Это видео недоступно.
Сожалеем об этом.
Speed Gems Ford FE Manual Transmission Adapter Kit Installation
HTML-код
- Опубликовано: 19 авг 2019
- In this video, we will show you how to install the Ford FE adapter kit step-by-step.
Speed Gems
806H S. Division St. Waunakee, WI 53597
PHONE: (763) 767-4480
EMAIL: sales@transmissionadapters.com
WEBSITE: transmissionadapters.com
INSTAGRAM: / speed_gems
You can find out more about the FE kit and the other variety of kits we sell on our website: transmissionadapters.com/prod...
I put a Tremec Magnum-XL 6-spd on a 351w for my 2012 Mustang. Since the bell housing that came with the transmission is separate from the transmission, I got a Quicktime bell housing (#8031) that bolts to a T56/6060 trans, and had a 1-inch spacer made that goes between the bell housing and the transmission. This served to a) prevent the pilot shaft from bottoming out in the crank, and positioning the shifter in the right place in the car.
If it had been available, I probably would have looked at the Tremec TKX trans.
Awesome content this helps a lot guy's out with tough questions.
Im glad I found this channel
We're glad you found us too!
Good work Bob that's all you my bro
Very nice
3 speed od i run from lol i love Fe engines ..Manual fer the win
@Avery Nicholas did you post crazy modded hillery pictures or anything funny to troll him
Just found this and well i inherited a in-laws father’s 73 ford f100 long bed learning about these fords as I’m a Mopar man and also was told automatics are always better but I just like the manuals as for just a better feeling, looking to manual swap the truck it’s equipped with a 360 fe and a c6 behind I’ll be in contact with y’all soon for sure!
auto are better okk some one likes sniffing glue or never drove an old toyota 5 speed the newer 6 speed got a low 1st gears be nice on a v8 swap on something with a all gear any v6 toyota tacoma box is strong for most application r151 tc .nissan cdo9 is a good box to all have adapters
You must be kidding
@Troy Hamilton - Great! Any suggestions/useful comments for folks that don't already have that combination?
Best Regards,
Speed Gems
I like that ZFS47-65 because it's short. I hate it when a shifter in a truck travels way back. I like it all the way forward just enough it does not hit the dash. I'm running an FE with C6 in a 72 XLT short-bed, Crown Vic swap front end. I'm starting to get really annoyed with this old C6
Dam my dad's truck would definitely fly with that trans no old c6
I wish my '59 T-bird was further along. This is exactly what I need.
1st of all thank you for sharing. My question is i have a 1969 Mach 1 I purchased a 1977 Ford Ranchero with a 429 is this the best engine if so give me your opinion on how to build the engine for best performance & horsepower I also want a 6speed tyranny out of a 2014 mustang what do I need to purchase to mount tranny to engine.
Thank Yoi in advance for your help.
Nice I have 71 f100 longbed with fe360 auto
This kit would work with your truck!
Hi! I'm from Mexico City and I tray to understand, do you put a 6 speed coyote transmisión into old ford engine?
With this kit you can put a transmission from a Coyote trans on the an old FE.
So the t45 would hold up to a 390 that was producing around 450 Horse Being Street driven and some weekend drags?🛠👍🇺🇸
It would for a little bit.
I want to put a T5 behind my 66 galaxie 500 with 352 FE...
Check with QuickTime for bellhousings and call us if you need an transmission adapter plate.
What part # is that on (5:40)? Original FE bell housing to a t5 adapter. Thank you !
That adapter can be found on our website and part number MT1000601
Would your adapter plate/flywheel work with a TR-3560 manual from a 05 Mustang GT? I'm wanting to attach it to a 460 BBF from a 1990 E-250 to swap in my 05 Mustang GT
Yes, it sure would work with our kit.
G Force also makes a 1000hp capacity gear kit for the Tremec 3650. They also make a 600 capacity kit for T-5s and 1000 hp capacity for the T-56. I believe they’re all available with syncros or dog rings.
I have an FE390 which I am rebuilding at the moment. Do you guys sell an adapter kit for these big blocks?
This video is for the FE which includes the 390 FE. We have several options for the FE engines take a look on our website www.Transmissionadapters.com
that adapter is compatible with a 390 FE engine
Do you have, or build an adapter for the Mercedes 606 to a gm automatic trans?
We've had that kit for 6 months. There is a video of it on RUclips
@@speedgems3978Need one for common manual transmissions.
Can I put a 6 speed coyote transmisión into a 351 engine?
We are currently working on a kit for the SBF to the 6R80/modular automatic transmissions. We're hoping to be able to adapt this kit so you'll be able to us a Manual gear box with it as well. The kit in this video will accept a Modular manual but it will not bolt to a SBF bolt patterned engine. The adapter plate in the video will work with FE and Y-block engines only.
Hey guys. Do you really have an adapter to go from a world Cup t5 to an fe without having to buy a whole bellhousing? If so I would like to know where you are located and how I could get one. Thanks
I believe we might have what you're looking for. Give us a call when you get a chance and we'll see if we can make it work.
Warning on t5s with a Fe, it works but have to be gentle
@@Coronet_shop hey so I ended up getting one that needed a little bit of fitting but otherwise dropped right on. I have around 550hp and around 600fp and I can be honest I have never really hammered on it full tilt but I have made some hard pulls 1-3 and it's holding I know it's not exactly right but that .72 overdrive with a 3.89 rear end is amazing on the highway 110km at 2200 rpm
@@ScrubBeiber101 nice glad to hear it's working well. I wish my F100 was a floor shifter truck but I'll be fine with my 3 on tree action and 390
Zfs47-65 cant find that transmission I got a 1968 ford f250 I would like to get one of those transmission for my truck with a 390fe
Commonly referred to as ZF 5 or ZF 6 transmission. I would use that as your key words and you will be able to find that transmission without a problem.
Can I fit a tremec 3650 with your adapter plate in a 390 fe
@@mendezgarage6487 transmissionadapters.com/products/fo1002001-ford-fe-to-sbf-manual-trans?_pos=5&_sid=1036c2b55&_ss=r this is the kit you will need for that but we do have it!
Wondering how much for adapter and fly wheel ?
@Gary Goetz - Here is the link to the Kit options you may be looking for:
See Speed Gems Kit #FO2001 & #FO2601
transmissionadapters.com/collections/ford?page=2&grid_list=grid-view
Thank you for choosing Speed Gems Transmission Adapters!
Do that kit work with a ford 360 fe?
We have a few kits that would fit up the Ford 360 FE engine to the Ford Small Block, Ford AOD, or Chevy V8 Automatic Transmission. Visit our site, transmissionadapters.com to see what else we offer!
Should work with all the FE engines....
352, 360, 390, 410, 427, & 428. The block bolt patterns are the same.
@@brandonrobertson6327 That's correct! Only difference with our transmission adapter kits would be going to a different transmission with a few hardware changes as needed.
Mt82?
We do have a kit for the MT82, Kit# FO2601 would fit and comes with a flywheel and starter. Give us a call if you are interested or have any more questions!
I'll keep my 4speed that came on my 390 Lol.
How much is the kit for the fe motor
1500 bucks lol