Great animation! The only problem is that some things were done in an impossible order where one thing would block another from going in, but other than that, I loved it!
The piston-conrod and crank mounting sequence isn´t accurate at all but you got a pretty useful video for newcomers and the best of all is I understood what is Inventor for...!...good job...
The window on the crankshaft is faultly timed, and lets the carburetor spit air, instead of sucking. The window shouldn´t open at the moment the piston starts its downward-travel, but more of half-a-turn later.
Looks sweet! Im going to be building one of these for my senior design cad cam class and actually cutting the pieces on a CNC looking forward to it now thanks!
So does the cylinder act like a piston and when the fuel and air mixture ignite it pushes the cylinder up witch makes the crank shaft rotate or did I just totally get it wrong. Oh wait but that means you would need a spark plug... but did I get it right or no?
You know nothing about these engines! He got everything wrong!!! Just as an example the Piston cannot go into the top of the sleeve, the Piston has to be at top dead center to put on the backplate, the rod and piston both have a front and a back if you get either one wrong you will destroy the engine, he did not show the shims that go on the button head, did not show the pinch nut that holds the carburetor on, did not show anything about the glow plug, did not show anything about the compression collar for the flywheel, ECT...
This a****** almost destroyed my daughter's OS Ty Tessmann engine!!! She came in and asked for tools cleaner engine. What I asked her what exactly she planned on doing, she showed me this video then she said she was going to take her engine apart clean. He didn't show the pinch bolt that hold the carburetor on, the needles in the carburetor, the Piston being at top dead center for the backplate, the shims to go in top of the engines button head, difference between the front and back of the rod, front and back of piston, the compression collar for the flywheel, ECT... I'm pissed off!!! I paid a lot of money for her engine! O.S 110% Ty Tessmann engine are not cheap!!!
Are these small RC wankel rotary engins the ones that are usually used in RC cars? An actual inline or v style piston engine at that size would be expensive wouldn't it? because its harder to make and adding the oil etc. EDIT I just realized this is a cylinder 2 stroke engine, but are rotary's usually used? Also I didn't seem to see your spark plug it there? thanks for the help!
Wankel engines are not normally used in rc cars, these 2 stroke-nitro engines are. These aren't normal gasoline 2 stroke engines, they are sometimes called glow engines. These glow engines sort of act like a diesel, but act more like a 2 stroke gasoline engine. They have glow plugs, not spark plugs; and run on a mixture of methanol, nitromethane, and oil. The glow plugs have a filament which is heated until it glows which helps in combustion. The glow plug is just always hot and combusts the gas when it is compressed like in a diesel. Hope this helps.
The fuel is ignited by the compression cause’ it’s hot when the engine has been running for a while, but when you start it cold you need a thing (don’t remember what it’s called) that makes the glowplug glow, when the engine is getting hotter you don’t need that thing anymore because as I said, it ignites on the compression
You have that so messed up! If someone watching this trying to put a engine together you're going to break it bad!! #1 you didn't even put the pinch bolt in to the carburetor to hold it in, #2 the Piston has to be at top dead center to put on the backplate or you're going to break the skirt of the a pistol, #3 the piston cann ot go into the top of the sleeve!!!, Did not show the compression collar for the flywheel!, ECT... YOU DO NOT KNOW HOW THESE ENGINES WORK SO DO NOT TRY SHOW PEOPLE HOW THEY WORK! You're lucky I asked my daughter what she was doing when she come asking for tools!! Told me and showed me this video I was highly upset because she was going to use it to work on her engine!! I assure you if she would have you would have been hearing from my lawyer because that's a $700 engine I cannot afford to replace because she seen your video!!!!! As long as this has been on here I can't imagine how many engine do you have destroyed with misinformation! And how you have not been sued yet is beyond me!
@@Dang911 and I'll put my mustang up against a little piece of s*** BMW anytime in a drag race and if you want to take it to a course I'll let you pick between my Acura or my Volkswagen n
That is if you even still having or it was ever yours! what it look like to me is you saved up your money to go get an instructor and try to teach you how to race. Apparently didn't work out so well but you ain't did it a long time! Georgia by the way you drive up with my God damn Banshee with my Duncan racing eliminator kit engine Elka stage 5 shocks vforce 4 reeds Hanson racing clutch, I got more into 1 on my 4-wheeler than you have in your car again if it is your car! Kelley blue book on either one of the cars I seen is below what paid. So don't talk trash because you made yourself look dumbn
This engine can not operate, the piston skirt is too short and the exhaust port communicates with the crankcase at TDC. A beautiful plan is not an exact plan. Autodesk engineers are donkeys.
No it's not!!! not if you know anything about these engines!!! This a****** almost cost me $700! read my comment on the main to see exactly what he did wrong and how he almost cost me that money! And he did a lot wrong!!
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
Bros editting skills are still better then todays.
Nice Work from an fellow Inventor/RC enthusiast
So is it like a baby diesel?
Great animation! The only problem is that some things were done in an impossible order where one thing would block another from going in, but other than that, I loved it!
The piston-conrod and crank mounting sequence isn´t accurate at all but you got a pretty useful video for newcomers and the best of all is I understood what is Inventor for...!...good job...
Awesome job on the animation. Thumbs up!
Nitro Forever!!!
The window on the crankshaft is faultly timed, and lets the carburetor spit air, instead of sucking. The window shouldn´t open at the moment the piston starts its downward-travel, but more of half-a-turn later.
Looks sweet! Im going to be building one of these for my senior design cad cam class and actually cutting the pieces on a CNC looking forward to it now thanks!
If you did, I guarantee you if you use this video you destroyed it!!! Tell me I'm wrong, I'll wait.
@@mikeEshroom bro gradruated 13 years ago my guy
Smash mouth made the whole thing better
This has won the internet for me
Nice ! love your video thank you so much .
Pritty usefull
You do all that work and leave the axis in the animation?
So does the cylinder act like a piston and when the fuel and air mixture ignite it pushes the cylinder up witch makes the crank shaft rotate or did I just totally get it wrong. Oh wait but that means you would need a spark plug... but did I get it right or no?
Ok...that is freakin cool! Way to go!
whos in 2019?
March 2020
You
2022
The crankshaft's hole is in wrong position, so the fuel inlet timing is bad, but very nice animation.
Assembly order is wrong, the engine can only spin counter-clockwise and a few parts missing... Still a pretty sick animation and shows the basics :P
Juan Marrero it’s a presentation, not an animation
if you're expecting an animation of the actual cycle, it doesn't exist here. look for another video!
2020 still watching it . Animation is awesome 👏 😎
Kanye 2020!
You know nothing about these engines! He got everything wrong!!! Just as an example the Piston cannot go into the top of the sleeve, the Piston has to be at top dead center to put on the backplate, the rod and piston both have a front and a back if you get either one wrong you will destroy the engine, he did not show the shims that go on the button head, did not show the pinch nut that holds the carburetor on, did not show anything about the glow plug, did not show anything about the compression collar for the flywheel, ECT...
The piston goes in first and then the sleeve it's impossible to shove the piston in the top of the sleeve
right
Exactly correct
This a****** almost destroyed my daughter's OS Ty Tessmann engine!!! She came in and asked for tools cleaner engine. What I asked her what exactly she planned on doing, she showed me this video then she said she was going to take her engine apart clean. He didn't show the pinch bolt that hold the carburetor on, the needles in the carburetor, the Piston being at top dead center for the backplate, the shims to go in top of the engines button head, difference between the front and back of the rod, front and back of piston, the compression collar for the flywheel, ECT... I'm pissed off!!! I paid a lot of money for her engine! O.S 110% Ty Tessmann engine are not cheap!!!
Because the sleeve it tapered 100% correct
The best animation until 2021
Graciad muy buena animación(ahora lo entiendo mejor)
Great video!!!
nice
I miss studying Autodesk Inventor
+pstaldzor WOW if that's really you than you are one hot number sweetie.
+Peter North ^_^
Are these small RC wankel rotary engins the ones that are usually used in RC cars? An actual inline or v style piston engine at that size would be expensive wouldn't it? because its harder to make and adding the oil etc. EDIT I just realized this is a cylinder 2 stroke engine, but are rotary's usually used? Also I didn't seem to see your spark plug it there? thanks for the help!
Wankel engines are not normally used in rc cars, these 2 stroke-nitro engines are. These aren't normal gasoline 2 stroke engines, they are sometimes called glow engines. These glow engines sort of act like a diesel, but act more like a 2 stroke gasoline engine. They have glow plugs, not spark plugs; and run on a mixture of methanol, nitromethane, and oil. The glow plugs have a filament which is heated until it glows which helps in combustion. The glow plug is just always hot and combusts the gas when it is compressed like in a diesel. Hope this helps.
Are this 2 stroke? How is the ignition process?
Yes two cycle compression ignition engine
Nice work but you forgot to draw and install the glow plug.
Animation!
Cool video bud.
How long did it take for you to model this!?
solidworks ?
yo tambien tengo ese motor esta en inventor samples, de todas maneras el inventor studio del final esta bien
2020 any one
very informative
Nicely done 👌, now for some FEA😀
You forgot the spring on clutch shoes.
You forgot about the clutch spring ;) But its great work.
How how does it ignite the fuel mixture without a sparkplug ?
fuel compression like in diesel creates heat, so the fuel ignite
glow plug at starting would help to warm the fuel
Love the music
thats so cool, good job
The crankshaft is rotating in the wrong direction compared to an actual nitro engine, they rotate counterclockwise.
Thanks a lot
oh. i thought this would go thru the process of designing an engine in Inventor.
Nice animation you deserve my subscription
Nitro engines run counter-clockwise, and you shows😂😂😂
#anitro gaming
Buen vídeo.
how is the fuel ignited?
The fuel is ignited by the compression cause’ it’s hot when the engine has been running for a while, but when you start it cold you need a thing (don’t remember what it’s called) that makes the glowplug glow, when the engine is getting hotter you don’t need that thing anymore because as I said, it ignites on the compression
The engines turning in the wrong direction. :)
bit of a fail for such a good animation.
Jack Pullan it’s not an animation, it’s a presentation
@@TFGgarage It's an animated presentation.
Good game
no lubricants?
+Oscar v its a 2 stroke the lubricants are premixed in the nitro fuel.
Ohh that's right, thanks for clarifying
where can I get a toy car from that
Try a local hobby shop, nitro cars are awesome! Bring $300+
Der Motor dreht in die andere richtung
great movie ; tnx
Smash Mouth! :D
Where is the spark plug?
its a glowplug
Nah man need to re do this work
Now rc cars are also polluting it better you use solar car because it fater than any rV car it uses how much ever energy 🚙💨🚦🚗🚕🚓
You have that so messed up! If someone watching this trying to put a engine together you're going to break it bad!! #1 you didn't even put the pinch bolt in to the carburetor to hold it in, #2 the Piston has to be at top dead center to put on the backplate or you're going to break the skirt of the a pistol, #3 the piston cann ot go into the top of the sleeve!!!, Did not show the compression collar for the flywheel!, ECT... YOU DO NOT KNOW HOW THESE ENGINES WORK SO DO NOT TRY SHOW PEOPLE HOW THEY WORK! You're lucky I asked my daughter what she was doing when she come asking for tools!! Told me and showed me this video I was highly upset because she was going to use it to work on her engine!! I assure you if she would have you would have been hearing from my lawyer because that's a $700 engine I cannot afford to replace because she seen your video!!!!! As long as this has been on here I can't imagine how many engine do you have destroyed with misinformation! And how you have not been sued yet is beyond me!
Bro if you can't afford a $700 engine, I highly doubt you can afford a lawyer! Hahaha
@@Dang911 and I'll put my mustang up against a little piece of s*** BMW anytime in a drag race and if you want to take it to a course I'll let you pick between my Acura or my Volkswagen n
That is if you even still having or it was ever yours! what it look like to me is you saved up your money to go get an instructor and try to teach you how to race. Apparently didn't work out so well but you ain't did it a long time! Georgia by the way you drive up with my God damn Banshee with my Duncan racing eliminator kit engine Elka stage 5 shocks vforce 4 reeds Hanson racing clutch, I got more into 1 on my 4-wheeler than you have in your car again if it is your car! Kelley blue book on either one of the cars I seen is below what paid. So don't talk trash because you made yourself look dumbn
@@Dang911 ain't you that New Jersey heroin addict? So what would you know about a lawyer that's not a public pretender?
I was Not ready😡
FAIL! ther is no glow plug and way to start the engine1....Great work!!!!!
It's turning the wrong way !
This engine can not operate, the piston skirt is too short and the exhaust port communicates with the crankcase at TDC.
A beautiful plan is not an exact plan.
Autodesk engineers are donkeys.
me podrias pasa el motor por email? gracias
what is that song?
Darude -Sandstorm
+MrMechatron92 Smash Mouth - Walkin' On The Sun
+MR.flappy Thanks ;)
Ok
Thank fuck for the mute.
2020
Thanks best animation i have found about nitro great vid :)
No it's not!!! not if you know anything about these engines!!! This a****** almost cost me $700! read my comment on the main to see exactly what he did wrong and how he almost cost me that money! And he did a lot wrong!!
Tate
Wrong Animation