I really appreciate his thoroughness. Also I like his effervescent character. It’s not overbearing or hyper. He’s smart, he explains everything you need to know, and gives great advice and tips, and he’s friendly. It’s no wonder he’s got 4 million car lovers watching his videos daily, myself included
Jay Beasley agreed. Even the thought and follow through process. I mean at the end of the video he shows a before shot and you can tell he specifically shot it and then shows the after shot. Other (most people) take a before frame and just shoot an after video and show it side by side. This 12:11 minute video took probably 3 hours to make and the process probably only takes 1 hour with drying time. Not to mention the editing afterwards. Attention to detail is 10/10. Out to chip and fix all the window now. 😂👍👌
I just watched the manufacturer's RUclips instructional video, and they should be ashamed. There were SO many great tips in Chris's video that they didn't show. Their repair was even visible after they fixed it! Lol Chris is awesome!!!
Chris, I was a windscreen technician for about 3 years for Autoglass in the UK. That chip came out better than some of the guys doing it for about 10 years. Also that kit you used had pretty much everything you need minus the UV bulb and glass polish. We used to have a vaccume pump and a specilised unit that you could load your repair resin in. I love your videos, keep up the good work!
immi111190 I was a tech for 4 years I was a bit sceptical but this video isn't too bad. Important note to remember is that you can't always see the full extent of the damage even after" flexing it" to open it up for the resin to flow. If your insurance doesn't cover it this isn't a bad method
I know these kits exists, and I know they can be used for good results. But I guess to elaborate on what impressed me, is Chris's method of nicely explaining how it works and how to properly use the kit to it's full potential. Also how cheap it costs, when comparing to getting it done at a glass-shop, where most people would go to without a hint of research before dumping ~$150 for a repair (without insurance).
Sector Exactly, I actually just tried this method on my windshield but sadly it's been there too long and didn't disappear like in the video, but it's def a lot stronger than before
Dude, I'm a diesel technician and I love watching your videos. The way you explain everything in detail and make repairing vehicles simplified for people who are on a low budget takes part of the stress away.
I've seen others, but this video is by far superior. Really appreciated seeing the differences between plate, tempered, and laminated glass. Friendly, encouraging delivery of great information! Thanks so much!
1 hour of watching ChrisFix videos later, "Ok, my resin is done on the curing strip. But now I need to super clean my car, install a short throw shifter, and make my own console box."
I remember thinking I wouldn't use this back when it came out lol. 5.5 years later and I just fixed my windshield for $10 after going to 2 of my past shops and finding them closed down. Thanks Chris! A couple of pro tips for any readers: The manual says to keep the syringe in vacuum for 10 mins, do it. Use a plastic razor instead of the metal one provided. The Pilkington glass on my Accord is very soft and the included razor started scratching it while removing the adhesive so I used my plastic one and didn't have any further problems (no ugly screeching sound either).
As a former firefighter, laminated windshields are great for saving you from flying glass, debris and of course as a structural component but man it is hard for cut even with windshield saws it takes a lot of energy to cut it out to get in, so keeping your windshield in tip top shape is crucial, good job Chris, keep up the good work!
ChrisFix License plates and plate frames will go up for sale on my website in a few days!!! They are awesome and as always I appreciate the support and hope you guys learn something new in this video! Thanks for the support! #ChrisFixDriftTeam
ChrisFix Accurately informative as always. Your channel has inspired me to do many of my own repairs. I drive a Hyundai coupé (Tiberon) any suggestions on repairing rubber trim over the window frame, it's cracked slightly. Anyone?
ChrisFix Thanks, bud! I really appreciate your proper methodology and perfectionist attitude. You really do know how to get things done and explain things very well so many people can understand. And there's no fluff. Straight to the problem to be solved. That's why once I've seen your videos I've had to keep going through them.
This is one of the best windshield repairs that I have seen...seriously, great job. I am going to repair the windshield on my car very soon and I may upload a video as well - before and after. Also, I am definitely going to get the kit with the vacuum syringe. Thank you for this great video!
Very helpful. 2 things to note (from the instructions: - at the step when you pull back on the syringe (to create a vacumm) leave it like that for AT LEAST 10min - At the step when you depress the plunger (to push the resin into the crack) leave the plunger depressed for AT LEAST 20 min Also if you dont have painters tape to catch any resin that might run down the windshield, you can also use a post it note. Just place the sticky side near the crack and fold up on the paper to make a spot to catch it. If you slowly fill the reservoir with resin so it just reaches the top, you most likely wont have any spilled resin anyway
ChrisFix would you please consider making a video on how to restore convertible tops to there original condition. I have a mustang with a tan top and need your expertise! Im sure others will be thankful as well. You Da Man!!
Chris, I just repaired the crack in my 2017 Honda CRV windshield and used the same kit you used in the video, the results are amazing! I saved $138 over paying a pro and my repair even looks better than a previous one I had a pro do, thanks! YOU ARE THE MAN!
Seriously, one of the most informative and easy to understand instructional videos I have ever seen. So full of facts and so concise with real tips and tricks that are likely not in the instructions at all. Thank you for this!
He knows because the instructions on these kits are literally step by step extremely detailed and they even show pictures, not to mention the box has links to videos on how to do it lol I just did this yesterday and it was so easy
I’ve watched several of these chip repair videos……yours is absolutely the most informative and has the best advice on getting a great result…..nice work!
Great video, Chris. I had my car inspected (Tx. Registration requirement). Some schmo asked me if I wanted the little chips repaired. I said okay, then he put a dab of super glue (or something of the like) on the chips and charged my insurance $75. It was a waste of money. The "repair" hardened and the resin faked off. Now I have to fix it on my own. Thanks for the video Chris!
Hey Chris I did your windshield repair last night with my car. Great advice on placing a blue tape under. When pulled the pedestal out, so much Resin came goshing out. The tape catch most and less mess. Your also right the UV Ray’s is needed. It’s cold here and I have it my garage. It had a hard time to cure and dry even after 6hrs.
I'm glad the tape trick worked out, and the more UV you can expose it to, the faster it will come out. Best thing to do is give it time if it's in your garage!
You really really need to push only a little bit more! Don't ask me why I need to repeat this while I am cleaning the whole upperpart of the windshield.
Used your video to do a repair on my windshield. I had seen an older video of yours, but I'm glad I saw this updated vid. Your tips and such were great. I used the Permatex kit that you had in an older video, and it worked great. I had a star crack from a rock, and the product worked outstanding. While there is a slight amount of "frosting" from where the impact was, all of the spider cracks and the small bulls eye are gone. Unless I knew where to look, there's no sign of a crack. Appreciate the help.
I really enjoy the content of this channel, but there’s also little things that most people probably brush past that make me happy, such as instead of telling the viewers to like subscribe comment like most you tubers Chris is always super polite and never makes anyone feel forced into anything by saying things like “if you like the content, consider subscribing”. I know it isn’t a huge thing but it just shows the little extra of the content of his character
+ChrisFix, Please do a series of videos giving an overview of the main systems in a car and their components. The electrical system The A/C system The front end etc. Like this post if you agree
Chris, I love your videos. I restored my headlights and detailed my older car following your instructions and it brought my old car back to life. My wife has a newer car and just got a chip in the window. I came straight here to look for the fix. I feel confident that I could use the resin repair kit, but there is no hole over the damage to her windshield. The exterior of the window is smooth above the damage (smooth on the interior as well). Your laminated glass demonstration helped me understand how this is possible. Is there a DIY fix for that?
Sometimes the crack or void will be so small, Only a few nanometers in with. So tiny and thin that not only can you not fill it with your finger nail, or a thumbtack like he shows in the video… But you can’t even feel it with the sharpest point of an X-Acto knife, Or even a fine sewing needle. But using the plunger and vacuum method duck… The resin will find its way down into the void. Maybe even heat that area of the windshield very gently and slowly with an air dry or small electric heater… or let it sit in the sun… The resin will get drawn into the void. Maybe wipe it all off really good, If you’re really having a trouble with penetration you could possibly even thin the resin. You could also use 99% alcohol and compressed air to degrease the outer perimeter… and it will also help not push any grease, wax, or other oily residue down into the void.
I've watched other videos on how to repair my chipped windshield and this one is definitely the absolute best one. Others still left a very noticeable crack, but this one lives up to it's title: the windshield does look like brand new. Thanks for the step by step instructions, and the little hints along the way that obviously make a huge difference in how well the chip goes away.
Jeeps are structurally different compared to other cars. Also if you flip in a jeep you have a dedicated roll bar for a reason. Its to make up for the windshield folding.
So much easier to use Chris' instructions and tips than the written instructions that come with the kit! Thanks for helping walk me through this and doing a pretty decent job.
Chris is a GREAT communicator and has thorough knowledge of subject. He's the BEST presenter of all on the fix-it web. Congrats and thanks from all of us !
What a coincidence! I just bought one of those kits and was going to do a chip repair on my car on the weekend. Glad to see this video pop up and some of these instructions will be super helpful. Thanks!
Great video - thanks! Some follow-up Qs: * At how many minutes into the 10 minute vacuum stage do you recommend starting to tap/knock the bubbles out? * At how many minutes into the 20 minute pressurizing stage do you recommend pushing the plunger in slightly more, to tap/knock the bubbles out? And then, how long to hold the plunger in (until the end of the 20 minutes, or just let it go back to the upper-notch lower pressure until the end of the 20 minutes?)? * I let the epoxy cure in the direct sun under the cure strip for 20-30 minutes. When I removed the cure strip, the epoxy underneath was not 100% hard. Still a little bit of viscosity. Is that ok? (Note: Seconds later, when removing the over-slop of epoxy (with my perpendicular razor) from the windshield around where the cure strip was, it seemed as all the epoxy was hard and able to be razored away like a fine dust) Thanks!
Thanks a lot! 1. You can give a few minutes before tapping the bubbles out! 2. Again, give it a few minutes to pressurize before pushing it in more, and do it until there isn't anything left in the chip, and just leave the plunger in it's position once you're done! 3. You should be fine conisering what happened but giving it a little more time to cure should harden that up if you ever have to do this again!
@@chrisfix Thanks for the replies, Chris! 1. and 2. When you say to "give it a few minutes" do you mean like 3-4 minutes in, or wait til near to the end of the vacuum and pressure stages? How many minutes into each stage would you recommend the bubble tapping? 2. When you say to leave the plunger it it's position once you're done, do you mean leave it in the upper notch position where the spring clip would hold it, or leave it in the position where you manually pushed it in beyond that upper notch position? Thanks!
Um looking at your reflection in the glass, are you in fact a 200 year old native american warrior with a mow hawk, large earnings and a bear hide coat? Or do you have the camera with mike strapped to your head, with cables, and lanyards running down the sides?
Hey Chris, recently started watching your uploads and I’ve gotta say, they’re the best I’ve ever seen. I do all the work I can on my own vehicle, so I’ve been around the youtube mechanic market, and this subscribe out of all of my various subscriptions is the best one I’ve ever done. My girl and watch your uploads like a tv series, we love how complete and understandable your videos are. Thank you from another satisfied subscriber.
At this moment I have the syringe putting pressure on the resin and it's not looking like it's filling in the chip/star all the way in. Hopefully when I come back there will be better news. Chris's results had me hoping for amazing but I'm going to have to settle for decent. TIP, expanding on Chris's suggestion on extra pressure. I put another notch in the plunger about 3/4" up. Great video, thanks
Thank you so much! I'm just outside NYC and I was quoted $160 by Safelite which is just crazy because I know they do it for the insurance companies for less than half of that! I had a small chip that started to spread and I had very little hope for this product to actually work but it did. I never saw air bubbles with the vacuum and I blew out the plunger trying to add too much pressure but despite all of that it came out perfect. I applied a touch of heat with a heat gun on low during the vacuum and I knocked on the glass during both the vacuum and pressure phases. The slight heat and the knocking really seemed to get the resin in the crack. Thanks again!
Great job! I just paid $40 for professional repair and it does not look anywhere that good. I wish I had done it myself but I had not seen this video yet. Thank you Chris!
Cool! And nice props you used to show the different type of glasses. I'm curious though: how did you fix that crack when someone dropped their umbrella on your back "windscreen" ? Did you just get a new one ?
I've watched a few chip repair resin videos, but that was awesome, lots of really good tips in there that arent in alot of the others! Well done! Something else worth pointing out actually (speaking as someone who does alot of resin work) heat really helps with bubbles and resin penetration, though I do wonder what it might do to the glass laminate.
Lots of comments already but saved me $900 for a repair on my Mercedes SL 550 (yes, they really wanted that much!!), that Why I'm leaving a comment and subscribed. Thanks, Chris!!!
I just fixed my windshield with the same kit you used god it was Perfect ! I even can’t find where my chip was thank you so much just saved 3000USD dollar my car is Mercedes
How did he save you $3000??? If you go to an auto glass shop, they repair chips for $35-$50 per chip. I had it done twice. Yes, it cost 3X more over doing it yourself, but the advantage is that your car is ready in 30 minutes (they have a VERY strong UV light to cure it), and it's done by a pro, so you don't have to worry about messing up. Because once you tried it and failed, there is no way to re-fix the same chip twice.
You'r channel is the only reason I stopped giving car to service and started maintaining myself on weekends as hobby. As a result I now have much more knowledge of the car, fun to maintain it and also save a tonn of money on the process!
As many of these kits as I imagine you’ve sold for them, I think you should get a percentage. Or at least a sponsorship. After watching this video I ordered a double kit. Followed your directions, didn’t even open the ones that came with it. It worked perfectly. I can spot them if I look very carefully but I’m calling it perfect. Thanks dude.
You are a lifesaver! my mechanic wanted at least $100 for this work and the final bill would have been even higher as usual .. now i can repair it myself thank you
I'd be hard-pressed to by find a better repair video of any kind on RUclips - So nicely done - Clear, thorough and didn't waste any of the viewer's time - Subscribed !
Hey Chris! I'm a new subscriber and I just found your channel. I immediately subscribed because you put so much effort into your cars. Your attention to detail is incredible. I know you spend lots of money for your videos but it is all for the best. Whenever you add rigs to your cars ( LED night bar, auxiliary reverse lights), I am completely mind blown on how you manage to have the right tools and the right brain to do the job. Also you are doing extremely well in drifting. ( I watched nearly all your videos after subbing!) Greetings from Australia! Best of luck in the future!
Hi Chris, I'm a big fan. I've got one personal tip to share with you. After letting the bubbles settle and pulling out the syringe, it's even better to top off the pedestal again all the way to the top with more new resin to ensure that there is minimal air bubble being pushed back in when re-inserting the syringe. If you like this technique and add it to your video, I'd be very honored :)
2:50 the tempered glass is the student. The big hammer is the hard work you do for exam, and understand the lessons. Small hammer is one question that screw u up
Hey chris I’ve always been a fan and love your content, you’ve made it a lot easier for me to fight for my dream of being able to build and fix vehicles.
Watched this video last week and even didn't know this glass repair existed , as I had a chip in my wind screen i thought I'd try this out today and low and behold it works but I don't think I would have done as good a job if I didn't watch this video or even know it could be fixed by myself so thanks again Chris fix your the very best .
Or why aren't they made from a polycarbonate that shark tanks are built out of? I'm assuming cost, but to pay three or four times that of laminated glass to have an unbreakable screen, would be worth every penny.
Impressed the kit worked that well, I do chip repair all the time as an apprentice and it alot more intensive, involving first drilling the chip with a Dremel and then pulling it into a vacuum and injecting resin, then you heat it from the inside. And of course curing it after with a uv lamp and a protective film
I really appreciate his thoroughness. Also I like his effervescent character. It’s not overbearing or hyper. He’s smart, he explains everything you need to know, and gives great advice and tips, and he’s friendly. It’s no wonder he’s got 4 million car lovers watching his videos daily, myself included
Jay Beasley agreed. Even the thought and follow through process. I mean at the end of the video he shows a before shot and you can tell he specifically shot it and then shows the after shot. Other (most people) take a before frame and just shoot an after video and show it side by side. This 12:11 minute video took probably 3 hours to make and the process probably only takes 1 hour with drying time. Not to mention the editing afterwards. Attention to detail is 10/10. Out to chip and fix all the window now. 😂👍👌
I just watched the manufacturer's RUclips instructional video, and they should be ashamed. There were SO many great tips in Chris's video that they didn't show. Their repair was even visible after they fixed it! Lol Chris is awesome!!!
You mean 6.2 million car lovers watching his videos daily Jay Beasley
You mean monthly?
me too! :D
Chris, I was a windscreen technician for about 3 years for Autoglass in the UK. That chip came out better than some of the guys doing it for about 10 years. Also that kit you used had pretty much everything you need minus the UV bulb and glass polish. We used to have a vaccume pump and a specilised unit that you could load your repair resin in. I love your videos, keep up the good work!
immi111190 I was a tech for 4 years I was a bit sceptical but this video isn't too bad. Important note to remember is that you can't always see the full extent of the damage even after" flexing it" to open it up for the resin to flow. If your insurance doesn't cover it this isn't a bad method
Thanks a lot!!!
Autoglass repair! Autoglass replace!
@@chrisfix hhzhbkzhdn
@@rsturbaHello. How can I tell if a middle layer ist't damaged?!
As a professional auto glass technician, I'm impressed.
Thank you!
A professional glass tech is impressed. Now that is impressive @ChrisFix
ChrisFix I'm
Thiago Zanatta how are u a glass technician and not know this
I know these kits exists, and I know they can be used for good results. But I guess to elaborate on what impressed me, is Chris's method of nicely explaining how it works and how to properly use the kit to it's full potential. Also how cheap it costs, when comparing to getting it done at a glass-shop, where most people would go to without a hint of research before dumping ~$150 for a repair (without insurance).
Coming back here 6 years later because I remember scrolling through your page for fun and this happened to me today ! Thank you good sir !!
I like how he puts a lot of effort into his videos and he doesn't use $100+ tools like others so we can all do this at home
+Sector thanks a lot!
Sector Exactly, I actually just tried this method on my windshield but sadly it's been there too long and didn't disappear like in the video, but it's def a lot stronger than before
ChrisFix Do this kit works for a chipped tooth?
+Jasper He if its a bigger crack you have to drill a hole through the first layer and use $100+ tools to really inject it in the hole
Jasper He Is the chip small or big?
everyone: **something on car breaks** "nooooooo"
Chrisfix: **something on car breaks** "Yes new video"
J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟ the joy in this voice 😂
J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟ lol
J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟ I'm just replying because of your name
J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟
J⃟O⃟N⃟A⃟T⃟H⃟A⃟N⃟ S⃟C⃟H⃟U⃟L⃟T⃟Z⃟
Dude, I'm a diesel technician and I love watching your videos. The way you explain everything in detail and make repairing vehicles simplified for people who are on a low budget takes part of the stress away.
I've seen others, but this video is by far superior. Really appreciated seeing the differences between plate, tempered, and laminated glass. Friendly, encouraging delivery of great information! Thanks so much!
1 hour of watching ChrisFix videos later, "Ok, my resin is done on the curing strip. But now I need to super clean my car, install a short throw shifter, and make my own console box."
Fat_Cat don't forget to check your muffler bearings and blinker fluid.
leomad408 It's more important than people realize.
I’ve used this video twice now! I might just download it
Awesome! Glad the video was helpful!
I remember thinking I wouldn't use this back when it came out lol. 5.5 years later and I just fixed my windshield for $10 after going to 2 of my past shops and finding them closed down. Thanks Chris! A couple of pro tips for any readers: The manual says to keep the syringe in vacuum for 10 mins, do it. Use a plastic razor instead of the metal one provided. The Pilkington glass on my Accord is very soft and the included razor started scratching it while removing the adhesive so I used my plastic one and didn't have any further problems (no ugly screeching sound either).
Glad the video was helpful! Nice work!
Hi Chris fix😊😊🎉... see videos are helpful!!!
As a former firefighter, laminated windshields are great for saving you from flying glass, debris and of course as a structural component but man it is hard for cut even with windshield saws it takes a lot of energy to cut it out to get in, so keeping your windshield in tip top shape is crucial, good job Chris, keep up the good work!
Its like Christmas present every time I see an upload by chris ahaha!!!
Thanks a lot! I am glad I can produce some awesome videos for you guys! Merry Christmas.
I love Your videos
AhmedMoeTv I know i get so excited when he uploads
same
Im still excited even after watching the video!!!
ChrisFix License plates and plate frames will go up for sale on my website in a few days!!! They are awesome and as always I appreciate the support and hope you guys learn something new in this video!
Thanks for the support!
#ChrisFixDriftTeam
The website is ChrisFixed.com
ChrisFix love your videos, can you make a drum to calliper setup?
ChrisFix
Accurately informative as always. Your channel has inspired me to do many of my own repairs. I drive a Hyundai coupé (Tiberon) any suggestions on repairing rubber trim over the window frame, it's cracked slightly. Anyone?
ChrisFix 2:01 you know what they say about guys with big hands
SUP CRRISFIX YOUR THE BEST
great video! can't wait for engine bay cleaning video
Bryan LaSanta oh yes we need that video.
Thanks and that is the next video!
love from india man
CALL ME ASG same 😍ChrisFix😍
ChrisFix Thanks, bud! I really appreciate your proper methodology and perfectionist attitude. You really do know how to get things done and explain things very well so many people can understand. And there's no fluff. Straight to the problem to be solved. That's why once I've seen your videos I've had to keep going through them.
This is one of the best windshield repairs that I have seen...seriously, great job. I am going to repair the windshield on my car very soon and I may upload a video as well - before and after. Also, I am definitely going to get the kit with the vacuum syringe. Thank you for this great video!
Very helpful. 2 things to note (from the instructions:
- at the step when you pull back on the syringe (to create a vacumm) leave it like that for AT LEAST 10min
- At the step when you depress the plunger (to push the resin into the crack) leave the plunger depressed for AT LEAST 20 min
Also if you dont have painters tape to catch any resin that might run down the windshield, you can also use a post it note. Just place the sticky side near the crack and fold up on the paper to make a spot to catch it. If you slowly fill the reservoir with resin so it just reaches the top, you most likely wont have any spilled resin anyway
That transition from showing us the broken laminated glass into showing us what we need to repair it was smooth is hell lol.
Thanks
@@chrisfix love
Legends has it that once you go Chrisfix, you never go back to the dealership. Right Chris? 😉
#truth
ChrisFix do a face reveal
Arthur Ericson you can find him in other people's videos, I'll link one if I can find it.
ChrisFix, have you done a video on clear film (paint, bumper) protection? Sorry I haven't had time to view all your videos.
ChrisFix would you please consider making a video on how to restore convertible tops to there original condition. I have a mustang with a tan top and need your expertise! Im sure others will be thankful as well. You Da Man!!
Chris, I just repaired the crack in my 2017 Honda CRV windshield and used the same kit you used in the video, the results are amazing! I saved $138 over paying a pro and my repair even looks better than a previous one I had a pro do, thanks! YOU ARE THE MAN!
Seriously, one of the most informative and easy to understand instructional videos I have ever seen. So full of facts and so concise with real tips and tricks that are likely not in the instructions at all. Thank you for this!
Chris :"Dont ask how i know" 😂😂
dont.... lol
He sayed the same in previous video when he was doing something with the instrument cluster :D
He knows because the instructions on these kits are literally step by step extremely detailed and they even show pictures, not to mention the box has links to videos on how to do it lol I just did this yesterday and it was so easy
@@chrisfix tell us pls
@@jacobhanekamp2534 1:25
I followed your instructions to repair a minor crack in my windshield and it worked beautifully. Thanks for posting this.
I’ve watched several of these chip repair videos……yours is absolutely the most informative and has the best advice on getting a great result…..nice work!
Great video, Chris. I had my car inspected (Tx. Registration requirement). Some schmo asked me if I wanted the little chips repaired. I said okay, then he put a dab of super glue (or something of the like) on the chips and charged my insurance $75. It was a waste of money. The "repair" hardened and the resin faked off. Now I have to fix it on my own. Thanks for the video Chris!
this channel is so usefull and satisfying at the same time
Thanks!
Hey Chris I did your windshield repair last night with my car. Great advice on placing a blue tape under. When pulled the pedestal out, so much Resin came goshing out. The tape catch most and less mess. Your also right the UV Ray’s is needed. It’s cold here and I have it my garage. It had a hard time to cure and dry even after 6hrs.
I'm glad the tape trick worked out, and the more UV you can expose it to, the faster it will come out. Best thing to do is give it time if it's in your garage!
I love when he says “don’t ask how I know that”
Don't ask! :p
@@chrisfix lol
Because he did this before.
Yea
You really really need to push only a little bit more! Don't ask me why I need to repeat this while I am cleaning the whole upperpart of the windshield.
Used your video to do a repair on my windshield. I had seen an older video of yours, but I'm glad I saw this updated vid. Your tips and such were great. I used the Permatex kit that you had in an older video, and it worked great. I had a star crack from a rock, and the product worked outstanding. While there is a slight amount of "frosting" from where the impact was, all of the spider cracks and the small bulls eye are gone.
Unless I knew where to look, there's no sign of a crack. Appreciate the help.
Glad the video was helpful David and nice work!
Looks like Chris's tempered glass is stronger than Tesla Cybertrucks🤣
temper tantrum tampon...
Lol lol lol
Lololol
Boi
Yeah
i can still see it... oh Wait its my broken screen...
lol get it repaired man
Ok
Repairing phones isn't *too* hard. The only problem is that tools can be more expensive to source.
f
WINDSHIELD REPAIR TIME LMAO
7 years later and you still the guy I go to for any car related things. As always thank you!
I really enjoy the content of this channel, but there’s also little things that most people probably brush past that make me happy, such as instead of telling the viewers to like subscribe comment like most you tubers Chris is always super polite and never makes anyone feel forced into anything by saying things like “if you like the content, consider subscribing”. I know it isn’t a huge thing but it just shows the little extra of the content of his character
hey guys chrisfix here!!!!!! it never gets old bro keep it up.
Thanks a lot man!
ChrisFix how many likes to see you're face in a video
1 million likes on the first video and I think he'll do it.
RL Racing Garage look up his name, a vlogger had his face in a vid
+ChrisFix,
Please do a series of videos giving an overview of the main systems in a car and their components.
The electrical system
The A/C system
The front end
etc.
Like this post if you agree
Cool idea!
ChrisFix when are you going to do the conversion from drum brakes to rotors you said you would five months ago thanks in advance
@@chrisfix what about a series about how to drive a car??
Perfect job! 👍
Chris, I love your videos. I restored my headlights and detailed my older car following your instructions and it brought my old car back to life. My wife has a newer car and just got a chip in the window. I came straight here to look for the fix. I feel confident that I could use the resin repair kit, but there is no hole over the damage to her windshield. The exterior of the window is smooth above the damage (smooth on the interior as well). Your laminated glass demonstration helped me understand how this is possible. Is there a DIY fix for that?
There has to be a hole somewhere because that’s what starts the crack.
Sometimes the crack or void will be so small, Only a few nanometers in with. So tiny and thin that not only can you not fill it with your finger nail, or a thumbtack like he shows in the video… But you can’t even feel it with the sharpest point of an X-Acto knife, Or even a fine sewing needle. But using the plunger and vacuum method duck… The resin will find its way down into the void.
Maybe even heat that area of the windshield very gently and slowly with an air dry or small electric heater… or let it sit in the sun… The resin will get drawn into the void. Maybe wipe it all off really good, If you’re really having a trouble with penetration you could possibly even thin the resin.
You could also use 99% alcohol and compressed air to degrease the outer perimeter… and it will also help not push any grease, wax, or other oily residue down into the void.
I've watched other videos on how to repair my chipped windshield and this one is definitely the absolute best one. Others still left a very noticeable crack, but this one lives up to it's title: the windshield does look like brand new. Thanks for the step by step instructions, and the little hints along the way that obviously make a huge difference in how well the chip goes away.
Windshield is a structural component of your car
Me: drives jeep
Windshield: folds down
Jeeps are structurally different compared to other cars. Also if you flip in a jeep you have a dedicated roll bar for a reason. Its to make up for the windshield folding.
Windshield: folds down
Face: Eats rock
@@BepBepStev it's a joke
Woooosh
Plastic folds up
Just had to fix mine. Wow. Followed Chris’s instructions exactly and it came out perfect. Can’t even tell there was a crack. Great instruction.
So much easier to use Chris' instructions and tips than the written instructions that come with the kit! Thanks for helping walk me through this and doing a pretty decent job.
New episode of Roadkill, Hot Rod Garage, Hoovies Garage, now ChrisFix, and it's the last day of school!
americanchallenger Fellow Roadkill/HRG viewer, respect!
Dang you cannot beat that! Sensory overload haha
Keeps gettin' better and better!
It has been a long time coming!
americanchallenger what grade u im? im 3 weeks in to summer vac lol
didn't you do a video just like this a little while ago?
i think since he got his windshield chipped, he might as well make an updated version to everybody can see it easier
Joshua Corona he did 2 or 3 already
More than one if I recall correctly
Joshua Corona yes
I did a chip repair video 4yrs ago but it is nothing like this. In this video I talk about the different types of glass.
Chris is a GREAT communicator and has thorough knowledge of subject. He's the BEST presenter of all on the fix-it web. Congrats and thanks from all of us !
Works like magic 👍
scienceeeee
ChrisFix can you do a broken gas pump my dad has one it won't start
Danny De La Cruz he replaced a fuel pump on a video called "how to diagnose and replace a fuel pump"
Lmao
8:16 Don't ask how I know that.
Lol i thought that went to the hidden mom Because the comments on my side went to this video
Martin In AU Morning
I guess he did it
LOL Chris probably did blow the tool
Lol
I haven't seen the video yet ,but I bet it will be awesome as always ,keep the good work Chris
I already know you had a blast breaking all that glass. I'm so jealous!
What a coincidence! I just bought one of those kits and was going to do a chip repair on my car on the weekend. Glad to see this video pop up and some of these instructions will be super helpful. Thanks!
+Dohzr awesome! Let me know how it goes!
Some people are gifted to teach and explain things. You are one of them Chris! Thanks for sharing.
Great video - thanks!
Some follow-up Qs:
* At how many minutes into the 10 minute vacuum stage do you recommend starting to tap/knock the bubbles out?
* At how many minutes into the 20 minute pressurizing stage do you recommend pushing the plunger in slightly more, to tap/knock the bubbles out? And then, how long to hold the plunger in (until the end of the 20 minutes, or just let it go back to the upper-notch lower pressure until the end of the 20 minutes?)?
* I let the epoxy cure in the direct sun under the cure strip for 20-30 minutes. When I removed the cure strip, the epoxy underneath was not 100% hard. Still a little bit of viscosity. Is that ok? (Note: Seconds later, when removing the over-slop of epoxy (with my perpendicular razor) from the windshield around where the cure strip was, it seemed as all the epoxy was hard and able to be razored away like a fine dust)
Thanks!
Thanks a lot!
1. You can give a few minutes before tapping the bubbles out!
2. Again, give it a few minutes to pressurize before pushing it in more, and do it until there isn't anything left in the chip, and just leave the plunger in it's position once you're done!
3. You should be fine conisering what happened but giving it a little more time to cure should harden that up if you ever have to do this again!
@@chrisfix Thanks for the replies, Chris!
1. and 2. When you say to "give it a few minutes" do you mean like 3-4 minutes in, or wait til near to the end of the vacuum and pressure stages? How many minutes into each stage would you recommend the bubble tapping?
2. When you say to leave the plunger it it's position once you're done, do you mean leave it in the upper notch position where the spring clip would hold it, or leave it in the position where you manually pushed it in beyond that upper notch position?
Thanks!
I immediately got your membership after I fixed my windshield chip. Thanks Chris, you made my day!
I am glad the video was helpful!
Um looking at your reflection in the glass, are you in fact a 200 year old native american warrior with a mow hawk, large earnings and a bear hide coat? Or do you have the camera with mike strapped to your head, with cables, and lanyards running down the sides?
tangles01 glad I'm not the only one who noticed 😂
Dang you got me!
tangles01 2:10
Nice one, as someone that fixes stuff like that everyday, it's really simple to do! As I call it, it's literally a waiting game!
Hey Chris, recently started watching your uploads and I’ve gotta say, they’re the best I’ve ever seen. I do all the work I can on my own vehicle, so I’ve been around the youtube mechanic market, and this subscribe out of all of my various subscriptions is the best one I’ve ever done. My girl and watch your uploads like a tv series, we love how complete and understandable your videos are. Thank you from another satisfied subscriber.
That’s awesome! I’m glad you’re learning a lot and enjoying the videos!
Nice comment and name
At this moment I have the syringe putting pressure on the resin and it's not looking like it's filling in the chip/star all the way in. Hopefully when I come back there will be better news. Chris's results had me hoping for amazing but I'm going to have to settle for decent. TIP, expanding on Chris's suggestion on extra pressure. I put another notch in the plunger about 3/4" up. Great video, thanks
"Don't ask me how I know". LOL! Gotta love Chris' infectious enthusiasm. Well done.
*My worst teacher yelling at me*
me: 2:41
*My favorite teacher says to shut up*
me: 3:02
And the laminated glass is when your favorite game is gone.
I dont get it?
TheTopHatMenace what I mean is, the game is gone but it still remains in our hearts.
@@solarisonesixsix, it could've been worded better, but the glass represents his feelings and how much it affected him.
3:03
Yess heeee uppllloaaaded
Lt. Catfish I know
That didn't seem like a little tap 3:01
Thank you so much! I'm just outside NYC and I was quoted $160 by Safelite which is just crazy because I know they do it for the insurance companies for less than half of that! I had a small chip that started to spread and I had very little hope for this product to actually work but it did. I never saw air bubbles with the vacuum and I blew out the plunger trying to add too much pressure but despite all of that it came out perfect. I applied a touch of heat with a heat gun on low during the vacuum and I knocked on the glass during both the vacuum and pressure phases. The slight heat and the knocking really seemed to get the resin in the crack. Thanks again!
You’ve got to be the only guy in the world who gets excited when something breaks on your car 😅
LOL!
Chris, you are a master at teaching and showing how to DIY repairs. 😎👍🏼
OG fans remember he did this already
Exactly
i was thinking the same thing lol. exact video.
Kevin o yea i remeber his original one. it motivated me to make a video with the rain x brand
Kevin Yup!
Heyy guys, ChipFix here, Ive made a chip fixing video every year for the last 4 years.
Great job! I just paid $40 for professional repair and it does not look anywhere that good. I wish I had done it myself but I had not seen this video yet. Thank you Chris!
Awesome channel. I love how you explain everything in detail and give multiple ways of doing things. Thank you for your effort.
Thanks!
2:35 "this is what your side windows and rear windows are made of let me show you why... "*bonk* *bonk*
Do a vid of how to put a turbo if u get one
+_iXF4IS3L_ yes
ChrisFix thanks!
all the videos I've searched and watched on youtube no one fixed it this well as you did Chris. really awesome work buddy
Cool! And nice props you used to show the different type of glasses. I'm curious though: how did you fix that crack when someone dropped their umbrella on your back "windscreen" ? Did you just get a new one ?
I've watched a few chip repair resin videos, but that was awesome, lots of really good tips in there that arent in alot of the others! Well done!
Something else worth pointing out actually (speaking as someone who does alot of resin work) heat really helps with bubbles and resin penetration, though I do wonder what it might do to the glass laminate.
I could be wrong but pvb the material that bonds the 2 glass together and has a softening point around 50-90c
Chris: _"It's still one sheet"_
Laminated Glass: **splits in half** _"u wot m8?"_
Lam Glas
@Trxsh Shut
Lots of comments already but saved me $900 for a repair on my Mercedes SL 550 (yes, they really wanted that much!!), that Why I'm leaving a comment and subscribed. Thanks, Chris!!!
That's crazy! Thanks a lot!
10:49 Ahhhh! My ears!
I just fixed my windshield with the same kit you used god it was Perfect ! I even can’t find where my chip was thank you so much just saved 3000USD dollar my car is Mercedes
How did he save you $3000??? If you go to an auto glass shop, they repair chips for $35-$50 per chip. I had it done twice. Yes, it cost 3X more over doing it yourself, but the advantage is that your car is ready in 30 minutes (they have a VERY strong UV light to cure it), and it's done by a pro, so you don't have to worry about messing up. Because once you tried it and failed, there is no way to re-fix the same chip twice.
You'r channel is the only reason I stopped giving car to service and started maintaining myself on weekends as hobby.
As a result I now have much more knowledge of the car, fun to maintain it and also save a tonn of money on the process!
8:16 Don’t ask how I know
1:27 *massive blown out area on a windshield*
I don’t think the blown out area on windshield was related to that comment
It’s related because that is when he made the mistake. So he is saying don’t ask how i know that by his mistake
i can relate
I can see clearly now, the chip is gone- I can see all obstacles in my way. Gone- is the mark that made me cry. It's gonna be a bright, Sunshiny day!
You should make a song out of that. Sounds kind of catchy. ;-)
Mark Suhre you missed it, flew right over your head lol
fruitydudexD lol
fruitydudexD, I already knew it was a song. Why do you think I put " ;-)" at the end.
right back at me lol flew right over my head xD
Best fathers day gift, this channel,.
Thanks a lot!!! Happy Fathers day!
As many of these kits as I imagine you’ve sold for them, I think you should get a percentage. Or at least a sponsorship. After watching this video I ordered a double kit. Followed your directions, didn’t even open the ones that came with it. It worked perfectly. I can spot them if I look very carefully but I’m calling it perfect. Thanks dude.
I can spend hours watching these instructional videos and never get bored. 😊
same
As a professional glass repair. Now i am very impressed.
Best vid ever on how to repair a chip!!!!!!
Thanks!
You are a lifesaver! my mechanic wanted at least $100 for this work and the final bill would have been even higher as usual .. now i can repair it myself thank you
This homie just taught me about glass
You learn something new every day
you deserve more sub! thank you cause i got same problem
+Kevin Patra thanks a lot!
ChrisFix turbo your DRIFTSTANG!
driveway_auto_body there are over 7 billion people on planet, some family have at least 2 cars.. maybe 2 million is still small enough thou
11:07 I love how he explains literally EVERYTHING he is doing even though removing that tape is common sense at that actual moment of the repair.
I'd be hard-pressed to by find a better repair video of any kind on RUclips - So nicely done - Clear, thorough and didn't waste any of the viewer's time - Subscribed !
New ChrisFix upload *drops everything*
Drinking game:
Take a shot every time he says "chip"
Thanks a lot I died from alcohol poisoning😂😂😂😂
I think I'm still gojfjfzkejdkdfjjsfhdhdhdvsvdhdhsjewgw
More every time he says Windshield
king of random then how did you post a comment
r/wooosh
@@thatchevydude1234 lol 😂 🤣 😁 🤪
Hey Chris! I'm a new subscriber and I just found your channel. I immediately subscribed because you put so much effort into your cars. Your attention to detail is incredible. I know you spend lots of money for your videos but it is all for the best. Whenever you add rigs to your cars ( LED night bar, auxiliary reverse lights), I am completely mind blown on how you manage to have the right tools and the right brain to do the job. Also you are doing extremely well in drifting. ( I watched nearly all your videos after subbing!) Greetings from Australia! Best of luck in the future!
Hi Chris, I'm a big fan. I've got one personal tip to share with you. After letting the bubbles settle and pulling out the syringe, it's even better to top off the pedestal again all the way to the top with more new resin to ensure that there is minimal air bubble being pushed back in when re-inserting the syringe. If you like this technique and add it to your video, I'd be very honored :)
I should’ve known you would come in clutch. One of my favorite RUclipsrs ever!
2:50 the tempered glass is the student. The big hammer is the hard work you do for exam, and understand the lessons. Small hammer is one question that screw u up
Gill Lex good story
Glass: me
Hammer: only 4 questions
Little hammer: 5 parts each question
Me, a grade 12 student- Glass
Amount of work given- Hammer
The last backpage- Little hammer
Niceee
Which has nothing to do with cars...
Hey chris I’ve always been a fan and love your content, you’ve made it a lot easier for me to fight for my dream of being able to build and fix vehicles.
That’s awesome and exactly why I make my videos!!!
SERIOUSLY, GOD BLESS YOU SHARING YOUR KNOWLEDGE! THANK YOU CHRIS :)
Watched this video last week and even didn't know this glass repair existed , as I had a chip in my wind screen i thought I'd try this out today and low and behold it works but I don't think I would have done as good a job if I didn't watch this video or even know it could be fixed by myself so thanks again Chris fix your the very best .
Anyone else get goosebumps when he scratched the glass with the razor ?
Nah that glas dosen't scratch
LUMPIS no
If you do not keep the razor blade straight up and down you can scratch it.
The sound of metal scraping on glass always gives me that weird feeling up my back.
@@techgeekwarren4504 Glass is a Mohs scale level 6 and razor blade is 5.5 so there is no scratches
How come windshields don't use laminated tempered glass?
+Josh because a rock can cause it to break into a million pieces rather than just one small chip.
ah okay -thanks for the reply :)
Josh he literally said in the video haha
I see what you're saying with a tempered/laminated mix, but once it breaks, you wouldn't be able see where you're going
Or why aren't they made from a polycarbonate that shark tanks are built out of? I'm assuming cost, but to pay three or four times that of laminated glass to have an unbreakable screen, would be worth every penny.
Thanks for the video however a while ago you promised to do an engine bay clean, please do it, I need to do it to my car
LOL
Its the next one i think
He said that it was going to be his next video :D
h3h3 wannabe just go to the car wash with the hood open
I am also waiting a video on how to repair deep scratches :)
Impressed the kit worked that well, I do chip repair all the time as an apprentice and it alot more intensive, involving first drilling the chip with a Dremel and then pulling it into a vacuum and injecting resin, then you heat it from the inside. And of course curing it after with a uv lamp and a protective film
7:05 every door salesman😂😂😂
HA HA! Selling Kirby vacuums!!
Jehovas witness
Ronco Chip Repair! Find it at all your favorite auto part stores!