Nitro Engine Visible Combustion!
HTML-код
- Опубликовано: 7 сен 2024
- ►Subscribe! bit.ly/2m1d1y7
►T-shirts & Hoodies! bit.ly/2kABytm
Support my videos!: / johnnyq90
Subscribe to my channel! / johnnyq90
Follow me on Google+ plus.google.co...
Follow me on Twitter! / johnnyq90
Music:
Rob Gasser - Supersonic [NCS Release]
• Rob Gasser - Supersoni...
Rob Gasser
• / robgassermusic
• / robgassermusic
• / robgasse. . 
Наука
I am amazed at how wet it is inside the cylinder when it is running.
I always thought it would be much more fiery and dry.
Looks like water in there. Cool video.
It was super fat could have stood to be leaned out quite a bit you could hear it in the revs
This engine wasn’t tuned correctly. Very rich.
thats what lubes the upper cylinder
@@thehobbynetwork9979 definitely rich! I’m one to criticise tuning often! but in this case I think it was for the better as it would have been a short vid of it at peak tune before melting.
5:36 , best sound of my life
who else love the process of lathe machine...sooo satisfying
best porn ever!
ritesh I built a silencer my senior year , I said it was a peg for a bike , and I followed exact specs , I still have it . Or do I 😜
Maker could be man, woman, bo,y girl, no voice and now up 2,7 million subs. Not bad eh!
I am too, sometimes, just to relax, I am milling Something down, pretending to have something usefull done. A woodturning machine is even better, I just started.
5:37 When that constipation finally lets go in the bathroom.
Marcus Meade this, this is true, and underrated.
See I have the runs right now and laughed at this so hard a fart and lil squirt in pant.
I'd like to see you run the tesla turbine off the exhaust of a nitro engine. See how many rippums it can hit. And maybe make a second turbine and attach it to the first to function as a turbocharger.
Its a 2 stroke man, they react very differently to compressed air. It can even decrease power to some extend.
2 strokes actually turbocharge themselves once they start resonating so it won't make a big difference.
I see you caught the AvE bug too? ha ha
StasRyadinsky Guilty as charged.
Nitro exhaust has a lot of oil in it. I think it would flood the tesla turbine, disrupting it's operation.
I am amazed at how 'wet' it is inside the combustion chamber. I always thought of it as a very dry hot gaseous environment. It is soaking wet. Really cool video.
Probably running rich and not high rpm, nitro engines "collect" a but in idle and low rpm, and spit it all when you rev them up... so at its highest rpm, would guess it' going to less wet
@@Photonees The cylinder would have to be wet anyway, since a nitro engine is a 2 stroke and needs to fuel to oil the engine
Your on your chase game !. lol. now that you're done with it ship it to us to film in High Speed.
Warped Perception This needs to be top comment!!
Try to run nitro fuel in your see trough engine
5:37 Flupp :D . Awesome work ! Great Skills at the maschine!
5:37
fart.
NieJestemzPolskiPL is popup engin
NieJestemzPolskiPL I was thinking queef
This vid should be called "how to cut a part for an experiment"
NieJestemzPolskiPL lol lol lol
GrruedudNieJestemzPolskiPL
That was fun! Thanks :)
HEY I LOVE YOU GUYS JUST WATCHED JEM UNVEIL HER AXIAL SX10II!!!!!!!!
How u doin
Hundredth like
5:36 - typical civic fanboy`s car
Ok
at the end the glow plug was like.... NOPE
SgtPiggie lol 😂
Matt Paff model Toki
Matt Paff weather Udaipur
Matt Paff change in the dumb Kotha
Spark plug*
5:36 vtec kicks in yo
Love your precision!
I did'n finish to think "It will burn or explode" that your genius idea made : Ploooup. No good for secret night flights... Lol.
4:29 the engine starts up.
wow....very good. I was very surprised at how wet the mixture was inside the cylinder. Thanks.
*Perfect timing on the ending with the glow plug fart and ejection. Well Done!*
That was very cool. Love the surprise ending.
Love the video johnny, but i dont think theres much point in the music, imo its nicer and more organic if there was just the noise of the machines there. Keep up the good work!
Quite right, the music is 'orrible.
Hahaha in the last video someone was complaining the video was boring because of no music. And johnny replied that in last video someone complained that there was music :DI think this video has perfect balance. Music in the background but noise from the machines etc is dominant.
its so quiet i can barely hear it, but theres something nice about hearing the cutting noises only, plus electronic music doesnt really fit the whole feel of machining metals and plastics :P i like the video im just saying, a little constructive criticism is good :)
The moment when it spits out the glow plug... Priceless 😂😂😂
that last part when the glo-plug came out made me laugh very hard, thank you johnny :D
This is the third time this has come around into my suggestion list and for the third time I'm saying COOL! I've been into Nitro/glow engines since I was a kid, but I'd never been "into" one before, again, really cool :)
Suggest you avoid grinding acrylic on a bench grinder. It melts, gets forced into the pores, and the next time you turn on the grinder, the wheel explodes.
RIP headphones 5:20
mod a nitro engine to a water cooled one.
wrap copper tubing around block and head and solder them on. use a computer radiator for cooling and a small water pump.
also use some kind of thermostat function thats able to controll the water temp.
I just wanted to build one, but never had time. other stuff got in the way^^
That head lasted longer than I thought it would, those engines get hot without a heatsink
Very nice. You should see the color of the Fire by adjusting the Mixture. Some years ago ive done this with the HB Glass Glowplug.But not very long. Then the glass was black...
Interesting to see just how rich the mix is for that. Knew there was oil-gas mix in 2-cycles, but it even seems generous.
Playing with nitro engines, always a thumbs up :-)
i'll never understand how igniting such a small amount of fuel has enough power to push a piston down. in any car.
I knew the glow plug did more then start the engine. The guy at the hobby store tried to tell me other wise. After you remove the current to the platinum coated filament the filament stays red hot because its catalyzing methanol. Instead of a spark you have a catalyst ignite the fuel when it reaches a certain pressure. Varying the glow plug can change the ignition timing of your engine. Anyway to film that with a high speed zoomed in camera? Or be able to send it to a "youtube'r" that can?
That's why they call it a "glow plug". That guy is an idiot. How else would it create ignition if the engine wasnt keeping something small hot from combustion.
@@Shadow0fd3ath24 He's probably confusing it with a diesel glow plug, which is just used as a starting aid. He's still an idiot in my book, because he's giving out wrong advice to customers.
Seth N. I don’t see how he is an idiot the platinum in the glow plug reacts with the methanol in the fuel, you can change the ignition timing by going to a hotter or colder plug, with a hotter plug it will burn the fuel earlier and with a cold plug it will burn later. I don’t see how this guy is an idiot too you
Okay, in the future, you shouldn't use a grinding wheel for soft materials like plastic, aluminium, wood, etc., because the stone isn't designed for it. You should only use a grinding wheel for metal that sparks when it's ground (steel, iron, tungsten, etc.). A good belt sander removes material just as fast, if not faster.
Thanks. I actually knew that I shouln't be using it, but unfortunately I have only this one. I'll definitely change it in the future.
No problem.
I'm a nitro engine fanatic and this is freaking awesome. looks like that kyosho motor has served many purposes for you lol. another amazing video
Great experiment!
and just to add, some engines go beyond 39000RPM which is mind blowing
About 45 years ago I bought a spark plug with a quarz glass? section where you would normally find ceramic. It made it possible to fine tune the mixture from the carb by observing the flame colour in the combustion chamber. It was durable unlike johnnyq90's plastic version.
What engine did you use it for?
@@ElectricSwordfish I worked on many popular cars of the 60s and 70s. Ford, BMC, MG etc.
@@RobertSeviour1 That's honestly super interesting. "See through" engines seem to be trend that started just several years ago....but you were doing that in the 80s. Can't believe I've never heard of such a tool either...what was the name of the tool/spark plug if you remember? Like brand and model name.
Edit: was it called the Colortune?
@@ElectricSwordfish I haven't seen my device in the last 20 years or so but on looking at the Colortune ad, I think that is it.
I liked the fart at the end
Melted plastics in the cylinder, ouch. Good video.
This man is a mechanical artist
It's all fun till the glow plug pops out! Nice vid!! Thankyou!!!
I found it quite surprising just how much fuel wasn't burnt - but I guess that's part of the 2-stroke nature?
produKtNZ any small engine with a carburetor
como funciona esa bujia que queda dando chispa despues del arranque?
the pexiglass be Melting candle because of the high degree of heat, and the piston get the candle out, I've waist all the work, but a good video to observe what is going on inside the engine.
There's 6 minutes I'll never get back.
you don't need the glow plug to run the engine. get it hot then swap the heads over it will start.
i was just thinking this the other day! i wondered why no one has done this and now you did it and my life is complete
Check out the vid of the O.S Rotary with the Plexiglass end plate... very epic viewing right there....crazy engines those Wankels....
It was funny how the glowplug pooped out at the end.
Sweet! Under a load it would really show off :)
First time RUclips notification really worked for me since a long, long time: 2nd viev! Only some time ago, most Videos showing up were over 2 hours old. Thank you RUclips for fixing that issue.
By the way, that Video is pornographic! So nice, your vids. Your Experience with such stuff must be so high. Your lathe is so nice, your Center drill really goes into the Center of the Material. with my 600€ lathe advertised as "Made in Germany" I got one year ago, the Center drill, it does Not matter how I mount the 70€ Roehm drill Chuck, always goes around 1 mm to the right. Bummer. I dont know if there is something wrong with the Tailstock because when I turn something normally, the resulting area is perfectly flat so the big Chuck can't accidentally be mounted in an Angle. Even more of an Bummer.
There's even a name for this particular kind of porn; "competence porn". Watching something for the pure enjoyment of seeing it being done extremely well.
Great video and I love the craftsmanship and ingenuity in your projects! The material that you use looks like polycarbonate, rather than acrylic (Plexiglas). Much better impact resistance than acrylic!
Nice climax at the end
I have O.S Max .21 TM and Traxxas TRX 3.3 Racing engines. And didnt know the glow plug says hot after the heat is removed.
You should totally build a turbo for the nitro engine! that would be cool mod and a decent challenge!
If you recess a stainless threaded tab nut inside ,the plug will stay in longer.
Turning any plastics is a pain, used to hate doing that on the lathe,
Haha that sounded like a wet fart at the end when the plug popped out lol.
Haha the little fart out of it at the end
>grinds acrylic on aluminum oxide wheel
next shot
>has a lathe.
bud..
Good job, you are a technical artist. The noise of your engine make the conclusion : whooaah :)
Can you prove that the glow plugs stays on? When you remove the igniter???
I just dont believe it stays on since the igniter is not giving it juice anymore!
Cuz i have an onboard igniter and the engine seems to run differently compare without the igniter on
Holy what high amount of fuel the carburetor flood it with! I guess its normal thought but dam that amount.
love your precision! I wonder if it is possible to make entire nitro engine out of arcrylic ?
The vest part of this vid, , , FARCE . . WAS WATCHING THE glow plug threads,, melt,,, and the glow plug separate from the head !!! plexiglass cannot withstand much heat, , , DUUUUH !!
Back to the drawingboard!!!!!
Surprised at how dim or low lit the combustion is!
5:37 Hehehe yeah, I guess that'll happen! :)
Cool video with a surprise ending.
That was interesting seeing just how much a glow plug goes through. Great video buddy
ruclips.net/video/Qo77x94e66E/видео.html
The ending was everything I expected it to be! Nice!
This lamp is very loud and not very bright...
You should not use the grind wheel for soft material it will clog the wheel and it may shatter and cause injury
So fun !
amplified light is visible only at 10.000 15.000 pm
And that's how spark plugs are born hahahahaha
that was not glowplug problem that was the head
no spark plugs were used or harmed in this video.
I want to see you make an entire acrylic nitro engine
Hey Johnny can you mill a complete Nitro engine case how to of acrylic and put the original crank piston cylinder carburetor and sleeve with the acrylic cylinder head fire it up to see what it looks like in slow motion the whole engine running in the acrylic crankcase cylinder and cylinder head it'd be a good idea for a future video
The Golden Comment: 5:05
Well who would have thought! very educational for the short while it lasted. great to see - and so relatively simple
Bravo, FUCKING BRAVO! And it's a kyosho so double bonus!!
Gave me an idea! Checking ohms on a glow plug and reproducing it.
not for long time,thats the engine?you need spark only for one time?then it works?
as a 10 year + journeyman machinist, that was hard to watch lol. but cool video none the less haha
Nice! Next time save yourself some trouble by going directly to the lathe at higher rpm's. Also retain original thickness to help dissipate the heat.
make a full acrilic nitro engine that would be cool ecept the glow plug would have to be the only non clear part
Can you make your own cylinder lining (brass), piston and conrod out of titanium please as a video.
Nice ending wkwkw.. like "plueeegrrrrr...!"
im confuse.. how engine life after remove power at plug ? .. like motorcycle keep it running using coil plug.
awesome man just awesome and the end with the glowplug was funny as hell lol
Nice Vid, was waiting to see the glow plug pop out lol.
Woow, this is awesome * __ * I love those engines, and this is just great;) like the backplate last time! The ending was epic:D
when i thought it was gonna overheat it popped the sparkplug lol
Not a sparkplug
vince is right, not to be a pedant, it was a glow plug.
5:36 fail LOL
Enjoyed the video and kept thinking how much heat can the plastic take? Then plop out comes the glow plug and the temp was reached. After watching these different videos of transparent heads on different engines I'm really amazed at how much liquid is in the combustion chamber when alcohol is used. Warped Perception has some really good slow motion vids of 4 stroke running on different fuels.
Good job, Johnny. Wise man.
I just want to say that I really love your videos! Keep going!!!!!
Thank you!
That ending though hahaha
Very interesting to see whats going on in one of these things. Good work man, keep it up!
What kind of gasoline did you use by color simply does not recall nitro methane
Kyosho GX-12 engine spotted!
What exactly keeps the glow plug on and why do they fail
glow plug initiates the compression ignition (diesel like) combustion process. Not to be confused with spark ignition.
fail the same reasons any heating element fails. they are small and fragile elements.
5:37 mmmmm done.
Thanks for watching...
I understand the glow plug ignites when glow stick is applied, but what keeps the glow plug continuously ignited once the engine is running and the stick removed?
compression ignition, like a diesel engine.