Thanks for these tutorials! Very helpful! Can you tell me how to get the background of my images totally blank? I seem to keep getting a very faint background
I have a question if u have a minute my friend.. When I plug in and switch on my Sculpfun S9 the laser is already on and burning up the object right below it. Is there something I can do to stop that or have I rewired it wrong. I took it apart to have a good look under the hood to see if the board inside was compatible with a CNC Router Spindle but since I connected it back up the Laser is working before I've ever hit the connect button. Nothing moves but the Laser is on full power too btw. This thing burns like a good thing. Could u give me any advice? I'd be very grateful if u have any. Thanks for uploading these videos bcos I'm way behind the curve when it comes to tech stuff. Really bad tbh.
So about 1/2 hour ago i ordered an Atomstack lase, my first, hope the learning curve is not to steep for an old man, I see this as a huge fun then to add to my woodworking and your class has helped me a lot ....Wish I knew what some accessories I need for my new toy perhaps you might have a list? I can ask Atomstack, they will say everything. the Air assist looks like a aquarium pump...
Anthony, Have you found a way to still use Windows 10 with Laser GRBL after the latest Microsoft upgrades? My Engraver is dead in the water!! Thanks Darryl
Hello, I recently got an Atomstack 5A Pro and am trying to use the LaserGRBL software. At least I got the laser to work - that's about it. All he lasered was a line :-(. My question - how can I set the program? The laser drives to a corner, stops because it can't go any further, but wants to keep going and starts to rattle. Sorry for my English - I'm from Germany and I'm translating with Google
This was such a huge help to watch. I will definitely go to your page for any laser engraving questions I need. Can you do a video on air assist for laser engravers (if you havent already)? I have a chinese 5000mW model and am trying to figure out what air assist options I have and how to even use air assist
Thanks for that Anthony, am a new user and your explanation helped heaps. One thing you could maybe do a video on would be to start from beginning to end slowly with Inkscape, it would help a lot. I am trying to learn as I want to make the dolls houses and other items like your lit up tower but you are too quick for beginners I think. Good stuff really enjoyed your videos excellent.
Have another video for initial setup for first time users? I'm curious how I can tell if I actually received a 20w laser. How do I know what baud rate to use?
On Diode Lasers, the Rating is usually the laser's power consumption - not it's output. For a 20 W Diode Laser, the output power will be between 5.0 to 5.5 W. On the Baud Rate - unless you have a very old computer, use the fastest Baud Rate.
Really helpful video, thankyou. Have you engraved laserable rubber on your machine? I have an atomstack 20w and tried to make my own rubber stamps but struggling to achieve satisfactory results. My last effort seemed to be going ok but had to do 7 passes, taking half an hour a time and on its last pass it had moved a millimetre despite being taped down and made a mess! I'm wondering if I can get more depth per pass with different settings. I had it on 4000 mm/? 100% on dithering with a speed of 750. I'm not sure if 'flare ups' at this slow speed burned my fine details away too as it got deeper or if it happened on that last pass being moved. I don't want to waste any more of my A4 rubber sheet :( Or is there a better material to use on a 20w which would make a good fine detailed stamp?
Can you tell me how to do a perimeter run without the laser marking up a piece of leather? as it forms the square I can see the laser marks of the square Thank you
Got your vid from google/you-tube and still have many Q which sure you know answers. So how do I select whatever in lasergbrl and flag as burn or cut... How to select laser level/speed for items? Bought engraver but now trying to figure how to use. What you did do was very good but doesn't get me doing anything yet.
Hi mate thanks for sharing your videos, I have a ortur laser 2 , and I have grbl as software I have dyslexia ,and I like to say your instructions are very good, I’m making a lot of mistakes, do you think lightburn would be better to learn on , many thanks Neil
With the NEJE,, there is a special update from the NEJE website to use LaserGRBL on it. wiki.nejetool.com/doku.php?id=nejelaser_master Scroll down to GRBL controller for windows or mac.
Hello, thank you for taking the time to make this tutorial it is very helpful. I am wondering if you can help me with an issue I am having. My machine will run but nothing is burning or showing up on the material. Can you help me fix this issue?
First,, check your max S setting by typing in "$$" to your console. Look at what $30 returns. Make sure to set your Smax in the second setup screen to that value (typically 1000). Try using a slow speed like 200 or so. If things still do not burn,, you may have a bad diode.
I just bought a new laser but im missing the setting for birch on the engraving options. How can I add this on or what is the best closest option. please please help!!
There are so many lasers. Even thesame laser as another may engrave a little differently. I would suggest doing small tests on a sacrificial piece of wood.
@@brakthehun ye I think I found it or at least for wood I’m using but I found no mater what I’m doing slow and as low as possible seems be best way if I’m rite lol Sorry stupid beginner questions but ther any way in laser gbrl or wood u do a video on how to do/create a simple business card I wanting to do my own on plain white card just simple image and text but I having bit trouble working things out
Would you be able to help me? I’m trying to make a plaque for my job and I really don’t know what to do even after this video. It keeps coming out blank and also not going the right way
@@brakthehun It’s red, I’m not really sure how to engrave and make it nice. It comes out really sloppy. I’m just trying to make warning plaques for my job
The latest version of LaserGRBL has them by default but I have a video that shows you how to make them: ruclips.net/video/wKgJeqJv_y8/видео.html This was before they defaulted to have a perimeter button.
There comes a time when you want/ need to change your mind and go back to change a selection. Is there a way ? I been exiting abd starting over. Can you ask the creator to maybe add this feature?
Hey! I followed the video and alls good!! However, when I'm lasering a circle shaped logo there is a small cut off and the line become crooked alittle. Do you have any suggestion on how I can solve this issue?
Maybe you can help me. I'm new to this. I have an Ortur Lazer master 2 S2. When I start to engrave it will start to run and randomly stop moving but the Lazer is still burning. I have updated the firmware but it's still happening. Thanks for your help. Todd.
I have an original ortur 20 watt Not the ortur 2 20 watt, and I want to make a larger frame. Can I change the bed size in the software to the new size?
Hey , I m sorry for my bad english. I put youre settings from the video on my machine 2.35 min. But it gos crazy fast en it look like it is stretches out. I m trying all ready al day but i cant fix it. Can you help me?
Do you know how I can speed things up, I followed along here, and selected the plywood as my material, shows 80% power and 2000mm speed, however mine runs real slow and on the DRO the F max's at about 300 and everything is real dark and burnt. The vector part seems to work, TIA
@@brakthehun I have a cheap 3018Pro, My max speeds are set to 2500mm/m, I'll go look at your videos, but seems very slow compared to my K40 laser. The goal of this machine was to be able to drill my crib boards then engrave them without changing machines. I do that now and it is a pain to line up.
@@Hoss_1966 you can up the max speed on most of those to 4500 ($110=4500 $111=4500) I've had a few 3018 and 4018 machines and the seem to run fine at those speeds.
Hi, -Great tutorial Any ideas how to find the line number it has got to when my laser stops working sometimes part way through a program. You show how to start from a specific line number but not how to find it I am using the latest version of laserGRBL (version 4.6.2) Regards Bob
So with LaserGRBL I cannot position the image anywhere on the grid. So, for those of us who have the Pro version with the smoke alarm right by the Home (0,0) lower left corner; it detects smoke as soon as it starts because the etch/burn is within inches of the detector. Can I move the image anywhere on the grid? Other than that, thanks for the video.
The centreing and framing buttons are grey in laserGRBL even when successfully connected to my atomstack. I have just set it up for the first time. Does anyone know why this might be?
I believe they are included with the software now. Right click near the button area and click import The navigate to: C / program files(x86) / LaserGRBL Scroll all the way down and there should be a button file
Tony when I click on Laser Configuration it says Error reading configuration. also homing is not set up I can't even move the gantry in any direction. Please help.
I need to add a perimeter button and just trying to figure out how to make the wood-burning a little bit darker and I don’t know if either one of your former coworkers are used to live in North Carolina are you can look me up on Facebook
Hi, Im a 61 year old beginner. Can someone tell me why, when i load image to screen its all in red includind background. Then if I hit start, It may take hours to complete even a simple image or file. Frustration is quick;y setting in. Thank you. L Running a 40watt diode. Machine is Yora 6550
I have the v4.6.2 version and it doesn't show any of these features or look anything similar. Anyone have a link to V4.6.2 version tutorial? (Good vid btw, just not the right version).
Hello There is someone who knows why a CNC machine I built does not cut or burn circles or squares and drawings symmetrically. Oval and rectangular: I use Arduino Shield and ugsplatform Thanks
Best video for actually understanding how to use this software with my machine. Thanks.
Thank you SO much for so thoroughly explaining this software. I was feeling pretty lost up until I found your video. Thanks again.
I was just about to throw this out the window!!! Your video helped me figure it out. Thank you so much for ending my frustration!!!
Brother, this was super helpful. Thank you for taking us through the program step by step.
Thanks for taking the time to put this together. You have answered quite a few questions that i didnt even know i needed to ask. Thanks again!
Super useful for the beginner; particularly if you’re making your own CNC laser from scrap (so lower tolerances). Thanks!
Thank you very much for posting this informative video. I learned a lot.
This video was very helpful to a newbie
You made this program so much easy for a first time user and i wish the best
Thank you so much for the tutorial! Do you have one for making stamps?
Thanks for these tutorials! Very helpful! Can you tell me how to get the background of my images totally blank? I seem to keep getting a very faint background
I have a question if u have a minute my friend.. When I plug in and switch on my Sculpfun S9 the laser is already on and burning up the object right below it. Is there something I can do to stop that or have I rewired it wrong. I took it apart to have a good look under the hood to see if the board inside was compatible with a CNC Router Spindle but since I connected it back up the Laser is working before I've ever hit the connect button. Nothing moves but the Laser is on full power too btw. This thing burns like a good thing.
Could u give me any advice? I'd be very grateful if u have any.
Thanks for uploading these videos bcos I'm way behind the curve when it comes to tech stuff. Really bad tbh.
So about 1/2 hour ago i ordered an Atomstack lase, my first, hope the learning curve is not to steep for an old man, I see this as a huge fun then to add to my woodworking and your class has helped me a lot ....Wish I knew what some accessories I need for my new toy perhaps you might have a list? I can ask Atomstack, they will say everything. the Air assist looks like a aquarium pump...
Not all laser heads are designed to use air assist. It does very much help with cutting though. a 40 watt aquarium pump is plenty.
Accessories:
- Calipers
- metric small tape measure
- Borax
- Aluminum foil
Thank you! Very helpful!
Nice work. Thanks Teach.
Great video. Could you do a add-on on LaserGRBL version 7.X.X. There seems to be a lot of changes between 3.x.x and 7.x.x. Thanks
@@richardbrown2290 It is coming!!
We can download any image from internet,or how to make image which we want to engraved.thanks for this tutorial
Thank you Anthony your clear tutorials saved me a lot of headaches, I wonder, do you do tutorials on things like stepper vibration etc. ?
Thank you! Helped me a lot,
Brilliant video , I have atomstack x7 pro !
Looking to cut some 6 mm wood! which of the programs within laser grbl would you recommend for cutting ?
Anthony, Have you found a way to still use Windows 10 with Laser GRBL after the latest Microsoft upgrades? My Engraver is dead in the water!!
Thanks
Darryl
Hello,
I recently got an Atomstack 5A Pro and am trying to use the LaserGRBL software. At least I got the laser to work - that's about it. All he lasered was a line :-(. My question - how can I set the program?
The laser drives to a corner, stops because it can't go any further, but wants to keep going and starts to rattle.
Sorry for my English - I'm from Germany and I'm translating with Google
Anthony, I need help. I installed the driver, but it still won't connect.
Awesome video btw...
have you worked with the new 20W Ortur Laser Master 2 what is the best setting to cut 4mm foamboard
150mm / m?? 100% power. 1 pass.
Thank you for the information GREAT LESSON. I still don't know how to import pictures or line diagrams into the program.
This was such a huge help to watch. I will definitely go to your page for any laser engraving questions I need. Can you do a video on air assist for laser engravers (if you havent already)? I have a chinese 5000mW model and am trying to figure out what air assist options I have and how to even use air assist
I can go over air assist options.
Thanks for that Anthony, am a new user and your explanation helped heaps. One thing you could maybe do a video on would be to start from beginning to end slowly with Inkscape, it would help a lot. I am trying to learn as I want to make the dolls houses and other items like your lit up tower but you are too quick for beginners I think. Good stuff really enjoyed your videos excellent.
Excellent video!!! Thank you!!
Tony, trying to help a friend get his machine to home. The code shows $22=0 where and how does he change it to $22=1. ?
Use the console on the left. type in $22=1 and it should respond - OK
Did you ever make a video showing how to load the material DB settings into a job? Thank you
Have another video for initial setup for first time users? I'm curious how I can tell if I actually received a 20w laser. How do I know what baud rate to use?
instablaster...
On Diode Lasers, the Rating is usually the laser's power consumption - not it's output. For a 20 W Diode Laser, the output power will be between 5.0 to 5.5 W. On the Baud Rate - unless you have a very old computer, use the fastest Baud Rate.
Really helpful video, thankyou. Have you engraved laserable rubber on your machine? I have an atomstack 20w and tried to make my own rubber stamps but struggling to achieve satisfactory results. My last effort seemed to be going ok but had to do 7 passes, taking half an hour a time and on its last pass it had moved a millimetre despite being taped down and made a mess! I'm wondering if I can get more depth per pass with different settings. I had it on 4000 mm/? 100% on dithering with a speed of 750. I'm not sure if 'flare ups' at this slow speed burned my fine details away too as it got deeper or if it happened on that last pass being moved. I don't want to waste any more of my A4 rubber sheet :( Or is there a better material to use on a 20w which would make a good fine detailed stamp?
Just go slow and do like,, 12 lines per mm to make stamps. Orange rubber works great.
Thankyou. I've only been able to source the grey one here in the UK but I'll try those settings on it.
Can you tell me how to do a perimeter run without the laser marking up a piece of leather? as it forms the square I can see the laser marks of the square Thank you
How do you know what settings to choose? Im brand new and dont understand any of this
Got your vid from google/you-tube and still have many Q which sure you know answers. So how do I select whatever in lasergbrl and flag as burn or cut... How to select laser level/speed for items? Bought engraver but now trying to figure how to use. What you did do was very good but doesn't get me doing anything yet.
Hi mate thanks for sharing your videos, I have a ortur laser 2 , and I have grbl as software I have dyslexia ,and I like to say your instructions are very good, I’m making a lot of mistakes, do you think lightburn would be better to learn on , many thanks Neil
Lightburn is a little bit more to learn but it is worth it.
What happens if my engraver or laser is not printing or engraving it’s going through the motions but not printing anything.
thank you for perfect video help very well,my question i have neje master 20w and the setting right now you show can i lso use for mine device ?
Try 8 lines/mm 2400 speed 1bit dithering
@@brakthehun thank you for answer sir but now show in screen No connection because of target machine actively refused it? what i have to do?
With the NEJE,, there is a special update from the NEJE website to use LaserGRBL on it.
wiki.nejetool.com/doku.php?id=nejelaser_master
Scroll down to GRBL controller for windows or mac.
Hi sir,@@brakthehun dosnt work still says machine actively refused,
Hello, thank you for taking the time to make this tutorial it is very helpful. I am wondering if you can help me with an issue I am having. My machine will run but nothing is burning or showing up on the material. Can you help me fix this issue?
First,, check your max S setting by typing in "$$" to your console. Look at what $30 returns. Make sure to set your Smax in the second setup screen to that value (typically 1000). Try using a slow speed like 200 or so. If things still do not burn,, you may have a bad diode.
I just bought a new laser but im missing the setting for birch on the engraving options. How can I add this on or what is the best closest option. please please help!!
What power is your laser?? It's best to do tests.
Hi m8 is there any way of finding out exactly what lazer I have so I no I need to be seting stuff to all I no is 5w 500
There are so many lasers. Even thesame laser as another may engrave a little differently. I would suggest doing small tests on a sacrificial piece of wood.
@@brakthehun ye I think I found it or at least for wood I’m using but I found no mater what I’m doing slow and as low as possible seems be best way if I’m rite lol
Sorry stupid beginner questions but ther any way in laser gbrl or wood u do a video on how to do/create a simple business card I wanting to do my own on plain white card just simple image and text but I having bit trouble working things out
Would you be able to help me? I’m trying to make a plaque for my job and I really don’t know what to do even after this video. It keeps coming out blank and also not going the right way
What material is the plaque?? There are very few lasers out there that will etch metal.
@@brakthehun I believe it’s acrylic. Do you have a discord or email I can send you pictures on?
@@jonnpaper3142 brak_the_hun@yahoo.com
What color acrylic??
@@brakthehun It’s red, I’m not really sure how to engrave and make it nice. It comes out really sloppy. I’m just trying to make warning plaques for my job
Thanks for the gd video. That helped a lot. Do u have any videos Transformation of a regular picture in the gray scale?
I might make one. There isn't too much to it.
Ok thanks
Good day, I like to know more about using G0 Z-1 feature, do you have a tutorial on this?
Can you tell me how you got the parameter custom button?
The latest version of LaserGRBL has them by default but I have a video that shows you how to make them: ruclips.net/video/wKgJeqJv_y8/видео.html
This was before they defaulted to have a perimeter button.
@@brakthehun got it.Thank you 😁
There comes a time when you want/ need to change your mind and go back to change a selection. Is there a way ? I been exiting abd starting over. Can you ask the creator to maybe add this feature?
Hi when using laser grbl when I attempt to jog the y axsis the x axsis moves instead any ideas why this would happen?
@@kernowcoinringscornishcoin3999 what machine?? Is it different with other gcode senders???
@@brakthehun atomstack p7 only just set up machine yesterday and using laser grbl
@@brakthehun would the machine jog in accordance with the orientation of the picture I'm carving
@@kernowcoinringscornishcoin3999 it might be the orientation of the machine.
@@brakthehun machine as in the laser or my laptop if its the laser can this be changed
How do you darlin the laser or burn a little bit
Hi, my machine stops eventually during engraving. While the laser keeps burning. Resulting into a failure of engraving. Can you help me?
im using atomstack a5pro 20w.. i cant engrave right.. i tried using your settings but the image dont have enough quality . 😓 i hope you can help me
How are you getting different shades on your work? Every time I try to adjust my art everything shows as traced and no black shows in the art work
ruclips.net/video/llHOX42wVeY/видео.html
Hey! I followed the video and alls good!! However, when I'm lasering a circle shaped logo there is a small cut off and the line become crooked alittle. Do you have any suggestion on how I can solve this issue?
Check the belt tension and check the grub screw holding the sprocket on to the stepper motor shaft.
Maybe you can help me. I'm new to this. I have an Ortur Lazer master 2 S2. When I start to engrave it will start to run and randomly stop moving but the Lazer is still burning. I have updated the firmware but it's still happening. Thanks for your help. Todd.
Does it eventually start moving again?? It could be your stepper drivers overheating.
@@brakthehun No, just sits there. No alarm. It will do it on small projects just after it's turned on ?
I have an original ortur 20 watt Not the ortur 2 20 watt, and I want to make a larger frame. Can I change the bed size in the software to the new size?
Yeah. That's the $130 and $131 settings
@@brakthehun Thank you very much.
How do even get your pictures?
Thank you for the video!
Hi, thanks for this nice review! Arkypita
What is the setting to change the Framing speed in configuration?
right click on the perimeter button and change the F speed
@@brakthehun thanks brother
How do you know what laser you have?
Which version of GRBL is this video for? I have V 3.8
it looks like it was 3.8. It says up top.
Hey , I m sorry for my bad english. I put youre settings from the video on my machine 2.35 min. But it gos crazy fast en it look like it is stretches out. I m trying all ready al day but i cant fix it. Can you help me?
You may need to set your microstepping. There are use pins underneath the drivers.
@@brakthehun Hi, thnx for youre reaction. I dont get it good. whatever i try . Do you have a possibiliti to help me?
I hope you can !
@@savannawagenaar1988 did you set your microstepping pins?? Which controller board do you have??
Okay so I got the driver installed ect.. but all my button on the bottom are gray..?? Not in color says it disconnected?
You may need to select the right COM port
Do you know how I can speed things up, I followed along here, and selected the plywood as my material, shows 80% power and 2000mm speed, however mine runs real slow and on the DRO the F max's at about 300 and everything is real dark and burnt. The vector part seems to work, TIA
What machine do you have?? What are the $$ settings?? I just made some GRBL shield videos that might explain how to get the mzx speed from your setup.
@@brakthehun I have a cheap 3018Pro, My max speeds are set to 2500mm/m, I'll go look at your videos, but seems very slow compared to my K40 laser. The goal of this machine was to be able to drill my crib boards then engrave them without changing machines. I do that now and it is a pain to line up.
@@Hoss_1966 you can up the max speed on most of those to 4500 ($110=4500 $111=4500)
I've had a few 3018 and 4018 machines and the seem to run fine at those speeds.
heres a video to my settings drive.google.com/file/d/1GITXnQJXz4VAuh4C6qciX2bdXqf8H2na/view
@@brakthehun i'll try that, but on the DRO shows barely goes above 100
Hi, -Great tutorial
Any ideas how to find the line number it has got to when my laser stops working sometimes part way through a program.
You show how to start from a specific line number but not how to find it
I am using the latest version of laserGRBL (version 4.6.2)
Regards
Bob
File: Start from position
So with LaserGRBL I cannot position the image anywhere on the grid. So, for those of us who have the Pro version with the smoke alarm right by the Home (0,0) lower left corner; it detects smoke as soon as it starts because the etch/burn is within inches of the detector.
Can I move the image anywhere on the grid? Other than that, thanks for the video.
See 6:30. The offset feature.
It would be great if you could account for kerf in Lgrbl software instead of in my artwork. Or maybe you can...?
How to do re-homing. Please help
When I follow your video and open a file I do not get the option window that you show with all the settings. Can you explain why?
You have to open an image file. SVG files act different
Lasergrbl doesn't do portraits on my cnc-3018pro as you stated. Everything I tried failed to produce a decent portait.
The 3018 is a very slow machine. It will be difficult to get a good portrait with it. You will be best off using a 500mw 400nm ttl laser.
Hi, please can you tell me if lasergrbl supports dxf file for cutting
Nope. It does support svg though
Can you please share the code for the perimeter custom button i see there? thanks
Can I cut with this program?
Yeah. You need an svg or gcodefrom another program.
The centreing and framing buttons are grey in laserGRBL even when successfully connected to my atomstack. I have just set it up for the first time. Does anyone know why this might be?
Load a file first.
Make sure you're communicating
@@brakthehun Thank you
Can the parameter, homing and focus features be added to the software?
I believe they are included with the software now.
Right click near the button area and click import
The navigate to:
C / program files(x86) / LaserGRBL
Scroll all the way down and there should be a button file
Tony when I click on Laser Configuration it says Error reading configuration. also homing is not set up I can't even move the gantry in any direction. Please help.
Sounds like you may need to flash firmware on your board.
I need to add a perimeter button and just trying to figure out how to make the wood-burning a little bit darker and I don’t know if either one of your former coworkers are used to live in North Carolina are you can look me up on Facebook
Go slower to go darker
I have a video for buttons:
ruclips.net/video/wKgJeqJv_y8/видео.html
Ok
Hi There. Can I use this for my pen plotter.
Not quite yet. You need a delay for the pen to come down.
@@brakthehun Thank you for the quick reply. I like the features in there and would like to adapt it for my pen plotter. Love the picture feature.
@@MrLeopain Inkscape 0.92 and the Jtech laser plug in can do pen plotter things.
can it be change from MM to inches
I don't think that option is available. You might request it on the github site.
Hi, Im a 61 year old beginner. Can someone tell me why, when i load image to screen its all in red includind background. Then if I hit start, It may take hours to complete even a simple image or file. Frustration is quick;y setting in. Thank you. L
Running a 40watt diode. Machine is Yora 6550
What is baud rate?
Thanks again
Hi, what do I do when my parameters is not showing?
Try typing in $axes - you may have a different board
how do you get the file to start from "0"? For some reason every new dfile I put in starts from like x:10 Y:20 :(
Check the second optipnls page. There may be an offset
Ola Tony parabéns pelos vídeos.
Gostaria de controlar cnc pelo wi-fi(sem fio) Esp01- você pode nos ajudar?
Are you using a com bridge??
Telnet??
Bluetooth??
@@brakthehun Bluetoot/hc 05não trabalha no lasergrbl
Wi-fi sp01 precisa Configurações ainda não consegui
Please ask the creature to add a " TEXT" command and a GO BACK command.
Exactly!!!!
I cant get my machine to do any laser i checked the connections and everything seems okay can you tell me whats going on please :(
I would need to know some more info. What laser do you have??
@@brakthehun I have Ortur Laser Master 2
Can you do text on grbl?
Why does my lasergrbl not look like this? Mine is a grid with 4 quadrants, not a blank tan canvas.
Cause we got the upgraded version! I wish they would give us a tutorial on how to use the newest one. I just got this printer yesterday! I’m stressed
Hello, this application works on linux
I'm not getting any message that says unlocked, I'm only getting $X
I want to write name like Al Meher how I will be ngrave?😊
thanks, that helps a lot !
I have the v4.6.2 version and it doesn't show any of these features or look anything similar. Anyone have a link to V4.6.2 version tutorial? (Good vid btw, just not the right version).
so this software does'nt allow for Fonts??
It's not design software. You can use fonts in Inkscape / Gimp / paint / Word
Hello. How to do cutting settings? Anybody can send me to the video where i can see the depth of cutting, laser height etc. settings? Thanks!
Hello There is someone who knows why a CNC machine I built does not cut or burn circles or squares and drawings symmetrically.
Oval and rectangular: I use Arduino Shield and ugsplatform
Thanks
What stepper motors did you use??
What gears did you use??
What are your $$ settings??
Cool
how to installl this software?
Windows only.
lasergrbl.com
why when I hit connect and and it is connecting then it says disconnected why thanks
That usually means the wrong COM is selected or the firmware is not responding.
ruclips.net/video/TmCapBR0cfY/видео.html