car manual. Bet of luck on your repair
How could u tell of the dude was blown??
Chicagorilla the fuse should look like a connected S not like a broken S look at the top it should be see through if not take it to auto parts store and have them test it. Hope that helps bro.
@@Cali000Hustle thanks bro. I switched it with 1 that I knew work but the light is still on
Reset the computer
can you see that they have popped? i have just changed speed sensors but cose reader is still saying they are faulty 🤷♂️??
Yes you can by examining the fuses. You might have to drive it at a slow speed and make a small circle in the road to the left and a small circle to the right then drive it around the block. That could fix it if not you could check your connections to make sure the speed sensors are correctly connected.
I hope that helps.
@@Cali000Hustle thank you kind sir 👍
May i ask what model your radio is. I want the navigation and so on. I have a 2008 300c
I actually have the stock Navi radio. Hit me up if ya wanna purchase it.
I need help, my car c300 2008 has ABS and ESP not working, also the lump esp and abs Do not appear when the car is switched on
Did you try to pull codes ... and has there been any damage to the abs sensor. Also check the abs module. There is a lot of different things it could be. I hope that helps a bit.
Yeah that'll work when you blow a fuse lol usally its a wheel bearing
I have the same lights on but, when breaking pedal gets hard and breaks scrape has anyone had this problem? Can it be fix with that fuse?
Check your fluid and make sure there is nothing in between the pads and disk . Hope that helps
My qeustion is did those lights stay on or did they go off and on at times? Mine are going off and on and when there all on the car is in limp mode when the lights are off the car runs and shifts just fine. Thanks for any help have great day
brianj123458 check the abs speedo sensor it mite be going bad as well or could just be really worn, the sensors on these cars are real sensitive just a little moisture or dirt or a little bend can throw it out of wack. The fuse mite just be going out but hasn’t popped yet. I replaced the sensors before I did the fuse just Incase they were going out like in your case. Hope that helps man .
Brian let me know if u were able to fix you problem cuz mine jus started doing that thing morning after a jump start. Its only happens after I've been driving for a while n its gone when I start the car back up the next time
@@Cali000Hustle I that the censor u showed in the back in the middle of the video? Is it hard to change without a mechanic?
@@jhamarleakey7961 I did figure mine yes. My turned out to be the abs module and it cost me $1100 good luck. I put all kinds of money in the car trying to fix so hope you figure your out
@@brianj123458 how much was the part itself? N damn did u try the fuse first?
Did you scan the codes? If so besides the lights what codes did you get?
I have the same issue and another code that came up with these is the airbag spring...idk but I will be getting a fuse tomorrow as soon as the parts store opens.....will return with results....❤❤
I forgot what fixed it the first time but it had went away and then I changed my rotors and brakes and it came back on. It turned out to be the magnet/splines that the front wheel sensors read that are on the wheel bearing was broke.
Yes thanks