Getting started with LaserGRBL software. All you need to know!
HTML-код
- Опубликовано: 29 ноя 2021
- A detailed video lesson about how to run LaserGRBL software.
Parameters and settings
Learn more about Endurance lasers
EnduranceLasers.com
Endurance-Lasers.com 
Наука
Perfect introduction to this program. You described the basics. Just what I needed. Thanks!
Thank you for sharing, I would like to know how to change the scale or size of engraving letters using grbl Thank you
Awesome, thank you for sharing!
My pleasure!
Thanks to ur video I was able to connect ur owesome brother !!! Thank u ! Tryin to figure out how to engrave actually bit finally connected thanks
Can you do a video on setting up the configuration?
Did the grbl come up blank?
Did you figure it out?
Thanks 👍
Has the machine got to be connected before you can start using the software to make adjustments and import project's??
Thanks for the video. Can you make one one engraving silicone bracelets?
Does this softwere work on other laser machines or only for your laser machines?
Hi I found you video very interesting thank you
Can you show how to create custom button say for laser 50% Laser 70% etc
Thanks
Hi i dont have an Endurance laser but im havin issues using LaserGBRL, if i change the Image size sometimes i just see lines of the whole Picture instead of the loaded Picture itself. If i scale it up it works but i want a small Picture, any advice would be helpful.
Jow do you adjust power?
i noticed that when you connect , that it says ortur master 2 ready , i have a sculpfun s9 which i just bought ,running on lasergrbl ,but it doesn't show up when i connect , would this make a difference , it says i have the latest update and my engravings have lines through them as if the laser is missing spaces , can you assist me please , sorry to bother you.
What about the offset?
It’s right under size.
What do I set the offset to?
I can’t create a frame at all. The laser just move to the side; not cack or forward. Did I did something wrong?
Can you give me the link for adding onstop? Pls help me🙏
How do you choose the different materials please
How do i cut through thing wood with this program?
Can you engrave acrylic discs with the laser or would a Cricut engraver be the only way?
You can actually , you just need to find out the power capacity
Hi new to laser engraver in GRBL HOW do I get the preset Designs to burn? There free with download right?
why does my background show checkers? also it doesnt engrave there but the machine thinks there is something there.so it adds more time. your background is solid pink
hello please tell me how can i use GRBL to engrave maps on wood
How do you engrave an item actual size??
How do i set the machine to a start point or origine.
Does it work on mac book?
Which file type we can upload?
Can i create text in this program?
How to reset LaserGRBL configurations (My setup for my Sculpfun S9 iw wrong)
Please, how to fill text?
Thanks for the video on getting started, But you ended to soon What Do I click on next to start the laser?
The green arrow button
Send to laser
Can you write and edit?
Hello, I downloaded laserGRBL today and tried to install it but Windows defender would not let me install the software. How can I work around the Windows defender? Thank you in advance
I am not sure, did you talk to LaserGRBL guys? lasergrbl.com/
I had to remove the block. I just got a windows 11 computer and it's much harder to get this program set up on it. I'm really upset about my purchases
Why am i getting lines through every photo i try to use?
How to get the software
Does this software also work on windows 11?
Yes
Please HELP. Driver install failure! Driver Setup. Instaling 4.9.4 Laser GRBL on a new computer using Windows 10. Install CH340 Driver (Jiangsu Qinheng Co., Ltd which showed CH341SER.INF. This driver will not install. Any ideas what or who I should talk to about this setup?
U gotta follow this video it wad a nightmare for me too u gotta figure out what com u are like com1 com2 com3 ect so on top left check what com u have missing when u unplug the machine from ur computer mine is com3 and then it should connect once u set it on the right com
My device is shown in the device manager but does not connect in the laser software
In the top left corner, click the dropdown box for COM and try selecting a different COM number and click connect again.. My default COM didn't work but COM 7 does.
I want to engrave on bracelets. But how can you engrave very precisely on the item? How do you know where to put your item?
I don't want to go wrong or go crooked.
From 1:36-2:30 he talks about the bottom buttons. Especially last one ca be helpful for your aiming. Wear glasses!
My software doesnt bring the lower functions/commands. How do i hi about it?
you need to import the configuration file
I'm having the same issue. Did u get this fixed?
Bro it looks like you’re figuring out how to use it your not explaining anything
Nothing on laser power or homing position
Yeah I selected proper com and connected but the grbl configuration window is blank..
Did you figure it out?
Still not clear how to cut with LaserGRBL...
How do I connect my port or my machine was running now I can't connect to lazergrbl
WTF is "dynamic power" whats the s in s min s max? I assume "border speed" is traveling, none working speed and filling speed is working or burning speed? you just skipped the important stuff or what is troubling me.
All i need to know is not included in this vid. getting started is. maybe change your heading.
Does anyone else see their status as alarm on the program when they connect the laser to their computer?
I do.did you figure it out?
sorry, but this is really poor explanation of LaserGRBL functions. Nothing that first time user wouldn't understand
This is a bad tutorial.