2018 ACCORD TRANSMISSION FLUID CHANGE 1.5L ENGINE

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • FLUID CAPACITY, TORQUE SPECS, AND PROCEDURE TO CHECK THE LEVEL OF THE FLUID IS REVEALED IN THE VIDEO. CHECK IT OUT!
    THANKS.

Комментарии • 33

  • @jgrisoni1
    @jgrisoni1 Год назад +1

    Thank you for this video, couldn't get the 2 screw bolts of the shield. Had the same tools you have in the video and mission accomplished

    • @Cargorage
      @Cargorage  Год назад

      No worries. You're welcome.

  • @holgate1970
    @holgate1970 Год назад +1

    great video, did not know there was a level plug! always did a drain & 3.75

  • @richardfabrizio8998
    @richardfabrizio8998 11 месяцев назад +1

    Very professional job

    • @Cargorage
      @Cargorage  11 месяцев назад

      Thank you sir

  • @freddyn2254
    @freddyn2254 9 месяцев назад +1

    Excellent video.

  • @jamescc2010
    @jamescc2010 2 месяца назад +1

    What cleaner did you use to spray just curious?

    • @Cargorage
      @Cargorage  2 месяца назад +1

      Brake cleaner.

  • @liljunior805
    @liljunior805 2 месяца назад +1

    I’ve seen other video where they fill up the transmission fluid through another opening closer to the front, which one do we use?

    • @Cargorage
      @Cargorage  2 месяца назад

      As far as i know, that's the only fill plug i know about.

  • @vermontvermont9292
    @vermontvermont9292 18 дней назад +1

    So how do you know when to put the level check bolt back in?

    • @Cargorage
      @Cargorage  18 дней назад

      When theres a small drip then install the drain bolt back in.

    • @vermontvermont9292
      @vermontvermont9292 18 дней назад +1

      @@Cargorage that's what I thought. So when you guys bring a car in, what do you reckon the fluid temp is?

    • @Cargorage
      @Cargorage  17 дней назад

      Has to be normal operating temp. Meaning radiator fan kicks in.

  • @jimmyg8684
    @jimmyg8684 Год назад +1

    What size is the crush washer for the transmission bolt ?

  • @Johnny19O
    @Johnny19O Год назад +1

    Is there a filter for these transmissions that gets changed?

    • @Cargorage
      @Cargorage  Год назад

      I believe there is, but you'll have to remove the transmission fluid pan to get to it.

  • @mr.finviz1753
    @mr.finviz1753 8 месяцев назад +1

    After how many miles we should change cvt fluid in 1.5 accord EXL 2022?

    • @Cargorage
      @Cargorage  8 месяцев назад +1

      I would say 50-60k km but maintenance minder says otherwise. It will pop on the dash as "3" depending on ur driving behaviour. Light will come on from 50-120k km.

    • @mr.finviz1753
      @mr.finviz1753 8 месяцев назад +1

      @@Cargorage thank you so much for your prompt reply, MM hasn’t come yet i drove 41000 miles, and i live in Minnesota where winter are harsh, should i wait for Maintenance sign?

    • @Cargorage
      @Cargorage  8 месяцев назад

      I do it at 60-70km, i dont't follow the MM.

  • @vieboi5483
    @vieboi5483 Год назад +1

    How to know 36lbs?

    • @Cargorage
      @Cargorage  Год назад

      Go buy and use a torque wrench.

    • @vieboi5483
      @vieboi5483 Год назад +1

      @@Cargorage I mean your torque wrench.. How do you know is 36 ft lbs?

    • @Cargorage
      @Cargorage  Год назад

      @@vieboi5483 set the torque wrench to 36 ft lbs then when your tightening, you will hear a audible (click) sound.

  • @jimbike8064
    @jimbike8064 Год назад +1

    How many miles were on the car when fluid was changed?

    • @Cargorage
      @Cargorage  Год назад +1

      The maintenance minder on the dash (sub 3) came on @ 81k km. That maintenance minder sub 3 will come on by itself depending on ur driving behaviour from 50-130k km.

    • @jimbike8064
      @jimbike8064 Год назад +1

      @@Cargorage Thx. At 43k miles on my 2020 Accord. Getting close.

  • @renerodriguez9055
    @renerodriguez9055 10 месяцев назад +1

    For first time trying to do my transmission you don't even explain what kind of tools are using

    • @Cargorage
      @Cargorage  10 месяцев назад

      To remove the cover, use a flat head screw driver and #3 Philip screw. And the drain plug 3/8 square ratchet.
      Thanks for watching.