Hey guys, does anybody know how to write a G code for ender 3 S1 pro I would like the bed to move forward when I click pause instead of automatically goes toward it back I use orca slicer 2.0 thank you.
Is it true that Qudi is using a version of klipper from 2018 or something? Someone said their firmware is very old and cannot be updated to a new klipper.
I'm not sure what version of klipper they are using, but I did heard from other people that they are using older version. I'm not sure about updating to newer version of klipper though.
not sure why you kept getting clogs...must be something with your filament, i just pushed over 150 hours on the q1 and not a single clog even with glass and carbon fiber infused filament..
@@Scratch3DPrinting there are also a ton of people that can't seem to figure out how to get the timelapse to work.. 1.create a directory in qidi slicer (ive only done it in qidi slicer thus far) 2.keep qidi slicer open while printing 3.at the end of the print in the timelapse tab under *device> click the (render) button save to your computer and now you have a timelapse
Nice review, but your scoring honestly sucks. No printer should ever be able to get 10/10. You're just setting the bar way too low for the scores to be meaningful. And with such a first layer breaking apart, it should get a 5/10, not 9/10. Again, not the printer's fault, just your scale being way too forgiving ...
Thanks, the scoring is based on my opinion, and how useable the 3d printer is it to me. If a 3d printer can print nicely out of the box with no problem or no second tries then it gets a good score. Let's say if I have to adjust the z offset for the first layer in order for it to even get the first layer printed and I have to reprint it multiple times then yes it would have scored lower, but it did well on the first try. I'll also try to make a better scoring system.
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Nice review, I really liked the tolerance tests... I can't wait for my Q1 to show up this weekend!
Thanks. The tolerance is good on the Q1 Pro, you're going to enjoy it!
Your video was more in-depth than most youtubers, honestly
Keep up the great work 👍
Thank you, I tried my best to get the information I would want to see if I was watching someone review a 3d printer.
Hey guys, does anybody know how to write a G code for ender 3 S1 pro I would like the bed to move forward when I click pause instead of automatically goes toward it back I use orca slicer 2.0 thank you.
If you can access the Pause g-code macro, you can just edit the position in there, it's easier than re-writing a whole g-code file for it.
Is it true that Qudi is using a version of klipper from 2018 or something? Someone said their firmware is very old and cannot be updated to a new klipper.
I'm not sure what version of klipper they are using, but I did heard from other people that they are using older version. I'm not sure about updating to newer version of klipper though.
Can it print Ultem? The specs are so close that it can. The printer.cfg can be pushed to 360C.
It could... but I don't have that filament to test out on the q1 pro.
Idk if youre printing top shut but if so dont. Theyre very hest sensitive trust me
Aahh, I printed with everything closed, might be the problem.
Nice Test! Which wood filament did you use for the box?
Thanks, it's from Eryone wood PLA
Love your enthusiasm.
Thanks.
not sure why you kept getting clogs...must be something with your filament, i just pushed over 150 hours on the q1 and not a single clog even with glass and carbon fiber infused filament..
Haha, not quite sure, I think is must be when I'm unloading filaments. A video of that is coming very soon explaining what actually happen.
@@Scratch3DPrinting there are also a ton of people that can't seem to figure out how to get the timelapse to work..
1.create a directory in qidi slicer (ive only done it in qidi slicer thus far)
2.keep qidi slicer open while printing
3.at the end of the print in the timelapse tab under *device> click the (render) button
save to your computer and now you have a timelapse
I want it ❤❤❤ 😅😅😅
It is a great 3d printer.
@@Scratch3DPrinting and you are great too 😉😁😁😁😁
Nice review, but your scoring honestly sucks. No printer should ever be able to get 10/10. You're just setting the bar way too low for the scores to be meaningful. And with such a first layer breaking apart, it should get a 5/10, not 9/10. Again, not the printer's fault, just your scale being way too forgiving ...
Thanks, the scoring is based on my opinion, and how useable the 3d printer is it to me. If a 3d printer can print nicely out of the box with no problem or no second tries then it gets a good score.
Let's say if I have to adjust the z offset for the first layer in order for it to even get the first layer printed and I have to reprint it multiple times then yes it would have scored lower, but it did well on the first try.
I'll also try to make a better scoring system.
I bet you loved the teacher who never gave a hundred
Nice review! Looks like a really good printer
Thanks, yes it has been great playing with this 3d printer.