Thank you for share this,do you know if it is avalaible to Oculus Rift cv1? Can´t not understand why people don´t use shoes with Fanatec Pedals,I mean you can hurt your feet man.Racing shoes cheapest you can buy ;). Another thing is why Prosimu,don´t you know about NJmotion,they are cheapest and servo motor ios stronger than actuators and don´t make noise at all.I was testing it and no creepy sounds at all like your cockpit bro,I am saying this if you got a wife or neighbors...
pretty sure you can get lenses for the rift too, and yep they make quite some noise .... but i'm far away from the wife (she is mostly in the kitchen) NJ motion ... well its only the seat that is moving not the whole car meaning steering wheel and pedals... if you just want the seat to move go for the NEXT LEVEL RACING PLATFORM. i'm sure there are others out there and i'm not saying Prosimu is the best but I love my 3DOF and i sometimes sit in my other standing still rig and boy what a difference.
Great video. Thanks for the installation guide. I bought lenses 2 days ago and waiting for delivery. I mainly use my vive for Euro and American truck simulators I'm hoping I'll get rid of the blur caused by the lines on the original lenses
Waaw years later and still people watching this. I pre-ordered the pimax crystal ....now using the vive pro2. But to be honest my former setup with the vive and lenses was better.
honestly i really think that is because people dont know how to use them. Apparently there where the same problem with the HP reverbe G2.. but then MRTV asked about 15 people to send there so called bad HMD"s to him and he found NOTHING wrong with them.....LOL
Woah. That Stanley knife was a brave move. I've swapped out lenses with a butter knife. You can imagine the difference between the pointy end of a Stanley, vs the flatter/wider end of a butter knife.
@@hernandezjose20 I can definitely believe it. While watching people do it in these videos, I've been thinking that they have just been lucky. Thanks again for giving me a safer method to use! Did you do anything specific to mitigate the dust risk?
Oh ... My.... God... This is simply incredible. I just can't beleave how much the replacement of the original lenses improved the display's quality of my Vive. I would like to thank you for the tip and the clarity of your tutorial. Keep up the good work. I have subscribed to your channel and i'm for now a serious follower.. ;) Best regards from France...
Yes! I did the upgrade and WOW! for me it was perfect. NOW. I just got my Valve Index headset and guess what! it has the same problem the HTC had before the update. Maybe the Gear lens will do the same for the Index headset. Anyone want to try?
Donny, I am not sure if they will fit. they look real close but I am not brave enough to take apart the Valve Index. I am still using my Vive/Gear Pro headset. I do like the Index controllers they fit me better than the Vive and the Rift. I do think that I can tell that the 144 refresh is noticeable but the god shadow's are distracting. I also like the speakers and fit of the Index better than the Vive Pro. Maybe its impossible to get the BEST of the BEST. @Donny Granger
well at least i'm glad that someone believes me when i said the vive pro with lenses is the best out there even with newer devices coming out... not sure if the valve has the same lens kit....wil look up on the web if there is anything out there, that is if you are willing to sacrifice the valve's warranty... but if you do it carefully they wouldn't even notice when you put the old lenses back in there...
1st. Never use a cutter or sort of sharp knifes to dismount the old lenses. Use a butter knife or a screwdriver. 2nd You did not clean anything inside the housing with the LEDs that's why You got dust on the screen You can see it at the left side 17:16 3th. You forgot to mention the danger of dust and dirt coming into the housing. Otherwise You have to be sure to test it first at the white Steam VR Area before going into games. And You probably have to repeat this part several times before getting a clean screen. 4th After the mod the distortion may have changed which can be corrected with a lighthouse config update. AND THE MOST IMPORTANT THING is to mention the warranty loss after this modification. I think You should mention that to everyone here. Because they blame You later for this which was not mentioned before. But what I can tell it blows everyone off. I did it a half Year ago and it's amazing.
hmmm First this is not a official video ! this is me sharing a experience... what people do with their vive or anything else for that matter is their problem i'm not going to put disclaimers on my videos ...duh if they are too dumb to do it they shouldn't.... ps @ 6.55 i'm cleaning the lenses, and of camera i cleaned them with a special solution they use with camera lenses... and i cleaned the screens as well...yep there was some specs in the lens but one tap in the HDM and it was gone.....now everything is white clean as a whistle. and there is no distortion what so ever....if the lines run straight there is no need for any adjustment.. so sorry to disappoint you . I'm just having FUN ! and still am....
Hey there. There is no official video. It's a mod by the VR Community. You're right. Everyone is responsible for their own doing with vive or anything but at least You showed some kind of tutorial even if not mentioned. Its an open video so people could be interessted in already. As You describe in Channelinfo "Hope to keep You informed in everything" Sorry didn't see the cleaning but I updated my comment. How ever the distortion is relative and destracts different peopIe with different IPD messures. Just because You can't see it does not mean others also can't. I don't judge Your doing I just wanted to tell You that this mod is not for everyone and You should show and tell more about this mod or have a disclaimer. Keep VR alive! Hank
@@VR-CHECK personally i think VR is very underestimated.. people try them out but VR is something that grows on you... your brain must adapt once your eyes and brain get it then you will have MEGA fun... unfortunately everyone just tries it once and a while and that's not enough to get used to it.... But thanks for the comment.
HANK's VR he is just giving advice, if you are the type of person to do something like this to your expensive Vive do you really think people will watch this video only and not do anymore research. If there are people like that then thats there problem and maybe they should not try to mess with things they clearly dont or cant see the risks. I really enjoyed the video and thank you for taking the time to make it. cheers from the UK. Channel VR
Id does indeed reduce the FOV but with the VIVE you can compensate that with the hardware. Shrinking you can compensate with the software. However still 20% of the people dont see a difference. But lets agree anything is better then the awful GODrays.
Thanks , sure you will be happy with them ;-) Just make sure you always take time to center your HMD so your eyes are smack in the middle so everything is in super focus !
@@victord3093 a different person said its so much bettern the valve index. Im so happy i stuck with my vive pro. This kind of upgrade scares me but i will now order some lenses and upgrade it.
Prima video. Ik twijfel tussen de Vive pro en de Index. Ik heb nu een rift s. Heb jij ervaring met de index. Ik speel voornamelijk Skyrim, Eleven table tennis, Pavlov en Elite. Nice video! Subbed! I can't choose between the Index or the Vibe pro. I own a rift s which is great. I play mainly Skyrim, Pavlov, Eleven Table Tennis and elite dangerous. Do you have any experience with both? Kind regards.
sorry enkel ervaring met vive en vive pro....heb wel al tot 10 soorten om mijn hoofd gezet maar niet lang genoeg om een oordeel te kunnen vellen. Laat je niet vangen door HOGE resolutie want dat kan je GPU toch niet aan. Ben nog altijd superblij met de ViVe pro met lens upgrade (boet een klein beetje FOV in maar valt echt mee)
give me your address .... i will mail it to you... hope it fits in your mailbox...LOL Thanks mate...gonna do a rig build tutorial video...the rig it self wil only cost about 150 euro....so good for everyone..
Dude.. Just found your channel by chance, this reminded me to fit my lens I bought ages ago to my pro. Like your humour and mistakes, which we all make. Keep it up.... Greetings from Brexit fucked UK.
Could you do a tutorial please how to apply the distortion profile please . Because right now with the lense mod I feel dizzi and the world scale is off . Things are a bit too small
Channel VR Hello so I looked at a few stores online and they have measurements which i know nothing about... so i should get my vision checked at an optic first and then buy these measurement made lenses or are they like a one-size-fits-all? Thank you great vids!
You have 2 versions... Normal non fresnal lenses for people that don't wear prescription glasses. And second the prescription version where you have to give the correction to the vendor so they can adapt the lenses. These you should only buy if you are wearing glasses and you want to take them of for VR.
@@channelvr1293 Thats even better.. :-) Just make sure you don't trap the thing in the headset while you teleport... We all know what happened to Jeff Goldblum
Hi and really appreciate the video ! I know this is a very old post but what I was a bit worried about in performing this upgrade was that with the original vive and one of the main reasons I bought it over any other headset at the time was because of its better field of view especially as you could make the faceplate thinner allowing even more of an increase as you could get your eyes closer to the lenses so wondering as the gear lenses seem smaller and because of the 3D plastic insert making the screen distance even further - would you have to sacrifice fov then ? Cheers
hi there, yep there is always a sacrifice in FOV but i compensated that with a very thin faceplate and i have to say its more then worth it . You can use these lenses with the vive and the pro version. Works perfect for me. ;-) I got the Pro 2 now and have to say these fresnel lenses again are awefull.
Channel VR Wasn’t expecting the reply - thanks again . So just to reconfirm I have my vive with the reduced faceplate thickness mod and the fov increase as a result so if I use these new lenses with the 3D printed plastic inserts there will be no decrease in fov right ? Appreciate this as it’ll cost over £20 to buy these . Just though with the increased height of the inserts you wouldn’t have been able to get your eyes as close to the screen as you could of with the original lenses ? Thanks again
Further to my post - Channel VR Wasn’t expecting the reply - thanks again . So just to reconfirm I have my vive with the reduced faceplate thickness mod and the fov increase as a result so if I use these new lenses with the 3D printed plastic inserts there will be no decrease in fov right ? Appreciate this as it’ll cost over £20 to buy these . Just though with the increased height of the inserts you wouldn’t have been able to get your eyes as close to the screen as you could of with the original lenses ? Thanks again
@@paulnicolas172 well as long as you dont wear glasses the FOV will only diminish with a few degrees but that is more then worth it because now you can look everywhere without seing those damn rings.
Ok, just installed them and tested... Sharp area definitely much higher, so it does not bother anymore... BUT: contrary to what it is advertised you definitely lose some of the FOV. But for me the trade of is ok. I'd rather have the clearer image.
i have new lanses on both the Vive and the Pro now and i have to say ....you have a much better result with the Vive Pro... with the vive it looks better but it also seems to magnify the image so now you can seen this mess grid in front of your eyes more if you focus on it... with the Pro however the results are STUNNING !
Marcel, you are right. The FOV is dramatically affected I bought the new lens mainly because this review, however I was not taking account the FOV reduction. The quality is amazing, but the FOV is not good. Channel, would be very informative if you do a new video talking about FOV difference, I really didn't find any one talking about that, however it's an important aspect.
i think i can make the FOV better by printing other rings . like i said in my video they protrude outwards if they would go inwards it should solve the FOV. but a easy fix is a thinner headband. For me FOV is not a problem because i use the HTC mainly for simracing and well if you wear a helmet like in real life this is just about the FOV you get from this.
How is the glare effect with these lenses? From what I can see they don't seem to have an antireflective coating, and the only lenses I can see that come with an antireflective coating - which is a must for any type of lens (I used to sell spectacles haha) are only prescription lenses that you put on top of the current lenses... Do you know if there is a reason behind this? I can't believe they didn't even change the lenses for such expensive tech as the HTC Vive pro. Anyway, very informative and helpful video! :) I will look into replacing my Pro lenses but don't know if it's worth it without proper lens protection.
nope no antireflective coating but dont really think you need that ...i wear lenses and glasses... and this upgrade was like having prescription glasses after having seen bad for life...LOL i'm not going back.... hey even if you dont agree the only thing you have lost will be 35 $ you can always put the old lenses back in .....no problem. There is no reflection on the lens from my face side if everything is dark...
Did not really see what upside down means -> would have been helpful to have video in detail on that part... and what happens with the FOV? The diameter is much smaller than the one of the fresno lenses
Yep that's a yes however you will lose a bit of fov...that is if you're Vive has the new headstrap . Because the new headstrap limits the back to front movement of your lenses. But yeah works like a charm... done it in my first Vive .
I loved your video and it convinced me to order the Vive Pro, which i just did. Ik had pas in de gaten dat je Nederlands sprak toen je "In je mand" riep. Ook gesubbed, goed kanaal en top videos!
The Vive Pro is great but the lenses that they come with are horrible. The peripheral vision is just too blurry. I constantly have to turn my head directly at something to read it.
yes and no.... because they are closer to your eyes then the fresnel ones what should have been a reduced FOV is now really negligible . So maybe by 2 % but the clarity makes up everything.
@@channelvr1293 last question. Did you have to update/change software like some posters are saying? Or did they work without that? I think they called it "Barrel effect" or something
Also don't you have to get into the HTC software and modify some settings? I actually got the gear vr lenses myself about 4 months ago and installed them but there is barrel distortion and there is a way to fix it.
I honestly don't have any distortion.... i really think it has to do something with the lenses or lens holders...because it seems a lot of people doing the upgrade seem to have problems.... i however have a perfect field of view....
@@channelvr1293 It has nothing to do with the FOV. The new lenses are heavily curved. The old lenses were not. So the picture, which is projected through the new lenses, is also (more) curved now. This is what they call the "barrel distortion" and the Vive needs to be adjusted. It is a bit difficult to describe. Maybe you don't notice it, because it has little impact in the game(s) you play primarily. It should be very noticable in the SteamVR lobby though, the room you are in by default if you just start up SteamVR. The new lenses (from Samsung GearVR RM323) and adapters (from Thingiverse) are actually all the same, so there are no "good" or "bad" adapters (if printed correctly). I did the GearVR mod too and noticed the distortion effect instantly in the SteamVR lobby and had to apply the distortion fix from Reddit.
@@nuclearping i have seen all the video's of sweviver.... however i have done the same tests as he has... i'm also standing in a Cubic room made out of straight lines like standing inside a rubik's cube... so if you are standing inside the cube and all the lines are straight....in all directions.... perfectly aligned... i'm happy.... i have no barrel view.... so nope i'm not changing anything in the software just because others out there have done so... I'm not a person that if everyone else jumps in to the water that i will jump too. I have come this far in life by doing my own thing and not let me be influenced by others . ( i have actually sold red wine to people telling them it is white wine and up till now nobody has tasted the difference ... says a lot about people . I poor the wine into dark Glases and chill the red to 12C° ) but still i think you understand.... i'm almost 50 and have been there and done that ... Oh and one of my friends is a well know eye surgeon and he tells me the lenses ar perfect . You know what is the most important in VR..... your IPD this can make or break your VR experience better then measuring it yourself people should go to a optician for correct measurement. IPD is horizontal but vertical measurement is just as important that's why my video's from inside the HMD suck.... because its important to but the camera (or your eye for that matter) smack in the middle of your lens to get the best results. so thanks for the info ...but in my case not necessary....
@@nuclearping idf you see distortion is down to where your eyes sit in proximity to the lens. fresnel lenses dont have this problem. you could hold the headset in your had t arms length away and what you see through the lens is undistorted. vs these lenses you have to have your eyes be in the right plce. for some people that may be where their eyes naturally sit.
Thank you SO MUCH for solving my problem with the replacement Gear lenses: I had, indeed, put them in "upside down" because that seemed to be the natural way. The result was an intense barrel effect. When you said they should be placed to face closer to the eyes, rather than farther away, that made me realize I'd done the same thing that you first did. I think a lot of people who later complain that the new lenses don't work for them may have done this! My OG Vive is working great now!
Hi, nope didn't change anything on the pc... Just the lenses. Didn't even have to install correction software like some people suggest... Works just fine.
Lol you threw those lenses across the room you could have sold them they are 150usd to replace so hopefully if they are not too scratched you might be able to get a few bucks back on them on ebay
@@channelvr1293 lol we all make mistakes bud. Not sure how much of a second hand market there is but i know when mine got scratched due to my glasses rubbing against them i found out how much they were to replace i looked around for second hand ones but couldnt find any. Fortunately i came across the gear vr mod too and havent looked back. I also have a hp reverb but my go to is my vive even though the reverb has better resolution. Its just got a great build quality and although heavier doesnt hurt my face like the cheap build quality of the reverb. I'm sure it feels cheap due to them trying to reduce weight but its really bad and uncomfortable.
Hi well eeuuh NO ... there is absolutely no distortion that i can see ....lines are straight in horizon and vertical so nope not really a issue ....you just loze a bit of FOV but i counteracted that with buying a face cushion that is half as thick as the original one to your face is closer to the lenses. that widens the FOV.
hmm.. what config setting did you use after swapping the lense? i tried pro v.14 config but distortion is still horrible. i am using gear vr 2016 lense.
Yes a lot of people have talked about distortion...I however haven't got any distortion what so ever. I'm thinking maybe there are different types of lenses out there and also the quality and position of the lens holder my have something to do with it.
@@GoodGuy374 sorry for the late response ..link here : www.etsy.com/nl/listing/618525953/complete-gear-vr-lens-and-adapter-mod?ref=shop_home_active_8&crt=1
Thing about this Gear VR lenses mod it seems like I see alot of black to the right and left compared to the vive lenses. Kind of dont feel as if I am in VR anymore . I dont remember it feeling like I was looking thru 2 small holes while playing. Maybe I didn't notice it before. When I focus the headset outward it gets way worse. I did the barrel distortion fix but I dont think that has anything to do with what I am talking about. Anyone else experience that? I understand the lenses are alot smaller but didn't expect to see so much black on the outsides of the image. If I move the IPD way out it helps because it moves the lenses outward but it just makes it blurry because my eyes arent that far apart.
Greetings, I've just got my vive pro(loving it) and yeah I hate the Fresnel rings, could you let me know where you got the new lenses from? Many thanks for sharing your experiences :)
yep you are gonna have fun with the VIVE PRO...but once you will get those lenses in you will be amazed.... here's the link...: www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod
@@channelvr1293 So i just received my new lenses and man what a difference they make, No more rings! Lens swap out is super easy and they popped in nice, it's like a different kit now :)
@@niavellir7408 I think that also depends on your eyes, with my old eyes i see very little SDE(Samsung odyssey(not plus)) yet my M8 who is ten yrs younger than me seems to notice it more.
Would be fun to go ... not so far from Bruges, Belgium but the only thing i dont have is time....got 2 companies and they take up 120% of my time the rest is for my rig and youtube LOL.
Nice vid! But it looks like you lose some fov with the new lenses do to the blue attachment things? And one other question. You don't get lower back pain when driving in your rig? I can see that you extend your legs in a quite straight position. If you do, or will start to get lower back pain, try to move your pedals a bit closer to you, so you can have your legs a little more bent.
You are very right my friend....i have wanted to do that for a while now....but i have BIG friends and they all wanne have a go cant put my chair on rails...because of the seatbelt.. i do indeed get back pain when i'm in there a long time.
Channel VR You should make it fit your needs mainly.. ;) your back problems can actually start to affect you even in other situations later on otherwise. How about an adjustment, making it possible to change position of the pedals for when your friends come over?
Hi there, I was recently planning buy a VR for me. I do lots of research, most of people recommended that get HTC Vive Pro with Gear VR Lens Mod Upgrade + Valve controller. So I have question about this Gear VR Lens Mod Upgrade. I saw a post on reddit(1. www.reddit.com/r/Vive/comments/86uwsf/gearvr_to_vive_lens_adapters/?st=jg0a1omp&sh=5cbb0850 2. www.reddit.com/r/Vive/comments/86uwsf/gearvr_to_vive_lens_adapters/dwdigxa/) They mention about the 'pre-lens distortion algorithm'. It's like a file change by PC. However, I didn't see your video have cover this process. So, could you tell me did you miss that process or just because this lens gear you placed on HMD which doesn't need the process of 'pre-lens distortion algorithm'? Sorry for my poor English, hope you could understand what I am trying to reach you.
Just sub'd. Looking forward to your Realflight 8 review. I've been simming on Realflight since g3, and I owe all my realworld flying skill to that simulator. I never do anything for real that I haven't practiced on the sim first. Realflight has had it's ups and downs... though it's always been the most realistic RC sim available. With g8 they've hit a new high water mark in heli sound & physics... and VR is the cherry on top. I hope you enjoy your new RC sim and I hope to catch you on Multiplayer!
well it all depends on what you already have...the fanatec stuff alone can be expensive but just the moving rig is about 2000 euro. You can make it as expensive as you like..Starting with a PC...from 1000 to 3000 euro...LOL
There are two versions of the VR lens upgrades on etsy.com. I bought these in carbon black: www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod I think Channel VR bought the same also since his lens adapter color is blue. The link he posted is for the other version, which only comes in black.
I did about 2 hours off Assetto Corsa they look really clear, but the FOV is really bad. You can even tell just by look at the lenses side by side the originals are heaps bigger diameter.
true but....you can actually buy prescription glasses so you get the best of both worlds no irritating glasses to wear inside the HMD and better vision.
i have never read a manual in my life .LOL but in this case there wasn't a manual ...just the lenses in a envelope ... i could have left this out of the video and nobody would have known a thing...but that's me...it is what it is....
You tube and vids like this are here to help people and are instructions..If i'm honest i'd have put them in that way also... seems natural. Intelligent people never read instructions they make them :-)
well apparently you have the same system and have tried it too... yes ? NOPE i have put this vive on 8 different peoples heads and ALL of them confirm the difference is amazing and none of them see a screen door effect . So sorry but you are wrong . I got people sending me thanks messages saying there vive is so much better.... are they all wrong ???
Thank you for share this,do you know if it is avalaible to Oculus Rift cv1?
Can´t not understand why people don´t use shoes with Fanatec Pedals,I mean you can hurt your feet man.Racing shoes cheapest you can buy ;).
Another thing is why Prosimu,don´t you know about NJmotion,they are cheapest and servo motor ios stronger than actuators and don´t make noise at all.I was testing it and no creepy sounds at all like your cockpit bro,I am saying this if you got a wife or neighbors...
pretty sure you can get lenses for the rift too, and yep they make quite some noise .... but i'm far away from the wife (she is mostly in the kitchen)
NJ motion ... well its only the seat that is moving not the whole car meaning steering wheel and pedals... if you just want the seat to move go for the NEXT LEVEL RACING PLATFORM.
i'm sure there are others out there and i'm not saying Prosimu is the best but I love my 3DOF and i sometimes sit in my other standing still rig and boy what a difference.
Great video. Thanks for the installation guide. I bought lenses 2 days ago and waiting for delivery. I mainly use my vive for Euro and American truck simulators I'm hoping I'll get rid of the blur caused by the lines on the original lenses
Waaw years later and still people watching this. I pre-ordered the pimax crystal ....now using the vive pro2. But to be honest my former setup with the vive and lenses was better.
Well, I ordered some - hope the issues I'm worried about aren't a big deal. Distortion, scale issues, fov.
honestly i really think that is because people dont know how to use them. Apparently there where the same problem with the HP reverbe G2.. but then MRTV asked about 15 people to send there so called bad HMD"s to him and he found NOTHING wrong with them.....LOL
Woah. That Stanley knife was a brave move. I've swapped out lenses with a butter knife. You can imagine the difference between the pointy end of a Stanley, vs the flatter/wider end of a butter knife.
Just to add some updated info, I used my suction cup from my fixit kit and the lenses popped off effortlessly
A very good idea.
Thank you for that! I plan on buying this upgrade in the next week or so and was dreading the thought of taking a blade near my lenses. lol
naktaal I actually did some damage to my lense with a blade before I found that a suction cup does just as good a job
@@hernandezjose20 I can definitely believe it. While watching people do it in these videos, I've been thinking that they have just been lucky. Thanks again for giving me a safer method to use! Did you do anything specific to mitigate the dust risk?
I've done the mod, my friends have done the mod, no problems,no headaches, no sickness, no distortion, no barrel, no utility correction. Nuff said
Oh ... My.... God... This is simply incredible. I just can't beleave how much the replacement of the original lenses improved the display's quality of my Vive. I would like to thank you for the tip and the clarity of your tutorial. Keep up the good work. I have subscribed to your channel and i'm for now a serious follower.. ;) Best regards from France...
thanks just sharing my views....
congratulations, great job :)
Yes! I did the upgrade and WOW! for me it was perfect. NOW. I just got my Valve Index headset and guess what! it has the same problem the HTC had before the update. Maybe the Gear lens will do the same for the Index headset. Anyone want to try?
Donny, I am not sure if they will fit. they look real close but I am not brave enough to take apart the Valve Index. I am still using my Vive/Gear Pro headset. I do like the Index controllers they fit me better than the Vive and the Rift. I do think that I can tell that the 144 refresh is noticeable but the god shadow's are distracting. I also like the speakers and fit of the Index better than the Vive Pro. Maybe its impossible to get the BEST of the BEST.
@Donny Granger
well at least i'm glad that someone believes me when i said the vive pro with lenses is the best out there even with newer devices coming out... not sure if the valve has the same lens kit....wil look up on the web if there is anything out there, that is if you are willing to sacrifice the valve's warranty... but if you do it carefully they wouldn't even notice when you put the old lenses back in there...
i manged to buy a sealed samsung gearvr (2018) for $20 locally. I ordered the 3D printed adapter for $14! MIght be testing this out very soon!
Wow wat een aparatuur.
Onbegrijpelijk dat Vive deze lenzen niet standaard leverd, maar VR wordt steeds beter. Veel plezier met deze lenzen.
Thanks, tja des tijds gewoon begonnen met een stuur aan mijn bureau....beetje bij beetje opgebouwd...maak daar ooit ook eens een video van .. ;-)
Also thanks for the video! I've now ordered the new lenses and looking forward to the day of no circles :)
1st. Never use a cutter or sort of sharp knifes to dismount the old lenses. Use a butter knife or a screwdriver. 2nd You did not clean anything inside the housing with the LEDs that's why You got dust on the screen You can see it at the left side 17:16
3th. You forgot to mention the danger of dust and dirt coming into the housing. Otherwise You have to be sure to test it first at the white Steam VR Area before going into games. And You probably have to repeat this part several times before getting a clean screen.
4th After the mod the distortion may have changed which can be corrected with a lighthouse config update. AND THE MOST IMPORTANT THING is to mention the warranty loss after this modification. I think You should mention that to everyone here. Because they blame You later for this which was not mentioned before.
But what I can tell it blows everyone off. I did it a half Year ago and it's amazing.
hmmm First this is not a official video ! this is me sharing a experience... what people do with their vive or anything else for that matter is their problem i'm not going to put disclaimers on my videos ...duh if they are too dumb to do it they shouldn't.... ps @ 6.55 i'm cleaning the lenses, and of camera i cleaned them with a special solution they use with camera lenses...
and i cleaned the screens as well...yep there was some specs in the lens but one tap in the HDM and it was gone.....now everything is white clean as a whistle.
and there is no distortion what so ever....if the lines run straight there is no need for any adjustment.. so sorry to disappoint you . I'm just having FUN ! and still am....
Hey there. There is no official video. It's a mod by the VR Community. You're right. Everyone is responsible for their own doing with vive or anything but at least You showed some kind of tutorial even if not mentioned. Its an open video so people could be interessted in already. As You describe in Channelinfo "Hope to keep You informed in everything" Sorry didn't see the cleaning but I updated my comment. How ever the distortion is relative and destracts different peopIe with different IPD messures. Just because You can't see it does not mean others also can't. I don't judge Your doing I just wanted to tell You that this mod is not for everyone and You should show and tell more about this mod or have a disclaimer. Keep VR alive! Hank
@@VR-CHECK personally i think VR is very underestimated.. people try them out but VR is something that grows on you... your brain must adapt once your eyes and brain get it then you will have MEGA fun... unfortunately everyone just tries it once and a while and that's not enough to get used to it.... But thanks for the comment.
HANK's VR
he is just giving advice, if you are the type of person to do something like this to your expensive Vive do you really think people will watch this video only and not do anymore research. If there are people like that then thats there problem and maybe they should not try to mess with things they clearly dont or cant see the risks. I really enjoyed the video and thank you for taking the time to make it. cheers from the UK. Channel VR
I bought this , it reduces the Fov and shrinks the scale of the image
Id does indeed reduce the FOV but with the VIVE you can compensate that with the hardware. Shrinking you can compensate with the software. However still 20% of the people dont see a difference. But lets agree anything is better then the awful GODrays.
Cool video! Your funny. I just got my lenses delivered today. Can’t wait to install.
Thanks , sure you will be happy with them ;-) Just make sure you always take time to center your HMD so your eyes are smack in the middle so everything is in super focus !
Can you update? I have Valve index, haven't opened it yet. It's Vive Pro better than index if it has lens mod?
@@victord3093 a different person said its so much bettern the valve index. Im so happy i stuck with my vive pro. This kind of upgrade scares me but i will now order some lenses and upgrade it.
@@BigDaddyMacc I have the valve index and I'm not blown away. Please post some feedback after you get the lenses installed
Great video. Ordered lenses this evening. Can't wait to get my 20/20 VR Vision...
nice to hear, hope you wont be dissapointed.
Love the dog, thanks for the info
Prima video. Ik twijfel tussen de Vive pro en de Index. Ik heb nu een rift s. Heb jij ervaring met de index. Ik speel voornamelijk Skyrim, Eleven table tennis, Pavlov en Elite.
Nice video! Subbed! I can't choose between the Index or the Vibe pro. I own a rift s which is great. I play mainly Skyrim, Pavlov, Eleven Table Tennis and elite dangerous. Do you have any experience with both? Kind regards.
sorry enkel ervaring met vive en vive pro....heb wel al tot 10 soorten om mijn hoofd gezet maar niet lang genoeg om een oordeel te kunnen vellen. Laat je niet vangen door HOGE resolutie want dat kan je GPU toch niet aan. Ben nog altijd superblij met de ViVe pro met lens upgrade (boet een klein beetje FOV in maar valt echt mee)
ps THanks for the SUB ! 👍
I WANT YOUR RIG! So Sweet! Now I need to look through your other vids to see if you talk about it. Sweet stuff!
give me your address .... i will mail it to you... hope it fits in your mailbox...LOL Thanks mate...gonna do a rig build tutorial video...the rig it self wil only cost about 150 euro....so good for everyone..
Dude..
Just found your channel by chance, this reminded me to fit my lens I bought ages ago to my pro.
Like your humour and mistakes, which we all make. Keep it up.... Greetings from Brexit fucked UK.
Could you do a tutorial please how to apply the distortion profile please . Because right now with the lense mod I feel dizzi and the world scale is off . Things are a bit too small
I thought the same thing, why didn't HTC do this? Not sure if the Fresnel lenses are just a carry over from the older screen tech.
Channel VR Hello so I looked at a few stores online and they have measurements which i know nothing about... so i should get my vision checked at an optic first and then buy these measurement made lenses or are they like a one-size-fits-all? Thank you great vids!
You have 2 versions... Normal non fresnal lenses for people that don't wear prescription glasses. And second the prescription version where you have to give the correction to the vendor so they can adapt the lenses. These you should only buy if you are wearing glasses and you want to take them of for VR.
Alright, thanks !
That fly looked real..!!!! I'm getting some of them lenses x
Actually the fly was animated by 3DFX... 😜👍
@@channelvr1293 Thats even better.. :-) Just make sure you don't trap the thing in the headset while you teleport... We all know what happened to Jeff Goldblum
These Dilivered what they Promised, But the Eye Strain Cancelled it all ..
didn't' really have any problems....depends on how long you use them...
Hi and really appreciate the video !
I know this is a very old post but what I was a bit worried about in performing this upgrade was that with the original vive and one of the main reasons I bought it over any other headset at the time was because of its better field of view especially as you could make the faceplate thinner allowing even more of an increase as you could get your eyes closer to the lenses so wondering as the gear lenses seem smaller and because of the 3D plastic insert making the screen distance even further - would you have to sacrifice fov then ? Cheers
hi there, yep there is always a sacrifice in FOV but i compensated that with a very thin faceplate and i have to say its more then worth it . You can use these lenses with the vive and the pro version. Works perfect for me. ;-) I got the Pro 2 now and have to say these fresnel lenses again are awefull.
Channel VR Wasn’t expecting the reply - thanks again . So just to reconfirm I have my vive with the reduced faceplate thickness mod and the fov increase as a result so if I use these new lenses with the 3D printed plastic inserts there will be no decrease in fov right ? Appreciate this as it’ll cost over £20 to buy these . Just though with the increased height of the inserts you wouldn’t have been able to get your eyes as close to the screen as you could of with the original lenses ? Thanks again
Further to my post - Channel VR Wasn’t expecting the reply - thanks again . So just to reconfirm I have my vive with the reduced faceplate thickness mod and the fov increase as a result so if I use these new lenses with the 3D printed plastic inserts there will be no decrease in fov right ? Appreciate this as it’ll cost over £20 to buy these . Just though with the increased height of the inserts you wouldn’t have been able to get your eyes as close to the screen as you could of with the original lenses ? Thanks again
@@paulnicolas172 well as long as you dont wear glasses the FOV will only diminish with a few degrees but that is more then worth it because now you can look everywhere without seing those damn rings.
Ok, just installed them and tested... Sharp area definitely much higher, so it does not bother anymore... BUT: contrary to what it is advertised you definitely lose some of the FOV. But for me the trade of is ok. I'd rather have the clearer image.
i have new lanses on both the Vive and the Pro now and i have to say ....you have a much better result with the Vive Pro... with the vive it looks better but it also seems to magnify the image so now you can seen this mess grid in front of your eyes more if you focus on it... with the Pro however the results are STUNNING !
oh btw you can make your FOV larger by taking of the faceband and putting on a thinner one helps a lot....my eyes almost touch the lenses..
Marcel, you are right. The FOV is dramatically affected I bought the new lens mainly because this review, however I was not taking account the FOV reduction. The quality is amazing, but the FOV is not good. Channel, would be very informative if you do a new video talking about FOV difference, I really didn't find any one talking about that, however it's an important aspect.
i think i can make the FOV better by printing other rings . like i said in my video they protrude outwards if they would go inwards it should solve the FOV.
but a easy fix is a thinner headband. For me FOV is not a problem because i use the HTC mainly for simracing and well if you wear a helmet like in real life this is just about the FOV you get from this.
How is the glare effect with these lenses? From what I can see they don't seem to have an antireflective coating, and the only lenses I can see that come with an antireflective coating - which is a must for any type of lens (I used to sell spectacles haha) are only prescription lenses that you put on top of the current lenses... Do you know if there is a reason behind this? I can't believe they didn't even change the lenses for such expensive tech as the HTC Vive pro.
Anyway, very informative and helpful video! :) I will look into replacing my Pro lenses but don't know if it's worth it without proper lens protection.
nope no antireflective coating but dont really think you need that ...i wear lenses and glasses... and this upgrade was like having prescription glasses after having seen bad for life...LOL i'm not going back.... hey even if you dont agree the only thing you have lost will be 35 $ you can always put the old lenses back in .....no problem.
There is no reflection on the lens from my face side if everything is dark...
Hoe zit het met de FOV, blijft dat bij mijn Vive Pro wel hetzelfde na deze mod?
Zal ietsje minder zijn.... Maar voor simracing verwaarloosbaar.
Thanks for testing all this for us.
Did not really see what upside down means -> would have been helpful to have video in detail on that part... and what happens with the FOV? The diameter is much smaller than the one of the fresno lenses
This upgrade can still be done on the original VIVE right? Lol im pretty sure its a yes , but I just wanna make sure
Yep that's a yes however you will lose a bit of fov...that is if you're Vive has the new headstrap . Because the new headstrap limits the back to front movement of your lenses. But yeah works like a charm... done it in my first Vive .
but what did they do
I loved your video and it convinced me to order the Vive Pro, which i just did. Ik had pas in de gaten dat je Nederlands sprak toen je "In je mand" riep. Ook gesubbed, goed kanaal en top videos!
LOL thanks men zegge het voort...
Could you find another site where thos incredible lens are sold? Etsy does not deliver in canada ;/
The Vive Pro is great but the lenses that they come with are horrible. The peripheral vision is just too blurry. I constantly have to turn my head directly at something to read it.
yep same here that's why i bought the lens upgrade ....meanwhile i'm thinking of getting the HP reverbe G2
I noticed the new lenses are smaller in diameter. Doesnt it reduce FOV?
yes and no.... because they are closer to your eyes then the fresnel ones what should have been a reduced FOV is now really negligible . So maybe by 2 % but the clarity makes up everything.
how does it affect fov and screen door? 3d movies must look better
dont have any screen door...FOV is a bit less..but its worth the sacrifice(if you even can call it that)
do these lenses fog up easier then the old one?
Did you have to keep the left and right lenses identified so they go into the the Vive the same way? Or does it not matter?
Nope it's all the same.... don't do like I did in the video..turn them around but you will notice that straight away 👍😉
@@channelvr1293 Okay but it should be mentioned that on the Vive it does matter whic h is left and right in case someone wants to go back.
@@channelvr1293 Thank you for letting me know about that 🙂
@@channelvr1293 last question. Did you have to update/change software like some posters are saying? Or did they work without that? I think they called it "Barrel effect" or something
@garyking6365 nope, nothing at all. Old lens out new one with the holder in..did use a thinner face pad. Increases the fov.
Also don't you have to get into the HTC software and modify some settings? I actually got the gear vr lenses myself about 4 months ago and installed them but there is barrel distortion and there is a way to fix it.
I honestly don't have any distortion.... i really think it has to do something with the lenses or lens holders...because it seems a lot of people doing the upgrade seem to have problems.... i however have a perfect field of view....
@@channelvr1293 It has nothing to do with the FOV. The new lenses are heavily curved. The old lenses were not. So the picture, which is projected through the new lenses, is also (more) curved now. This is what they call the "barrel distortion" and the Vive needs to be adjusted.
It is a bit difficult to describe. Maybe you don't notice it, because it has little impact in the game(s) you play primarily. It should be very noticable in the SteamVR lobby though, the room you are in by default if you just start up SteamVR.
The new lenses (from Samsung GearVR RM323) and adapters (from Thingiverse) are actually all the same, so there are no "good" or "bad" adapters (if printed correctly). I did the GearVR mod too and noticed the distortion effect instantly in the SteamVR lobby and had to apply the distortion fix from Reddit.
@@nuclearping i have seen all the video's of sweviver.... however i have done the same tests as he has... i'm also standing in a Cubic room made out of straight lines like standing inside a rubik's cube... so if you are standing inside the cube and all the lines are straight....in all directions.... perfectly aligned... i'm happy.... i have no barrel view.... so nope i'm not changing anything in the software just because others out there have done so... I'm not a person that if everyone else jumps in to the water that i will jump too. I have come this far in life by doing my own thing and not let me be influenced by others . ( i have actually sold red wine to people telling them it is white wine and up till now nobody has tasted the difference ... says a lot about people . I poor the wine into dark Glases and chill the red to 12C° ) but still i think you understand.... i'm almost 50 and have been there and done that ... Oh and one of my friends is a well know eye surgeon and he tells me the lenses ar perfect . You know what is the most important in VR..... your IPD this can make or break your VR experience better then measuring it yourself people should go to a optician for correct measurement. IPD is horizontal but vertical measurement is just as important that's why my video's from inside the HMD suck.... because its important to but the camera (or your eye for that matter) smack in the middle of your lens to get the best results.
so thanks for the info ...but in my case not necessary....
@@nuclearping idf you see distortion is down to where your eyes sit in proximity to the lens. fresnel lenses dont have this problem. you could hold the headset in your had t arms length away and what you see through the lens is undistorted. vs these lenses you have to have your eyes be in the right plce. for some people that may be where their eyes naturally sit.
also my theory of why vive doesnt use these lenses in production is maybe these lenses are worse for the eye.
Hmmm I'm no doctor... But I do know a very well known eye specialist... I will try to get answers from her. 😉👍
@@channelvr1293 good man. Thankyou!
Thank you SO MUCH for solving my problem with the replacement Gear lenses: I had, indeed, put them in "upside down" because that seemed to be the natural way. The result was an intense barrel effect. When you said they should be placed to face closer to the eyes, rather than farther away, that made me realize I'd done the same thing that you first did. I think a lot of people who later complain that the new lenses don't work for them may have done this! My OG Vive is working great now!
glad i messed up for you ...LOL saves a lot af people a lot of time.... have fun with the new lenses.
Does you're FOV get smaller with these lenses?
Yep just à tiny bit.. But the clarity compensates for that loss.
Clarity >>>> fov
Hi, i loved your video. Just to know. did you installed something on your PC or the only modification you did was physical ?
Hi, nope didn't change anything on the pc... Just the lenses. Didn't even have to install correction software like some people suggest... Works just fine.
@@channelvr1293 Thank your for the answer. I think that the time is come for me to do it.
@@mohsart9527 go for it i'm sure you wont be dissapointed.
Lol you threw those lenses across the room you could have sold them they are 150usd to replace so hopefully if they are not too scratched you might be able to get a few bucks back on them on ebay
AARCHHH......i'm a idiot....LOL nope nice and safe in a box....
@@channelvr1293 lol we all make mistakes bud. Not sure how much of a second hand market there is but i know when mine got scratched due to my glasses rubbing against them i found out how much they were to replace i looked around for second hand ones but couldnt find any. Fortunately i came across the gear vr mod too and havent looked back. I also have a hp reverb but my go to is my vive even though the reverb has better resolution. Its just got a great build quality and although heavier doesnt hurt my face like the cheap build quality of the reverb. I'm sure it feels cheap due to them trying to reduce weight but its really bad and uncomfortable.
that is one baller setup haha
Nice!! Did you have to change the steamVR distortion setting with the
City17Ug Lenses? If yes, how?
Hi well eeuuh NO ... there is absolutely no distortion that i can see ....lines are straight in horizon and vertical so nope not really a issue ....you just loze a bit of FOV but i counteracted that with buying a face cushion that is half as thick as the original one to your face is closer to the lenses. that widens the FOV.
hmm.. what config setting did you use after swapping the lense? i tried pro v.14 config but distortion is still horrible. i am using gear vr 2016 lense.
Yes a lot of people have talked about distortion...I however haven't got any distortion what so ever. I'm thinking maybe there are different types of lenses out there and also the quality and position of the lens holder my have something to do with it.
@@channelvr1293 i see. where did you get the lenses from? could you provide the link?
@@GoodGuy374 sorry for the late response ..link here : www.etsy.com/nl/listing/618525953/complete-gear-vr-lens-and-adapter-mod?ref=shop_home_active_8&crt=1
OMG why dont they make them for a samsung Odyssey or rift?
I don’t see for that headsets the lenses and printed holders
Sadly they cant ship to my country, wish they had..
Can you do this on the vive pro 2?
nope not for the moment ....the lens configuration is different..... but i'm looking into it because i got the PRO2 so we will see...
Thing about this Gear VR lenses mod it seems like I see alot of black to the right and left compared to the vive lenses. Kind of dont feel as if I am in VR anymore . I dont remember it feeling like I was looking thru 2 small holes while playing. Maybe I didn't notice it before. When I focus the headset outward it gets way worse. I did the barrel distortion fix but I dont think that has anything to do with what I am talking about.
Anyone else experience that?
I understand the lenses are alot smaller but didn't expect to see so much black on the outsides of the image. If I move the IPD way out it helps because it moves the lenses outward but it just makes it blurry because my eyes arent that far apart.
get your eyes closer to the lenses by using thinner foam to make a custom face pad.
Greetings, I've just got my vive pro(loving it) and yeah I hate the Fresnel rings, could you let me know where you got the new lenses from?
Many thanks for sharing your experiences :)
yep you are gonna have fun with the VIVE PRO...but once you will get those lenses in you will be amazed.... here's the link...: www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod
@@channelvr1293 Many thanks! Can't wait to get them :)
@@channelvr1293 So i just received my new lenses and man what a difference they make, No more rings! Lens swap out is super easy and they popped in nice, it's like a different kit now :)
@@SeanArcherSDA can i say ...i told you so ?? glad you are happy man.... that's the whole point of sharing stuff on youtube...
@@channelvr1293 They don't seem to ship to the Netherlands (at least not with the link you've given).
Can you post where you bought these exactly with the lens installed? Your link it says lens not included.
www.etsy.com/nl/listing/617255782/htc-vive-lens-upgrade-gear-vr-lens?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=vr%20lens&ref=sr_gallery-1-3&organic_search_click=1
@@channelvr1293 Thanks, I bought a gear vr, now just have to get the adapters printed. I should have waited for your reply.
@@sabresuplay9068 sorry it took so long .... yep waiting is something i'm very bad at too.....too impulsive.....hmm
The link Channel VR posted is wrong. These are the ones he bought:
www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod
I'm confused how can you put the lens in upside down? Do you mean you put them on the wrong eye?
i meant wrong way round......
Did this reduce the screen door effect at all?
There is no screen door effect at all in my VIVE PRO
@@channelvr1293, that's not true I own a vive pro and there is still a decent amount of sde. Once vr hits 6k there should be no sde at all.
@@niavellir7408 I think that also depends on your eyes, with my old eyes i see very little SDE(Samsung odyssey(not plus)) yet my M8 who is ten yrs younger than me seems to notice it more.
Where did you buy the lenses from? I may have missed it skipping through the video. :-)
He rambles with a shitty mic who can blame you
The original lenses are probably made like that because people we’re getting headaches
Nah because it’s cheaper and they make more money per unit
Are you coming to SimRacing Expo? :)
Would be fun to go ... not so far from Bruges, Belgium but the only thing i dont have is time....got 2 companies and they take up 120% of my time the rest is for my rig and youtube LOL.
Nice vid! But it looks like you lose some fov with the new lenses do to the blue attachment things?
And one other question. You don't get lower back pain when driving in your rig? I can see that you extend your legs in a quite straight position. If you do, or will start to get lower back pain, try to move your pedals a bit closer to you, so you can have your legs a little more bent.
You are very right my friend....i have wanted to do that for a while now....but i have BIG friends and they all wanne have a go cant put my chair on rails...because of the seatbelt.. i do indeed get back pain when i'm in there a long time.
Channel VR You should make it fit your needs mainly.. ;) your back problems can actually start to affect you even in other situations later on otherwise.
How about an adjustment, making it possible to change position of the pedals for when your friends come over?
and right you are again...... will do.. ;-)
on the field of view ....nope you would think so but NOPE FOV is the same is in my normal VIVE.
+Channel VR Ah okay, that's good!
Zeiss lenses (Zeiss VR One Plus),>>>>> Gear VR lenses
Hi there, I was recently planning buy a VR for me. I do lots of research, most of people recommended that get HTC Vive Pro with Gear VR Lens Mod Upgrade + Valve controller. So I have question about this Gear VR Lens Mod Upgrade. I saw a post on reddit(1. www.reddit.com/r/Vive/comments/86uwsf/gearvr_to_vive_lens_adapters/?st=jg0a1omp&sh=5cbb0850 2. www.reddit.com/r/Vive/comments/86uwsf/gearvr_to_vive_lens_adapters/dwdigxa/) They mention about the 'pre-lens distortion algorithm'. It's like a file change by PC. However, I didn't see your video have cover this process. So, could you tell me did you miss that process or just because this lens gear you placed on HMD which doesn't need the process of 'pre-lens distortion algorithm'?
Sorry for my poor English, hope you could understand what I am trying to reach you.
HI love your vidoes, where did you get the lenses?
www.etsy.com/nl/listing/618525953/complete-gear-vr-lens-and-adapter-mod?ref=reviews
Just sub'd. Looking forward to your Realflight 8 review. I've been simming on Realflight since g3, and I owe all my realworld flying skill to that simulator. I never do anything for real that I haven't practiced on the sim first.
Realflight has had it's ups and downs... though it's always been the most realistic RC sim available. With g8 they've hit a new high water mark in heli sound & physics... and VR is the cherry on top. I hope you enjoy your new RC sim and I hope to catch you on Multiplayer!
where can i buy this?
You can find them online... Just look for HTC vive lens upgrade.
@@channelvr1293 Thank u
Wow nice sim machine u got.. what's something like that worth
well it all depends on what you already have...the fanatec stuff alone can be expensive but just the moving rig is about 2000 euro. You can make it as expensive as you like..Starting with a PC...from 1000 to 3000 euro...LOL
@@channelvr1293 2000 euros for an actuator based 3dof motion platform? where is this from?
@@juholuomala8414 prosimu its a company in the north of france its actually 2000 euro for a 2dof and 3000 for a 3dof...
@@channelvr1293 wow, thanks! why did i not know about this
I bought a cockpit on Amazon like this for under 200$. You remove 2 casters from your office chair and attach it. Very easy and super cool.
I made this mod whit silicon
the link doesn't take me to the vr lense
www.etsy.com/nl/listing/617255782/htc-vive-lens-upgrade-gear-vr-lens?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=vr%20lens&ref=sr_gallery-1-3&organic_search_click=1
@@channelvr1293 thanx very much will give it a shot
There are two versions of the VR lens upgrades on etsy.com. I bought these in carbon black:
www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod
I think Channel VR bought the same also since his lens adapter color is blue. The link he posted is for the other version, which only comes in black.
These lenses have a shocking FOV
with shocking you mean good ? or bad ? i have new and thinner facepads and adjusted the hmd so my eyes are closer to the screen hence bigger FOV
Channel VR I mean bad
@@RoscoePablo weird because a lot of people tested these out and the FOV was practically the same.. sure they are in the right way..
Channel VR yes bulge on the outside I even tried them the other way around just to make sure, I will order thinner face pads see how that works out.
I did about 2 hours off Assetto Corsa they look really clear, but the FOV is really bad. You can even tell just by look at the lenses side by side the originals are heaps bigger diameter.
Links not work!
sorry the links keep changing. just look up in google ...etsy.com
any link for the lenses ?
you can order lenses here : www.etsy.com/shop/CITY17UNDERGROUND scroll down and you will see them. ;-)
www.etsy.com/listing/618525953/complete-gear-vr-lens-and-adapter-mod
wat doet Nederlander met 2000 euro vr set. lol
uh it's upside down broooo
yep just like i said...LOL ;-)
x')
DO NOT buy these lenses if you wear glasses. They protrude and touch your glasses.
true but....you can actually buy prescription glasses so you get the best of both worlds no irritating glasses to wear inside the HMD and better vision.
Hit sub! Really like your simulator.
It would be good to read instructions before making an instruction video :)
i have never read a manual in my life .LOL but in this case there wasn't a manual ...just the lenses in a envelope ... i could have left this out of the video and nobody would have known a thing...but that's me...it is what it is....
You tube and vids like this are here to help people and are instructions..If i'm honest i'd have put them in that way also... seems natural. Intelligent people never read instructions they make them :-)
kwist kik nie daj vlaams was lol
yep West vlaming......
All you've done here is maximised the screen door effect, given yourself more chromatic aberration. If that looks good to then great.
well apparently you have the same system and have tried it too... yes ? NOPE i have put this vive on 8 different peoples heads and ALL of them confirm the difference is amazing and none of them see a screen door effect . So sorry but you are wrong . I got people sending me thanks messages saying there vive is so much better.... are they all wrong ???