Ordered mine on Friday and received on a Thursday. Not bad for freight shipping to my house. And the way it was all packaged was amazing! Can't wait to color match my 2 tone RAM and install it!
@@daasebre We have more armor available for this truck. Including a Rear Bumper and Heavy Duty Skid Plates. ironman4x4america.com/exterior/armor/raid-rear-bumper-kit-suited-for-2019-ram-1500/
Instructions unclear. You said, "snug everything down till you have it in place, then lock it down when you are happy". I am having trouble with the, feeling happy part. Jordan might be my spirit animal.
This is the nicest looking bumper for a 4th gen ram 1500 hands down. I’ve been looking for almost 2 years and everything on the market is either 3 piece Chinese metal or just tacky.
Glad to see this bumper on a 4th gen. Right now they are out of stock ? Did you stop producing them or are you planning on selling them again? Ist there a way to ship one of those to Germany ? Greetings from Bavaria
We do not ship to Germany. Thank you for reaching out! There may be other dealers in Germany that sell Ironman 4x4 products. I found a company called Genesis Import. Check them out for more information.
Looks great. I’ve had an “Iron bull bumper” on my 4th gen ram 1500 for several years. Been looking to give my truck a refresh and this bumper without a doubt hits the mark. I can’t wait to order and install. One question, and not a deal breaker by any means, but I have a 30” light bar, will this fit? Thank you.
@@Ironman4x4America what is the current lead time for this bumper? Or, do you guys have them in stock and ready to ship or is it currently made to order? Thanks.
I want to fit this one on my 2012 Ram 1500 Regular Cab 4x4, but it says it is not compatible? Is the frame from the 2012 built different from the 2014?
Just below the headlights and grill it's about the same. But down low it is much more tucked up and away compared to the stock bumper providing better approach angle.
@Ironman 4x4 America Cool yea approach angle looks great, more it's for the tight squeeze in my garage haha, I think the factory bar on mine is 120mm from the base of the grill to the edge
I'm in the middle of doing research to fit this onto my 3500. You can tell immediately that you'll have to trim your grille bottom corners or swap in a 1500 grille. The chassis mounting points look similar between 1500 - 3500. I'll report back with findings.
Ordered mine on Friday and received on a Thursday. Not bad for freight shipping to my house. And the way it was all packaged was amazing! Can't wait to color match my 2 tone RAM and install it!
I bought one of these bumpers after we hit a deer and destroyed the plastic bumper. This bumper is built very well. I highly recommend it.
this is one of the nicest steel bumpers I've seen for the 4th gen ram
Thank you!
@@Ironman4x4Americado you guys have plans to come up with a rear bumper for this?
@@daasebre We have more armor available for this truck. Including a Rear Bumper and Heavy Duty Skid Plates. ironman4x4america.com/exterior/armor/raid-rear-bumper-kit-suited-for-2019-ram-1500/
@@Ironman4x4Americahey i just checked you guys don't ship to Canada
this does look good. I have a winch from iron man its disappointing. i wounder about the bumper
This is quality, I’m going this route instead of the dirt king prerunner bumper now
Thank you for your business!
By far the best bumper I’ve seen
Thank you!
Instructions unclear. You said, "snug everything down till you have it in place, then lock it down when you are happy". I am having trouble with the, feeling happy part. Jordan might be my spirit animal.
Just canceled my dirtking prerunner bumper this is exactly what I was looking for looks killer, might add a brush guard to it
So wanted one I hope they keep making them
Nice bumper, cool install.
This is the nicest looking bumper for a 4th gen ram 1500 hands down. I’ve been looking for almost 2 years and everything on the market is either 3 piece Chinese metal or just tacky.
Thank you!
Just put an order in for mine. Super excited!
Thank you for your business!
@@Ironman4x4America any plans to make a rear bumper for this model ram?
@@coreykinnamon2609 Yes we have one coming in the near future. Stay tuned!
Very nice bumper and great install guide.
I need this restocked like yesterday
very well explained
Thank you!
Those holes are for access to the screws on your headlights to adjust them
Wish they would release this bumper again....
This bumper looks incredible, but do you offer alternate trim panels for 09-12 Rams?
At this time, we do not offer alternate trim panels for 09-12 RAMS.
@@Ironman4x4America Thanks for the response! I believe such trim panels would also accommodate the Rebels... ;)
Glad to see this bumper on a 4th gen. Right now they are out of stock ? Did you stop producing them or are you planning on selling them again?
Ist there a way to ship one of those to Germany ? Greetings from Bavaria
We do not ship to Germany. Thank you for reaching out! There may be other dealers in Germany that sell Ironman 4x4 products. I found a company called Genesis Import. Check them out for more information.
Looks great. I’ve had an “Iron bull bumper” on my 4th gen ram 1500 for several years. Been looking to give my truck a refresh and this bumper without a doubt hits the mark. I can’t wait to order and install. One question, and not a deal breaker by any means, but I have a 30” light bar, will this fit? Thank you.
Hello and thanks for reaching out! The RAM front bumper is designed to fit up to a 32" dual row LED light bar. Hope this helps!
@@Ironman4x4America what is the current lead time for this bumper? Or, do you guys have them in stock and ready to ship or is it currently made to order? Thanks.
In stock and ready to ship! ironman4x4america.com/raid-front-bumper-kit-suited-for-2014-2018-ram-1500/ @@Ram-vt3rm
Do you know if the air suspension handle well the bumper weight?
You would need to check with RAM to see what weight range the suspension is designed to support from added accessories.
No it will not, it will end up popping, I just swapped my air suspension for the Ironman stage 2 foam cells
I want to fit this one on my 2012 Ram 1500 Regular Cab 4x4, but it says it is not compatible? Is the frame from the 2012 built different from the 2014?
Wanna send me one to put on for Overland Expo west 😭😭😭😭 coming out with a youtube video for the airride delete
Love it! Stop by our booth and say hi!
@@Ironman4x4America I'm going to slap this on my 2016 Rebel. Will have to modify a bit but wait for it ❤
@@Trav3l2Liv3 Awesome! Send us pics when you get it installed, love to see it.
@@Ironman4x4America ordered it last night and will do. Thank you guys 🤙
Is this bumper available for a 2011 Ram 1500 ?
Will this fit 3rd gen Ram?
You said be careful and safe but you have no PPE. I'm just teasing.
He has it built in the beard.
Would this fit a RAM Warlock?
It should fit all of the 1500 Classic/DS trucks including your Warlock edition.
Would this Bumper Fit 2010 Dodge ram 1500 Trx4 ? The drop Down menu only has Dodge Nitro listed. The vehicle search.
The RAID Front Bumper is suited for the 2014-2018 RAM 1500 DS truck.
Does it stick out much further if any at all than the stock bumper?
Just below the headlights and grill it's about the same. But down low it is much more tucked up and away compared to the stock bumper providing better approach angle.
@Ironman 4x4 America
Cool yea approach angle looks great, more it's for the tight squeeze in my garage haha, I think the factory bar on mine is 120mm from the base of the grill to the edge
I have a 1500 non. 4x4. But I have a 3500 dually 4x4. Can then same part number fit? Thx
Unfortunately, it cannot fit.
Owe a 2003 dodge ram wellyou ever make a bumper for them front and back
Not sure if we have anything coming for an 03. Things can change though :)
They're out of stock 😢
Does this fit 2019 Ram Rebel?
If your truck does not have the the Nivomat Air Ride System, you will be okay to fit our suspension kit.
make bumpers for 2500/3500 I would buy now if you had them this beautiful for big boys trucks
I'm in the middle of doing research to fit this onto my 3500. You can tell immediately that you'll have to trim your grille bottom corners or swap in a 1500 grille. The chassis mounting points look similar between 1500 - 3500. I'll report back with findings.